my wildfire is s-off and rooted successfully.
i was using galaxy nexus by jm xda rom and the phone suddenly switched off.
now when i try to reboot nothing happens.
i tried taking out battery , and replacing the same after 5 min and then even no change.
volume down + power does not help either.
when i connect to charging red led is flashing.
please help me out.
sorry with my english.
Related
Hi Guys last night my DHD was on low battery until power eventually switched of this morning i tried to recharge it and it gets stuck on white htc logo, i tried flashing my stock rom it does work, i would i go about flashing cwm 2.5xx if i cant get the phone to boot ? Please help I have rooted it and did a eng s-off long before this happened.
Apologies if you've already tried this,
If you remove battery & then hold the volume down button & power button until you get into the bootloader. Then select 'recovery', that will take you back to clockworkmod & you can restore or flash a new Rom from there
Sent from my Desire HD using XDA App
So, I rooted my Wildfire S and and was trying to flash some custom ROM's. While I was installing it froze and I turned it off by taking the battery off. Then when I turned it on it would only Vibrate 3 times, also the screen wouldn't turn on. I'm not sure what to do! Please help
Questions in q&a please. Check my unbrick tutorial for how to fix it
This is nit bricked. Boot to recovery, wipe partitions, restore.
Desire S • Fallout V2.0.0 • xda premium
Bricked?
@olyloh6696
I can't even get into recovery, every time I push Vol Down + Power all it does it Vibrate 3 times.
Gus194 said:
@olyloh6696
I can't even get into recovery, every time I push Vol Down + Power all it does it Vibrate 3 times.
Click to expand...
Click to collapse
Did you try my tutorial?
Sent from my HTC Wildfire S A510e using XDA
Bricked?
@vbhtt
Can you give me a link..? I can't seem to find it.
Bricked?
vbhtt said:
Did you try my tutorial?
Sent from my HTC Wildfire S A510e using XDA
Click to expand...
Click to collapse
Nevermind, I found. I'm doing it right now. Hope it works.
Bricked?
Alright, I downloaded the PG76IMG, I put that on my SD Card. Then, I pressed VOL DWN + Power all it did was Vibrate 3 times like before...
Try again.
I'd like to remind you that this does not work for everyone.
Gus194 said:
So, I rooted my Wildfire S and and was trying to flash some custom ROM's. While I was installing it froze and I turned it off by taking the battery off. Then when I turned it on it would only Vibrate 3 times, also the screen wouldn't turn on. I'm not sure what to do! Please help
Click to expand...
Click to collapse
it looks lyk u r in qualcomm diag mode....!
refer to this post u will get help
http://forum.xda-developers.com/showthread.php?t=1345273;)
After flashed rom CM10 for my Acro S, I cant start it, just stop at boot display and then black display. I tried to use flashtool to flash rom stock again, but...when Flashtool asked plug my phone to PC by USB cable (press volume down + plug), Led light is green a little second and then turn off and my phone show boot display and turn off. I tried many times...but cant fix, HELP ME!!!
Moved to Q&A
Please allow me to ask a question, do you have your phone full of battery?
Cz last time I faced similar problem, my phone was run out of battery also.
Sent from my Xperia S using xda app-developers app
Hello all dears...
I'm new user in XDA, please help me solve my problem
Thanks in advance...
I searched every where about this problem but my problem is a little different!
I faced a problem while root and s-off my desire hd with advance ace hack kit.
Everything was good until the step that pc couldn't find qualcomm cdma technologies msm driver!
So device makes 3 vibrates and goes to a black screen and orange light flashs! It doesn't go to boot loader, recovery , etc.
If press power + vol- it makes 5 vibrates and green light turns on!!
When connect to charger it goes to recovery but screen goes black immediately!
I put away device, after 10 minutes turn it on. BUT strangely it goes to bootloader by power + vol- without problem!!!
I had ViperDHD ROM in my sd card so I flash it. BUT after installation, phone restarts and again it makes 3 vibrates and goes to a black screen and orange light flashs!
I remove battery, after 30 seconds put it again and device started with ViperDHD ROM without problem!!!!!
NOW my problem is every time I reboot phone it makes 3 vibrates and goes to a black screen and I should remove battery and .....
Sometimes it goes to boot loader some times not!! No stable situation!
I just used aahk to root and unlock my inspire. Did you try going to their irc channel for help?
Sent from my Desire HD using xda app-developers app
Creative9170 said:
Hello all dears...
I'm new user in XDA, please help me solve my problem
Thanks in advance...
I searched every where about this problem but my problem is a little different!
I faced a problem while root and s-off my desire hd with advance ace hack kit.
Everything was good until the step that pc couldn't find qualcomm cdma technologies msm driver!
So device makes 3 vibrates and goes to a black screen and orange light flashs! It doesn't go to boot loader, recovery , etc.
If press power + vol- it makes 5 vibrates and green light turns on!!
When connect to charger it goes to recovery but screen goes black immediately!
I put away device, after 10 minutes turn it on. BUT strangely it goes to bootloader by power + vol- without problem!!!
I had ViperDHD ROM in my sd card so I flash it. BUT after installation, phone restarts and again it makes 3 vibrates and goes to a black screen and orange light flashs!
I remove battery, after 30 seconds put it again and device started with ViperDHD ROM without problem!!!!!
NOW my problem is every time I reboot phone it makes 3 vibrates and goes to a black screen and I should remove battery and .....
Sometimes it goes to boot loader some times not!! No stable situation!
Click to expand...
Click to collapse
That sounds like a hardware issue and not a hack kit problem. Actually, Hack Kit does not requiere qualcomm driver in any of the processes.
The software on my Nexus 7 went down ( didn't pass the X logo ) ... so I wanted to flash custom ROM with Nexus Root Toolkit ... The device was on the bootloader screen & I powered it off .... Then slept leaving my pc downloading the firmware from google site .. And in the morning the firmware is downloaded , but when I tried to power the nexus 7 to flash the ROM .. I got NO response , not even the charging indicator ...tried all buttons combinations and nothing works ... opened the back and the battery is well plugged ... tried to charge it with asus charger but won't charge ( even the charger is not warm !! ) .... Don't know what happened since the bootloader was working fine .... Is there any solutions ??
try to flash a rom called nexus7 restore in recovery mode (reboot to rec mode and double click Recovery_Nexus7.bat)
http://www.androidfilehost.com/?fid=23060877489996659
hwddj20 said:
try to flash a rom called nexus7 restore in recovery mode (reboot to rec mode and double click Recovery_Nexus7.bat)
Click to expand...
Click to collapse
I can't access recovery mode from nexus 7 ... no response on pressing any buttons .. like the device is dead
If you can at least get the LED to blink 5 times, then it is just because the battery is really drained.
I'd just leave it plugged in for a few hours and try turning it on again. Try pressing and holding the power button for 60seconds.
sfhub said:
If you can at least get the LED to blink 5 times, then it is just because the battery is really drained.
I'd just leave it plugged in for a few hours and try turning it on again. Try pressing and holding the power button for 60seconds.
Click to expand...
Click to collapse
Oh ... seems I posted in the wrong section ... actually I have the old nexus 7 ... I'm putting the post there but any help is appreciated
Plug it in a wall charger and hold the power button for 20secs. Worked for me. Sometimes just leave it alone for an hour, charging, and try again.
Sent from my SCH-I535 using Tapatalk 4