my o2 pic messages dont work i have tried getting in touch with o2 but they are about as much use as a chocolate fire guard.
iss there an install file i cn use or anything available from htc?
wap works ok though
Can you post your APN settings? Settings, Mobile Network, Access Point Names, then click your APN, then Power + Home for screenshot
GSM & GPRS WAP
In order to resolve a customer's issue, it may be more beneficial to reset the APNs to the defaults before adding a new APN. Please use method one and if this fails, then resort to method 2.
Please note all steps must be completed to ensure the settings are correctly configured.
Method 1: Reset to Defaults
A customer can set the APN back to the default Pay Monthly OFPay & Go APN by following the steps below.
1. Tap the Applications key
2. Tap Settings
3. Tap Mobile network
4. Tap Access Point Names
5. Tap the 3 dots on the Top Right of the screen
6. Tap Reset to Default
7. Tap Access Point Name again
8. Select O2 Pay Monthly or O2 Pay and Go
9. Tap Access Point Name again
10. Tap the radio button beside the correct APN
Method 2: Entering an APN Manually
Please ensure that when entering O2 into the settings that the letter O is selected and not a zero.
When entering the following information do not press Save until told to in the instructions.
1. Tap the Applications key
2. Tap Settings
3. Tap Mobile network
4. Tap Access Point Names
5. Tap the 3 dots on the Top Right of the sceen
6. Tap New APN
7. Tap Name then tap the text box and enter O2 Pay Monthly then tap OK
8. Tap APN then tap the text box and enter wap.o2.co.uk then tap OK
9. Tap Proxy then tap the text box and enter 193.113.200.195 then tap OK
10. Tap Port then tap the text box and enter 8080 then tap OK
11. Tap Username then tap the text box and enter o2wap then tap OK
12. Tap Password then tap the text box and enter password then tap OK
13. Skip past Server as this is preset as Not set
14. Tap MMSC then tap the text box and enter http://mmsc.mms.o2.co.uk:8002 then tap OK
15. Tap MMS proxy then tap the text box and enter 193.113.200.195 then tap OK
16. Tap MMS port then tap the text box and enter 8080 then tap OK
17. Tap MCC then tap the text box and enter 234 then tap OK
18. Tap MNC then tap the text box and enter 10 then tap OK
19. Tap Authentication type and tap PAP
20. Tap APN type and type Internet + MMS
21. Press the 3 Dots on the Top Right of the screen
22. Tap Save
23. Tap the circle next to the new profile so a green dot appears in it
24. Press the Back key four times to return to the main menu.
Ensure your MMS port is set to 8080 first.
When creating a new apn when u get to the "APN type" part instead of putting Internet + mms try putting * instead, worked for me! If I put Internet + mms I didn't get a circle next to my new apn so couldn't choose it, but when I put * i did and it worked!
updated the rom reset to defaults its working again
doesnt send them if connected to wifi though
Related
Okay,
I got my P3600 yesterday, CID Unlocked it and have ran several rom's on it.
But I have noticed that the MMS Sending and Recieving facility does not work.
I have checked my settings with my Service Provider (O2 Ireland Contract)
And have used the Network Wizards that are on some ROM's to no avail.
Basically what happens is the MMS goes to 99% and then fails and stays in the Outbox and incoming MMS does not come in at all.
I have also upgrade to the 1.50 radio and this has not made a difference.
Is this a known issue, currently using the most recent Bepe rom so hopefully a solution can come up for this as it is a very nice and versatile rom.
same issue here on o2 ireland, mms with the same sim card in another phone works fine, but on the trinity it just stays in the outbox with the little clock in the top left corner of the message icon..tried 3 or 4 latest ROMs, even the official dopod 3600i ROM, same difference.
any help appreciated
At least I'm not on my own, thanks for the feedback dude
Network Wizard may have some configuration error.
For example MMS setting for WIND (ITA) are wrong, it uses for the gateway 212.245.244.1 but the correct one is 212.245.244.100.
Double check your MMS settings to see if there are some errors.
For cookers:
The file provision.zip can be modified, inside there are operator settings for various conuntry.
The password of the archive is 1234, modify the wrong entries, then repack and remember to reprotect the file with the same password (1234).
If anyone needs the correct entries give me a shout I have all the screen shots for WAP 2.0 and WAP 1.2 settings but the darn MMS dont work.
I am certain it is something very simple bu what is the mystery
I'm afraid I'll have to mirror you again here mate, settings are not the issue, tried every possible combination, old ones, new ones, old ones mixed with the new ones, etc....no joy...
I had a similar problem with an SP5 last year after a lot of fiddling I got it.
It seems to be not as straightfoward as I thought.
If anyone has a P3600 with working MMS for O2 Ireland can you post your settings here, it is most likely some straight port and IP combination
Actually has anyone here used MMS on any rom sucessfully especially on Irish Networks ?
Reply I got from HTC :
Wont work for me can you test :
The issue you are describing is not a knowing issue, please check the settings, this?is the settings for paying monthly.
MMS
Tap Start then Settings
Tap Connections, then Connections
Tap Advanced
Tap Select Networks
Tap the New... button under Programs that automatically connect to the internet should connect using
In the Enter a name for these settings field, enter?O2 MMS
Tap on the Modem tab and then tap the New. button
In the Enter a name for the connection field, enter?O2 MMS
In the Select a modem menu, select Cellular line (GPRS) or Cellular line (GPRS, 3G)
Tap Next
In the Access Point Name field, enter? wap.dol.ie and then tap next
In the Username field, enter?nothing
In the Password field, enter?nothing
Leave the Domain field empty.
Tap Finish
Tap the Proxy settings tab
Tick the This network connects to the internet box
Tick the This network uses a proxy server to connect to the internet box
Tap the Advanced button
Tap on HTTP
In the Server field, enter 62.40.32.40
In the Port field, enter?8080
Tap OK twice
In the Programs that automatically connect to the internet should connect using menu, select My ISP.
Tap OK
Tap Start
Tap Messaging
Tap Menu, Tools and then Options
Tap MMS
Tap the Servers tab
Tap the New button
In the Server name field, enter?O2
In the Gateway field, enter 62.40.32.40
In the Port number field, enter?8080
In the Server Address field, enter HYPERLINK "http://mmsc.mms.o2.ie:8002/"http://mmsc.mms.o2.ie:8002
In the Connect Via menu, select?O2 MMS
Set the Sending size limitation to the maximum available. (this may incur extra charges with your network. Consult your network for charges for large MMS messages)
In the WAP Version menu, select 2.0
Tap OK Three times
i have a excalibur s621 bought from suncom, which has new switched to t-mobile. my problem is i had to do a hard reset and lost my connection settings to suncom and my phone will not let me use t-mobiles settings. if anyone has the suncom settings please post them or e-mail me at [email protected]
This information was for a different model phone, but the pertinent information should still work.
Setting up the handset
1. On the handset, press Start.
2. Scroll to More… and press the Joystick.
3. Scroll to Settings and press the Joystick .
4. Scroll to More… and press the Joystick.
5. Scroll to Data Connections and press the Joystick.
6. Press Menu.
7. Scroll to Edit Connections and press the Joystick.
8. Scroll to GPRS Connections and press the Joystick.
9. Press Menu.
10. Scroll to Add and press the Joystick.
11. Scroll to Description and enter i-Net.
12. Scroll to Connects to and scroll horizontally to The Internet.
13. Scroll to Access point and enter mobileinternet.
14. Scroll to User name and enter . Otherwise leave this field blank.
15. Scroll to Password and enter . Otherwise leave this field blank.
16. Scroll to Primary DNS and enter . Otherwise leave this field blank.
17. Scroll to Secondary DNS and enter . Otherwise leave this field blank.
18. Press Done twice.
19. Scroll to Proxy Connections and press the Joystick.
20. Press Menu.
21. Scroll to Add and press the Joystick.
22. Scroll to Description and enter i-Net.
23. Scroll to Connects from and scroll horizontally to The Internet.
24. Scroll to Connects to and scroll horizontally to WAP Network.
25. Scroll to Proxy and enter 066.150.237.195.
26. Scroll to Type and scroll horizontally to WAP .
27. Press Done three times.
28. Scroll to WAP connection and scroll horizontally to i-Net.
29. Press Done twice.
30. Press Home to return to the main screen.
The new WAP profile is now configured and ready for use.
Finished
I-Notes Plus Configurator
Setting up the data account
1. On the handset, press Start.
2. Scroll to More… and press the Joystick.
3. Scroll to Settings and press the Joystick .
4. Scroll to More… and press the Joystick.
5. Scroll to Data Connections and press the Joystick.
6. Press Menu.
7. Scroll to Edit Connections and press the Joystick.
8. Scroll to GPRS Connections and press the Joystick.
9. Press Menu.
10. Scroll to Add and press the Joystick.
11. Scroll to Description and enter Suncom MMS.
12. Scroll to Connects to and scroll horizontally to The Internet.
13. Scroll to Access point and enter mms.
14. Scroll to User name and enter . Otherwise leave this field blank.
15. Scroll to Password and enter . Otherwise leave this field blank.
16. Press Done three times.
17. Scroll to Internet connection and scroll horizontally to Suncom MMS.
18. Press Done.
19. Press Home to return to the main screen.
Setting up the MMS profile
1. On the handset, press Start.
2. Scroll to More… and press the Joystick.
3. Scroll to More… and press the Joystick.
4. Scroll to Configurations and press the Joystick.
5. Scroll to MMS Settings and press the Joystick.
6. Scroll to Connect Via and scroll horizontally to The Internet.
7. Press Menu.
8. Scroll to MMSC Settings and press the Joystick.
9. Press Menu.
10. Scroll to New and press the Joystick.
11. Scroll to Name and enter Suncom MMS.
12. Scroll to MMSC URL and enter http://mms.suncom.net:8088/mms.
13. Scroll to WAP Gateway and enter 066.150.033.115.
14. Scroll to Port and enter 9201 or Permanent, non-secure.
15. Press Done.
16. Scroll to Suncom MMS and press Menu.
17. Scroll to Set as Default and press the Joystick .
18. Press the Home button to return to the main screen.
The handset is now configured for Multimedia Messages.
Finished
Data connections for MPx220 With 1.43 firmware:
1. Start, Settings, Data Connections.
2. Internet connection scroll to Suncom MMS.
3. Wap connection scroll to i-Net.
4. Wap Proxy scroll to i-Net.
5. Press Done 2 times.
6. Press Home.
Finished
In IE:
1. Menu, options, connections.
2. Unmark automatically.
3. Select network scroll to The Internet.
4. Done 2 times.
Just stuck this in the wiki as well.
By the way, welcome to T-Mobile. I know SunCom was a powerhouse in the Carolinas. My mom in Charleston made the transition with them from TDMA to GSM and now to T-Mobile and their service seems to be getting better for her. Hope you have the same story.
Can anyone advise me of the correct APN settings to get an o2 iPhone Simplicity sim working in my Desire?
I've got data working fine, just no MMS.
Unfortunately I do only have the settings for Germany - however, as I was facing the same issue like you, I contacted the O2 support via phone. And within a couple of minutes I received a mail from O2 with the correct settings (no general ones, specific for the Desire) including a detailed description. Maybe the UK support is working the same way...
@sonderschalter: can you share with us your operator settings? Maybe we can modify them with our operator settings and make MMS work
Here are my UK settings (although note that my sim wasn't originally Simplicity, I justed downgraded to a Simplicity contract):
Name: O2 MOBILE WEB
APN: mobile.02.co.uk
Proxy: Not Set
Port: Not Set
Username: O2web
Password:
Server: Not Set
MMSC: Not Set
MMS Proxy: Not Set
MMS Port: Not Set
MMS Protocol: WAP 2.0
MCC: 234
MNC: 10
Authentication Type: Not Set
APN Type: default
Hope that helps!
Thanks everyone. In the end I called o2 and they emailed me this, which has sorted my problem:
Thank you for your recent handset enquiry regarding handset settings. Please find your settings details below.
GPRS WAP & MMS
Please note all steps must be completed to ensure the settings are correctly configured.
Please ensure that when entering O2 into the settings that the letter O is selected and not a zero.
When entering the following information do not press Save until told to in the instructions.
1. Press the Menu key
2. Tap Settings
3. Tap Wireless & networks
4. Tap Mobile networks
5. Tap Access Point Names
6. Press the Menu key
7. Tap New APN
8. Tap Name then tap the text box and enter O2 Pay Monthly MMS then tap OK
9. Tap APN then tap the text box and enter wap.o2.co.uk then tap OK
10. Tap Proxy then tap the text box and enter 193.113.200.195 then tap OK
11. Tap Port then tap the text box and enter 8080 then tap OK
12. Tap Username then tap the text box and enter o2wap then tap OK
13. Tap Password then tap the text box and enter password then tap OK
14. Skip past Server as this is preset as Not set
15. Tap MMSC then tap the text box and enter http://mmsc.mms.o2.co.uk:8002 then tap OK
16. Tap MMS proxy then tap the text box and enter 193.113.200.195 then tap OK
17. Tap MMS port then tap the text box and enter 8080 then tap OK
18. Tap MCC then tap the text box and enter 234 then tap OK
19. Tap MNC then tap the text box and enter 10 then tap OK
20. Press the Menu key
21. Tap Save
22. Tap your new account so a green dot appears next to it
23. Press the Back key four times to return to the standby screen.
i went into the o2 shop to get either a iphone or blackberry simplicity im to use in my desire hoping i could change the apn's etc. was told that blackerry one wouldnt work as it uses completly different servers and the iphone would work but i'd run the risk of being disconnected for breach of t&c's.
have you tried to use wifi in any of the open zones ?
Further to what I said earlier, although the settings o2 gave me worked, they did not allow streaming for some reason.
I found some different settings that allowed data and streaming media, but MMS didn't work.
After hunting around the net and trying all combinations of APN settings that I could find (including have two sets of APNS one for MMS & one for data), I have come to the conclusion that the iPhone Simplicity plan will not allow streaming and MMS at the same time.
I've now cancelled that contract within the 14 day period allowed, and taken out an o2 Simplicity for Smartphone contract instead. Hopefully this will allow me to do what I want easily... will update here with the results.
Using a O2 SIMplicity SIM - Web & MMS Settings
--------------------------------------------------------------------------------
Right after far too much messing around I have managed to get the settings to work!!!
This guide is based on a HTC Magic that has been unlocked and rooted and is now running a O2 SIM card.
You will need to set up 2 x APNs on the handset.
First one is for your mobile internet. Remember that if you do not have the unlimited web bolt on then this will start to get very expensive for you! You need to enter this information in. If there is nothing written for a paticular field then just leave it blank.
Mobile Web:
Name: o2
APN: mobile.o2.co.uk
Username: web
Password: web
MCC: 234
MNC: 10
MMS:
Name: MMS
APN: wap.o2.co.uk
Username: o2wap
Password: password
Server: http://mmsc.mms.o2.co.uk:8002
MMSC: http://mmsc.mms.o2.co.uk:8002
MMS Proxy: 193.113.200.195
MMS Port: 8080
MCC: 243
MNC: 10
Now once these two seperate APN's have been entered and you have made sure you saved them you should see a grey circle next to each one. Click on the MMS circle and it should now have a green light inside it.
Re-Boot the handset.
You should now have mobile internet and MMS capabilities
Just remember that these are the settings that worked for me on my HTC Magic unlocked and used with a O2 SIMplicity card with a unlimited web bolt on. Make sure you have a data package otherwise your phone bills will be massive! If in doubt check with O2 to make sure your not being charged for the data etc. I cannot be held responsible!
At last
Nice one Bridgstfer,these are the only settings that worked for me on o2.I have a desire rooted on pay monthly contract, one thing is you have to wait awhile.When I first tried to send mms with these settings it didnt work tried later and everything was fine.I will bookmark this page because I'm always installing new roms.
If you switched over to Red Pocket mobile on the Prime...here's some apn settings for you...work for me..
On the device, tap Apps icon > Settings > (More... >) Mobile networks > Access Point Names.
Create a new Access point (tap Menu icon > New APN) and input the values listed below: -
Name : RP-inet
APN : att.mvno
Enter the user name and password listed below. If no value is listed, leave the field blank.
Username:
Password:
Set the APN type as default.
Save the APN and, if necessary, select Access Point Names and tap the radio button next to RP-inet to set the profile as default.
Return to the home screen.
Ready to use
i have tried these settings but, my galaxy nexus still won't connect to the web. i have the capitol H for the haspa+ but, keep getting a "page is not available" error when i try to surf the web. i even tried the old apn settings where you name the apn Red Pocket but it doesn't work either. these settings worked on my atrix but, not this phone. any idea about what could be going on??
Im sure I read on the CM10 Official Thread that some ppl where having problems with the mms.
Like wise so did I.
But got these setting to finally work.
1.Press the Menu key
2.Tap Settings
3.Tap Wireless & networks
4.Tap Mobile networks
5.Tap Access Point Names
6.Press the Menu key
7.Tap New APN
8.Tap Name then tap the text box and enter O2 Pay & Go MMS then tap OK
9.Tap APN then tap the text box and enter payandgo.o2.co.uk then tap OK
10.Tap Proxy then tap the text box and enter 193.113.200.195 then tap OK
11.Tap Port then tap the text box and enter 8080 then tap OK
12.Tap Username then tap the text box and enter payandgo then tap OK
13.Tap Password then tap the text box and enter password then tap OK
14.Skip past Server as this is preset as Not set
15.Tap MMSC then tap the text box and enter http://mmsc.mms.o2.co.uk:8002 then tap OK
16.Tap MMS proxy then tap the text box and enter 193.113.200.195 then tap OK
17.Tap MMS port then tap the text box and enter 8080 then tap OK
18.Tap MCC then tap the text box and enter 234 then tap OK
19.Tap MNC then tap the text box and enter 10 then tap OK
20.Tap Authentication type then tap PAP
21.Tap APN type and enter the * symbol
22.Tap the Menu key
23.Tap Save
Maybe be of some use to some one.