Hi everyone,
Got the above message on a Galaxy Y GT-S5360 in the UK.
Always just used it as an MP3 player so never used it to make calls, etc. Was running Jellyblast V3 previously (had no network on that either) but decided to return to stock and use the phone.
Flashed S5360_XXLA2_OXXLA2_XXLA2_by_Doky.zip via ODIN so now have the following:
PDA: S5360XXLA2
PHONE: S5360XXLA2
CSC: S5360XXLA2
Android version: 2.3.6
Baseband version: S5360XXLA2
I’ve looked on XDA and throughout the internet but can’t find an answer. I am probably making a silly mistake. Not had this problem before with a long time flashing on my S2
Any ideas?
Thank you
Tim
Maybe you don't have a sim card? Haha
From: Somewhere In Neverland
Timbop37 said:
Hi everyone,
Got the above message on a Galaxy Y GT-S5360 in the UK.
Always just used it as an MP3 player so never used it to make calls, etc. Was running Jellyblast V3 previously (had no network on that either) but decided to return to stock and use the phone.
Flashed S5360_XXLA2_OXXLA2_XXLA2_by_Doky.zip via ODIN so now have the following:
PDA: S5360XXLA2
PHONE: S5360XXLA2
CSC: S5360XXLA2
Android version: 2.3.6
Baseband version: S5360XXLA2
I’ve looked on XDA and throughout the internet but can’t find an answer. I am probably making a silly mistake. Not had this problem before with a long time flashing on my S2
Any ideas?
Thank you
Tim
Click to expand...
Click to collapse
flash the correct csc, also try the SIM on other mobile
SaketJoshi said:
flash the correct csc, also try the SIM on other mobile
Click to expand...
Click to collapse
Thanks for the reply. The SIM card is fine. Works on another phone. How do I know which is the correct CSC? I assumed the one that was flashed match the modem and PDA.
Thanks
Tim
Timbop37 said:
Thanks for the reply. The SIM card is fine. Works on another phone. How do I know which is the correct CSC? I assumed the one that was flashed match the modem and PDA.
Thanks
Tim
Click to expand...
Click to collapse
was the package you installed compatible with your country?
SaketJoshi said:
was the package you installed compatible with your country?
Click to expand...
Click to collapse
Yes. It appeared to be. One of the CSCs was for carphone warehouse (CPW) which is where the phone came from originally.
Thanks
Tim
Timbop37 said:
Yes. It appeared to be. One of the CSCs was for carphone warehouse (CPW) which is where the phone came from originally.
Thanks
Tim
Click to expand...
Click to collapse
S5360_XXLA2_OXXLA2_XXLA2
European multilanguage build.
based on: S5360XXLA2_S5360OXXLA2_RST_S5360XXLA2_HOME.tar.md5
ro.build.date=Wed Jan 11 13:58:09 KST 2012
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
is this the one you flashed? it says something you have to do after flashing. did you do that?
SaketJoshi said:
S5360_XXLA2_OXXLA2_XXLA2
European multilanguage build.
based on: S5360XXLA2_S5360OXXLA2_RST_S5360XXLA2_HOME.tar.md5
ro.build.date=Wed Jan 11 13:58:09 KST 2012
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
is this the one you flashed? it says something you have to do after flashing. did you do that?
Click to expand...
Click to collapse
Yes, I did. I tried with the default first for Europe (EUR) then CPW. It then rebooted to the Android setup screen but I still had no network.
Thanks for your help. I appreciate it.
Tim
Timbop37 said:
Yes, I did. I tried with the default first for Europe (EUR) then CPW. It then rebooted to the Android setup screen but I still had no network.
Thanks for your help. I appreciate it.
Tim
Click to expand...
Click to collapse
the correct method is *#272*imei#
p.s. you can get the imei by dialling *#06#
SaketJoshi said:
the correct method is *#272*imei#
p.s. you can get the imei by dialling *#06#
Click to expand...
Click to collapse
Tried it again using CPW, XEU and EUR, without success. I have used the correct method and entered the correct imei.
Regards
Tim
Timbop37 said:
Tried it again using CPW, XEU and EUR, without success. I have used the correct method and entered the correct imei.
Regards
Tim
Click to expand...
Click to collapse
where did you buy the phone? in uk or outside?
SaketJoshi said:
where did you buy the phone? in uk or outside?
Click to expand...
Click to collapse
My father-in-law got it from Carphone Warehouse in Chester in the UK about a year or so ago.
He used it for a while with an Orange PAYG SIM then gave it to me. I put another Orange SIM in it but never used it as a phone and flashed a custom ROM immediately. I played a lot of music on it and have been trying to get a network on it. I have tried the Orange SIM I put in it and also an O" PAYG SIM which I bought yesterday. Both show no network available, whatever I dial.
Thanks again
Tim
Timbop37 said:
My father-in-law got it from Carphone Warehouse in Chester in the UK about a year or so ago.
He used it for a while with an Orange PAYG SIM then gave it to me. I put another Orange SIM in it but never used it as a phone and flashed a custom ROM immediately. I played a lot of music on it and have been trying to get a network on it. I have tried the Orange SIM I put in it and also an O" PAYG SIM which I bought yesterday. Both show no network available, whatever I dial.
Thanks again
Tim
Click to expand...
Click to collapse
well then contact the network customer service
Sir, Flash a good old stock firmware not the newests . Also try to change the kernel .
Sent from my GT-S5360 using Tapatalk 2
Its happening in europe all day, I cant get into detail but the Sun is whats causing it. Soft reboot/or flight mode ur phone couple times:sly:
Sent from my GT-S5360 using xda premium
Hello everybody,
I have a samsung I747M from Canada. I'm french and I'm using it here.
Data connexions are only in EDGE (the same as 2G). I want to have 3G data connexions. All the settings in the NPA are good.
I think the problem come from the CSC which is still the one attached to Canada (BMC).
All the firmwares are for Canada. I want to change the CSC (BMC now) to XEF (the one for France).
Does someone have an idea to fix this situation ?
Thank you and Merry Christmas !
PS : Sorry for my english...
You might have to carrier network unlock the phone.
Does the i747m support the carrier's 3g frequencies?
StoneyJSG said:
You might have to carrier network unlock the phone.
Click to expand...
Click to collapse
Thank you for your answer but my phone is already unlocked.
I'm using it in France with a local operator (Bouygues). Data connexions are only in 2G and not in 3G.
I think if I will change the CSC it will be good
audit13 said:
Does the i747m support the carrier's 3g frequencies?
Click to expand...
Click to collapse
I think so.. How can I know pleas ?
In network settings there are GSM, LTE etc
You can check here: http://willmyphonework.net/
audit13 said:
You can check here: http://willmyphonework.net/
Click to expand...
Click to collapse
I've checked and it works in 3G
I don't think it is a firmware problem because I took my s3 to London a couple of years ago. It was running stock bell firmware, network unlocked, and I was able to get 3G data connections without doing anything to the stock rom. Changing the Csc should not make a difference.
CSC Selection for SM-G955F/FD/N and SM-G935F/FD/K/L/S/W8 devices (all others untested!)
What is this for?
CSC stands for Country Specific Code, so every single country (and even different providers in one country) have different codes, for csc features, wallpapers, wifi calling, VoLTE, sounds etc. So it is quite important to have the right csc file on your phone for your provider (so you can have all features which comes with your provider (like wifi calling)).
You may ask yourself now, where can this be flashed on? Basically on every stock based rom, as well as on stock roms (who are rooted of course). So: root and a recovery (custom) are required!
Your current country is not listed below? Send me your stock csc file from sammobile.com (SM-G955F variant) and I will add it!
NOTE TO ALL DEVS: You are free to grab any csc you want from this zip, as long as proper credits are given and a link to this thread exist in your OP.
Features:
- CSC features will be added in upcoming releases
Following countries are supported:
OMC Multi-CSC contains:
"ACR", "Ghana unbranded"
"AFG", "Afghanistan unbranded"
"AFR", "Kenya unbranded"
"ARO", "Argentinia unbranded"
"ATO", "Open Austria unbranded"
"AUT", "Switzerland unbranded"
"BGL", "Bulgaria unbranded"
"BNG", "Bangladesh unbranded"
"BRI", "Taiwan unbranded"
"CAC", "Uzbekistan unbranded"
"CAM", "Cambodia unbranded"
"CHO", "Chile unbranded"
"COO", "Colombia unbranded"
"DBT", "Germany unbranded (default)"
"DKR", "Senegal unbranded"
"ECT", "Nigeria unbranded"
"EGY", "Egypt unbranded"
"EON", "Trinidad and Tobago unbranded"
"ETL", "Czech Republic unbranded"
"EUR", "Greece unbranded"
"ILO", "Israel unbranded"
"INS", "Indian unbranded"
"ITV", "Italy unbranded"
"KSA", "Saudi Arabia unbranded"
"LAO", "Thailand (unknown)"
"LUX", "Luxembourg unbranded"
"MID", "Iraq unbranded"
"MWD", "Morrocco unbranded"
"MYM", "Thailand (unknown)"
"NEE", "Nordic Countries unbranded"
"NPL", "Nepal unbranded"
"ORX", "Slovakia unbranded"
"PAK", "Pakistan unbranded"
"PHE", "Spain unbranded"
"PHN", "Netherlands unbranded"
"ROM", "Romania unbranded"
"SEB", "Latvia unbranded"
"SEE", "South East Europe unbranded"
"SEK", "Ukraine unbranded"
"SER", "Russia unbranded"
"SKZ", "Kazakhstan unbranded",
"SLK", "Srilanka unbranded"
"THL", "Thailand unbranded"
"THR", "Iran unbranded"
"TPA", "Panama unbranded"
"TPH", "Portugal unbranded"
"TTT", "Trinidad and Tobago unbranded"
"TUN", "Tunisia unbranded"
"TUR", "Turkey unbranded"
"XEF", "France unbranded"
"XEH", "Hungary unbranded"
"XEO", "Poland unbranded"
"XEU", "United Kingdom EE & Three branded"
"XFE", "South Africa unbranded"
"XME", "Malaysia unbranded"
"XSG", "United Arab Emirates unbranded"
"XSP", "Singapore unbranded"
"XTC", "Philippines Open Line branded"
"XXV", "Vietnam unbranded"
"ZTO", "Brazil unbranded"
"H3G", "United Kingdom H3G branded"
"OPS", "Australia Optus branded"
"TEL", "Australia Telstra branded"
"VAU", "Australia Vodafone branded"
Vodafone Multi-CSC contains:
"ATL", "Spain Vodafone branded"
"AVF", "Albania Vodafone branded"
"CNX", "Romania Vodafone branded"
"CYV", "Cyprus Vodafone branded"
"MOB", "Austria A1 branded"
"MTL", "Bulgaria MTL branded"
"OMN", "Italy Vodafone branded"
"PRO", "Belgium Proximus branded "
"SIM", "Slovenia Si.mobile branded"
"SWC", "Switzerland Swisscom branded"
"TCL", "Portugal Vodafone branded"
"VD2", "Germany Vodafone branded (default)"
"VDC", "Czech Republic Vodafone branded"
"VDF", "Netherlands Vodafone branded"
"VDH", "Hungary Vodafone branded"
"VDI", "Ireland Vodafone branded"
"VGR", "Greece Vodafone branded"
"VIP", "Croatia VIP-Net branded"
"VOD", "United Kingdom Vodafone branded"
"XFV", "South Africa Vodafone branded"
USA Multi-CSC contains:
"ACG", "Nextech / C-Spire branded"
"ATT", "AT&T branded"
"BST", "BST (unknown)"
"CCT", "Comcast branded"
"GCF", "GCF (unknown)"
"LRA", "Bluegrass Cellular branded"
"SPR", "Sprint (CDMA) branded"
"TFN", "Tracfone branded "
"TMB", "T-Mobile branded"
"USC", "USA unbranded"
"VMU", "Virgin Mobile USA branded"
"VZW", "Verizon branded"
"XAA", "USA unbranded (default)"
"XAS", "XAS (unknown)"
Canada Multi-CSC contains:
"BMC", "Bell Mobile branded"
"BWA", "SaskTel branded"
"CHR", "Canada (unknown)"
"ESK", "EastLink branded"
"FMC", "Fido Mobile branded"
"GLW", "Globalive Wind Mobile branded"
"KDO", "Koodo Mobile branded"
"MTB", "Belarus branded"
"RWC", "Rogers branded"
"TLS", "Telus branded"
"VMC", "Virgin Mobile branded"
"VTR", "Vidéotron branded"
"XAC", "Canada unbranded (default)"
"XSA", "Australia unbranded"
How-To install:
0. Have twrp installed/encryption removed
1. Having a backup (just in case)
2. Download csc selection and put it onto your phone
3. Boot into twrp
4. Install the zip file
5. Reboot
How to restore the EFS-Backup:
As you all know, during the csc installation an EFS backup is made by the installer. Most have no idea how to restore it, so here you go.
1. Boot into TWRP
2. Make sure EFS partition is mounted
3. Open terminal under advanced tab
4.
Code:
dd if=/data/media/0/EFSBackup/efs.img of=/dev/block/sda3 bs=4096
5. Wait until it's finished
6. Your previous EFS has been restored successfully
Download:
CSC Selection V1.1.0 on Android Filehost
Credits:
- Sammobile for firmware
- Samsung for basics
- amarullz for the aroma installer
If you enjoy this I would be really lucky if you would hit thanks :victory:
And if you really really like it, here is a donation link
:good:
PayPal
XDA:DevDB Information
CSC Selection SM-G955F, ROM for the Samsung Galaxy S8+
Contributors
Tkkg1994
ROM OS Version: 7.x Nougat
ROM Firmware Required: Custom Recovery
Version Information
Status: Stable
Current Stable Version: V1.1.0
Stable Release Date: 2017-07-12
Created 2017-05-11
Last Updated 2017-07-12
Changelog:
CSC Selection V1.0.0:
- initial release
CSC Selection V1.1.0:
- Added CHE multi CSC (chile multi)
- Update DBT (europe Multi csc), also BTU etc is now included
- Added DRE CSC
- Added DTM Multi csc (which contains most T-Mobile cscs)
- Added O2U csc (via wasn't in there, is there even a VIA CSC for the s8?)
- Added TNZ csc
- Added UPO multi csc (mainly south america)
- Updated VAU csc
- Updated VD2 csc (all vodafone carriers)
- Updated XAC csc (canadian cscs)
- Updated XSA cscs
- This release is fully compatible with s7 devices!!
- Added csc features to be choosen too. It works on most cscs but not on all. I will make this work on all (as they all use different folders etc it's hard to make it universal for all cscs)
Reserved
Thank you, Luca.
Awesome!
Good to have your again with the S8 series!
Do you have these updated csc/omc compatible for s7/edge with s8 ported roms?
Thanks for sharing..
everything works with Tmobile CSC..
only Wifi calling is not working.. it's showing connected, but when calls started it went off..
one quick question, if i remove the EFS partition files, it will automatically generate or end up in NO IMEI/MAC Address..
reason being i flashed mutiple CSC (the files from S7 Edge with little modifications) and got 2 times network locked Sim card detected error. Would like to clean up the EFS partition clean and try the S8 CSC files to check it's Wifi Calling works or not?
@Tkkg1994
Thanks bro.
Thank you Luca:good:
Your awesome!!!
`SBR` said:
Thanks for sharing..
everything works with Tmobile CSC..
only Wifi calling is not working.. it's showing connected, but when calls started it went off..
one quick question, if i remove the EFS partition files, it will automatically generate or end up in NO IMEI/MAC Address..
reason being i flashed mutiple CSC (the files from S7 Edge with little modifications) and got 2 times network locked Sim card detected error. Would like to clean up the EFS partition clean and try the S8 CSC files to check it's Wifi Calling works or not?
Click to expand...
Click to collapse
I wonder if it's similar process to get wifi calling to work as s7e
https://forum.xda-developers.com/showpost.php?p=69864872&postcount=5484
test
Good job man , that was great
So, I was in XSA stock ROM and both VoLTE and Wifi Calling was working. Now that I'm on your Rom(BatStock) and after flashing the XSA CSC, I still dont see any options to enable them?
Am I missing something here?
Thank you for this.
I had manually copied the ATT CSC over to the phone before I dirty flashed this. WiFi calling would not work at all, but the Enhanced LTE Services was enabled.
I tried to install the US ATT one on an international F model. It seemed to have problems. Not sure if this is normal or not so I thought I would post here.
Code:
Mounting Partitions
mount: failed to mount
/dev/block/platform/111200000.ufs/by-name/HIDDEN-at/preload: Invalid argument
Backing Up EFS...
Installing XAA CSC...
Changing model
unmount of /preload failed: no such volume
Your CSC is successfully installed
Please Reboot now
script suceeded: result was [Please Reboot now]
When I rebooted I got "Upgrading Android..."
After reboot I don't have the AT&T on the right of the Status Bar.
Looking at /efs/imie/mps_code.dat, I have ZTO in there? I expected ATT?
So under settings, I see WiFi calling greyed out. I select it and it comes up and says "Wi-Fi Calling - please try to setup Wi-Fi calling again later." Previously, WiFi Calling in Setup was greyed out. So this is a nice change!
I see Enhanced LTE Services checked! :good:
So I manually edited /efs/imie/mps_code.dat, and changed it to ATT and rebooted. Now I got the death star boot screen. and AT&T on the right of the status bar - at least after initial reboot, but then it disappears .
But WiFi calling still does not work.
Thank you for this!
Edit:
One other strange thing I noticed is that I replaced the /system/media/shutdown.qmg, bootsamsung.qmg and bootsamsungloop.qmg files with my own boot animation but it keeps using the death start ATT one. So I delete /system/omc/ATT/res and got rid of the death star boot screens!
duminduweera said:
So, I was in XSA stock ROM and both VoLTE and Wifi Calling was working. Now that I'm on your Rom(BatStock) and after flashing the XSA CSC, I still dont see any options to enable them?
Am I missing something here?
Click to expand...
Click to collapse
What does it show in the menu?
Does it show XAS active?
Flame Red said:
Thank you for this.
I had manually copied the ATT CSC over to the phone before I dirty flashed this. WiFi calling would not work at all, but the Enhanced LTE Services was enabled.
I tried to install the US ATT one on an international F model. It seemed to have problems. Not sure if this is normal or not so I thought I would post here.
When I rebooted I got "Upgrading Android..."
After reboot I don't have the AT&T on the right of the Status Bar.
Looking at /efs/imie/mps_code.dat, I have ZTO in there? I expected ATT?
So under settings, I see WiFi calling greyed out. I select it and it comes up and says "Wi-Fi Calling - please try to setup Wi-Fi calling again later." Previously, WiFi Calling in Setup was greyed out. So this is a nice change!
I see Enhanced LTE Services checked! :good:
So I manually edited /efs/imie/mps_code.dat, and changed it to ATT and rebooted. Now I got the death star boot screen. and AT&T on the right of the status bar - at least after initial reboot, but then it disappears .
But WiFi calling still does not work.
Thank you for this!
Edit:
One other strange thing I noticed is that I replaced the /system/media/shutdown.qmg, bootsamsung.qmg and bootsamsungloop.qmg files with my own boot animation but it keeps using the death start ATT one. So I delete /system/omc/ATT/res and got rid of the death star boot screens!
Click to expand...
Click to collapse
That error from script is normal. I found out that the preload partition does only exist on S8+ models so all s8 users will get that mount log, but it's not important since it's not used after all.
For ATT, I need you guys to help me out here, I don't live in the US, I don't have a ATT sim or whatever so I just started where we ended on the s7.
That was:
Original CSC needs to be ZTO, otherwise imsservice would constantly crash (this is maybe obsolent now?)
Anyway I'm open for all your suggestions as you are a proper ATT user!
Tkkg1994 said:
For ATT, I need you guys to help me out here, I don't live in the US, I don't have a ATT sim or whatever so I just started where we ended on the s7.
That was:
Original CSC needs to be ZTO, otherwise imsservice would constantly crash (this is maybe obsolent now?)
Anyway I'm open for all your suggestions as you are a proper ATT user!
Click to expand...
Click to collapse
Thank you for your work and for the quick reply. I would be happy to help. I am not seeing any crashes at all, and none for the imsservice. I see ims service 1.0 installed but I don't know if I am using it. Changing /efs/imie/mps_code.dat to ATT did not seem to cause any crashes - at least for me on the S8+ model F.
One other question to ask. Is there a recommended way to remove the carrier label on the left side of the status bar?
Shuthefrontdoor said:
I wonder if it's similar process to get wifi calling to work as s7e
https://forum.xda-developers.com/showpost.php?p=69864872&postcount=5484
Click to expand...
Click to collapse
Not sure the 1.8 files will write mps_code.dat as TMB, the latest ZIP will flash mps_code.dat as ZTO only for all US variants..
if i go and overwrite the mps_code.dat as TMB and reboot, i can see the Tmobile Boot logo.. but Wifi calling is still wonky.. need do a clean flash and test it.. will wait for BATSTOCK next update to proceed further.
NEMES|S said:
What about Video Calling & VoLTE? I only use Video Calling & VoLTE (rarely use WiFi Calling)
Thank You!
Click to expand...
Click to collapse
VoLTE works.. will give information about VideoCall when you open the dialer.. but i haven't used it.
Regarding ATT in the US. I had to call customer service and the nice lady said that their system would not accept the IMEI of my new S8 + since it was not a phone from ATT. I gave her the new IMEI and their system would not accept it. She ended up using the IMEI of an ATT S7 we had on the account and then Volte seemed to start working. I see Video calling is now also working .
I still cannot get WiFi calling to work - meaning when I try to enable it in settings, it sits for a minute and then says try again later. It will not enable wifi calling.
Tkkg1994 said:
What does it show in the menu?
For ATT, I need you guys to help me out here, I don't live in the US, I don't have a ATT sim or whatever so I just started where we ended on the s7.
That was:
Original CSC needs to be ZTO, otherwise imsservice would constantly crash (this is maybe obsolent now?)
Anyway I'm open for all your suggestions as you are a proper ATT user!
Click to expand...
Click to collapse
We can help to our extent..
I overrides the mps code with TMB but no crashes and I got the Tmobile boot logo...
Volte works (even if i modify the Csc of other region also it works).. WiFi calling says connected.. But not works.
If i select use only WiFi for calling, signal is cut off.. But calling not going through.. Says out of service area.. In the dialing screen..
Sent from my SM-G955F using Tapatalk
duminduweera said:
So, I was in XSA stock ROM and both VoLTE and Wifi Calling was working. Now that I'm on your Rom(BatStock) and after flashing the XSA CSC, I still dont see any options to enable them?
Am I missing something here?
Click to expand...
Click to collapse
fix it manully
Flame Red said:
Thank you for your work and for the quick reply. I would be happy to help. I am not seeing any crashes at all, and none for the imsservice. I see ims service 1.0 installed but I don't know if I am using it. Changing /efs/imie/mps_code.dat to ATT did not seem to cause any crashes - at least for me on the S8+ model F.
One other question to ask. Is there a recommended way to remove the carrier label on the left side of the status bar?
Click to expand...
Click to collapse
`SBR` said:
We can help to our extent..
I overrides the mps code with TMB but no crashes and I got the Tmobile boot logo...
Volte works (even if i modify the Csc of other region also it works).. WiFi calling says connected.. But not works.
If i select use only WiFi for calling, signal is cut off.. But calling not going through.. Says out of service area.. In the dialing screen..
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
Okay great so this workaround from the S7 is not needed anymore. I will delete my additional code concerning this than, thanks for the report!
For wifi calling, I'm pretty sure we will find the cause for this problem and error it out as well!
And about the carrier on statusbar:
Can be edited in: system/omc/ATT/cscfeature.xml
Flame Red said:
Regarding ATT in the US. I had to call customer service and the nice lady said that their system would not accept the IMEI of my new S8 + since it was not a phone from ATT. I gave her the new IMEI and their system would not accept it. She ended up using the IMEI of an ATT S7 we had on the account and then Volte seemed to start working. I see Video calling is now also working .
I still cannot get WiFi calling to work - meaning when I try to enable it in settings, it sits for a minute and then says try again later. It will not enable wifi calling.
Click to expand...
Click to collapse
Can you get a log during the time you tried to connect to wifi calling?
Would be great to see!