I still didn't decided about the case, not even the screen protector, and I find it more difficult because most of you have the black phone and I can't tell how the case would look like on a white one. Should I go only for white? Was going for a ultra protective case but on second thought a solution would be a normal case not so thin like barely there and not so thick, medium for indoor use and for going out the flip style because it protects the screen better. But then again, you have more combinations available because black goes well with any other colour. Please gs2 white users post some pics and recommendations.
Ashan85 said:
I still didn't decided about the case, not even the screen protector, and I find it more difficult because most of you have the black phone and I can't tell how the case would look like on a white one. Should I go only for white? Was going for a ultra protective case but on second thought a solution would be a normal case not so thin like barely there and not so thick, medium for indoor use and for going out the flip style because it protects the screen better. But then again, you have more combinations available because black goes well with any other colour. Please gs2 white users post some pics and recommendations.
Click to expand...
Click to collapse
I bought this case for my GS2. It fits very nice, but the downside is that id adds a bit of thickness everywhere.. but i like it that way because the phone is much more comfortable to handle. Also I've ordered this screen protector from ebay. A friend of mine uses it on his iPhone 4 and it looks very nice (the protector, not the phone )
Thanks, that case looks OK, is a noname from hk? Gel or tpu? It offers some protection, link please. The screen protector is really cheap, so you didn't received it yet?
Ashan85 said:
Thanks, that case looks OK, is a noname from hk? Gel or tpu? It offers some protection, link please. The screen protector is really cheap, so you didn't received it yet?
Click to expand...
Click to collapse
The case is from gel, but it's some kind of a hard gel and it offers a very good protection and gives you a good grip when holding the phone. It is a noname. I bought from a local store here in Bulgaria, so I'm sure that you'll be able to find similar in your country. The screen protectors haven't arrived yet because the shipping time to Bulgaria from anywhere is between 15-25 business days, and I ordered it a week ago.
iconata said:
I bought this case for my GS2. It fits very nice, but the downside is that id adds a bit of thickness everywhere.. but i like it that way because the phone is much more comfortable to handle. Also I've ordered this screen protector from ebay. A friend of mine uses it on his iPhone 4 and it looks very nice (the protector, not the phone )
Click to expand...
Click to collapse
can you give me the link for this case?
the case is good looking~
I have a black sgs2, BUT I can tell you one thing:
I really reccomend you buy a TPU case as it's very good (at least the one that I got) and protects the phone great.
I've bought this Case Mate 3 months ago. It was very nice, totally clear. It protects the chrome edge all around. You could put the phone screen face down on a flat surface. The screen would not been harmed in any way.
But after a few weeks the case was getting discolored. It's blue on the corners because of my jeans pocket. And the whole case is a little yellowish.
Sent from my GT-I9100 using Tapatalk 2
I'm using a black rubber case from Momax on a white GS2. I think the contrast adds a nice touch. The fit is slightly tight because I am using the official 2000 mah Samsung battery, but it looks very natural. Will post pics when I get home tonight!
what case did you end up with?
Related
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
HRodMusic said:
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
Click to expand...
Click to collapse
God, hit the thanks button on accident again! :/
For the screen protector I would get ReaLook.
For the case, I would just the hard case from T-Mobile.
im prob gonna pickup a realook screen protector
HRodMusic said:
im prob gonna pickup a realook screen protector
Click to expand...
Click to collapse
get realook over zagg, you wont be dissapointed. as for case, imo i like the body glove and tpu. i switch off here and there but i use the body glove mostly bcuz the tpu makes it a pain sometimes to hit the hard keys.
hey does the tpu stick to your bag? like rubber?
HRodMusic said:
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
Click to expand...
Click to collapse
I have a realook screen protector and it's very nice but I always have to clean it because it's a fingerprint magnet. I bought a Skinomi screen protector from Amazon because it only cost me $1.05. I haven't tried it yet and the reviews on Amazon are less than favorable for it. Here's the link so you should take a look.
http://www.amazon.com/Skinomi-TechS...sr_1_1?ie=UTF8&s=mobile&qid=1292424498&sr=8-1
Cases & screen Protector
I had purchased a case on amazon for $1 and it sucked i went to a T-Mobile store and got the gel case that they had and it is awesome i have dropped my phone a couple of times and it still works perfectly.
The screen protector i also got from tmobile and it was really good it comes in a 2 pack for like 10 - 15
I use the T-Mobile Black gel skin case and I used to have a ZAGG screen protector but after the whole gorilla glass revelation I have not used a screen protector and have not had any problems. I have heard and seen lots of good things about reallook
I have both the body glove case and the tough case by case mate. I like the case mate one as the body glove chrome front piece is very fragile and will break.
Sent from my SGH-T959 using Tapatalk
Case-Mate Tough Case.. I purchase many different cases and the Case-mate one doesn't stick and comes in two layers without making the phone too bulky. It makes the vibrant feel solid in the hand and you won't ever have to worry about dropping it.
It's a little bit pricey at $29.99 but its worth it. It also comes with a screen protector but I personally haven't tried it out and I prefer the screen to be naked. Yet to be scratched. There is a thread on XDA in regards to the Case-mate tough case including pictures.
After purchasing this case, I looked no further and I've been satisfied with this case for months.
zephiK said:
Case-Mate Tough Case.. I purchase many different cases and the Case-mate one doesn't stick and comes in two layers without making the phone too bulky. It makes the vibrant feel solid in the hand and you won't ever have to worry about dropping it.
It's a little bit pricey at $29.99 but its worth it. It also comes with a screen protector but I personally haven't tried it out and I prefer the screen to be naked. Yet to be scratched. There is a thread on XDA in regards to the Case-mate tough case including pictures.
After purchasing this case, I looked no further and I've been satisfied with this case for months.
Click to expand...
Click to collapse
i was thinking on getting that barely case =/ i kno for a fact im getting that realook screen protector!
I second the case mate tough case. Its awesome. Goes in and out of your pocket without sticking. Plus it gives it a.great feel. Also the realook is the best. Just make sure in a.dust free environment. I read on here that the bathroom after a shower is best. That's how I installed mine and it went great.
Powered by Axura
HRodMusic said:
i was thinking on getting that barely case =/ i kno for a fact im getting that realook screen protector!
Click to expand...
Click to collapse
The barely there case is nice. I have the silver. Don't let anyone tell you that the silver one degrades the signal, it does not. The black one has a better grip, though, it's textured where the silver one is slick.
here's the silver:
http://www.youtube.com/watch?v=OHLglrlRsrw
black:
http://www.youtube.com/watch?v=sT-SEbJfW54&feature=related
I also like the realook sp, I've tried at least 5 others and realook is the best in my opinion.
HRodMusic said:
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
Click to expand...
Click to collapse
As I'm sure you have come to the conclusion... reallook is the way to go when it comes to screen protectors, no questions asked. just do it.
I was stopped at the mall I live near by the people selling the invisibleSHIELDs. They called basically said i was lying that I even had a SP on my phone, because "no screen protector looks that good" and told me that i cant take a key to it... so i did and nothing happened.
Then they lost sales when the other people they stopped asked me what company mine was and found out it was half the price, ha.
and for the case i have the jell tmobile one... i got it as a "meantime" case, until i found one i liked.... and i have fell in love with it.
Hi guys,
When I look at the forum, it's like advertisements of new products which doesn't tell me a lot. So can you please recommend me:
A case that:
doesn't require me to open some part to access the screen
protects the phone well against drops
is comfortable to hold and touch (my fingers won't get itchy etc.)
And a screen protector that:
protects without distorting the image quality and responsiveness of the screen
doesn't leave bubbles inside (I hate the bubbles) or fingerprints outside
is a little slippery so it won't be a hard job for me to move fingers on the screen
THANKS IN ADVANCE FELLAS!
There is a hybrid case, just search hybrid case sgs2 in amazon,
I'm perfectly happy with that.
Downsides:
- not so slim anymore
- more weight
But my phone feels safe
And I'd suggest the Mumbi-screen protectors,
but you'll still some have fingerprints.
But once applied right (not easy btw )
they fit perfectly
Muta
you can look at the case-mate tough or the otterbox commuter, they both rock.
i bought the case-mate a few days ago, waiting untill it arrives
I also recommend the cases that other posters have, for a screen protector look no further than this.
http://www.amazon.com/SGP-Samsung-Galaxy-Protector-Oleophobic/dp/B0056C3JT6
Ive just recieved a Zenus Air Jacket looks sleek and smart, they do a range of colours, and it comes with a screen protector too, although i tried to fit mine and some dust came out of nowhere and went onto my screen so i had to bin it , hopefully the gorilla glass will protect instead
http://www.mobilefun.co.uk/zenus-skin-air-jacket-series-for-samsung-galaxy-s2-i9100-white-p29786.htm
I have a transparent Casemate Barely There.
It's a bit rigid but I think is the thinnest case on sale.
The transparent one gives to the phone a nice shiny look.
Suggested
I bought a hardcase, but i had the problem with the echo voice !
i heard my own voice twice !
is the problem fixed now?
In my personal opinion i like otterbox for SGS2, fits well, it has a metal cover for back side and plastic covers for usb port and earphones, i have one.
Enviado desde mi Samsung Galaxy S II
perso
Personally, I bought a pack screen protector + white case on ebay.
You can search on ebay :
LOT 7en1 Housse Etui Coque Rigide/FILMS Protecteur Pour Samsung Galaxy S2 i9100
sold by citephone
I just tried different case.
I prefer hard cover.
I try
1) Phoenix tough case: i broke upper corner, rubber come out after a bit of time
Vote: 3/10
Price around 15€
2) Samsung Original Mesh Vent case: Too sensitive and since have hole the dust come in and leave and put it many times to clean i broke the upper corner. In any case it offer a very low protection
Vote 5.5/10
Price around 18€
3)Tpu soft cover gel from ebay: it is not so soft but offer a better protection than other but for it's material attire too many dust on the border. It offer a good grip
Price 5€
Vote 6.5/10 (for now)
At end i buy also Case-Mate Tough that have 2 layer protection but it has not arrived.
Arrived
Perfect case optimal protection and grip. 2 thing. Inside silicon collect dust and dont put while phone is on because it press power button to reboot
Incipio NGP case. Martin Fields screen protector.
A lot of people are recommending products that does not stand out. I prefer to make my phone special so it stands out when I take it out. I like sleek , high tech looking things and thats what this setup is about:
I am currently using metal black battery cover:
http://forum.xda-developers.com/showthread.php?t=1263780
with real aluminum black phone case: (see akiba slider or SZLF slider)
http://forum.xda-developers.com/showthread.php?t=1263780
(SZLF or china made version on ebay for $30, search i9100 metal case)
with ultra optics
http://forum.xda-developers.com/showthread.php?t=1263780
result is a Sleek phone with a premium metal feel to it. The ultra optics cancels out fingerprints while maintaining good optical clarity. (you may need to clean it still every 1 week or so like any protector)
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.
1xinfusion said:
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.
Click to expand...
Click to collapse
I got the Incipio NGP case as well and it is pretty sweet--has a great feel and is thin, although the back is a little bit too smooth but I still like it.
That is a good idea on the housing. I might try a white housing.
What is your opinion on a screen protector? I don't like how it adds a layer and changes the feel--and besides, the SGS2 has gorilla glass.
resolved
JDBurnie said:
What phone case and screen protector could you recommend to me?
I like the case to look nice, i prefer the colour black, and i dont like it too bulky in the hand, but well protected
And ive tried a cheap screen protector, but the bubbles of death came, i cant stand the bubbles.
Any suggestions? price is not an issue, thanks guys
Click to expand...
Click to collapse
I have something that looks simular to this one:
http://www.google.at/imgres?imgurl=...kf28T-KiJNTP4QTeleRN&ved=0CH0Q9QEwBg&dur=1019
Just no lousy monkey on it and more manly colors. (actually the color is gray)
I feel that offers enough protection. I also have a silicone cover which I removed yesterday and decided to use a sock for my phone cause I found the silicone cover to be annoying although I did like it at first.
Thanks, ill keep that in mind
I have the HTC HC V701 Portfolio Case in White and find it fantastic. Even doubles as a viewing stand for films.
Just want to know from you guys experience.
Who makes the best cases/covers/shells for samsung?
And if any of you are using cases/shells/covers, which are you using? Would you recomend?
What are your experiences?
I'm not really a fan of the flipcases
Thanks
If you are on a high budget, you could look at the Impact-absorbing Tech21 cases.
Those are of high build quality.
I recently got a casemate tough case for my sgs4 mini and I am very pleased with it, both handling-wise and in terms of general ruggedness.
Did anyone get a screen protector? I loved the exim ultraprotect on my old nokia, but the s4 mini is my first phone with a capacitive touch screen and I am unsure if a screen protector will hurt its responsiveness.
I got a screen protector applied the moment I unpackaged my phone at the shop. They applied a Screenguard branded clear (non-matte) screen protector and responsiveness hasn't been an issue in the 4 weeks I've had the phone.
This screen protector ($4) is a fingerprint magnet though, but it has perfect cut-outs for the light, proximity sensors and front - facing camera as well as the home button.
Case
I just bought a Belkin case named "Grip Sheer Matte" in a blackish-brownish transparent tone for the black S4m (ha! SAM!).
It was 12€ in an electronics store here in .de but you can probably get it cheaper online (see link).
I like the soft and smooth feel. The case fits quite good and protects the back and all edges. The ports and buttons are accessible and the holes on the back for camera and speaker are in the right places.
Cheers,
CS
I bought the original Samsung Flip Cover with view... I think its the best but it was not cheap.
Just got a Samsung Flip Cover without view (which replaces the back cover). After using a ROCK flip case, a MERCURY Fancy Diary flip case and a simple metallic-red non-flip case, the Samsung Flip Cover seems to do its job best. The cover is heavy enough to hold itself down when the phone is facing up, and folds behind nicely such that it is comfortable to hold.
What's the point of having such a small metal bumper? In case of a drop it won't absorb any energy ...
Its probably to protect the original metal rim against scratches and bumps. Good for maintaining the resale value! (The screen protector will protect the front, and the back cover is replaceable)
damn.. i want those pretty and sturdy cases from otterbox, uag, spigen etc
Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..
charliebigpot said:
Does the S-View cover also protect the edges?
After almost 2 months I notice that I already have a couple of bumps right on the edge of the screen. I don't want to buy a thick shell since I bought the Mini exactly because of the sleaziness and the S-view looks quite nice..
Click to expand...
Click to collapse
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.
Whosat said:
No. The S-View cover replaces your back cover of the phone. Thus it only protects the back. The sides are exposed except for the left side of the phone where the cover flips over the phone.
Click to expand...
Click to collapse
For me the ideal would be a bumper, so that the edges are protected and I'm not carrying around a brick. I'll keep on duckduckgoing and see what I can find..
I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!
Whosat said:
I've been looking for a decent rubber bumper as well. I've only seen a metal one with a weird branding on the side. Do post here if you manage to find one!
Click to expand...
Click to collapse
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags
make onuond
Will a rubber bumper protect against a drop (say, from table height)? Will the S-view cover protect against a drop?
I wouldn't be bothered by scratch or bumps on the plastic housing. Mainly looking for protection against the screen/digitizer/glass breaking from a fall.
I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the back cover shines through a bit. Really looks good.
charliebigpot said:
I found this one here, http://www.mobilefun.com/40209-flexiframe-samsung-galaxy-s4-mini-bumper-case---black-clear.htm but I might actually get an official samsung case, it looks quite nice: http://www.samsung.com/se/consumer/mobil/mobil/mobiltillbehor/EF-PI919BNEGWW-gallery?subsubtype=bags
Click to expand...
Click to collapse
I ordered this one:
http://goo.gl/KusTUO
It kind a looks like the "Flexiframe" from mobilefun and for the price you can't go wrong.
axelpix said:
I bought this one.
Fits tightly around the S4 mini and does not add any bulk. The phone still looks very slim and small. Material is of good scratch resistance but probably not a real bumper. It's slightly transparent, so the Samsung logo and the silver pattern of the backt cover shines through a bit. Really looks good.
Click to expand...
Click to collapse
I just received the same case and it is better than expected. Took less than a week from Germany to UK and less than 10 GBP Inc postage.
This case is so small and thin that it doesn't alter the feel of the phone apart from the texture. It'sthin enough to fit in my S2 desktop charger/dock and also my windscreen mount with the case on.
I ordered the following in blue/black. It looks somewhat...different! I hope it's not too much when I put it on the phone. It came to six euros which is reasonable. I'll post my impressions when it arrives.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=171080302080&ssPageName=ADME:L:eek:C:US:3160
I'm a new Axon 7 owner and am currently searching for a case to use on this phone. The stock transparent case that comes with the phone is great but due to the fact it's a glossy plastic, it attracts a lot of grease from my fingers and feels dirty after a while. I also dislike it because the sweat from my hands will form into condensation on the back of the case. I also have a problem where the jack on my headphones (Audio Technica ATH-M50) is too large to fit in the hole provided.
I decided to purchase the Spigen 'Rugged Armor' case from Amazon after reading a lot of positive comments about it, but I have been left disappointed and debating whether to return it due to the sheer size and thickness that makes handling the phone (Which is already large enough!) incredibly difficult with small hands. The case does not add much friction despite the material used having a rubber-like appearance, and I actually feel more likely to drop the phone as a result of trying to fumble with the added size. As well as this, the cut-out for the headphone jack is still too small even though it's larger than the wider than the one seen on the stock case. I also find it a lot more difficult to access the fingerprint scanner due to the thickness of the case surrounding it. Another problem is that the case is quite difficult to put onto the phone and a lot harder to remove, to the point where it feels like i'm actually going to damage the phone by attempting to do this!
For my previous phone, a Lenovo ZUK Z2, I had a fantastic Nillkin 'Frosted Shield' shell case that was made from a soft-touch rubber-like plastic. It was very slim at about 2mm in thickness at most, and although it didn't offer much in the way of drop-protection, it did have a nice textured back and that increased the grip tremendously. So, despite the case not being able to protect the phone quite as much from being dropped, it didn't matter because the chances of dropping the phone in the first place were a lot less likely. I wondered whether there was something similar for the Axon 7, but instead in a TPU-style with the sealed corners, and the same thickness as the stock case that's included with the phone? Any recommendations would be most appreciated.
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
That looks nice, it's kinda like the old Sandstone Black finish on the OnePlus One. There was one similar to this on Amazon UK but I don't think it had the same texture to it. My only compliant with that one is that it isn't a TPU case which completely covers the corners, but on the other hand the sand texture probably adds a lot of grip to reduce the risk of it being dropped.
I'm currently looking into getting the J&D case from their official website. It's in TPU-form which covers the entire phone (Except from the power/volume buttons!) and has the textured soft-touch back I wanted. The only problem with this one is that the glossy plastic edges look a bit tacky in the pictures, but hopefully it's not as bad in person as it looks on the website. I have a discount code which knocks a subtle 15% off the price listed, so it might be worth a shot.
Looking into this now myself. The stock clear case will go yellow as they all do. Getting cheap see through black case as a temporary till I find a good one. I find the clear one a tad loose at the side.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
Hi there,
Does this case provide good grip?
Thanks for confirming!
joaste said:
Hi there,
Does this case provide good grip?
Thanks for confirming!
Click to expand...
Click to collapse
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Sui77 said:
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Click to expand...
Click to collapse
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
joaste said:
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
Click to expand...
Click to collapse
This one is a different story.
It's the best pick you can get
Sui77 said:
This one is a different story.
It's the best pick you can get
Click to expand...
Click to collapse
Thanks. Just ordered it.
joaste said:
Thanks. Just ordered it.
Click to expand...
Click to collapse
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
P650SE said:
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
Click to expand...
Click to collapse
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
joaste said:
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
Click to expand...
Click to collapse
Thanks for posting those pictures! That's a shame to hear the grip wasn't as good as expected. I wanted something which provided more grip than the stock case, so maybe this isn't the right one for me. I also live in the United Kingdom and having the case shipped from Germany would make it more expensive in postage costs. It does look like a nice case but I am worried it might not offer much protection if the phone is dropped. I think the J&D case would perhaps be better because it has a soft-touch back and conceals all the corners properly.
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
christoophat said:
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
Click to expand...
Click to collapse
Thanks for sharing your thoughts and opinions regarding the cases available for the Axon 7. It's interesting to hear how you found the Spigen case not to be bulky, because I found the opposite and returned it for that exact reason. I eventually purchased one of the cheap, plastic shell cases from AliExpress similar to the that in the pictures Joaste posted above.
My overall opinion on this case has been positive but it has worn on the edges and there are cracks down all four corners. As you mentioned, a shell case does not offer much drop protection but it's definitely better than not having a case at all and it does improve the grip quite notably. However, I wish it had a textured or 'Sandstone' back to help avoid grease buildup.
I am now looking for another case, but options in the UK are limited since the Axon 7 is not officially sold here.
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
emepher said:
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
Click to expand...
Click to collapse
I decided to order one of these in black to try out. Have been quite happy with my Spigen, but after installing this Proworx case yesterday, I think I am falling in love. Seems to offer enough protection, fits & looks nice, AND I kind of like how the buttons are a bit harder to push in, which actually prevents me from squeezing open the screen every time I try to pick it up. :good:
RobboW said:
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
Click to expand...
Click to collapse
Quoting myself here.
Today I fitted the full coverage protector to my Axon 7 and it fits into the Poetic Revolution case nicely! Glad I stripped out the dry protectors in the Poetic cases. I've also now fitted a plastic protector over the glass one as a quick and easy tear off to sacrifice for wear and tear but the glass one makes the front of the phone flat. Even with two stacked protectors, touch works perfectly.
The picture is slightly misleading as the black section also covers the capacitive buttons so there's no indicator of position, but not being backlit anyway, it makes little difference.
Here's a quicky bunch of pics. I have a soft TPU smoky case, black Poetic Revolution and a blue/grey Poetic Revolution which can be mix and matched. Got a couple of little bubbles under the plastic protector and will fix that later, or just remove it. Looks good with just the full coverage glass one.
If anyone is looking for a slim case I just picked up a Bear Motion Sand from eBay. Best case I've had so far for my A7 and I've tried quite a few. Feels like my OPO did.
https://www.amazon.com/dp/B01J9Y5CQ...d_r=3683683e-ab8d-11e8-96dd-777fa7fb2507&th=1
Been using this one for over 6 months now with out any issues , not as bulky as it looks and the stand is useful . I also have a full body clear skin from clear-coat that fits superbly, clear-coat has various outlets through the UK and installs as you wait , is a bit pricey at £30 for the full skin .
I work in the building trade so need it well protected .