As promised, I have received the Aprolink case and here's my review:
First, the case comes in a box that transforms into a photo frame but I was unable to check this feature since I have no printed photos in that size. The instructions says that 3x5 inches photo will fit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second, the case is BEAUTIFUL! The color I bought is glossy white with red and I think it's adding a nice color to the all-white device.
The color really shows on this photo
The case has EXACT holes and cut outs for the 3.5mm headphone jack, USB port and tiny yet precise cut outs for the microphones (on the top and on the bottom of the device), a nice circle around the camera and flash and a split speaker grill cutout (that does not affect the sound output).
The volume buttons and the sleep/wake button are covered by rubber and are very easy to press. Volume buttons are slightly narrow so that might take a few minutes to get used to.
The case also has a lip so you can lay your phone on the table while the screen is facing down without worrying.
The camera lens are protected as well
IMPORTANT!!
I own an international Tegra3 device so at&t and One XL owners might experience a slight misalignment here and there!
For more colors and some information, Aprolink's official webpage.
they look awesome
Found some photos of the Sensation case (different design, though), still gives a nice overall feeling about the quality of the case:
http://forum.xda-developers.com/showpost.php?p=22360377&postcount=85
Hey those are sweet! Thanks!
Sent from my SGH-I777 using xda premium
After checking out the Sensation case in the link above and watching several videos of their iPhone cases I was very impressed by Aprolink's products and I have decided to order the case.
I guess this could take a while since the seller is shipping from Taiwan.
If no one else will do it before me, I'll upload some photos and a review when I'll receive it.
*Edit: Review added on 1st post.
Can you show more angles of the camera, protection looks minimal tbh
Ripley said:
Can you show more angles of the camera, protection looks minimal tbh
Click to expand...
Click to collapse
The lens are almost on the same level with the case so it's not that simple to catch on photo. It's not as protective as an Otterbox but according to photos it provides protection that competes with Case-Mate's Tough case.
Anyway, here's the photo:
If you want a shot from different angle I can try to catch it. A picture of the desired position (with a different case) might help as well.
Hmm it's more of a cutout than protection then. The cutout on my Rock Magic Cube has a 2mm lip that surrounds the lens, offering great scratch protection. Also, the cutout on mine is alot smaller, surrounding the actual lens diameter, not the bigger silver circle around it.
Oh well, thanks for the pic
Just ordered 1 should be here in 3 weeks
Sent from my HTC One X using Tapatalk 2
Received my white and grey one today, which was ordered on the 11th June - China to the UK in 7 days ain't bad at all.
Nice case, aside from the aprolink logo on the back being slightly skewed.
I was previously using the official HTC C700 hard case, which looks great, but is so damn slippy. This case just sticks to your fingers and makes one handed operation much easier.
Sent from my HTC One X using Tapatalk 2
pnnorth said:
Received my white and grey one today
Click to expand...
Click to collapse
Can you post some photos too? I'd like to see it in "real life". Especially since the red one which I have is slightly different shade of red from the one in the promotional photos.
On a side note, I have to agree about the ease of operation with the case. Definitely a case that was manufactured with functionality in mind and not that cheapo feel of various no-brand cases.
IdanK said:
Can you post some photos too? I'd like to see it in "real life". Especially since the red one which I have is slightly different shade of red from the one in the promotional photos.
On a side note, I have to agree about the ease of operation with the case. Definitely a case that was manufactured with functionality in mind and not that cheapo feel of various no-brand cases.
Click to expand...
Click to collapse
Will do, I'll try and take some in the morning.
Sent from my Galaxy Nexus using Tapatalk 2
Thanks for the review.
To make the case stand, you stick a card in the back of it?
Do they provide it?
junialum said:
Thanks for the review.
To make the case stand, you stick a card in the back of it?
Do they provide it?
Click to expand...
Click to collapse
Yes, you can stick any card as long as it's approximately 5.3cm long and it fits right in. Credit cards are great for that cause
A card is not included with the case.
IdanK said:
Can you post some photos too? I'd like to see it in "real life". Especially since the red one which I have is slightly different shade of red from the one in the promotional photos.
On a side note, I have to agree about the ease of operation with the case. Definitely a case that was manufactured with functionality in mind and not that cheapo feel of various no-brand cases.
Click to expand...
Click to collapse
I upload some pictures with the case actually on the phone later:
Edit...pics with the case on the phone.
Not the best pictures, my galaxy nexus is not the brilliant in low light (or maybe my camera lens cover just needs a damn good clean!).
Sent from my HTC One X using Tapatalk 2
Here it is in black/gray. The gray glows in the dark.
On a scale of 1-10 I'd give it a six or seven. The black is glossy and picks up swirls and scuffs easily. It holds the phone fine but there's a small amount of up and down movement. The button you push for power is pure show because when you push it all you're doing is pushing the flush inside of the case downward until it hits the power button. You get used to it though. The slot you stick a credit card in is very shallow - you need a thick unbending card for it to really stay in place and support the phone. Even then, using the touch screen without holding the phone with one hand will move the phone and knock the credit card out. It's really tippy in portrait mode. Overall I'd rate it good, not great.
Related
I know there are a few (<1mm) dimensional differences between the OEM and ma bell's variant. Anyone actually try to see if it fits?
EDIT:
So, just got the case, and glad to say that it is a perfect fit, save for the top mic being slightly covered (which is fairly immaterial imo).
The fit and finish are absolutely top grade. The case does not seem to affect radio signals nor accessibility of the battery cover, headphone jack, speaker and microphone.
It's important to note that the phone with the bumper on feels nice and secure in my hands. I have 'standard-sized' hands, and found the phone alone slippery, as if it were about to jump out of my hands at any point. After adding the bumper, grasping the side of the phone makes it feel much more secure and actually easier to use. Much less awkward.
On with the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Really big box for a small package inside.
Shows where to install foam tape.
Very nice and snug fit, with zero play- before adding foam tape.
Foam tape in place now that I know the phone fits well.
Perhaps they left this bare for a wrist strap? Though, I didn't notice a slot for one on the international version. In any case (pun?), the bumper case seems to extrude far beyond the exposed part.
Not the best angle, but the loudspeaker is perfectly centered, and fully exposed.
Note the mic port (bottom of phone). Fully exposed, near-perfect alignment.
The volume and power buttons are still easily triggered, although they seem recessed within the bumper. You have to use the cushioning of the finger, as opposed to the tip however.
Standard headphone jack fits snugly, without contacting the bumper.
The tiny bump on the back of the case, part of the headphone jack surround, provides a 1mm clearance. Since the camera module slightly protrudes, the actual camera clearance, at it's lowest point, is about a 0.5mm. While this is far from sufficient on a rough surface, it is good to know that sliding it across a flat surface such as a table or desktop will not damage the camera.
A good 1mm+ of clearance on the front side.
will be good.
u can order
thanks. hope i'm not a guinea pig here
let me know how it goes for you... i'd love to use one of these.
photos please!
Word of warning - I bought the case mate case with the metal back (http://www.case-mate.com/Samsung-Ga...-S-II-Barely-There-Brushed-Aluminum-Cases.asp).
Very nice case but killed GPS.
Without the case immediate fix.. with the case no fix at all. Had to get rid of.
I have a feeling all metal cases will have the same issue.
I wonder if that was just because of the metal back, or just metal in general. I hadn't read anything negative about the Taurus bumpers, in regards to GPS signal.
Worth testing though, having just come from a Captivate I'm a little sensitive about my phones GPS capabilities
Sent from my SGH-I777 using Tapatalk
Harbinger1080 said:
I wonder if that was just because of the metal back, or just metal in general. I hadn't read anything negative about the Taurus bumpers, in regards to GPS signal.
Worth testing though, having just come from a Captivate I'm a little sensitive about my phones GPS capabilities
Sent from my SGH-I777 using Tapatalk
Click to expand...
Click to collapse
Will do. Should arrive any day.
Abra_Cadabra said:
Word of warning - I bought the case mate case with the metal back (http://www.case-mate.com/Samsung-Ga...-S-II-Barely-There-Brushed-Aluminum-Cases.asp).
Very nice case but killed GPS.
Without the case immediate fix.. with the case no fix at all. Had to get rid of.
I have a feeling all metal cases will have the same issue.
Click to expand...
Click to collapse
With the european version and the Taurus GPS works perfect! Really a great bumper, I hope it fits for you guys!
We're talking about a .7mm difference in height as the biggest difference in size between the two devices. I know it's aluminum, but it's SO close... unless it's landing-on-the-moon precise, I feel like it's got to fit!
I hope so anyway, every other case I've seen is gigantic and really defeats the purpose of having such a slim phone.
No GPS Issues (still works indoors)
Gives a great sturdy feeling.
DOES NOT provide any clearance to the rear camera lens (stock battery).
Very very close to the same offset on the backside.
Gave me my missing Lanyard attachment point via a loop through the speaker hole.
I'm loving it in Gunmetal
iqak said:
No GPS Issues (still works indoors)
Gives a great sturdy feeling.
DOES NOT provide any clearance to the rear camera lens (stock battery).
Very very close to the same offset on the backside.
Click to expand...
Click to collapse
That sounds great! I'm not sure what you mean about your last two comments re:camera clearance though... Can you post some pictures? I'm dying to order it, but the skeptic in me HAS to see pictures first!
Yea what do you mean with no camera clearance?. I have the generic Case mate one at the moment but would love a metallic one as that would go epic great together with my keyport.
But do you have any links to where it can be bought?
MeX_DK said:
But do you have any links to where it can be bought?
Click to expand...
Click to collapse
http://www.toughracing.com/
Ugh it provides no protection to the camera like the CaseMate one does. The case mate cover at least lifts the rest of the phone high enough so that the camera bit is not extending out beyond the backside and thus you avoid scratches to the lens etc.
MeX_DK said:
Ugh it provides no protection to the camera like the CaseMate one does. The case mate cover at least lifts the rest of the phone high enough so that the camera bit is not extending out beyond the backside and thus you avoid scratches to the lens etc.
Click to expand...
Click to collapse
Ahhh... Gotcha. Assuming that's the worst of it, I'm ordering one as soon as I see a picture of this case on an AT&T SGS2.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
I mean, I wouldn't mind a full metal one. IF it actually covered the back as well and lifted the general phone off the deck enough for the camera "housing" to not scratch against the table etc.
Harbinger1080 said:
We're talking about a .7mm difference in height as the biggest difference in size between the two devices. I know it's aluminum, but it's SO close... unless it's landing-on-the-moon precise, I feel like it's got to fit!
I hope so anyway, every other case I've seen is gigantic and really defeats the purpose of having such a slim phone.
Click to expand...
Click to collapse
Agreed. What makes me even more optimistic is the fact that if you check out some installation videos on Youtube, when applying the case, you place a rubberized seal between the bumper and the phone itself. This protects the phone from the bumper itself, and also provides a more snug fit, as opposed to a hard-on-hard surface.
I expect the case later today (10/14/11). Promise to report how it goes as soon as I get my hands on it, and will include UHQ photos of the install.
Perhaps this thread should be moved to 'AT&T Samsung Galaxy S II Accessories'?
My bad.
Post your mini review with pictures in the ATT thread, with a link here. No harm, no foul!
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Bought my case from here: http://www.ebay.ca/itm/330710065235...X:IT&_trksid=p3984.m1497.l2649#ht_3991wt_1185
They have different colors. I got the black one. Not bad for $12 with free shipping.
Took 14 days to arrive in Canada. Item actually shipped from Singapore and not Hong Kong (as it says on the ebay page)
Power button and volume rocker are easy to press. Although you wont feel any feedback from pressing these buttons. Typical of any TPU case.
As you can see, the TPU is textured for improved grip.
Rock Logo above the speaker cut out.
Protects the rear camera! No more worrying when laying your phone on any surface.
Front view with the phone. The TPU case extends all the way to the edge of the screen. You can put the phone face down on a table and it wouldnt touch the screen.
Rear view with the phone. You can still see the HTC logo and Beats Audio logo.
A closer look at the camera protection.
Cut outs are perfect for micro USB port, 3.5mm headphone jack and microphone. However, no cut out for the 5pin at the back.
Took the pic on a wrong angle. Cut out is actually perfect.
It comes with a free screen protector. Its not a perfect fit. The sides wont stick since the screen is curved.
Thanks for checking it out!
Been looking at these too. May treat myself. Thanks for the info
Sent from my HTC One X using Tapatalk 2
Very good Review and good pics!
Sent from my HTC One X using XDA Premium HD app
Just ordered a white one, for £6.55 , should have plenty of grip with all those nobbles.
Thanks.
EDIT : No need for a cut out for the 5 pin connector, it`s just about certain you could not use you phone in the dock with the case on anyway.
John.
http://www.ebay.co.uk/itm/Rock-TPU-..._MobilePhonesCasesPouches&hash=item35bb386075
Thanks for the review and all the pics, looks like a nice case for the price especially with the much needed protection for the camera lens.
Nice review, just what I was after. Cheers.
Ordered same few days ago, still waiting.
Good pictures mate and I agree its a fantastic case.
It is a touch harder then what I expected.
I purchased the clear, and on white from front and sides it hardly looks like a case, more like a halo or clear glow.
Took 9 days to arrive.
Thanks for the kind comments. I have another tpu case coming. I'll update my original post when it arrives.
Sent from my HTC One X using Tapatalk 2
maxseemo said:
Good pictures mate and I agree its a fantastic case.
It is a touch harder then what I expected.
I purchased the clear, and on white from front and sides it hardly looks like a case, more like a halo or clear glow.
Took 9 days to arrive.
Click to expand...
Click to collapse
You got the white one? I am planning to buy that - can you post some pics and the link where you got from.
Are you able to comment on the grippiness/rubberyness of this? I don't like rubbery feel to cases, I kind of want a hard case... but I also want something with better protection
Nice! Thanks !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Colours came out a bit funky using my dhd but the clear case doesn't mess too much with the look of the X.
From: ebaay
maxseemo said:
Colours came out a bit funky using my dhd but the clear case doesn't mess too much with the look of the X.
Click to expand...
Click to collapse
They don't advertise it as clear, but as "white" on their eBay page, I assume white = clear?
Love the white/clear Rock case. Might order another one for myself.
mattman83 said:
Are you able to comment on the grippiness/rubberyness of this? I don't like rubbery feel to cases, I kind of want a hard case... but I also want something with better protection
Click to expand...
Click to collapse
Grip is good, definitely gives a rubbery feel. Same as any tpu case I guess.
You wont get any better protection. Hard cases do not cover the top and bottom parts of the phone. Some even dont have lens protection.
Texan1 said:
They don't advertise it as clear, but as "white" on their eBay page, I assume white = clear?
Click to expand...
Click to collapse
Correct. White = Clear
i just bought one too. hope i won't take so long to arrive in germany
took the black one for my grey phone
Just ordered a white one. Any case that doesn't protect the face isn't worth buying imo.
Thanks for the review
I just ordered the black for my white One X, since it's clear it gives it a nice smoky look.
Ooops thanked you by accident with too many forum threads open, lol!
Hope you post photos now
People with the case, wanted to ask if you think the top front edge could be lower, by the camera?
In the photo you can see that the bottom edge curves round the front of the body further than the top.
Does this affect the protection at all? Basically I have a similar cheaper case but the front is a bit too high and does not protect the edge very well. Thanks
This is a review of Yoobao Note 2 TPU Case Stand: http://www.kevikev.com/Yoobao-Samsung-Galaxy-Note-II-2-N7100-360-TPU-Case-Stand-YB360TPUNOTE2.htm
Along with Yoobao Thunder external battery, I also received this very unique Yoobao case. I think it will be hard to amuse anybody with yet another N2 case since we got every variation covered already. This one is different from everything I have seen. When looking into a slim case category, usually the choice is either TPU case or a slim plastic shell/case. This one combines both into one by offering a hard plastic back fused with a TPU border/sides. The hard plastic back is made out of thick transparent material with a unique frosted matte finish. It also feels scratch resistant, I tried to scratch it with my nail - no marks at all. The TPU sides have a very nice grip around the phone with hardly any pulling at all. It also gives you a good grip to hold on to with N2 in your hand. Power and volume buttons are covered and very responsive and easy to push. All the openings are perfectly aligned. The TPU bumper wraps around the phone with an acceptable lip so there is no problem putting the phone down on it's screen. I had clearance even with my tempered glass screen protector.
And speaking of screen protector, Yoobao also included one with this case. I didn't install it, but it felt premium quality, not a typical flimsy stuff you get from ebay. It also comes with a very generous micro-fiber piece of cloth. Pretty much this is a very nice looking slim TPU/PC hybrid case that will give you a good protection for everyday basic use and also will showcase your Note 2 very nicely since the back is semi-transparent. If that's not enough, Yoobao kicked it up another notch by including a very unique rotating kickstand. The kickstand itself is flush mounted with a back of the case, so placing the case down will not make it wobble. Also, the mechanism looks more durable than average plastic kickstands. What makes it especially unique is the way how it rotates 360 degrees by allowing to place your N2 in both portrait and landscape modes. Also, once extended you can hold on to this kickstand like a trigger for an easier grip of the phone, for example when you are in bed reading or watching the movie. I do have to mention that I had no issue opening kickstand on black case, while the aqua was a little hard to open which actually be fixed by filing the sides of the stand. I think its a minor thing.
I actually like this case very much because it offers something very unique to make your phone stand out from other slim TPU or plastic cases. With addition of an integrated kickstand and a bonus screen protector for under $14 I think its a great value. It comes in two colors, black and aqua. I didn't even expect that I will like aqua color thinking its girly, but it actually looks really cool with white Note 2. Don't forget, you can still use kk001 coupon to get 10% of with $50 purchase from www.kevikev.com, and I think if you order 2 items from that store you get a free shipping. Just contact them for more details, or I will find out and update it later. Just keep in mind www.kevikev.com is the only US licensed/authorized Yoobao dealer who also honors their warranty.
Here are the pictures:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kinda reminds me of the OEM protective cover +... only better because it has a kickstand!
Sent From My Ginormous Note 2
planetbeen said:
Kinda reminds me of the OEM protective cover +... only better because it has a kickstand!
Sent From My Ginormous Note 2
Click to expand...
Click to collapse
Uh, good point! In addition to kickstand, you also get screen protector and less than half of cover+ price.
It isn't really holding it up in portrait is it? I mean unless you're standing right over top of it.
It's a novel idea, but they didn't really pull it off did they?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
LittleRedDot said:
It isn't really holding it up in portrait is it? I mean unless you're standing right over top of it.
It's a novel idea, but they didn't really pull it off did they?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
True, this is not a cradle to put the phone in a complete upright position. In the picture I took, you have a little more room for adjustment to bring the angle up, but not by too much. To be honest, I can't even of why would anybody need to use their phone in portrait mode. Most of the people need it in landscape to watch the movie anyway.
vectron said:
True, this is not a cradle to put the phone in a complete upright position. In the picture I took, you have a little more room for adjustment to bring the angle up, but not by too much. To be honest, I can't even of why would anybody need to use their phone in portrait mode. Most of the people need it in landscape to watch the movie anyway.
Click to expand...
Click to collapse
Portrait would work better for reading text, such as a recipe you are cooking from, or an ereader program with automated page turns. A stand is nice when you are doing something that makes your hands dirty.
I use portrait a lot for this forum and for my yahoo messenger app.
On the messenger app the stupid on screen keyboard covers the whole conversation if it's in landscape.
I'm usually using it like this if I'm in the bathroom getting ready to go somewhere or in the kitchen making dinner or something like that.
Sent From My Ginormous Note 2
vectron said:
True, this is not a cradle to put the phone in a complete upright position. In the picture I took, you have a little more room for adjustment to bring the angle up, but not by too much. To be honest, I can't even of why would anybody need to use their phone in portrait mode. Most of the people need it in landscape to watch the movie anyway.
Click to expand...
Click to collapse
So can you take another pic with it in its full upright position and add it to the op? I would consider this case if it did both positions well.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
One question, does the back of the kickstand come directly in contact with the battery cover?
I will take more pictures and double check if there is a contact with a battery door once I get home!
Looks good, but portrait is a joke. I only have one case that does portrait well in a mybat case. Problem with that is makes an already big phone even bigger. Almost as big as the Otterbox Defender. Works well though.
Looking for a slim line case that does both portrait and landscape well. This would do it, if portrait was better.
Appreciate your due diligence though in all these accessories and reviews. Well done yet again!
Fancy pants Note ||
To confirm, the kickstand doesn't touch the battery cover. And unfortunately 45deg angle is the best I can do with portrait kickstand position. If the kickstand would have been longer and the spinning disc closer to the middle of the case, it would have been a different story. So if you need to have it more upright - that kickstand wouldn't work. The more I look at it, the more it feels like Samsung Cover+ case with landscape kickstand, and for half the price.
Do you know where we can get these in the UK? Amazon only has one without the kickstand.
Sent from my GT-N7100 using xda premium
update: WARNING: Will Stain WHITE HTC ONE
$4 shipped. slim clean matte tpu.
http://www.ebay.com/itm/Black-Soft-Silicone-Gel-TPU-Jelly-Case-Cover-Skin-Screen-Guard-For-HTC-One-M7-/360666688825?pt=US_Cell_Phone_PDA_Cases&hash=item53f968ed39
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pictures from ebay - black on black
Looks very nice, got myself one. Almost made me want to have the black One lol
wow. 4 dollars? nothing to lose. ill post about it when i receive it.
BTW transit time from china to U.S. was an impressive 7 business days. It actually looks better in person then the picture I posted.
woah nice find! was looking for a change of case and looks like with this case, the power button is gonna be a lot easier to press than my current Belkin Sheer Grip Matte due to the fact that the plastic at the back of the case is slightly lowered where the power button is. Just ordered one for myself and one for a mate. Thanks for posting.
Thats the ONE for the ONE. I also have it and love it. Very sleek, keeps the phone looking the way it was supposed to.
here's a better picture.
How big is the front lip
Thanks for taking the time to post this I really like it
Sent from my HTC One using xda premium
Mr Hick said:
How big is the front lip
Click to expand...
Click to collapse
Barely big enough to cover the glass screen protector. I think if it is any less then it would be without one. This doesn't add any bulge and maintains the sleek look of the phone
FYI I have a red silicone cover without a power button cut out, and the IR transmitter works
Sent from my HTC One using xda premium
sbihue said:
Barely big enough to cover the glass screen protector. I think if it is any less then it would be without one. This doesn't add any bulge and maintains the sleek look of the phone
Click to expand...
Click to collapse
Correct, trim is good enough for its purpose, protection when laying flat on face. A thick trim will not protect the screen from any drop to a rock or any edge, and create a false sense of protection.
The case may feel a little loose when you first get it. I recommend heat it up with blow dryer then quickly dump it in cold water to tighten it a bit.
Does it affect the camera flash? The cutout looks close to the flash. I had a Kays case that had a similar opening and the flash reflected glare into the photos.
I just bought a similar case from Amazon which I prefer because it's transparent. However, your pics gave me an idea on how to mod the case because I don't like how there is not a cutout for the volume rocker. I started to make this mod today actually, but one of your pics shows me that I should cut further towards the back of the case which will give my fingers proper room to hit the volume rocker instead of having to use my finger nails :good:
Drvylyne said:
I just bought a similar case from Amazon which I prefer because it's transparent. However, your pics gave me an idea on how to mod the case because I don't like how there is not a cutout for the volume rocker. I started to make this mod today actually, but one of your pics shows me that I should cut further towards the back of the case which will give my fingers proper room to hit the volume rocker instead of having to use my finger nails :good:
Click to expand...
Click to collapse
I had a grey transparent case, it was perfect except there were no cut outs. Cutting it wasn't clean so I trashed it.
I'mDan2 said:
Does it affect the camera flash? The cutout looks close to the flash. I had a Kays case that had a similar opening and the flash reflected glare into the photos.
Click to expand...
Click to collapse
No issues with flash
Sent from my HTCONE using xda app-developers app
are other colors available as well ? I'm quite interested in this case
Ordered one for my black One... Is this an easy on/easy off case or is it difficult to remove? I only ask because I ruined my Poetic case trying to take it off because it was so tough to remove.
Seller doesnot ship to India nor UK . Can someone buy it and post it to me ? I will PayPal the money
Sent from my HTC One using xda premium
dx.com/p/protective-soft-silicone-back-case-for-htc-one-m7-black-224757
This looks similar but cheaper
does any one try this?
I am considering this because the one from ebay won't ship to my country
Is this the same case, a few different colors.
EDIT : sorry excludes Germany
http://www.ebay.co.uk/itm/Soft-Sili...sPouches&var=550258949928&hash=item3a82a573fa
John.
riotman said:
are other colors available as well ? I'm quite interested in this case
Click to expand...
Click to collapse
Two thumbs up for this case thus far.
It is very easy to slide the phone into the case, and it requires just a little extra effort to remove it. The case is a tight fit all around. It feels sturdy and makes the phone easier to hold/grip with its more angular shape. The power button requires just a soft press, while the volume rocker requires twice the effort. The camera lens is protected and embedded ~1.5 mm within the casing.
Not sure if I am forgetting any thing else, but some pictures!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Comparing the thickness between the phone and the case (a little blurry, but you get the picture... no pun intended).
EDIT: Clearer pictures below!
I too got the case today with my Nexus =). I really liked the color and felt it was unique and a nice change from the black and white that every manufacturer seems to be pushing these days. I will agree on the buttons but nothing major. Seems like the phone will be safe should the horrific day arrive when the phone is dropped.
Cheers mates
Looks pretty cool
thanks
I bought the slim armor in black. I really appreciate the photos that you posted if you could post more close ups of the front and back I'm kind of curious about how thick the bezel is on the front mine should be here this week. Kinda wish I got champagne after seeing yours..
I love this quality and type of case. My friend has the same spigen for the S4 and I love the silicon/plastic style case on it. Good to see they made one for the N5.
Thanks for the pictures - mine is being shipped to me we speak . From what you've described/shown, everything looks great! Do you have a screen protector on their by chance? Wanted to know if the sides of the case make it lift off on the corners...
nice. the gold looks sharp, i was spit between that and the neo hybrid....ended up going for the neo-hybrid in gold
the white speaker dot actually looks pretty cool with a case on
FYI I noted in the other thread this case is significantly easier to put on and take off if you leave the two pieces together while doing it.
Sent from my Nexus One using XDA Premium 4 mobile app
dinc4g said:
I bought the slim armor in black. I really appreciate the photos that you posted if you could post more close ups of the front and back I'm kind of curious about how thick the bezel is on the front mine should be here this week. Kinda wish I got champagne after seeing yours..
Click to expand...
Click to collapse
Hey, no problem. I believe you're asking to see a bird's view of the bezel with the case.
Also took some close-ups of the four sides for anyone who is curious:
Headphone port.
Charger port and speakers.
Right-side with power button.
Left-side with volume rocker.
Ordered the Black, looks like a great case. I like Spigen products.
RF
eddies92 said:
I too got the case today with my Nexus =). I really liked the color and felt it was unique and a nice change from the black and white that every manufacturer seems to be pushing these days. I will agree on the buttons but nothing major. Seems like the phone will be safe should the horrific day arrive when the phone is dropped.
Cheers mates
Click to expand...
Click to collapse
I agree. The champagne color stands out and has a classy feel to it. Although I have to admit, I also like the white back of the N5. With a case or not, it is a good looking phone!
elite_gamer04 said:
Thanks for the pictures - mine is being shipped to me we speak . From what you've described/shown, everything looks great! Do you have a screen protector on their by chance? Wanted to know if the sides of the case make it lift off on the corners...
Click to expand...
Click to collapse
No screen protector yet. Still waiting for that piece in the mail ...
chillaxnphilx said:
FYI I noted in the other thread this case is significantly easier to put on and take off if you leave the two pieces together while doing it.
Sent from my Nexus One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Solid point! I didn't remove the two pieces at all, which goes to show how easy the installation and removal are.
Nice looking case!
Just a few questions...
What is the back made out of?
Does it collect dust or finger prints?
Does it slide in and out of your pockets easily?
How is the grip?
Sent from my SGH-T889 using Tapatalk
Thanks for the pictures. I'm glad they didn't go with the glossy back this time around.
I was wondering once you put this case on is it also easy removeble.
Wen i'm driving in a car i put de N5 in a car holder and with de case on i think it's to thick
for that holder.I just slide the phone in the holder.Not much space is there be left on the sides.
Does it work with wireless charger or too thick?
Sent from my Nexus 7 using xda app-developers app
A gorgeous case. I don't know whether to get the white or the gold colour way, both are really appealing.
Did you have any issues with the power button as mentioned in some of the reviews on Amazon?
From past experience, does anyone know what of a case thats for people who drop their phones a lot? One thats out now or coming in the future?
Car mount
mennings said:
I was wondering once you put this case on is it also easy removeble.
Wen i'm driving in a car i put de N5 in a car holder and with de case on i think it's to thick
for that holder.
Click to expand...
Click to collapse
I'm curious on this point too. My champagne case should be delivered soon, but as I've just splashed out on (40% off) TomTom, I'd like to be able to mount the N5 on my dash. All my phones in the past have been naked, but since I've paid for this one myself I've got the Slim Armor for "protection". Maybe it's too early for the N5, but looking at other models are there ever solutions for mounting encased phones? Will the case stand up to occasional removal in order to mount on a car dash?
Come to that, has anyone yet seen a dash mount for the N5? Preferably vent-mounted; my last screen mount was broken by an over-eager MOT tester.
Thanks for any response from a forum lurker!
Mike