Develop Bugs

Any way to keep screen off all the time until top power button pressed?

More than half the time I take my phone out of it's case in my pocket to check texts or call somebody, it's always on and eating battery. Alot of the time I have the phone in vibrate or silent because I can't have it going off most of the day, and whenever I get any kind of notification the screen comes on (text, alarm, call, ect.), and then the screen ends up staying on because it's constantly being bumped and never has the time to shut itself down.
Is there any way I can make the screen stay off at ALL times (except on an incoming call), and ONLY come on when I press the unlock/power button on the top of the phone?
I have a TMobile TP2 and I'm running the Nov. 19th, Photon Energy ROM. Upgrading to the Nov. 27th version when it's done downloading but I don't think that will fix the problem as I've changed ROMs before. Thanks to any help.

you will find that when in the case it should be off, on taking the phone out of the case (i assume the HTC one that came with the phone?)
the magnet in the case triggers the keyboard sensor which turns the screen on.
otherwise, you can change the display time out in power options under settings.
Cheers
Steve

That's interesting, I've heard about the case doing that but never thought about it. Would you recommend any cheap cases, or is there a specific magnet location I should be careful of? And do you know if there is a way to keep the screen off when I get a text message for example?

There is a way to fix this... it is to disable "Wake on Slide." I have done this and no more problems.
Here is a link to what to do:
http://forum.xda-developers.com/showpost.php?p=2945249&postcount=3
Hope it helps you, as it did me.

Thanks for the reply and I appreciate the help, but I don't really have a problem with the wake on keyboard slide, it seems that if the phone is in my pocket locked, and I get a text message, the screen comes on to notify me that I have a text message. Then, it's usually being bumped around in my pocket and since the touch screen is usable with any object, it will stay on because something will tap it in my pocket. The phone then heats up over time and drains battery. I want to find a way to keep the screen off at all times unless, I either receive a call, or push the power button. Thanks.

illusion of progress said:
Thanks for the reply and I appreciate the help, but I don't really have a problem with the wake on keyboard slide, it seems that if the phone is in my pocket locked, and I get a text message, the screen comes on to notify me that I have a text message. Then, it's usually being bumped around in my pocket and since the touch screen is usable with any object, it will stay on because something will tap it in my pocket. The phone then heats up over time and drains battery. I want to find a way to keep the screen off at all times unless, I either receive a call, or push the power button. Thanks.
Click to expand...
Click to collapse
Try:
go to HKLM\Drivers\BuiltIn\RIL
change DisableSMSWakeUpEvent to 1 (0 will wake up the device)
On my Rhodium, it does not wake up by default. I hear the notification, but my screen remains dark
Or try this cab file ... soft reset after install

Thanks for the .cab, I'm restarting now to see if it fixes the problem. Kind of random, but I might as well ask here before starting a new thread. I started using Mobile Shell instead of TF3D and so far I love it, but when setting a wallpaper, the wallpapers that I would normally use in TF3D, (480x800), it makes me select or crop out part of the photo to use as a background in Mobile Shell. I can't tell if it actually gets blurry (I would think so, because it's stretching the picture), but does anyone know why it wants me to only use a certain portion of the background instead of just setting the entire picture? Thanks,

More than likely, the version of Mobile Shell you have is either not designed for WVGA or there is a setting somewhere in there that allows you to change it and you haven't found it yet.
Am not a expert on mobile Shell, but according to their website, the latest version (3.5) does support WVGA.
Another option is to, if you have Adobe Photo shop or something similar, scale down the entire picture to the size it reccomends.
Otherwise, if you have a version earlier then 3.5, maybe you could upgrade and see if it makes any difference.

[Q] TouchLockPro or PocketShield Impressions

Anyone using TouchLockPro or PocketShield?
What are your impressions, pros/cons?
Thanks

Touch lock pro is really good but i removed it because some major features weren't working, maybe its just the ROM i used. But its great!

I was using s2u2, but kept having issues, probably has more to do that I don't use a stock rom, versus the program, but I switched to pocket shield and have no issues with it. I don't use all the features, just mainly the screen lock.

p51d007 said:
I was using s2u2, but kept having issues, probably has more to do that I don't use a stock rom, versus the program, but I switched to pocket shield and have no issues with it. I don't use all the features, just mainly the screen lock.
Click to expand...
Click to collapse
hmm good to know...I was about to ask about S2U2 too...it looks great...but I was reading the threads on it and it seams like issue after issue that people are talking about...maybe just the users/roms/or devices...idk

I downloaded the trial version of Pocket Shield...which you can use for 10 days before having to buy it.
Noticed some issues...probably things that just I would notice ...
(1) It enables the ability to select Repeat...under settings>Sounds&Notifications>Notifications>Reminders [I thought this was great...since this feature disappeared after WM 2003]
(2) in the same area...under Voicemail, Missed Call, and Text Messages you can now enable "flash light"...although these options are no available for New MMS...or ...New E-mail...or Reminders
(3) When Reminders go off...the light flashes anyways...until you dismiss or snooze... [I thought this was annoying cause I usually associate LEDS with missed e-mail, text, voicemail, not reminders...]
(4) You have some boost alarm options....where you can choose snooze options....this is basically an alarm to tell you have unchecked e-mail, text, voicemail, reminders etc... BUT the SNOOZE options don't actually work...this seams to never stop...just keeps going and going...even after the reminders and all missed calls are answered :x Edit:OK, so apparently...when this alarm goes off on the lock screen...you click on the item on the lock screen, then slide the screen...where the snooze options are revealed! yaay! ...but no dismiss button :X Ok, figured this out. For Boost alarm options you have a time setting for when you want it to work, plus you can check what you want it to work for, mine kept going off because I had it checked to go off as long as there was something on "today & tomorrow's Agenda" haha oops
(5) After a call...the screen locks...even if this feature is turned off on pocketshield...
(6) strange thing...i think is a feature of pocket shield...that we can't control...the phone screen turns off when you hold the phone up to your ear...even if the feature..."protect screen during call" is off....sortof like the iphone proximity sensor...not sure if our phone already did this...but I don't remember it doing this...before....
...if anyone knows that this is a normal feature...and how to turn it off...that would be great...
(7) For some dumb reason...the TouchFlo3D Slide to Unlock Screen is gone again....and it has defaulted back to the old WM Unlock...if I hold End key down....yaay! (sarcasm) ...this happened strangly the other day too...without this program...and I had to hard reset to get it back :x
(8) No clue why...but after a call...the phone decided to vibrate without stopping...until I pulled out the battery....when i turned it back on ...it went back to vibrating...but stopped after it finished booting...no clue why this happened...but it only took place once...wasn't a reoccurring problem
maybe this is all happening because it isn't the full version...idk...I thought it would be full...just minus access to the skins and it would just disable in 10 days...but idk...
This is all on my stock Rom too....which is nuts

Another annoyance...when you hit the power button...it turns of any media player you had running...so you can't turn the screen of and play music at the same time...unless plugged into external power.
I found that I can turn the screen off...and keep the media player running if I push the PocketSheild Lock button...this gives you the option to turn the screen off...or go to the lock screen...which will turn the screen off too and keep the media player running.
Major annoyance...should just be able to hit the power button and have the screen turn off and lock...with the media player still playing...what if I want to save battery by turning my screen off while listening to music...or put the phone in my pocket with headphones...

StrangeShadow said:
hmm good to know...I was about to ask about S2U2 too...it looks great...but I was reading the threads on it and it seams like issue after issue that people are talking about...maybe just the users/roms/or devices...idk
Click to expand...
Click to collapse
Yeah, I don't fault S2U2, it's a good program. I hear from a lot of people that use it and like it, but I was having issues. It's funny to show iPhone drones the S2U2 lock screen with the battery showing (the default iPhone screen?), and they say "hey, when did you get an iPhone" swipe it unlocked, and they say you can't have iphone on a windows phone LOL....priceless.

p51d007 said:
Yeah, I don't fault S2U2, it's a good program. I hear from a lot of people that use it and like it, but I was having issues. It's funny to show iPhone drones the S2U2 lock screen with the battery showing (the default iPhone screen?), and they say "hey, when did you get an iPhone" swipe it unlocked, and they say you can't have iphone on a windows phone LOL....priceless.
Click to expand...
Click to collapse
at least people don't mistake your phone with a nokia,
it's driving me crazy

I used TouchLockPro for a long while. Generally, I like it. I locks well and the unlock with light feature is great.
Recently, the unlock with light feature was added to PhoneAlarm. I use and like PhoneAlarm, so I just updated and now have a single program with my alarm profiles and screeen locking plus a slide to unlock. Handy.

[Q] Workaround for vertical swipe - answer/reject call

I've had a good search and this problem's come up quite a few times but I haven't found a working solution. To answer/reject calls the Desire requires a vertical swipe. This obviously causes problems when removing from a pocket. First off an F- for HTC in Product Design. You should test your products before producing them!
Ok, so what is the best solution? I don't understand the technology well, so I'm not looking for any complicated solutions - ideally I'd like a tested app. Can anyone recommend one from experience? Otherwise can anyone recommend another solution, other than orientating or holding the phone a certain way? Everyone's obviously in the same boat here. Thanks.

It's a capacitive screen.
You shouldn't be sliding the screen even if the screen slides against your pants. Don't put your fingers on the screen when taking it out.
It's the simple answer you don't want, but you're probably not finding any other results because it is that simple.
Slide to answer is similar to slide to unlock however, so you might have more luck finding workarounds that change the unlock mechanism and see if they happen to mention ways to change slide to answer.

Mr Playdo said:
I've had a good search and this problem's come up quite a few times but I haven't found a working solution. To answer/reject calls the Desire requires a vertical swipe. This obviously causes problems when removing from a pocket. First off an F- for HTC in Product Design. You should test your products before producing them!
Ok, so what is the best solution? I don't understand the technology well, so I'm not looking for any complicated solutions - ideally I'd like a tested app. Can anyone recommend one from experience? Otherwise can anyone recommend another solution, other than orientating or holding the phone a certain way? Everyone's obviously in the same boat here. Thanks.
Click to expand...
Click to collapse
When I used Sense ROM (switch to Oxygen some time ago) I used WidgetLocker with the option to hide an incoming call activated. I basically added an vanilla style slider (slide to right to unlock) over HTC's slide down to answer.
Is not a perfect solution because
- the program it's not free
- you have to swipe twice (once to right, once down) to answer a call
But it saved me a lot of trouble with answering too soon or rejecting calls
You could also try Incoming Call Plus, I didn't had the chance.

Alegis said:
It's a capacitive screen.
You shouldn't be sliding the screen even if the screen slides against your pants. Don't put your fingers on the screen when taking it out.
It's the simple answer you don't want, but you're probably not finding any other results because it is that simple.
Click to expand...
Click to collapse
I hope for mankind's sake that you are not a designer. Ps it occurs too when removing it from a slide-in case, where my fingers have no connection with the screen.
@dboy - is it simple a matter of installing an app and then you have 'slide right to unlock' and it won't install anything else on the phone?
Has anyone tested Incoming Call Plus?

Mr Playdo said:
....
@dboy - is it simple a matter of installing an app and then you have 'slide right to unlock' and it won't install anything else on the phone?
...
Click to expand...
Click to collapse
You install the apk and you get an alternative lockscreen that, among others, features slide right to unlocked on incoming call.
It has many other options: place any widget on lock screen, unlock by trackpad, custom sliders, show/hide notification bar, allow/disallow interactions on lock screen
Like any other market purchase you have 15 minute to decide if you want to keep it or click refund.
I use Lookout to make sure no malware lands on my phone, and so far I had no problems, it only changes my lockscreen.

Mr Playdo said:
I hope for mankind's sake that you are not a designer.
Click to expand...
Click to collapse
You give me too much credit, kind sir.
Mr Playdo said:
Ps it occurs too when removing it from a slide-in case, where my fingers have no connection with the screen.
Click to expand...
Click to collapse
Not with mine. So you're saying HTC design gets an F- for not testing the product with your particular conductive (there's your problem) case in your particular situation? That seems rather blunt.
If you don't want to try out Incoming Call Plus/whatever you could replace your case with a nonconductive one.

You can solve it with WidgetLocker as someone already told you.
Before widgetlocker I also saw sometimes that the Sense slider moved when I took the phone out of my pocket or my slide-in case, but never as far as it would accept the call.
Now I am using WidgetLocker with Sense slider but it does not use this vertical swype to accept calls. Does anyone know if there is an option to activate it? I would like to use the vertical swype in combination with WidgetLocker.
Thanks

chrismast said:
....
Now I am using WidgetLocker with Sense slider but it does not use this vertical swype to accept calls. Does anyone know if there is an option to activate it? I would like to use the vertical swype in combination with WidgetLocker.
Thanks
Click to expand...
Click to collapse
WidgetLocker -> Menu -> Settings -> Popups -> Hide Incoming Call.
If check it should hide the vertical slide beneath a horizontal one. Uncheked it should show only the vertical slide.

dboy0911 said:
WidgetLocker -> Menu -> Settings -> Popups -> Hide Incoming Call.
If check it should hide the vertical slide beneath a horizontal one. Uncheked it should show only the vertical slide.
Click to expand...
Click to collapse
If I check it, WidgetLocker hides the call and I have to unlock first, then get the screen with the green and red button to accept/reject the call. If i leave it unchecked this screen will pop over the widgetlocker slider. But its both not what I want . I would like to have the slider (that you can slide down for accept and up for reject) poping up when someone is calling me. Is this possible in WidgetLocker or not? Cannot find any option to activate it, just got the normal slider but without this function.

chrismast said:
If I check it, WidgetLocker hides the call and I have to unlock first, then get the screen with the green and red button to accept/reject the call. If i leave it unchecked this screen will pop over the widgetlocker slider. But its both not what I want . I would like to have the slider (that you can slide down for accept and up for reject) poping up when someone is calling me. Is this possible in WidgetLocker or not? Cannot find any option to activate it, just got the normal slider but without this function.
Click to expand...
Click to collapse
Can you check if Behavior -> Show in Call is checked?

dboy0911 said:
Can you check if Behavior -> Show in Call is checked?
Click to expand...
Click to collapse
nope its not.

i am searhcing for the same answer..an ideea anyone?

If you're having problems with pocket answering calls, try this app. I've asked the developer to add some sort of incoming call protection, which he did. It works great for me. Before answering/rejecting a call, you have to short-press a precise software button. There's no way it can be pressed while in the pocket.
Later Edit: The feature is also be present in the free version, so try that one first.

[Q] Unintentionally rejecting a call

Hi,
Sometimes, when my DHD is in my pocket and it rings, I take it out of my pocket and, Unintentionally, rejecting the call (it seems that I am touching the screen).
Any idea how to stop it from happen?

Hi, I use Call Confirm App as I used to have the same problem, thankfully not anymore now.

What is the name of the apps?
Thanks

Call Confirm App

I installed it but it is good only for outgoing calls.
I need an app for incoming calls.

Oops sorry about that still haven't got rid of my hangover yet.
Only other thing I can suggest is get a leather-ish flip case.
I use one I got off the "bay" and it does the job OK.
Del.

Thanks.
No app?

I have exactly the same problem.
If you like, you can check my theme here: http://forum.xda-developers.com/showthread.php?t=911474 and especially its last post... but I havent found any "full" solution yet.

I have the same problem too.. :/ The only solution so far is to pull it out from the pocket very carefully without touching the screen. That just annoys the hell out of me.

I believe this will solve your problem. It's in the market and it allows you to delay button presses, to prevent accidental rejections. Check it out.
http://www.appbrain.com/app/easy-answer-button-free/org.nsd.easyanswer
Via the XDA app for the HTC Inspire

you have several options, but unfortunely none of them are great! =oP
this "slide" is a part of htc framework, so it can't be changed (if you wanna stay with sense)
so, when i'm with sense i prefer widget locker, it's a really great app, "solve" this problem by put a unlock screen over the original one (so, you pick out the pocket, unlock the phone/widget locker, see who is calling and slide up/down to answer/deny, basicaly you need to unlock you phone twice)
other idea is simply disable the lock screen and use widget locker to unlock the phone, the idea is:
- Disabling lockscreen you will get a incoming call with no slider, it will be replaced by that simple two buttons "answer" and "decline" (the same you got when the phone rings and you are using it)
- when lockscreen is disabled, the screen goes off, but any key turn it on again, so, you use widget locker to solve it, and let the option "over the original answer/deny call" ticked (but it won't stay over anything, because lockscreen is disabled)
you can also try http://www.appbrain.com/app/proximity-screen-off/com.itsme4ucz.screenoff
that app has a option that let your phone with screen off when it is in your pocket, using proximity sensor.
regards

my screen goes blank.. but the call is still pending sometimes.

[Q] Disable Lock screen "no signal" widget?

Hi guys,
First time android user here. I've had a search on google and on this forum and I can't seem to find an answer to this so:
The HOX displays music controls in a widget when the lock screen is activated. However when there is no signal (such as when I am underground) this is replaced by a gigantic "no signal!" notification.
This is really annoying as it means I then have to go through the password screen and switch to the player before being able to switch track.
Is there any way to disable this notification? I mean, I can see there's no signal right there in the top corner...
Thanks in advance.

Bump
The lock screen player is amazingly buggy.
The controls often fail to work, and when there is no signal that "no signal!" message will often randomly switch back and forth with playback controls entirely unpredictably. I've come to the conclusion that this is a bug so hopefully there'll be a fix soon.
It's disappointing to see how rough around the edges a lot of the sense stuff is. It has very good intentions but frankly if this is supposed to be HTC's answer to iOS it's got a looooong way to go.

FodT said:
It's disappointing to see how rough around the edges a lot of the sense stuff is. It has very good intentions but frankly if this is supposed to be HTC's answer to iOS it's got a looooong way to go.
Click to expand...
Click to collapse
iOS doesn't even do anything, thats why it appears to work. theres no actual functions to get buggered up in the first place.

Thanks, but that doesn't actually help me with my phone. If you haven't noticed I bought an android device, not an iPhone.

FodT said:
Hi guys,
First time android user here. I've had a search on google and on this forum and I can't seem to find an answer to this so:
The HOX displays music controls in a widget when the lock screen is activated. However when there is no signal (such as when I am underground) this is replaced by a gigantic "no signal!" notification.
This is really annoying as it means I then have to go through the password screen and switch to the player before being able to switch track.
Is there any way to disable this notification? I mean, I can see there's no signal right there in the top corner...
Thanks in advance.
Click to expand...
Click to collapse
one way i got round this is by pressing power button a couple more times to get the controls back on the lock screen when screen switched on again. might work for you too. still better than going through password etc.
but i agree not clever from htc. it's things like these which make products well tested and thought through.