[Q] Kindle fire rooted but cannot install TWRP with kfu - Kindle Fire Q&A, Help & Troubleshooting

Hi all,
This is my first post. I live in the UK and bought my kindle fire brand new from ebay. The software version is 6.3.1.
I decided I wanted to root it quite quickly as I wanted to install apps / ICS etc as I dont find the amazon software useful.
I downloaded the kindle fire utility (v 0.96), installed the drivers (with the fire unplugged). When connected it is seen as android device with the driver as Android Composite ADB interface.
Using the kfu I then selected option 2 (root with superuser) and it rooted fine, although this did take a while.
It is seen in my PC a the drive "Kindle" and I can see the drive contents. On the kindle it says you can now transfer files.
In ADB is says - ADB status: Online, Boot status: 4000
The PROBLEM is trying to install TWRP recovery.
When I select this it says booting into fastboot (4002). The kindle boots to a screen where kindle fire is written in blue and the top of the screen v 1.4 is written, at the bottom it says press power button to choose boot options. TWRP fails to install immediately.
When I press the power button nothing happens until I hold it for 20 secs and the kindle power turns off. When I turn it back on the same blue kindle fire writing comes up and I have to select from:
- normal boot
- recovery
- reset boot
Pressing the power button allows you to select which option and all of them causes the kindle to boot up fine.
I can change the boot using kfu (option 1) to 4000 or 4002, however, even if I select 4002 and then try to install TWRP it says rebooting and fails the same as above.
I also cannot install fire fire fire either - the same problem occurs.
Basically I am totally stuck, am completely f***ed off and want to throw the kindle out of the window.
Answers greatly appreciated. Cheers in advance.
Mark

You might need to install TWRP manually from command prompt.
Put the device in fastboot (4002) and reboot
Download TWRP2.1 and place it in the KFU "tools" folder
Shift+right click on the KFU "tools" folder and select "open command window here"
In the prompt that opens up:
Code:
fastboot flash recovery exactnameofrecovery.img
Reboot and change your bootmode to normal.

thanks dragon
I used kfu to put into 4002, reboot and check it in 4002
I got openrecovery-twrp-blaze-2.1.1 disc image and put this in tools folder
I used Shift+right click on the KFU "tools" folder and select "open command window here"
In the prompt that opens up:
C:\kfu\tools\ fastboot flash recovery open-recovery-twrp-blaze-2.1.1
I get error: cannot load 'open recovery.......

Did you put .img at the end?

apologies forgot .img at the end
its still just hangs saying waiting for device...........

switched off the by holding the power off button for 20 secs
when I switched it back on it said:
sending 'recovery' (5568kb)... FAILED (data transfer failure (too many links))

Rename TWRP to something more manageable, like twrp.img (optional)
Turn the device off, completely
enter the command
turn the device back on
If you get the same error you might want to check the md5 hash of the TWRP download.
[Edit:] A search of the error message you received points to the wrong type of cable being used. Are you using a standard micro usb cable or one that came with another phone?

I never got a cable with the kindle fire, just a UK charger
I bought a USB data cable from amazon - could this be the problem?
what type of cable do I need??

I can't imagine why your cable wouldn't work, but everything I've seen points to the cable as being the problem. It could have a short or bad connection it it...who knows.
You could try different USB ports to see if that produces any results.

success
changed the file name, switched off the kindle, ran the command prompt, then booted up the kindle
how do I now check this is working?

apologies for spamming you but
where do I put the ROMs in the kindle? which directory?

When it boots up, hold the power button until options show up on the bottom of the screen and select "recovery".
---------- Post added at 03:37 PM ---------- Previous post was at 03:35 PM ----------
mark1holland1 said:
apologies for spamming you but
where do I put the ROMs in the kindle? which directory?
Click to expand...
Click to collapse
Anywhere...just remember where you put them. (sdcard is the preferred spot)
[Edit:] I should probably be more clear. You have to use recovery to flash the ROM, it doesn't install itself. Just be sure to perform a "Factory Reset" before flashing the ROM.

soupmagnet said:
When it boots up, hold the power button until options show up on the bottom of the screen and select "recovery".
---------- Post added at 03:37 PM ---------- Previous post was at 03:35 PM ----------
Anywhere...just remember where you put them. (sdcard is the preferred spot)
[Edit:] I should probably be more clear. You have to use recovery to flash the ROM, it doesn't install itself. Just be sure to perform a "Factory Reset" before flashing the ROM.
Click to expand...
Click to collapse
You can go to youtube and find how to install cyanogenmod 7 (OR ANY FIRE ROM) from NAT3MIL. And i installed TWRP 2.1.1 and FireFireFire 1.4a with the smirkit zip you don't need the computer for this.For me it works great.
Today i downloaded the AOKP for kindle fire build 36 you must try this one or Gederom from 13-05-2012 these two are amazing.

Link to smirkit.zip and instructions for anyone not wanting to search it out.
http://forum.xda-developers.com/showthread.php?t=1500935&highlight=smirkit+zip

Related

[Q] Kindle Fire Stuck in Yellow Triangle After Attempted Root

Hello,
I just received a Kindle Fire and decided to root and install Cyanogenmod. I found a tutorial which I thought looked pretty straightforward on Lilputing. I downloaded the Kindle Fire Utility and followed both the utility and the article told me to do. After installing TWRP 2.0, disaster. I rebooted the device and the Kindle read, "press power button for recovery," and showed a yellow triangle with a fire icon in the middle. I pressed the power button, and nothing happened. At this point, I rebooted. The device would not get passed this screen, and my PC would not recognize the Kindle. I presume I bricked my device, however (as I do not have any experience in this field) I honestly have no idea what I did, nor do I know where to go next. Any suggestions? Please help!
I'm stuck too. And i cannot install the driver because it is an unknown device.
kw1999 said:
Hello,
I just received a Kindle Fire and decided to root and install Cyanogenmod. I found a tutorial which I thought looked pretty straightforward on Lilputing. I downloaded the Kindle Fire Utility and followed both the utility and the article told me to do. After installing TWRP 2.0, disaster. I rebooted the device and the Kindle read, "press power button for recovery," and showed a yellow triangle with a fire icon in the middle. I pressed the power button, and nothing happened. At this point, I rebooted. The device would not get passed this screen, and my PC would not recognize the Kindle. I presume I bricked my device, however (as I do not have any experience in this field) I honestly have no idea what I did, nor do I know where to go next. Any suggestions? Please help!
Click to expand...
Click to collapse
Try this:
1) Download v6 of the Kindle Fire Utility from here. (The forum thread can be found here)
2) Extract the files into a folder anywhere (but remember where, obviously)
3) Go into the folder, then into 'drivers' and open up adb_usb.ini in a text editor and add "0x18D1" (without the quotes) on a line underneath "0x1949"
4) Open up Device Manager and find "kindle". It should have a yellow triangle near it.
5) Download fastboot.exe from here
6) Open up command prompt and navigate to wherever you saved fastboot to.
7) Run the command "fastboot oem idme bootmode 4000"
8) Power off your device by holding down the power button for ~10 seconds and turn it back on, and this time don't hit the power button to go into TWRP. It should move past the yellow triangle after a few seconds and boot into Kindle. Hope this helps!
Thank you!
I did, however, find a solution using the Kindle Fire Utility.
With my device connected to my computer, I selected Change BootMode. Next, I chose Normal. That brought me out of the frozen boot screen, so I decided to wing it and flashed Cyanogenmod, and that worked. Thank you anyway for your time.
bikeracer4487 said:
Try this:
1) Download v6 of the Kindle Fire Utility from here. (The forum thread can be found here)
2) Extract the files into a folder anywhere (but remember where, obviously)
3) Go into the folder, then into 'drivers' and open up adb_usb.ini in a text editor and add "0x18D1" (without the quotes) on a line underneath "0x1949"
4) Open up Device Manager and find "kindle". It should have a yellow triangle near it.
5) Download fastboot.exe from here
6) Open up command prompt and navigate to wherever you saved fastboot to.
7) Run the command "fastboot oem idme bootmode 4000"
8) Power off your device by holding down the power button for ~10 seconds and turn it back on, and this time don't hit the power button to go into TWRP. It should move past the yellow triangle after a few seconds and boot into Kindle. Hope this helps!
Click to expand...
Click to collapse
For me 7 resulted in a device not found, though I fixed this by rebooting the kindle (I guess fastboot mode ends at some point?)
So after I fix this - how do I get into TWRP? Trying to install it from the utility does not work!!
andTab said:
For me 7 resulted in a device not found, though I fixed this by rebooting the kindle (I guess fastboot mode ends at some point?)
So after I fix this - how do I get into TWRP? Trying to install it from the utility does not work!!
Click to expand...
Click to collapse
Unfortunately, I don't know. I've been trying to get in TWRP all night and have been unsuccessful. I knew how to get out of this issue because I've put myself here several times tonight, trying to get TWRP to start up...so far, no luck...
I had same problem. Kept booting to "press power button for recovery" but never went to recovery. I had to download and install FireFireFire manually after i installed twrp. Now works great. Just power off then hold power button in for few seconds (until it turns orange) when powering back on, release, then there's twrp.
Wired0980 said:
I had same problem. Kept booting to "press power button for recovery" but never went to recovery. I had to download and install FireFireFire manually after i installed twrp. Now works great. Just power off then hold power button in for few seconds (until it turns orange) when powering back on, release, then there's twrp.
Click to expand...
Click to collapse
THANK YOU! This fixed the problem, I just had to find the thread that was ONLY FireFireFire, and not combined with TWRP, since that hadn't worked for me. I included instruction below for anyone having similar issues:
I downloaded the u-boot.win from here then ran
Code:
fastboot flash bootloader u-boot.bin
at which point it sait "Waiting for device". So I rebooted the Kindle like had the last several times that's appeared and it flashed it and then I rebooted again and I held down the power button, and it turned amber, like it had earlier, except THIS time it actually booted into TWRP!! Hooray! Hope this helps anyone else having this issue.
bikeracer4487 said:
Try this:
1) Download v6 of the Kindle Fire Utility from here. (The forum thread can be found here)
2) Extract the files into a folder anywhere (but remember where, obviously)
3) Go into the folder, then into 'drivers' and open up adb_usb.ini in a text editor and add "0x18D1" (without the quotes) on a line underneath "0x1949"
4) Open up Device Manager and find "kindle". It should have a yellow triangle near it.
5) Download fastboot.exe from here
6) Open up command prompt and navigate to wherever you saved fastboot to.
7) Run the command "fastboot oem idme bootmode 4000"
8) Power off your device by holding down the power button for ~10 seconds and turn it back on, and this time don't hit the power button to go into TWRP. It should move past the yellow triangle after a few seconds and boot into Kindle. Hope this helps!
Click to expand...
Click to collapse
Thank you so much!!!!!! i thought my device was a gonner... and i just got it today
how can you remove TWRP from kindle fire if it's possible, whatit to boot likeif i just got itout of the box, which i did today when i recieveit.
Thanks.
bikeracer4487 said:
Try this:
1) Download v6 of the Kindle Fire Utility from here. (The forum thread can be found here)
2) Extract the files into a folder anywhere (but remember where, obviously)
3) Go into the folder, then into 'drivers' and open up adb_usb.ini in a text editor and add "0x18D1" (without the quotes) on a line underneath "0x1949"
4) Open up Device Manager and find "kindle". It should have a yellow triangle near it.
5) Download fastboot.exe from here
6) Open up command prompt and navigate to wherever you saved fastboot to.
7) Run the command "fastboot oem idme bootmode 4000"
8) Power off your device by holding down the power button for ~10 seconds and turn it back on, and this time don't hit the power button to go into TWRP. It should move past the yellow triangle after a few seconds and boot into Kindle. Hope this helps!
Click to expand...
Click to collapse
I tried this and it won't work, what am I doing wrong ?
Why is there a step 4? Is it only there so I check if kindle shows up or do I have to update its driver so there is no yellow triangle anymore?
EDIT:
So I managed to get it running. What I did is I added the "0x18D1" as in step 3 but after that I opened my device manager and by clicking on kindle (that has yellow triangle next to it) I updated its driver. I chose the location of adb_usb.ini that I edited. After that I ran Kindle Fire Utility and chose option 1 (Boot mode) and in the following menu I tried all of the options. In the option 3 (Recovery) it did something and now every time I boot kindle it goes to the yellow triangle but by pressing power button once it starts normal boot.
Ok, but still I would like to get it completely back to normal if possible so if anyone can help, thanks
It is supposed to show the recovery triangle EVERY time you reboot.
Just don't touch anything and it will continue to boot on its own to the OS.
The only time you should do something different is if you want to boot into recovery, then you push the power button until it turns orange and let go, it will boot into the TWRP recovery.
You really shouldn't need reboot the machine often. I do it maybe once every couple days at most.
nuttmeg said:
how can you remove TWRP from kindle fire if it's possible, whatit to boot likeif i just got itout of the box, which i did today when i recieveit.
Thanks.
Click to expand...
Click to collapse
To remove TWRP and go back to the stock Amazon ROM, all you have to do is flash the stock Amazon firmware. Use Kindle Fire Utility v.7 to download the stock update.zip, copy the file to the SD card, boot into recovery, and install it.
---------- Post added at 05:30 PM ---------- Previous post was at 05:25 PM ----------
kw1999 said:
Hello,
I just received a Kindle Fire and decided to root and install Cyanogenmod. I found a tutorial which I thought looked pretty straightforward on Lilputing. I downloaded the Kindle Fire Utility and followed both the utility and the article told me to do. After installing TWRP 2.0, disaster. I rebooted the device and the Kindle read, "press power button for recovery," and showed a yellow triangle with a fire icon in the middle. I pressed the power button, and nothing happened. At this point, I rebooted. The device would not get passed this screen, and my PC would not recognize the Kindle. I presume I bricked my device, however (as I do not have any experience in this field) I honestly have no idea what I did, nor do I know where to go next. Any suggestions? Please help!
Click to expand...
Click to collapse
I had this same problem a few days ago. I fixed it by going into Device Manager, finding the device called "kindle" (it had a yellow triangle next to it) and manually installing the ADB drivers. You can't search for drivers automatically, you have to manually specify the "ADB Composite Interface" or something to that effect.
I have also had this issue, thought it was because I was using a 64 bit windows 7 system.
I had previously installed cyanogenmod 7 using destructions from this forum, and I have also done something similar with my Galaxy S2 (I mention this, because this may be why the drivers havent worked?)
Anyway, I added the line above, then rebooted my PC (twice), and then unplugged my kindle fire and rebooted. I then plugged it in to the PC and it came up as "kindle" in device manager, but had the exclamation mark warning. I clicked update driver and found the updated usb.ini file. Windows did its stuff and then it appears as Android bridge device.
The kindle wa still stuck at the yellow triangle, but selection the fastboot menu option 1, then boot normal and it worked a charm.
Persevere and dont give up!
Thanks to the great advice on this forum, everything becomes easy, once you have found the right posts!
bikeracer4487 said:
Try this:
1) Download v6 of the Kindle Fire Utility from here. (The forum thread can be found here)
2) Extract the files into a folder anywhere (but remember where, obviously)
3) Go into the folder, then into 'drivers' and open up adb_usb.ini in a text editor and add "0x18D1" (without the quotes) on a line underneath "0x1949"
4) Open up Device Manager and find "kindle". It should have a yellow triangle near it.
5) Download fastboot.exe from here
6) Open up command prompt and navigate to wherever you saved fastboot to.
7) Run the command "fastboot oem idme bootmode 4000"
8) Power off your device by holding down the power button for ~10 seconds and turn it back on, and this time don't hit the power button to go into TWRP. It should move past the yellow triangle after a few seconds and boot into Kindle. Hope this helps!
Click to expand...
Click to collapse
The page wont load to download that version of KFU. Also everytime I try to download fastboot I get an error saying AdbWinApi.dll is missing from my computer. Where do I find that?
http://forum.xda-developers.com/showthread.php?t=1399889
and the missing file is in kfu
krelvinaz said:
It is supposed to show the recovery triangle EVERY time you reboot.
Click to expand...
Click to collapse
That can't be right, surely?
bikeracer4487 said:
Try this:
1) Download v6 of the Kindle Fire Utility from here. (The forum thread can be found here)
2) Extract the files into a folder anywhere (but remember where, obviously)
3) Go into the folder, then into 'drivers' and open up adb_usb.ini in a text editor and add "0x18D1" (without the quotes) on a line underneath "0x1949"
4) Open up Device Manager and find "kindle". It should have a yellow triangle near it.
5) Download fastboot.exe from here
6) Open up command prompt and navigate to wherever you saved fastboot to.
7) Run the command "fastboot oem idme bootmode 4000"
8) Power off your device by holding down the power button for ~10 seconds and turn it back on, and this time don't hit the power button to go into TWRP. It should move past the yellow triangle after a few seconds and boot into Kindle. Hope this helps!
Click to expand...
Click to collapse
Kindle is not recognized? Please help?
Uninstall/reinstall device drivers and try again.
Sent from my Amazon Kindle Fire using xda premium
Wired0980 said:
I had same problem. Kept booting to "press power button for recovery" but never went to recovery. I had to download and install FireFireFire manually after i installed twrp. Now works great. Just power off then hold power button in for few seconds (until it turns orange) when powering back on, release, then there's twrp.
Click to expand...
Click to collapse
I am having this problem and have gone back to install FireFireFire manually but I still get stuck at "press power button for recovery". If I leave it alone it eventually boots as normal. If I press and hold the power button for a few seconds, it turns orange but never does anything. Any ideas?
I should mention that I'm running Ubuntu Linux - no access to Windows so KFU is not an option. My Fire is at version 6.3 and I've been roughly following the guide here: http://forum.xda-developers.com/showthread.php?t=1568340

[Q] [q] kindle fire problems! Please help :(

I rooted my kindle fire, using an instructional video from YouTube.
The root was successful, and then I tried to install TWRP using the Kindle Fire Utility software, but the process was unsuccessful causing my Kindle to be stucked on a screen with a Yellow Triangle Icon.
After going through several tread, a came across an interesting one saying use fast boot to restore the device. The method included:
1) Download v6 of the Kindle Fire Utility from here. (The forum thread can be found here)
2) Extract the files into a folder anywhere (but remember where, obviously)
3) Go into the folder, then into ‘drivers’ and open up adb_usb.ini in a text editor and add “0x18D1″ (without the quotes) on a line underneath “0×1949″
4) Open up Device Manager and find “kindle”. It should have a yellow triangle near it.
5) Download fastboot.exe from here
6) Open up command prompt and navigate to wherever you saved fastboot to.
7) Run the command “fastboot oem idme bootmode 4000″
8) Power off your device by holding down the power button for ~10 seconds and turn it back on, and this time don’t hit the power button to go into TWRP. It should move past the yellow triangle after a few seconds and boot into Kindle.
But the method failed at the step 7 with an error message saying “The program can’t start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem.”
I REALLY REALLY WANT TO BE ABLE TO USE MY KINDLE AGAIN!
PLEASE HELP ME!
ok do you have the newest version of kfu?
Just download the latest find the tools folder shift+right click on the folder itself select open command window here plug your kindle in then type fastboot oem idme bootmode 4000 your kindle should boot normal.

Stuck in boot loop after failed root.

i was curious to get get android market on my kindle today.. and looked up how. i used the kindle fire utility to root it. then my KF it started to go into a loop of the boot logo. it just flashes on and flashes off over and over again.hard reset doesnt affect it at all, it wont even turn off unless i unplug it. it doesnt show up on my computer either.
i dont know if this helps but when i ran the Kf utility it said 'findstr' not recognized.. blah blah blah. and it didnt give me the 1234567 options on there. i just typed in '2' and pressed enter because thats what the video told me .-. it doesnt have a triangle, or a blue screen logo either just the kindle fire logo flashing off and on. I honestly am lost. please keep this noob friendly
i am running win 7. 64 bit.
josepho1997 said:
It seems like your stuck in fastboot mode. You need to reinstall the drivers manually and then go into KFU. Press 1(bootmode)and 1(normal). If you still want to root it, when it gets to installing fff, and if it says <waiting for device>, you need to do a hard reset and your Kindle, unplug, plug it back in, and manually install the drivers. Then it will finish rooting.
Click to expand...
Click to collapse
How do you reinstall the drivers manually? and also when i go into the kindle fire utility it doesnt give me 1,2,3,4,5,6,7 options... it just says findstr is not a recognized as an internal or external command, operable program or batch file. and another thing i tried another utility on here and it said it said my device was not found when i plugged it in , is it because it turns off every 5 seconds?
First before you mess with your drivers shift+ right click on the tools folder in kfu select open command window here power your device off completely leave it unplugged type fastboot -i 0x1949 getvar product when it says waiting for device plug in your powered off kindle it should then power on in fastboot mode if you get the response product: kindle then type fastboot -i 0x1949 oem idme bootmode 4000 it will say okay hopefully the type fastboot -i 0x1949 reboot it should then reboot in normal mode
Edit: hit enter after each command
zellerax said:
How do you reinstall the drivers manually? and also when i go into the kindle fire utility it doesnt give me 1,2,3,4,5,6,7 options... it just says findstr is not a recognized as an internal or external command, operable program or batch file. and another thing i tried another utility on here and it said it said my device was not found when i plugged it in , is it because it turns off every 5 seconds?
Click to expand...
Click to collapse
Sounds like there's some sort of PATH problem with your setup, which is why KFU won't work properly. You'll have to manually use ADB/fastboot commands if you want to get things done.
About it turning off constantly, it's probably out of battery. Use the stock wall charger (it provides a greater power output, don't bother with USB or a random clone) so it can refill some. The bootloops may be due to a bad boot mode, but it's a bit hard to pinpont with your description of the issue.
You may want to have a read here, it'll help you to better understand what's going on and how to express yourself about the problems you are experiencing: http://forum.xda-developers.com/showthread.php?t=1552547
zellerax said:
How do you reinstall the drivers manually? and also when i go into the kindle fire utility it doesnt give me 1,2,3,4,5,6,7 options... it just says findstr is not a recognized as an internal or external command, operable program or batch file. and another thing i tried another utility on here and it said it said my device was not found when i plugged it in , is it because it turns off every 5 seconds?
Click to expand...
Click to collapse
You might have corrupt drivers. Here's how to reinstall them:
Try going to your Control Panel >> Device Manager. If you see an entry for "Android Phone," (Android ADB interface) delete it (and any associations with Portable Devices >> KF or Kindle Fire).
Restart computer.
Then go to your KFU utility folder, open "install_drivers.bat" (right-click "Run Administrator"). This shouldn't take long at all.
You might want to restart here too after.
Then open KFU utility, plug in Kindle - if all went well here, you should read something along the lines of "Online" and "4000".
I am a similar situation
Hi Guys,
I rooted my KF with no issues, was able to copy the Jellybean and Gapp zip file to the SD and thought I flashed with no issues. Then rebooted. Now the KF is stuck in a boot loop. If I boot to recovery, that works and allows me the recovery options. if I boot up to normal, it constantly reboots, if I boot to fastboot, it displays the Kindle Fire logo and says "press power button to boot menu" at the bottom and does nothing else. My computer recognizes it as Android ADB interface but will not allow to access the SD ram. Any help would be greatly appreciated.
It's usually better to start your own thread here on Q&A.
Are you able to access the SD Card from TWRP? (Mount USB)
If so and the ROM is still in there, wipe cache, dalvik-cache, factory reset and system, then flash/install the ROM again (don't install gapps yet) and reboot. If it boots all the way to the desktop, reboot to recovery and install gapps.
You may also want to check the ROM's hash.
You haven't mentioned what versions of TWRP and FFF do you have, either. Hopefully 2.1.1 or 2.2 for TWRP and 1.4a (blue "fire" on the kindle fire logo) for FFF.
Dasanko said:
It's usually better to start your own thread here on Q&A.
Are you able to access the SD Card from TWRP? (Mount USB)
If so and the ROM is still in there, wipe cache, dalvik-cache, factory reset and system, then flash/install the ROM again (don't install gapps yet) and reboot. If it boots all the way to the desktop, reboot to recovery and install gapps.
You may also want to check the ROM's hash.
You haven't mentioned what versions of TWRP and FFF do you have, either. Hopefully 2.1.1 or 2.2 for TWRP and 1.4a (blue "fire" on the kindle fire logo) for FFF.
Click to expand...
Click to collapse
Thanks for the info and sorry for the incomplete initial info. I will check this as soon as I get home and can work on it again.
Thanks for your help. It turns out that I didnt even have TWRP installed. Thats fixed. I was able to get roms installed and have different problems. (Will start a new thread in another area) Thank you very much for your help.

Kindle Fire stuck in TWRP boot loop, wont mount, not recognized.

I foolishly let someone try to root my Kindle Fire, and now it is stuck in what seems to be the TWRP boot loop (the kindle fire is blue and white). If I leave it alone unplugged it will occasionally continue to the Kindle Fire orange and white screen but will not go any farther. From the Blue/white screen I can hit the power button to enter the boot menu where I get Normal Boot, Recovery, and Reset Boot Mode. I can enter TWRP recovery menus, but otherwise it just keeps rebooting. Once in the TWRP recovery screen I can only navigate for a short time before it locks up and I have to reboot by holding the power button in. The sd card will not mount, and they did not backup anything before they started messing with the os. Ive tried the Kindle Fire utility but it says device not found. The Kindle showed up in my device manager as Other-Kindle before I installed the android drivers mentioned in another thread, and now it is under Android Phone- Android ADB Interface. It doesnt show up in My Computer at all. I've read about the factory cable but cant find on in the US so it would take 2 weeks to get here from China. Any suggestions on how to fix this, or do I now have a $200 paperweight? Thanks in advance.
Kamakookie said:
I foolishly let someone try to root my Kindle Fire, and now it is stuck in what seems to be the TWRP boot loop (the kindle fire is blue and white). If I leave it alone unplugged it will occasionally continue to the Kindle Fire orange and white screen but will not go any farther. From the Blue/white screen I can hit the power button to enter the boot menu where I get Normal Boot, Recovery, and Reset Boot Mode. I can enter TWRP recovery menus, but otherwise it just keeps rebooting. Once in the TWRP recovery screen I can only navigate for a short time before it locks up and I have to reboot by holding the power button in. The sd card will not mount, and they did not backup anything before they started messing with the os. Ive tried the Kindle Fire utility but it says device not found. The Kindle showed up in my device manager as Other-Kindle before I installed the android drivers mentioned in another thread, and now it is under Android Phone- Android ADB Interface. It doesnt show up in My Computer at all. I've read about the factory cable but cant find on in the US so it would take 2 weeks to get here from China. Any suggestions on how to fix this, or do I now have a $200 paperweight? Thanks in advance.
Click to expand...
Click to collapse
Maybe go into twrp and do a factory reset. Can you get to that menu? Click wipe and then factory reset.
I've tried the factory reset but it seems to have no effect on it. How do I do the adb push? I've tried using the command prompt to run some of the commands on other threads but I'm not doing something right. I always get an 'adb' is not recognized as an internal or external command, operable program or batch file error.
I'll apologize now for my stupidity on this one- I have never worked with android software before this.
The kindle fire utility reads:
ADB status: Offline
Boot Status: Unknown
I can get it to boot in normal and recovery mode, but each time I try to boot in Fastboot I get an error message 'Oops... something went wrong. We are unable to locate your Kindle Fire. Make sure it is plugged in and powered on.' The Kindle shows up in Device Manager under Android Phone as Android ADB Interface
When using the twrp, anything that involves writing to or wiping the sd card receives this error E:failed to mount /sdcard (invalid argument)
I'd appreciate any help I can get. I'm at a standstill on this one.
im in the same position you can open it as a USB by selecting mount in TWRP and selecting mount USB Storage
do you have drivers / ADB on your computer ?
I did manage to get my kindle go into a recovery boot loop by doing the root procedure for the original 6.3 original Amazon ROM while my kindle had the 6.2 ROM . After i realized that the root procedure (intended for ver 6.3) didn't work for me, I had to try the procedure for rooting ver. 6.2.
It worked but after a couple of resets, the tablet went into a recovery boot loop.
what i did was to use ADB comands:
enter windows - > start command prompt (start - > run -> cmd)
check if kindle is connected: adb devices
if the device is found then use:
adb shell
su
idme bootmode 4000
exit
Hi all, I'm having a problem with my Kindle Fire. It is automatically booting into TWRP no matter what I do.
I have wiped everything, and installed the stock ROM, and when I reboot it just goes back to TWRP.
There is always a message of *verifying file system and *verifying partition. I can mount it and move files via USB.
In the fire utility it reads
ADB Status: Online
Boot Status: Unknown
If I try to change the bootmode it comes back waiting for device. I then got into the command line.
Doing "adb devices" shows it as being in recovery. I can reboot it from here, but goes right back to twrp.
I tried to do the adb shell--> su--> idme bootmode 4000
but after I do the shell it comes back that "su" isn't valid. I'm assuming I am doing something wrong, but I can't
for the life of me figure it out...any suggestions? Thanks in advance!
lukebunny said:
Hi all, I'm having a problem with my Kindle Fire. It is automatically booting into TWRP no matter what I do.
I have wiped everything, and installed the stock ROM, and when I reboot it just goes back to TWRP.
There is always a message of *verifying file system and *verifying partition. I can mount it and move files via USB.
In the fire utility it reads
ADB Status: Online
Boot Status: Unknown
If I try to change the bootmode it comes back waiting for device. I then got into the command line.
Doing "adb devices" shows it as being in recovery. I can reboot it from here, but goes right back to twrp.
I tried to do the adb shell--> su--> idme bootmode 4000
but after I do the shell it comes back that "su" isn't valid. I'm assuming I am doing something wrong, but I can't
for the life of me figure it out...any suggestions? Thanks in advance!
Click to expand...
Click to collapse
At startup hold thepower button untill you see the bootmenu come up and select "normal boot"
On the Kindle itself you mean? There is no bootmenu. I get the Kindle Fire (Orange) text, then goes straight to twrp, and if I do normal reboot from there, just straight back to twrp.
lukebunny said:
On the Kindle itself you mean? There is no bootmenu. I get the Kindle Fire (Orange) text, then goes straight to twrp, and if I do normal reboot from there, just straight back to twrp.
Click to expand...
Click to collapse
What version of TWRP do you have?
2.2.0
From twrp try booting into recovery that worked once for me to get a normal boot. Then make sure you put the fire fire fire bootloader on there so it never happens again
Sent from my DROID SPYDER using Tapatalk 2
jamminjon82 said:
From twrp try booting into recovery that worked once for me to get a normal boot. Then make sure you put the fire fire fire bootloader on there so it never happens again
Sent from my DROID SPYDER using Tapatalk 2
Click to expand...
Click to collapse
Tried it, no go.
This is what I get in the command line
The "<[6n" is likely the result of pressing the up or down arrow with number lock turned off and it is causing the command to be unrecognized.
Regardless, there's no need to use the "adb shell su -c..." command to get into fastboot. Instead use Pokey9000's bootmode binary "fbmode".
http://forum.xda-developers.com/showpost.php?p=20755810
Have you tried reboot to bootloader?
Sent from my Galaxy Nexus using Tapatalk 2
hey i got your answer I think? lol anyways...
soupmagnet said:
The "<[6n" is likely the result of pressing the up or down arrow with number lock turned off and it is causing the command to be unrecognized.
Click to expand...
Click to collapse
i'm pretty sure it's bla bla bla \platform-tools in that picture anyways that my answer anyways, maybe not but goodluck anyways........... and this 5 mins between post for low posting users is for the birds
digital_cha0s said:
i'm pretty surs it's bla bla bla \platform-tools in that picture anyways that my answer anyways goodluck
Click to expand...
Click to collapse
As you can see, the "adb shell" command is successful because of the change in the prompt.
~ # <-indicates the shell is working and active, so the actual /path of adb is irrelavent.
soupmagnet said:
Regardless, there's no need to use the "adb shell su -c..." command to get into fastboot. Instead use Pokey9000's bootmode binary "fbmode".
http://forum.xda-developers.com/showpost.php?p=20755810
Click to expand...
Click to collapse
That seems promising, but this is what I got when I tried it.
Also, thanks for your help everyone, I'm learning a lot as I go here!

e:system is not installed - preventing reboot!

help what have done ? is it bad
You're going to have to provide entirely more detail than "system is not installed - preventing reboot"
Read this:
http://forum.xda-developers.com/showpost.php?p=25884555
got menu
ok by holding power button ive ended up with a menu of
install backup restore wipe
mount settings advanced reboot
but where do i go from here ?
sorry for being a cabbage
Using your computer, find and download a ROM of your choice...
http://forum.xda-developers.com/showpost.php?p=30866894
The screen you're looking at on your Kindle is the TWRP recovery screen. Select "Mount" and then mount sdcard to USB. On your computer, look in your file system for an extra drive named "KINDLE" or "UNKNOWN". That is your sdcard partition mounted as if it were a USB pen drive.
Transfer the ROM you downloaded from your computer to the sdcard (not in a folder). "Eject" the sdcard partition and select "Unmount" on your Kindle. Use the back arrow on the TWRP menu to get back to the main menu.
Once you're at the main menu, select "Wipe". Wipe your System partition and "Factory Reset". Go back to the main menu.
Select "Install" and use the pane on the right hand side to find and select the ROM you transferred earlier. Then, towards the bottom, select or swipe to flash the ROM. When it's finished, it will give you the option to wipe Dalvik and Cache, go ahead and do so.
Then, select "Reboot" then reboot "System".
ok
done that and when it reboots it goes dtraight back to twrp , that right or wrong ? where is the kindle desktop.
p.s chose the otter one
Okay, if when you boot, you see a blue and white Kindle Fire logo, you're in pretty good shape.
When you see the blue Kindle Fire logo, press and hold the power button until you see the boot menu appear at the bottom. Select "Reset boot mode".
---------- Post added at 12:52 PM ---------- Previous post was at 12:49 PM ----------
By the way, the "otter" one is likely outdated. Choose MoDaCo instead; same but better.
your a diamond
[ROM] 14 Jun Gr9 (6.3.1) - MoDaCo Custom ROM for the Kindle Fire
this one
soupmagnet said:
Okay, if when you boot, you see a blue and white Kindle Fire logo, you're in pretty good shape.
When you see the blue Kindle Fire logo, press and hold the power button until you see the boot menu appear at the bottom. Select "Reset boot mode".
---------- Post added at 12:52 PM ---------- Previous post was at 12:49 PM ----------
By the way, the "otter" one is likely outdated. Choose MoDaCo instead; same but better.
Click to expand...
Click to collapse
thanks
thanks big time
huggybear518 said:
[ROM] 14 Jun Gr9 (6.3.1) - MoDaCo Custom ROM for the Kindle Fire
this one
Click to expand...
Click to collapse
::good::
TRWP error "e:system is not installed - preventing reboot!"
huggybear518 said:
help what have done ? is it bad
Click to expand...
Click to collapse
Pleasehelp123 said:
I tried applying a new update so everything would erase but it wont work and it wont let me reboot because i dont have the os installed.
Click to expand...
Click to collapse
I had the same problem and rebooted the device through adb in a Windows cmd window.
0. Connect device through USB to your PC.
1. Open Windows Start menu
2. Type cmd in the search field and start it
3. Type in "cd C:\Program Files\Android\android-sdk\platform-tools"
4. Type in "adb reboot recovery" and press enter
5. Device should reboot to recovery again
6. Flash new ROM

Categories

Resources