Screwed up my phone. HELP!! - HTC Wildfire S

So, I was running CM9 with D2SD but wanted to remove it because I was getting some problems so I tried to restore my backup with the normal CM9. It didn't restore properly. I then thought that anyways the internal member is very low on CM9 then I should try out MTDPartition. I forgot to edit the txt file which is using while flashing CM7 . It installed but didn't pass the boot screen. I tried flashing again but no use. So I downloaded CWM again and flashed it. Then tried installing CM7. Didn't install! So I flashed CWM again and tried with MTD. It installed.
Everything was working normally. I wanted to flash a theme so I rebooted into recovery and flashed that theme (Which I was using since over a month). It just didn't start my phone then.
Now everytime I reboot, my phone starts the boot screen and then suddenly gets stuck and restarts again. This happens again and again. I tried flashing CM7 and CM9 again but same thing happens always
Please HELP!

Have you tried installing CWM recovery again?
I would recommend, install CWM again, then run superwipe, then MAKE SURE YOU REBOOT INTO RECOVERY (NOT REBOOT SYSTEM), then flash your rom again.
(thanks to blueridge wfs team for the sharing superwipe script).

Before flashing your rom, did you perform the following steps?
1. Wipe Data/Factory Reset
2. Wipe Cache
3. Wipe Dalvik
If not, try to do that first, then flash your rom.

Related

[Q] Help.... phone stuck in saying "CyanogenMod 7"...

HI... i updated my phone with cyanogen 7 rc2, but after it booted up it's stuck in the animation that says cyanogen mod 7 , and the blue android sign... in comes than goes, again it comes... about 20 min stuck... what to do???
It sounds like you need to go into recovery mode and delete all your caches. If you are using ClockworkMod recovery do the following (make sure you are backed up first):
Delete all user data and info (under wipe data/ factory reset),
Wipe cache (under wipe cache partition),
Wipe Dalvik Cache (under advanced).
Then once you've done that try installing and running the ROM again.
i done that one time... for info im using AmonRA.. i cleaned all the cache and everything also... and installed again... nothing happens... fortunately i restored my nand backup and booted my phone with the OTA again... waiting for some answer.... do u think that installing stable version can fix this?
Sounds like a bad flash. I had rc2 running for a month or so with no issues. I've had times when the rom just doesn't install properly ans reflashing fixes it.
Download the zip again, if possible check md5 to make sure it's all good, make sure you have the desire/bravo GSM version, clear everything and flash just the rom and nothing else. If it boots, then go back and flash your gapps and whatever else you want.
Sent from my HTC Desire using XDA App
thx for replying.. as i was waiting for your reply, i download the cm 6 that is a stable version and checked, it has the same problem too.. i also downloaded GingerVillain 1.6 and it had the same problem too. do u think the problem might be that my phone is "s-on"? and how should i know if my phone is s-on or s-off... when i was rooting my phone with unrevoked, i checked the option that says disable security, but i'm not sure if it's disabled.... because i can't install un-signed zip packages....
any reply?
That definitely sounds odd. Its definitely not an issue with S-ON/OFF, nothing you've done here requires S-OFF to work properly.
Lets just make sure you're following all the steps.
In amonra, you've done your nandroid backup, so no need to do it again. There's no point having a non working backup
Go to wipe and wipe data/factory reset
Wipe davlik cache
Wipe sd-ext (shouldn't need to do this one as you don't have apps2sd yet, but better to be safe)
Now you flash your update.zip, then reboot and you should be fine. The only other thing I can perhaps suggest if every rom you flash sticks at boot is to perhaps try clockwork recovery instead of amonra. Apart from that we might have to wait for folks more knowledgeable than myself cause I'm all out of ideas.
thx for reply.... in meanwhile , i s-off ed my phone and it has the same problem too... i have problem with all cm and gingervillain roms.. but i don't have any problem with leedriod... one more question that maybe the problem is that i have android 2.2 installed, but gingervillain and cm use android 2.3 ... this maybe the problem.... and that's why leedroid works right, because it uses android 2.2.... i'm going to check OxyGen roms... i will post the result here...
i also faced same problem CM7 .. i tried CM6 and it went on fine..
heyyy... right after i posted the reply , i went to recovery and wiped anything, then installed gingervillain 1.6, and everything's fine now... it booted up and now im setting it up.... im going to check the cm 7 too.
i tried cm7 rc2 ... and it was fine and now im using it... here's a how to for solving the problem...:
1.S-OFF your device with AlphaRev : http://forum.xda-developers.com/showthread.php?t=805811
2.Install the AlphaRev Recovery(S-OFF Image will do it automatically).
3.Go to recovery and install the rom...
4.Boot up and it should not go to system and it should stay in loop as the problem was..
5.Now you should reboot your device into recovery... there are two ways to do this... either take the battery off and put it on, then boot to bootloader by pressing the volume down and the power key and select recovery , or the second way connect it to your computer and start adb and run this command:
adb reboot recovery
6.In AlphaRev recovery first wipe the cache partition , wipe user data, and factory reset...
7.then install the rom (either cm7 or gingervillain)...
8. boot up , and now you have the system running...
This solved my problem... reply if it didn't yours...
hooo.. it worked for me now. just kept update.zip in a new SD card and not flashed google apps..
im very happy that i solved one's problem.. ... thread marked as solved...
*UPDATE* : now i realized that we can mark it as solved.. !!! hehe.. Admin do it for us...

[Q] TMO SGH-T989 cant wipe data, cant restore backup, cant do ANYTHING

SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium

HELP! Cannot Restore Nandroid or Wipe/ Install new Rom

What I did:
Flashed new rom (it loaded up no problem)
Rebooted into recovery
Did a Darkside cache wipe
Installed Gapps
Phone wouldnt boot...
Booted into recovery... attempted to Darskide Superwipe (to clear everything and try installing again)
Phone hangs on the wipe and doesnt finish... have to pull battery
Tried just doing a system wipe from the CWM menu..... phone hangs and doesnt finish....
Panicked... Tried restoring a nandroid I had....... restore seems to be working until it gets to "Restoring Cache..." Then it hangs and nothing happens.... sitting at this screen afraid to do a battery pull.....
Please HELP... what the hell did I do
****************UPDATE: Seem to have fixed the issue... Grabbed a flashable zip of CWM.... reinstalled CWM... Rebooted recovery... Am now able to flash superwipe and roms etc. Thank god. Seems to be working fine now
What recovery are you using? If you're using CWM 6xxx, you don't, and shouldn't, need to use the Darkside wipes! You only need to use that if you are on CWM 5.xxx, using it on a higher version causes issues, mainly with people who don't know proper manual wipe procedures.
Solution, change your recovery, do all your wipes, flash rom and reboot.
Edit, are you trying to use Cyanogen Mod?

[Q] Help unbricking soft bricked phone

Help
I have had my phone rooted for 3 months now so i decided to go to the next level and install a custom rom. I installed cynagenmod on my device via clock work mod.
Just to let you know i have CLOCKWORKMOD ASWELL
As i did it it installed correctly until i booted it and realized i was in a boot loop.
the cynagen mod would freeze half way through the boot.
I have tried odin but i'm not sure if i'm doing it wrong, is there any other software or things u can do. Is it possible to do it with clockwork mod, i had tried the update thing but it aborts and i can seem to get a rom that i can use that would help or is there a will load as a zip. is there any thing that you guys have done that unbricked ur wonder that you could share ?
Thank you for your time
just suggest., reboot to CWM and wipe data, wipe cache, and wipe dalvik cache.
if it can't solve the problem you should to flash custom ROM again via CWM and if it can't solve your problem again, just back to Stock.
Go to cwm
Wipe data
Wipe cache
Flash download zip custom rom
Flash gapps
And enjoy it

I flashed a rom and now my phone is just rebooting

I rooted my phone, downloaded the jedi mind trick rom and attempted to flash it. I deleted and format my phone in CWM and i installed the rom from an internal sdcard. Now it keeps resetting and wont turn on. What should I do now?
Have you tried jamison's cache wipe?
Sent from my HTC One using xda app-developers app
Im downloading the stock telus rom in an attempt just to start from the beginning. When I flash it I'll get back to you. I was rushing when I rooted it the first time I guess.
Okay so I've done that and have rooted it using the s2 toolkit. what steps should I take to ensure the jedi mind trick rom can be successfully flashed?
Okay I tried reflashing it again... Didn't work, I have the same problem. I did the factory settings, and wiped the cache and flashed the rom. I then went into advanced and cleared the Devac (sp) cache and fixed permissions. I rebooted and it didn't work. It starts, gets to about the loading circle graphic and just resets
I used Darkside super wipe and it worked for me...
ive done it like this.
flashed original stock rom via odin
Root via S2 toolkit
flash cmw with toolkit as above
and flash custom rom via s2 toolkit
and after that used darkside superwipe
thanks for the tip, I tried the darkside wipe but it still is happening.
I have the same exact thing. But for me it's different. It started with the PACman 22.0.1. Whenever I press the power button to turn on/off the screen, it would restart a couple of seconds later being stuck in an infinite reboot loop. Can't get into recovery mode (used TWRP 2.3.3.1 and 2.5). I somehow managed to revert back to stock which worked properly. Rooted and installed PACman 22.1.1 ROM and it's still stuck on a reboot loop.
I don't know if it's a hardware problem (wiring off power button to the circuit is damaged) or a software code that messed up the machine code in the circuit.
i had the same when i installed wrong kernel and radio...try it like this..instal stock
http://forum.xda-developers.com/showthread.php?t=1513359
and then try cwm recovery version from the s2 toolkit (try non touch ver.)
and then try flashing
try doing a factory reset, wipe cache and install rom. don't wipe cache or anything after that until after it boots. btw don't use cwm wipe cache, try the one that is stickied in development forum.

Categories

Resources