Develop Bugs

Phone Pad Vibrate

Edited an old cab to remove the version limits. It now works on Wm6.
Install and then dial a number from the standard phone dial pad to test! You should feel a short vibrate when you tap a number button letting you know that it's been tapped.
Add it to your CAB file collection.
Cheerio
Howard

What exactly does this do, with Phone Pad? Sounds interesting

It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...

YUP! When you go to the dial screen and tap a number a small vibrate lets you know that a button has been pressed.
I'm also using bunches of SPB programs, but I still get the Vibrate from the standard dial screen.
Cheerio
Howard

sinmae said:
It vibrates shortly each time, you press number in dial pad... or I guess, coz it did not work on my TyTN
but mayby is problem with some SPB products, because I have lot of them installed in my TyTN... e.g. phone suite, which can manipulate automatically with sound, vibration and light according to profile settings...
Click to expand...
Click to collapse
It works on my Hermes but you have to long-press the key. Press for at least a half second to get the vibrate motor spinning.
Also, be sure to set either "short" or "long" tones in the phone options. It won't do anything if set to "none."

Hey thanks for converting to WM6 I had been missing it for awhile now!

Any chance this will work in WM5? Please and thanks.

Yeah this is soooooooooooo useful tip man, thanks a lot !!^^

Uninstall Issues...
I liked the idea, just didn't like the fact that you have to push the button for so long to get hte vibrate to react, just a fraction longer and it turns into a speed dial. So let's talk about the uninstall....
I unstalled the app, everything went normal. Now I have no keypadd tones at all.
hshortt, can you provide a fix or provide the registry keys that this install/uninstall modified?
EDIT: Nevermind, fixed on my own...

Works with the HTC Touch / Vouge. Just had to do a soft reset twice. For some reason after the first time, the touch screen stopped responding.

I'd like to know what you did to get your keyapd tones back, this program sucks!!!

chibull17 said:
I'd like to know what you did to get your keyapd tones back, this program sucks!!!
Click to expand...
Click to collapse
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...

smittyofdhs said:
Here is the solution I ended up putting together.
http://forum.xda-developers.com/showthread.php?t=353295
there's a download and some instructions down in the post...
Click to expand...
Click to collapse
guys i have tried the solution in the above link, it didnt work out.
if i exported the registry files from a non screwd device, and exported to my mine... will it work out?

This program is not very effective, cause when I tap out a phone number naturally I tap it quickly, and you have to hold for at least 300ms (I reckon) for it to even do a little vibrate.
it somehow needs to be much more sensitive, lower ms or something. Maybe its a limitation of the whole vibrate mechanism in the phone anyway.
Oh well.

Lost All Sounds
after installing i lost all sound output from my back speaker
no music, no ringtones, nothing
it only made my phone pad vibrate but screwed up all other sound output
tried to uninstall & still no fix
also hard reset & gflashing ROM again didnt fix
did it screw up my device completely !!!!!!!!!!
any fix please???

Vibrate dial pad
Thank you ! This is just what I was looking for

Sorry.Didn't find how to delete message

Hi pretty neat program, until I found a better one TouchResponse... This one allows you to even select the vibration time, and it vibrates on every tap on your touch screen. Well the problem is I un-installed Phone Pad Vibrate and now the the sound is gone when I press a phone number. The link for the fix isn't working, so how do I fix it so I can get the sound back???

Did the link for removal instructions get moved/removed for this?
The link from above is still broken. Anyone have instructions on how to remove this app?

could someone upload it on rapidshare, because i can´t load it, thank you

Quick Tilt 2 Question !

Hi,
I have a Tilt 2 with stock ROM. The only two enhancements I use is "S2U2" and "Advanced Configuration Tool" ! I changed someting and now have a little problem :
When I get an incoming call and the caller id with the pic pops up, I can't pickup the call, using the green on-sceen button. This button does NOT pickup the phone call. I have to use the green hardware button to pickup the incoming call. However, I can use the RED on-screen button to end the call.
I soft reset the phone a few times and tried some settings with the "S2U2 and Advanced Config. Tool", but I can't get it to work.
Any ideas ?
I'd appreciate any help and suggestions.
Thanks,
JCE

same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-

jerzey_devil said:
same thing is happening to me, neither the onscreen slide, or the hard button work..
can't wait for an answer -_-
i lurk this forum here and there, and i still don't understand anything...at all -_-
Click to expand...
Click to collapse
Haha, it takes time to understand all the jargon and such that takes place around here. Just do some reading and searching, don't be afraid to ask questions if you can't find a thread explaining it. Eventually I would suggest flashing to a good rom like one of the Energy Rom's or a Cell Rom. The two best Rom Cooks on the Rhodium (Touch Pro 2/Tilt 2) side of xda.

I say the same thing as doublen1, use a non-stock ROM because these come with features already installed and you will be able to use S2U2 and all that stuff. and about the actual issue, I have had problems picking up calls with the screen, so I just started using the hardware keys.

Make sure you didn't mess around with any of the touch screen settings in Adv. Configr or BSB tweaks or something like that. This usually causes the problem with the dialer.

Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE

jce2005 said:
Hi AllTheWay,
well, I don't remember changing anything in the "Advanced Config. Tools" which would cause the touch screen settings to be different. However, I might have done or changed something...... Is there a way to get the "Touch Screen" settings to a default level without hard resetting the device ?
Thank you.
JCE
Click to expand...
Click to collapse
Not that I know of off the top of my head. There might be a setting inside of Adv Config that would allow you to restore to default. Also the S2U2 has a setting to take control as the dialer screen when somebody calls. You can try messing around with the settings in S2U2 as well.
PM me if you don't find an answer soon.

[Q] Able to Disable Call Connect Screen Flash?

Hi,
There's a feature on the HTC Desire and maybe other Android phones that flashes the screen when a call is connecting/connected; This for me is a nuisance, as for example, I want to give a mis-call to someone, by the time I find where the 'end call' button is they already holded it lol, as the screen constantly flashes. So...I was wondering if anyone knows how to disable this or atleast tweak it and share your tricks.
Much Appreciated.
Deeco.

Synergy lock screen Question

Ok, I did a search several times and each time I came up with like 4,000 posts to read.
Is there a way to modify the apps shown on the buttons on that screen? I love that they are there, and I use 2 of the 3. I use phone and Mail, but I do not use the default Messenger, I use Hancent, and I dont use the camera from this screen and would like to replace that.
Thanks,
Doug

Yup. Go to personalize > lockscreen, and them choose which lockscreen. In there, there is a settings button for the apps
Sent from my PC36100 using XDA App

OMG! THANK YOU. I feel like a dumb piece of crap. It was staring me right in the face and I did not see it.
thanks again.
I dont have a thank you button showing anywhere on the forum.

Dammmmmiiitttt... That Makes 2 of us. thanks.

also if you use a launcher other than sense ie launcher pro or adw, you have to make sure you switch back to sense before you can change the icons.

I've searched. I thhought I had this set up before but it may have been on another rom. Is there a way to keep my phone to going to the lock screen when it is plugged in? Thanks in advance.

Also, any apps you want on the lockscreen need to be on internal memory, they blank out if they're on sd.

Rather then start a new thread, I will ask my issue here since it is for Synergy, and a lock screen issue. Is there a way to lock the screen while on a phone call? I use a BT headset, usually answer the call from the headset and leave my phone in pocket. Problem in the phone unlocks when the BT headset answers the call, and funny things can happen to the phone while sliding around in my pocket while I work. Not to mention the battery life is decreased since the screen is on.
A related question, on Froyo somehow I could have the phone set to answer to the headset if I used the headset to take the call, or if I answered from the phone it would switch to the phone for speaker/mic. Any suggestions how to set that on this ROM?
Thanks in advance for any suggestions!

Incoming call screen unresponsive- Missed calls

So this has been happening sporadically over the last few weeks. I get a call, try to slide the answer button to the center to answer it, and other than feeling the haptic feedback, there is nothing responding. Turning off the screen did not help. Neither did trying to ignore button. When the screen comes up as a tap to answer, that works, but the slide one sometimes fails. Anyone else having this issue? Any ideas?

This is still happening on my device. As well as the pop-out, fly-out whatever you call them, menus that pop out from the side of an app with the 3 lines..those are becoming unresponsive and requiring a reboot. I can't seem to narrow down the cause. Still looking for any help on this.