Related
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
HRodMusic said:
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
Click to expand...
Click to collapse
God, hit the thanks button on accident again! :/
For the screen protector I would get ReaLook.
For the case, I would just the hard case from T-Mobile.
im prob gonna pickup a realook screen protector
HRodMusic said:
im prob gonna pickup a realook screen protector
Click to expand...
Click to collapse
get realook over zagg, you wont be dissapointed. as for case, imo i like the body glove and tpu. i switch off here and there but i use the body glove mostly bcuz the tpu makes it a pain sometimes to hit the hard keys.
hey does the tpu stick to your bag? like rubber?
HRodMusic said:
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
Click to expand...
Click to collapse
I have a realook screen protector and it's very nice but I always have to clean it because it's a fingerprint magnet. I bought a Skinomi screen protector from Amazon because it only cost me $1.05. I haven't tried it yet and the reviews on Amazon are less than favorable for it. Here's the link so you should take a look.
http://www.amazon.com/Skinomi-TechS...sr_1_1?ie=UTF8&s=mobile&qid=1292424498&sr=8-1
Cases & screen Protector
I had purchased a case on amazon for $1 and it sucked i went to a T-Mobile store and got the gel case that they had and it is awesome i have dropped my phone a couple of times and it still works perfectly.
The screen protector i also got from tmobile and it was really good it comes in a 2 pack for like 10 - 15
I use the T-Mobile Black gel skin case and I used to have a ZAGG screen protector but after the whole gorilla glass revelation I have not used a screen protector and have not had any problems. I have heard and seen lots of good things about reallook
I have both the body glove case and the tough case by case mate. I like the case mate one as the body glove chrome front piece is very fragile and will break.
Sent from my SGH-T959 using Tapatalk
Case-Mate Tough Case.. I purchase many different cases and the Case-mate one doesn't stick and comes in two layers without making the phone too bulky. It makes the vibrant feel solid in the hand and you won't ever have to worry about dropping it.
It's a little bit pricey at $29.99 but its worth it. It also comes with a screen protector but I personally haven't tried it out and I prefer the screen to be naked. Yet to be scratched. There is a thread on XDA in regards to the Case-mate tough case including pictures.
After purchasing this case, I looked no further and I've been satisfied with this case for months.
zephiK said:
Case-Mate Tough Case.. I purchase many different cases and the Case-mate one doesn't stick and comes in two layers without making the phone too bulky. It makes the vibrant feel solid in the hand and you won't ever have to worry about dropping it.
It's a little bit pricey at $29.99 but its worth it. It also comes with a screen protector but I personally haven't tried it out and I prefer the screen to be naked. Yet to be scratched. There is a thread on XDA in regards to the Case-mate tough case including pictures.
After purchasing this case, I looked no further and I've been satisfied with this case for months.
Click to expand...
Click to collapse
i was thinking on getting that barely case =/ i kno for a fact im getting that realook screen protector!
I second the case mate tough case. Its awesome. Goes in and out of your pocket without sticking. Plus it gives it a.great feel. Also the realook is the best. Just make sure in a.dust free environment. I read on here that the bathroom after a shower is best. That's how I installed mine and it went great.
Powered by Axura
HRodMusic said:
i was thinking on getting that barely case =/ i kno for a fact im getting that realook screen protector!
Click to expand...
Click to collapse
The barely there case is nice. I have the silver. Don't let anyone tell you that the silver one degrades the signal, it does not. The black one has a better grip, though, it's textured where the silver one is slick.
here's the silver:
http://www.youtube.com/watch?v=OHLglrlRsrw
black:
http://www.youtube.com/watch?v=sT-SEbJfW54&feature=related
I also like the realook sp, I've tried at least 5 others and realook is the best in my opinion.
HRodMusic said:
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
Click to expand...
Click to collapse
As I'm sure you have come to the conclusion... reallook is the way to go when it comes to screen protectors, no questions asked. just do it.
I was stopped at the mall I live near by the people selling the invisibleSHIELDs. They called basically said i was lying that I even had a SP on my phone, because "no screen protector looks that good" and told me that i cant take a key to it... so i did and nothing happened.
Then they lost sales when the other people they stopped asked me what company mine was and found out it was half the price, ha.
and for the case i have the jell tmobile one... i got it as a "meantime" case, until i found one i liked.... and i have fell in love with it.
I still didn't decided about the case, not even the screen protector, and I find it more difficult because most of you have the black phone and I can't tell how the case would look like on a white one. Should I go only for white? Was going for a ultra protective case but on second thought a solution would be a normal case not so thin like barely there and not so thick, medium for indoor use and for going out the flip style because it protects the screen better. But then again, you have more combinations available because black goes well with any other colour. Please gs2 white users post some pics and recommendations.
Ashan85 said:
I still didn't decided about the case, not even the screen protector, and I find it more difficult because most of you have the black phone and I can't tell how the case would look like on a white one. Should I go only for white? Was going for a ultra protective case but on second thought a solution would be a normal case not so thin like barely there and not so thick, medium for indoor use and for going out the flip style because it protects the screen better. But then again, you have more combinations available because black goes well with any other colour. Please gs2 white users post some pics and recommendations.
Click to expand...
Click to collapse
I bought this case for my GS2. It fits very nice, but the downside is that id adds a bit of thickness everywhere.. but i like it that way because the phone is much more comfortable to handle. Also I've ordered this screen protector from ebay. A friend of mine uses it on his iPhone 4 and it looks very nice (the protector, not the phone )
Thanks, that case looks OK, is a noname from hk? Gel or tpu? It offers some protection, link please. The screen protector is really cheap, so you didn't received it yet?
Ashan85 said:
Thanks, that case looks OK, is a noname from hk? Gel or tpu? It offers some protection, link please. The screen protector is really cheap, so you didn't received it yet?
Click to expand...
Click to collapse
The case is from gel, but it's some kind of a hard gel and it offers a very good protection and gives you a good grip when holding the phone. It is a noname. I bought from a local store here in Bulgaria, so I'm sure that you'll be able to find similar in your country. The screen protectors haven't arrived yet because the shipping time to Bulgaria from anywhere is between 15-25 business days, and I ordered it a week ago.
iconata said:
I bought this case for my GS2. It fits very nice, but the downside is that id adds a bit of thickness everywhere.. but i like it that way because the phone is much more comfortable to handle. Also I've ordered this screen protector from ebay. A friend of mine uses it on his iPhone 4 and it looks very nice (the protector, not the phone )
Click to expand...
Click to collapse
can you give me the link for this case?
the case is good looking~
I have a black sgs2, BUT I can tell you one thing:
I really reccomend you buy a TPU case as it's very good (at least the one that I got) and protects the phone great.
I've bought this Case Mate 3 months ago. It was very nice, totally clear. It protects the chrome edge all around. You could put the phone screen face down on a flat surface. The screen would not been harmed in any way.
But after a few weeks the case was getting discolored. It's blue on the corners because of my jeans pocket. And the whole case is a little yellowish.
Sent from my GT-I9100 using Tapatalk 2
I'm using a black rubber case from Momax on a white GS2. I think the contrast adds a nice touch. The fit is slightly tight because I am using the official 2000 mah Samsung battery, but it looks very natural. Will post pics when I get home tonight!
what case did you end up with?
I had this case on the HTC 8X in grey and it was easily one of the best cases I've ever had on any phone. The thinness, feel and texture was great.
As a first case for the HTC One I decided to buy this one but in black instead of grey to match with the light aluminum. It's a great case, it feels great, adds grip and the matte color is awesome. The grip and feeling on the back is superb. However, for that matte look, the black case texture/material is a little different than the one I had on the grey for the 8X.
It attracts finger prints and sweat or grease of your fingers. If it wasn't for this, this case would be perfect, at least for me.
If you don't live on a humid place or don't have have problems with finger prints, get this case by all means. Where I live it's almost 80%-95% humid all year so even if I don't have sweaty hands, it's inevitable that they get moist.
To sum up, it's a wonderful case, despite the problem with the smudges on the back. For that detail alone, it won't be for anyone as it would need to be cleaned two or three times a day to avoid the greasy/moist look on the back.
I do plan to get one in grey as the one I had on the 8X had an even better texture and feel and it didn't attract stains or finger prints at all. AT ALL. It was also a much of a darker grey that it showed on the pictures and I liked it even more when I got it.
For scratch protection, minimum bulk and great look and feel, this is a very good case.
View attachment 2097786 View attachment 2097787 View attachment 2097788 View attachment 2097789 View attachment 2097790
PS: I have a MEIFENG (Bear Motion) in grey and a black Nillkin case on the way. I will post about them when they get here.
WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!
My problem with the case is the open top and bottom.
djq said:
WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!
Click to expand...
Click to collapse
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
OGhoul said:
My problem with the case is the open top and bottom.
Click to expand...
Click to collapse
I like the open top and bottom because it adds to the lightweight of the case and allows the natural aluminum color to be displayed prominently. The accessibility of the USB port and the power button is great because there is nothing around them.
This kind of case is only for scratch protection but that's the kind I'm always looking for.
I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!
ajua said:
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
Click to expand...
Click to collapse
thats why i love this forum i learn something i may have never found out about
joudbren said:
I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!
Click to expand...
Click to collapse
I'm very careful with my phones and cases. I hope yours was only a detail you didn't see when you bought it.
How are you doing with the finger smudges on the back of this case? It's better than I initially thought but I still have to clean it often.
djq said:
thats why i love this forum i learn something i may have never found out about
Click to expand...
Click to collapse
Everyone is learning something on this forum all the time
Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.
Tuppidsay said:
Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.
Click to expand...
Click to collapse
You can contact Incipio about this. The case comes with a one year warranty and I'm sure they'd be willing to cover that and replace it.:good:
I've bought a few cases for the One and this is definitely my favorite, all the rest I enjoyed but missed the slim line feel. The incipio is the best of both worlds.
Sent from my HTC_PN071 using Tapatalk 4 Beta
Just ordered one of these.
I'm seeing a lot of reviews on Amazon with the lighter colored ones hazing up flash pictures. Seems to be a common thing with close cutouts for the LED. Black cases are going to be the best to avoid flash interference.
Got mine and yes it's definitely one of the most minmalist cases I've ever used. Be careful with this one as it doesn't afford much in the way of drop protection but you already knew that...
The lip over the screen is a bit shorter than I'd like, still need to be wary of setting it down screen down just in case.
However for those that prefer the naked feel but don't want to be paranoid of scratching the back when sitting on a table, you will like this!
Be wary the plastic cutout piece along the top where the volume rockers and usb charging port are quite thin and can break if stressed too hard when putting the case on and especially taking it off, just take you time and be gentle.
The black finish does show finger grease but is easily cleaned. The incipio dual is the same way. At least it doesn't scratch super easy like some of the smooth and glossy backs.
No case is perfect, that's why I have a drawer full of different cases!
I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...
I picked up a case for my HTC One at best buy. It looks 100% identical except for the logo on the back of the case. Very nice case.
icepixie said:
I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...
Click to expand...
Click to collapse
There is the Poetic Palette and Nillkin Hard Case/Shell. I can't say about the front lip for the screen as I don't own them but you can search for pictures and see if it is more prominent than the lip on the feather.
Looks nice and very slim!! :laugh:
Where can I find power bank wireless charger?
Where can I find power bank wireless charger?
I want to get one.How Can i get it
I'm a new Axon 7 owner and am currently searching for a case to use on this phone. The stock transparent case that comes with the phone is great but due to the fact it's a glossy plastic, it attracts a lot of grease from my fingers and feels dirty after a while. I also dislike it because the sweat from my hands will form into condensation on the back of the case. I also have a problem where the jack on my headphones (Audio Technica ATH-M50) is too large to fit in the hole provided.
I decided to purchase the Spigen 'Rugged Armor' case from Amazon after reading a lot of positive comments about it, but I have been left disappointed and debating whether to return it due to the sheer size and thickness that makes handling the phone (Which is already large enough!) incredibly difficult with small hands. The case does not add much friction despite the material used having a rubber-like appearance, and I actually feel more likely to drop the phone as a result of trying to fumble with the added size. As well as this, the cut-out for the headphone jack is still too small even though it's larger than the wider than the one seen on the stock case. I also find it a lot more difficult to access the fingerprint scanner due to the thickness of the case surrounding it. Another problem is that the case is quite difficult to put onto the phone and a lot harder to remove, to the point where it feels like i'm actually going to damage the phone by attempting to do this!
For my previous phone, a Lenovo ZUK Z2, I had a fantastic Nillkin 'Frosted Shield' shell case that was made from a soft-touch rubber-like plastic. It was very slim at about 2mm in thickness at most, and although it didn't offer much in the way of drop-protection, it did have a nice textured back and that increased the grip tremendously. So, despite the case not being able to protect the phone quite as much from being dropped, it didn't matter because the chances of dropping the phone in the first place were a lot less likely. I wondered whether there was something similar for the Axon 7, but instead in a TPU-style with the sealed corners, and the same thickness as the stock case that's included with the phone? Any recommendations would be most appreciated.
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
That looks nice, it's kinda like the old Sandstone Black finish on the OnePlus One. There was one similar to this on Amazon UK but I don't think it had the same texture to it. My only compliant with that one is that it isn't a TPU case which completely covers the corners, but on the other hand the sand texture probably adds a lot of grip to reduce the risk of it being dropped.
I'm currently looking into getting the J&D case from their official website. It's in TPU-form which covers the entire phone (Except from the power/volume buttons!) and has the textured soft-touch back I wanted. The only problem with this one is that the glossy plastic edges look a bit tacky in the pictures, but hopefully it's not as bad in person as it looks on the website. I have a discount code which knocks a subtle 15% off the price listed, so it might be worth a shot.
Looking into this now myself. The stock clear case will go yellow as they all do. Getting cheap see through black case as a temporary till I find a good one. I find the clear one a tad loose at the side.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
Hi there,
Does this case provide good grip?
Thanks for confirming!
joaste said:
Hi there,
Does this case provide good grip?
Thanks for confirming!
Click to expand...
Click to collapse
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Sui77 said:
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Click to expand...
Click to collapse
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
joaste said:
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
Click to expand...
Click to collapse
This one is a different story.
It's the best pick you can get
Sui77 said:
This one is a different story.
It's the best pick you can get
Click to expand...
Click to collapse
Thanks. Just ordered it.
joaste said:
Thanks. Just ordered it.
Click to expand...
Click to collapse
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
P650SE said:
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
Click to expand...
Click to collapse
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
joaste said:
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
Click to expand...
Click to collapse
Thanks for posting those pictures! That's a shame to hear the grip wasn't as good as expected. I wanted something which provided more grip than the stock case, so maybe this isn't the right one for me. I also live in the United Kingdom and having the case shipped from Germany would make it more expensive in postage costs. It does look like a nice case but I am worried it might not offer much protection if the phone is dropped. I think the J&D case would perhaps be better because it has a soft-touch back and conceals all the corners properly.
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
christoophat said:
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
Click to expand...
Click to collapse
Thanks for sharing your thoughts and opinions regarding the cases available for the Axon 7. It's interesting to hear how you found the Spigen case not to be bulky, because I found the opposite and returned it for that exact reason. I eventually purchased one of the cheap, plastic shell cases from AliExpress similar to the that in the pictures Joaste posted above.
My overall opinion on this case has been positive but it has worn on the edges and there are cracks down all four corners. As you mentioned, a shell case does not offer much drop protection but it's definitely better than not having a case at all and it does improve the grip quite notably. However, I wish it had a textured or 'Sandstone' back to help avoid grease buildup.
I am now looking for another case, but options in the UK are limited since the Axon 7 is not officially sold here.
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
emepher said:
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
Click to expand...
Click to collapse
I decided to order one of these in black to try out. Have been quite happy with my Spigen, but after installing this Proworx case yesterday, I think I am falling in love. Seems to offer enough protection, fits & looks nice, AND I kind of like how the buttons are a bit harder to push in, which actually prevents me from squeezing open the screen every time I try to pick it up. :good:
RobboW said:
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
Click to expand...
Click to collapse
Quoting myself here.
Today I fitted the full coverage protector to my Axon 7 and it fits into the Poetic Revolution case nicely! Glad I stripped out the dry protectors in the Poetic cases. I've also now fitted a plastic protector over the glass one as a quick and easy tear off to sacrifice for wear and tear but the glass one makes the front of the phone flat. Even with two stacked protectors, touch works perfectly.
The picture is slightly misleading as the black section also covers the capacitive buttons so there's no indicator of position, but not being backlit anyway, it makes little difference.
Here's a quicky bunch of pics. I have a soft TPU smoky case, black Poetic Revolution and a blue/grey Poetic Revolution which can be mix and matched. Got a couple of little bubbles under the plastic protector and will fix that later, or just remove it. Looks good with just the full coverage glass one.
If anyone is looking for a slim case I just picked up a Bear Motion Sand from eBay. Best case I've had so far for my A7 and I've tried quite a few. Feels like my OPO did.
https://www.amazon.com/dp/B01J9Y5CQ...d_r=3683683e-ab8d-11e8-96dd-777fa7fb2507&th=1
Been using this one for over 6 months now with out any issues , not as bulky as it looks and the stand is useful . I also have a full body clear skin from clear-coat that fits superbly, clear-coat has various outlets through the UK and installs as you wait , is a bit pricey at £30 for the full skin .
I work in the building trade so need it well protected .
Only fully body white case on the market is the Rhinoshield solidsuit. Everything else white are minimalist hard shell cases.
Took my old Spigen liquid clear tpu case and spray painted it white. Turned out way better than I thought.
https://imgur.com/a/M5jlxLx
Momotani-Hitoshi said:
Only fully body white case on the market is the Rhinoshield solidsuit. Everything else white are minimalist hard shell cases.
Took my old Spigen liquid clear tpu case and spray painted it white. Turned out way better than I thought.
https://imgur.com/a/M5jlxLx
Click to expand...
Click to collapse
I did a simple google search and came up with a bunch of them, not sure what you're talking about:
https://www.google.com/search?q=white+bodyshield+cases+pixel+3+xl
You can even get one with built in lights:
https://lumee.com/products/lumee-duo-google-pixel-3xl-case
sanjsrik said:
I did a simple google search and came up with a bunch of them, not sure what you're talking about:
https://www.google.com/search?q=white+bodyshield+cases+pixel+3+xl
You can even get one with built in lights:
https://lumee.com/products/lumee-duo-google-pixel-3xl-case
Click to expand...
Click to collapse
https://lumee.com/products/lumee-duo-google-pixel-3xl-case
Not exactly white, more like marble, and really $70 USD?
https://www.google.com/search?q=white+bodyshield+cases+pixel+3+xl
first product search result link is not white. It is transparent case with white flower artwork
2nd result hit Not really white. They are black case with printed decals slapped on the back
skim through more search hits, there are very few if not only 1-2. Wouldn't call that a "bunch". I've done the search many times, there are not many to out there on the market for pixel 3 xl. I've searched through amazon, ebay, aliexpress.
Challenge you to link me 5-10 on amazon.com that is full body pure white like the Rhinoshield solid suit . They are like the only one readily available. Peelcase has a kind of white one made of recycled stuff, but not really true white. Looks like recycled paper.
As a white-case connoisseur, my educated guess, after owning a billion of them for a billion phones, is I suspect they're not the favorite to produce for manufactures. Rubber and TPU, favorite materials for phone cases, stain VERY easily, and white ones turn irreversibly blue from blue jeans after only a couple days. They probably get a lot of customer complaints/returns. I pretty much gave up on finding nice solid-white cases. Either they stain RAPIDLY, or are made of very hard materials which are either bulky as hell or thin with terrible coverage (insufficient lip to set the phone face down without the screen touching the surface).
Otterbox is the one!!!
itiskonrad said:
As a white-case connoisseur, my educated guess, after owning a billion of them for a billion phones, is I suspect they're not the favorite to produce for manufactures. Rubber and TPU, favorite materials for phone cases, stain VERY easily, and white ones turn irreversibly blue from blue jeans after only a couple days. They probably get a lot of customer complaints/returns. I pretty much gave up on finding nice solid-white cases. Either they stain RAPIDLY, or are made of very hard materials which are either bulky as hell or thin with terrible coverage (insufficient lip to set the phone face down without the screen touching the surface).
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B07R28S854
Found one. I like it so far. We will see how easily it discolors or stain. https://imgur.com/a/AHRt4VC
Momotani-Hitoshi said:
https://www.amazon.com/gp/product/B07R28S854
Found one. I like it so far. We will see how easily it discolors or stain. https://imgur.com/a/AHRt4VC
Click to expand...
Click to collapse
Does if feel "sticky" like some silicon cases do? Is there a good lip preventing the screen from touching a surface?
TIA
mgp53 said:
Does if feel "sticky" like some silicon cases do? Is there a good lip preventing the screen from touching a surface?
TIA
Click to expand...
Click to collapse
It isn't sticky. Actually kind of slippery. Feels more like a soft touch plastic. Lip is minimal. Description says 1.2mm, but if you put a TGSP it might be flush.
Momotani-Hitoshi said:
It isn't sticky. Actually kind of slippery. Feels more like a soft touch plastic. Lip is minimal. Description says 1.2mm, but if you put a TGSP it might be flush.
Click to expand...
Click to collapse
Thanks, the wife really prefers a white case. Still looking too.
mgp53 said:
Thanks, the wife really prefers a white case. Still looking too.
Click to expand...
Click to collapse
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183531573765
It's not full body had a opening at the bottom but pretty dam close and good looking
razrlover said:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183531573765
It's not full body had a opening at the bottom but pretty dam close and good looking
Click to expand...
Click to collapse
those are half price on Ali, and the bottom opening has always been sharp for me. to be fair, i haven't used one since probably the og pixel, but I'd had may previously and they all were sharp against my pinky
These cases are amazing, and the protection is good, consider buying a better screen protector though, you get a free one, and you can tell its free, but its good until you can buy more expensive screen protector. Not white though, but i bet there will be.
https://www.mobilefun.co.uk/by-brand/zizo
There was a great Speck brand case few years ago, for like the iPhone 7 or something, it was White, with black little corners, looked super cool, but never saw it again for any other phone.
https://www.speckproducts.com/apple...olor=799865728&cgidmaster=sptyp-st850#start=5
I would like this for my Pixel 3 XL