Develop Bugs

[Q] app2sd - Introduction

Hey guys!
As the title says, I would love an introduction to app2sd so i don't make any mistakes..
Frist i installed a script from Darktremor, but i showed out to be for Nexus1.
Therefore I installed another one, but deleted that again because suddenly i only had 2,7GB, when I i used to have 4GB..
Well now I have 3,7. therefore I don't think i have deleted one of them completely!
is there a way to delete it?
And also, what app2sd should i use? Please help, as I would like to get this solved so i just can enjoy my phone and the CM9 Bravo ROM
So this i the things I need to know:
Which app2sd shall i use?
Can I delete a script? If yes, how?
//velein
Sorry, if my english has some mistakes. I'm Danish.

velein said:
So this i the things I need to know:
Which app2sd shall i use?
Can I delete a script? If yes, how?
Click to expand...
Click to collapse
Which type of a2sd you use is dependant on the ROM you wish to install and the a2sd support provided by the ROM. If you wish to use the Bravo CM9 ROM, read the OP for that ROM. In this case is is referred to as Mounts2SD

ascot17 said:
Which type of a2sd you use is dependant on the ROM you wish to install and the a2sd support provided by the ROM. If you wish to use the Bravo CM9 ROM, read the OP for that ROM. In this case is is referred to as Mounts2SD
Click to expand...
Click to collapse
Thanks. Then how to I delete it? It that automatic?

velein said:
Thanks. Then how to I delete it? It that automatic?
Click to expand...
Click to collapse
Again, read the relevant para in the CM9 thread!
If you already have a different version installed, you really need to start with a full wipe before installing the ROM

ascot17 said:
Again, read the relevant para in the CM9 thread!
If you already have a different version installed, you really need to start with a full wipe before installing the ROM
Click to expand...
Click to collapse
Thanks!

[Q] Little prob. with TermaRomXX2

The rom runs good app2sd not working after flashin it starts in Hindi and the BasisbandVersion is not XXLA its my old,XXK3.Ideas?????Greeeeeeetz

CALIBAN666 said:
The rom runs good app2sd not working after flashin it starts in Hindi and the BasisbandVersion is not XXLA its my old,XXK3.Ideas?????Greeeeeeetz
Click to expand...
Click to collapse
also for me,.my baseband does not change,.but app2sd is working for me

iel0000 said:
also for me,.my baseband does not change,.but app2sd is working for me
Click to expand...
Click to collapse
you flashed the terma?over cwm>
and flashed the other thing over at odin?
app2sd working and i tdidnt change your baseband?

CALIBAN666 said:
The rom runs good app2sd not working after flashin it starts in Hindi and the BasisbandVersion is not XXLA its my old,XXK3.Ideas?????Greeeeeeetz
Click to expand...
Click to collapse
just follow the instructions,.and it would work,.

Custom ROMs created with dsixda android kitchen have patched kernels. However, the boot.img inside these ROMS need to be tar'ed and flashed thru odin in order for the kernel patches to work properly.
Just flash termagazis' termarom PDA file thru odin and your rom of choice to make features like init.d and a2sd work properly. Also do not forget to partition your sdcard with ext2 accordingly.
Sent from my GT-S5360 using xda premium

[Q] Qiss Rom

hi all,
kindly is there someone that is able to insert int2ext+ script in this rom? http://tw.qiss.mobi/download_software.php?mod=en#HTC
Thank you very much
edit: i tried already to flash them separatly (int2ext+, mount2sd, a2sd) anyone seems not working

The feck?
This ROM is ICS based? Just curious what base are they using.

k3lcior said:
The feck?
This ROM is ICS based? Just curious what base are they using.
Click to expand...
Click to collapse
I was wondering that too, probably based on some we already have here. I tried to search the site but its in some weird alien language
---------- Post added at 10:54 PM ---------- Previous post was at 10:53 PM ----------
On the other hand, have you tried flashing the script after flashing the rom? Could work :b
Nandroid first either way.

Well, correct me if i am wrong, but video recording is working great with this rom... much moree faster....

Seems to share some MIUI components. Tried it for a few seconds didn't like it

Maybe MIUI, but this is 30fps camcorder....

cirapfc said:
Maybe MIUI, but this is 30fps camcorder....
Click to expand...
Click to collapse
The build.prop says that this is 4.0.4, but that can easily be faked. What's the reported kernel version?

Guys,
based on CM9 and is really 4.0.4 ICS!!
someone that is able to insert some script for our Desire pls!

Well, its not k3, it is 2.6.38.8 cayniarb-ics-stock kernel... whatever, cam is better for me
Sent from my HTC Desire using xda app-developers app

I don't find any information about hboot...
Is that ROM compliant with cm7r2 hboot?
Thanks

harm007 said:
I don't find any information about hboot...
Is that ROM compliant with cm7r2 hboot?
Thanks
Click to expand...
Click to collapse
im on stock hboot and is working fine. no tested yet with other.

manup85cupra said:
im on stock hboot and is working fine. no tested yet with other.
Click to expand...
Click to collapse
cm7r2 not working, stock is fine

Does it have hwa? If not, the working camcorder is nothing new.
..

guggi4 said:
Does it have hwa? If not, the working camcorder is nothing new.
..
Click to expand...
Click to collapse
I'm just saying that video recording is not as chopy as in other ics roms...
Test it and write your opinion...
Sent from my HTC Desire using xda app-developers app

cirapfc said:
I'm just saying that video recording is not as chopy as in other ics roms...
Test it and write your opinion...
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
cirapfc have you found solution data2ext? for now im using TB to move them but is not enough

manup85cupra said:
cirapfc have you found solution data2ext? for now im using TB to move them but is not enough
Click to expand...
Click to collapse
Nop, tried just m2sd couple of times without succes....
Sent from my HTC Desire using xda app-developers app

Rom is laggy, after flashing shaky kernel much better, but still laggy.
Camcorder works like a charm for me, hw video decoding works.
Trying now flashing few libs from cm9 rom for smoothnes...
link2sd works, but low space.

zingga said:
Rom is laggy, after flashing shaky kernel much better, but still laggy.
Camcorder works like a charm for me, hw video decoding works.
Trying now flashing few libs from cm9 rom for smoothnes...
link2sd works, but low space.
Click to expand...
Click to collapse
i didnt see any lag, just lot of battery drain... but i will try this kernel... still searching someone that is able to insert data2ext script...
for language change: you should edit two build.prop line in the zip without extract the file:
ro.product.locale.language=zh
ro.product.locale.region=TW
example for italian:
ro.product.locale.language=it
ro.product.locale.region=IT
after this flash the rom and install morelocal2.
not sure if someone will get full rom language but at least is better

I'm testing this rom for 2 days, and i'm happy with it. I don't use any sd2ext scripts, since i use my phone only for calls, sms and gmaps.
Unfortunatly, the lockscreen is a bit laggy.

grusta said:
I'm testing this rom for 2 days, and i'm happy with it. I don't use any sd2ext scripts, since i use my phone only for calls, sms and gmaps.
Unfortunatly, the lockscreen is a bit laggy.
Click to expand...
Click to collapse
yes and i prefer that MIUI, but without a2sd scripts is unusable. i was asking to some developer if can help us:angel:

[Q] V6 Super Charger - EHNDROIX [OTA] 11.16.2012

Hi friends, could anyone tell me if script V6 Super Charger works on the 4.0.4 ROM EHNDROIX? Well I followed a tutorial and my phone crashed and had to reformat and reinstall everything again :crying:
sorry for bad english

rkdss said:
Hi friends, could anyone tell me if script V6 Super Charger works on the 4.0.4 ROM EHNDROIX? Well I followed a tutorial and my phone crashed and had to reformat and reinstall everything again :crying:
sorry for bad english
Click to expand...
Click to collapse
from what i read it cant be use with ICS and JB.ICS similiar with EHNDROIX?

afif_7070 said:
from what i read it cant be use with ICS and JB.ICS similiar with EHNDROIX?
Click to expand...
Click to collapse
Hi friend, this ROM is based on CyanogenMod9 ...... but from what I saw the script V6 is compatible or will get it wrong.

rkdss said:
Hi friend, this ROM is based on CyanogenMod9 ...... but from what I saw the script V6 is compatible or will get it wrong.
Click to expand...
Click to collapse
hv u tried reading from this link?sorry for my mistakes, it does compatible with ICS n JB..http://forum.xda-developers.com/showthread.php?t=991276

[Q] removing int2ext+

how do i remove int2ext+ completely from a rom having it integrated? i want to install another script like int2extv2+ or m2sd

yeahman45 said:
how do i remove int2ext+ completely from a rom having it integrated? i want to install another script like int2extv2+ or m2sd
Click to expand...
Click to collapse
scripts aint ur problem, the ICS rom is.
anyway, system/etc/init.d and remove int2ext script

jmcclue said:
scripts aint ur problem, the ICS rom is.
anyway, system/etc/init.d and remove int2ext script
Click to expand...
Click to collapse
ok thx! how do you know it's ics rom my problem?? Was using qiss rom ICS with no real a2sd script (using link2sd) and never had an issue

yeahman45 said:
ok thx! how do you know it's ics rom my problem?? Was using qiss rom ICS with no real a2sd script (using link2sd) and never had an issue
Click to expand...
Click to collapse
because there is no stable ICS rom. i used INT2EXT in loads of roms and never caused a problem.
i could be wrong tho, try removing it and see.

jmcclue said:
because there is no stable ICS rom. i used INT2EXT in loads of roms and never caused a problem.
i could be wrong tho, try removing it and see.
Click to expand...
Click to collapse
ok thx .. yup there's no stable ICS except qiss rom! try it you will see .. it's as stable as gingerbread. (try marius.a version)

yeahman45 said:
ok thx .. yup there's no stable ICS except qiss rom! try it you will see .. it's as stable as gingerbread. (try marius.a version)
Click to expand...
Click to collapse
i dont have a desire anymore, but i did try it and it looked good but thats bout it. but saying that im a sense fan so dont really bother with ICS/JB.

jmcclue said:
i dont have a desire anymore, but i did try it and it looked good but thats bout it. but saying that im a sense fan so dont really bother with ICS/JB.
Click to expand...
Click to collapse
oic.. i used to be a sense fan too especially for its widgets but now i have switched to ICS, i prefer stock ICS and widgets nowadays are as high quality as sense ones. (although i haven't tried sense > v3.0)
i have removed the int2ext script thx.. i am now using mount2sd.. hope i don't get any "can't wake up" issues anymore