Develop Bugs

[REQ] Lock the 4 touch sensitive buttons during incoming call

I've been looking for a good app that would lock the 4 buttons on an incoming call and do nothing else, but so far I have been unsuccessful. All the apps that are capable of doing this usually come with several strings attached, one of which is usually a whole new interface for the dialer.
What I am looking for is simple - when a call is incoming I want the 4 keys to be locked, but the screen to remain unlocked, so I can use the slide to answer part of the dialer.
Does such an app exist or if it doesn't, would somebody with the appropriate skills be able to write one?

LockMeLite 1.3 does this. Only other thing except that is it locks the screen when you wake up the phone, so it is not so 'heavy' application like s2u2 for example.

Thanks, but I was aware of LockMeLite. And as stated in the first post, this app forces screen locking on me. If I was able to disable the screenlock and keep the button lock during call active I'd be a happy camper.

Well, you can disable screenlock on incoming call, and if screenlock on power button press is so much of an issue for you... maybe if you ask the developer kindly, he will disable this feature just for you (or in the next version)

WhO_KnOwS said:
I've been looking for a good app that would lock the 4 buttons on an incoming call and do nothing else, but so far I have been unsuccessful. All the apps that are capable of doing this usually come with several strings attached, one of which is usually a whole new interface for the dialer.
What I am looking for is simple - when a call is incoming I want the 4 keys to be locked, but the screen to remain unlocked, so I can use the slide to answer part of the dialer.
Does such an app exist or if it doesn't, would somebody with the appropriate skills be able to write one?
Click to expand...
Click to collapse
I was hoping for that kind of program too The best so far is AE button and put call/hangup on double tab. Wish someone could make a prog just to disable buttons on incoming call

I'm looking for this kind of app too !!!

tkolev said:
LockMeLite 1.3 does this. Only other thing except that is it locks the screen when you wake up the phone, so it is not so 'heavy' application like s2u2 for example.
Click to expand...
Click to collapse
I think during conversation, the keys became unlock. It only lock when you have an incoming call and before you pick up that call.

Try TouchLockPro (link in sig). Version 2.6 is the first release which is usable on the HD as the sole locking utility. It is very configurable, so I think you'll achieve what you want.

Phone answers itself when removing from pocket

I keep my desire in my shirt pocket with screen facing my body. The problem is touch screen seems to work through my shirt, so when the phone is ringing the motion of me removing the phone pulls down on the lock and answers the phone.
Is there anything that can be done to reduce the screen sensitivity so it doesn't work through my shirt touching my skin.
Thanks

Yeah have the screen facing outwards LOL.

put it in a case for protection too like the pdair pouch or the sena ultra slim pouch

stitch a layer of thick material e.g. denim, onto the inside of your shirt pocket

Dude, its android (freedom). Change your lockscreen to something else
I think the app is called lockboot.
It should give you the option of default android lock, or iphone lookalike lock, or a few others...
Anything that unlocks with a side swipe instead of a down swipe should fix your problem.
Regards -e
edit****
Sorry mate, i was a bit quick. Only one "o"; "Lockbot". I havent tried it yet though, but since it changes the lockscreen i assume it changes your answer swipe too...

I don't like having the screen facing outwards so that's a no no.
The thing is I like the default lock screen and didn't want to make my phone look like a iphone copy, was hoping I could reduce the sensitivity of the touch screen.
I will look at some other lock screens hopefully there are some that don't look too iphoneish
Thanks

I totally agree with the iphone unlock being ugly, but I do think the default android lock is nice, and it has a right angle swipe...
Dunno about the sensitivity change, reckon that might affect the whole phone. But someone here in the forum can probably offer some advice. Good luck.

so you have you phone in your shirt pocket, when you pull it out it unlocks, so you have the phone bottom down.
if you put it bottom up then when you pull it out of your pocket the touch will make it slide from bottom to top which will not unlock it right? there is your solution.
+ there is the possibility of making the "phone pull out motion" very cool when you pull it out with the bottom up.

supasye said:
so you have you phone in your shirt pocket, when you pull it out it unlocks, so you have the phone bottom down.
if you put it bottom up then when you pull it out of your pocket the touch will make it slide from bottom to top which will not unlock it right? there is your solution.
+ there is the possibility of making the "phone pull out motion" very cool when you pull it out with the bottom up.
Click to expand...
Click to collapse
That would probably trigger automatically setting the phone to busy and disconnecting the call or forwarding to voice mail, I think that's what sliding up on the lock screen does.

How about dont put it in your shirt pocket?

hungabunga said:
I don't like having the screen facing outwards so that's a no no.
The thing is I like the default lock screen and didn't want to make my phone look like a iphone copy, was hoping I could reduce the sensitivity of the touch screen.
I will look at some other lock screens hopefully there are some that don't look too iphoneish
Thanks
Click to expand...
Click to collapse
LockBot have many lockscreens, iPhones, Nexus One, Eris, .. you can even make your own customized lockscreen in that program, pretty nice, have a go at it, its worth it

EroThraX said:
That would probably trigger automatically setting the phone to busy and disconnecting the call or forwarding to voice mail, I think that's what sliding up on the lock screen does.
Click to expand...
Click to collapse
Thats right, this way i have cancelled 4 out of 5 recent phone calls.
The default screen unlock in the Desire is the most stupid i've ever seen. If you put your phone upwards in your pocket, you answer all calls by grabbing your phone from your pocket, if you put it in upside down, you cancel the call automatically.
If only 1 engineer at HTC called another with the phone in his pocket, they would have noticed this. It's 'HTC quietly stupid' on this one. I have installed Lock 2.0 for now, but will keep looking for a better solution.

Can't turn it upside-down as it will then reject the call. will give the lock app a go later tonight.
pwhooftman if you find a good lock app then please let me know.
thanks
Sully
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk

just installed lockbot, well work the few pounds and now have flan style unlock which requires a more precision touch to unlock.
Sully

Having recieved a call while using lockbot I still have the same problem.
When using lockbot and you recieve a call the phone unlocks itself and I see the slide to answer desire screen which was my initial problem.
It looks like I need to replace the slide to answer bit rathe rthan the locking sceen.
Can somebody who has lockbot confirm that you still get the slide to answer even with lockbot in use.
Thanks

hungabunga said:
Having recieved a call while using lockbot I still have the same problem.
When using lockbot and you recieve a call the phone unlocks itself and I see the slide to answer desire screen which was my initial problem.
It looks like I need to replace the slide to answer bit rathe rthan the locking sceen.
Can somebody who has lockbot confirm that you still get the slide to answer even with lockbot in use.
Thanks
Click to expand...
Click to collapse
I had the same experience. Lock 2.0 gives me a iphone like left to right slider for unlocking. When i receive a call , i get the (traditional) green "answer" and red "Deny" buttons. So no unlock slider when receiving a call, but onscreen buttons which are far less accidentally pressed.

No Lock
I had this preoccupation also and installed the No Lock app. This way I also get the green/red buttons.

I gave up on lockbot as the phone would not fully go to sleep mode, I could wake it pressing any key.
Gone back to the standard lock screen for now and I just take the phone out of my pocket very carefully.
Sully

Im switch from WinMo to Desire and Im very angry because my every call when I take phone from case(case which came with TyTnII and phone is horizontal position) is droped. Im prety shure that I do not touch screen with finger on hand, because I take phone on top and bottom and take it out from case.
This is realy annoying...

I've sent HTC an e-mail to, at least, make this problem known. Maybe they will put an anti-pocket screen lock in next firmwares.
I've used the No Lock app to disable lock. Unfortunately it possible to wake the phone by pressing any key.
Is there any application that disables screenlock but locks the keys (besides power, off course)?

[Q] TouchLockPro or PocketShield Impressions

Anyone using TouchLockPro or PocketShield?
What are your impressions, pros/cons?
Thanks

Touch lock pro is really good but i removed it because some major features weren't working, maybe its just the ROM i used. But its great!

I was using s2u2, but kept having issues, probably has more to do that I don't use a stock rom, versus the program, but I switched to pocket shield and have no issues with it. I don't use all the features, just mainly the screen lock.

p51d007 said:
I was using s2u2, but kept having issues, probably has more to do that I don't use a stock rom, versus the program, but I switched to pocket shield and have no issues with it. I don't use all the features, just mainly the screen lock.
Click to expand...
Click to collapse
hmm good to know...I was about to ask about S2U2 too...it looks great...but I was reading the threads on it and it seams like issue after issue that people are talking about...maybe just the users/roms/or devices...idk

I downloaded the trial version of Pocket Shield...which you can use for 10 days before having to buy it.
Noticed some issues...probably things that just I would notice ...
(1) It enables the ability to select Repeat...under settings>Sounds&Notifications>Notifications>Reminders [I thought this was great...since this feature disappeared after WM 2003]
(2) in the same area...under Voicemail, Missed Call, and Text Messages you can now enable "flash light"...although these options are no available for New MMS...or ...New E-mail...or Reminders
(3) When Reminders go off...the light flashes anyways...until you dismiss or snooze... [I thought this was annoying cause I usually associate LEDS with missed e-mail, text, voicemail, not reminders...]
(4) You have some boost alarm options....where you can choose snooze options....this is basically an alarm to tell you have unchecked e-mail, text, voicemail, reminders etc... BUT the SNOOZE options don't actually work...this seams to never stop...just keeps going and going...even after the reminders and all missed calls are answered :x Edit:OK, so apparently...when this alarm goes off on the lock screen...you click on the item on the lock screen, then slide the screen...where the snooze options are revealed! yaay! ...but no dismiss button :X Ok, figured this out. For Boost alarm options you have a time setting for when you want it to work, plus you can check what you want it to work for, mine kept going off because I had it checked to go off as long as there was something on "today & tomorrow's Agenda" haha oops
(5) After a call...the screen locks...even if this feature is turned off on pocketshield...
(6) strange thing...i think is a feature of pocket shield...that we can't control...the phone screen turns off when you hold the phone up to your ear...even if the feature..."protect screen during call" is off....sortof like the iphone proximity sensor...not sure if our phone already did this...but I don't remember it doing this...before....
...if anyone knows that this is a normal feature...and how to turn it off...that would be great...
(7) For some dumb reason...the TouchFlo3D Slide to Unlock Screen is gone again....and it has defaulted back to the old WM Unlock...if I hold End key down....yaay! (sarcasm) ...this happened strangly the other day too...without this program...and I had to hard reset to get it back :x
(8) No clue why...but after a call...the phone decided to vibrate without stopping...until I pulled out the battery....when i turned it back on ...it went back to vibrating...but stopped after it finished booting...no clue why this happened...but it only took place once...wasn't a reoccurring problem
maybe this is all happening because it isn't the full version...idk...I thought it would be full...just minus access to the skins and it would just disable in 10 days...but idk...
This is all on my stock Rom too....which is nuts

Another annoyance...when you hit the power button...it turns of any media player you had running...so you can't turn the screen of and play music at the same time...unless plugged into external power.
I found that I can turn the screen off...and keep the media player running if I push the PocketSheild Lock button...this gives you the option to turn the screen off...or go to the lock screen...which will turn the screen off too and keep the media player running.
Major annoyance...should just be able to hit the power button and have the screen turn off and lock...with the media player still playing...what if I want to save battery by turning my screen off while listening to music...or put the phone in my pocket with headphones...

StrangeShadow said:
hmm good to know...I was about to ask about S2U2 too...it looks great...but I was reading the threads on it and it seams like issue after issue that people are talking about...maybe just the users/roms/or devices...idk
Click to expand...
Click to collapse
Yeah, I don't fault S2U2, it's a good program. I hear from a lot of people that use it and like it, but I was having issues. It's funny to show iPhone drones the S2U2 lock screen with the battery showing (the default iPhone screen?), and they say "hey, when did you get an iPhone" swipe it unlocked, and they say you can't have iphone on a windows phone LOL....priceless.

p51d007 said:
Yeah, I don't fault S2U2, it's a good program. I hear from a lot of people that use it and like it, but I was having issues. It's funny to show iPhone drones the S2U2 lock screen with the battery showing (the default iPhone screen?), and they say "hey, when did you get an iPhone" swipe it unlocked, and they say you can't have iphone on a windows phone LOL....priceless.
Click to expand...
Click to collapse
at least people don't mistake your phone with a nokia,
it's driving me crazy

I used TouchLockPro for a long while. Generally, I like it. I locks well and the unlock with light feature is great.
Recently, the unlock with light feature was added to PhoneAlarm. I use and like PhoneAlarm, so I just updated and now have a single program with my alarm profiles and screeen locking plus a slide to unlock. Handy.

[Q] Workaround for vertical swipe - answer/reject call

I've had a good search and this problem's come up quite a few times but I haven't found a working solution. To answer/reject calls the Desire requires a vertical swipe. This obviously causes problems when removing from a pocket. First off an F- for HTC in Product Design. You should test your products before producing them!
Ok, so what is the best solution? I don't understand the technology well, so I'm not looking for any complicated solutions - ideally I'd like a tested app. Can anyone recommend one from experience? Otherwise can anyone recommend another solution, other than orientating or holding the phone a certain way? Everyone's obviously in the same boat here. Thanks.

It's a capacitive screen.
You shouldn't be sliding the screen even if the screen slides against your pants. Don't put your fingers on the screen when taking it out.
It's the simple answer you don't want, but you're probably not finding any other results because it is that simple.
Slide to answer is similar to slide to unlock however, so you might have more luck finding workarounds that change the unlock mechanism and see if they happen to mention ways to change slide to answer.

Mr Playdo said:
I've had a good search and this problem's come up quite a few times but I haven't found a working solution. To answer/reject calls the Desire requires a vertical swipe. This obviously causes problems when removing from a pocket. First off an F- for HTC in Product Design. You should test your products before producing them!
Ok, so what is the best solution? I don't understand the technology well, so I'm not looking for any complicated solutions - ideally I'd like a tested app. Can anyone recommend one from experience? Otherwise can anyone recommend another solution, other than orientating or holding the phone a certain way? Everyone's obviously in the same boat here. Thanks.
Click to expand...
Click to collapse
When I used Sense ROM (switch to Oxygen some time ago) I used WidgetLocker with the option to hide an incoming call activated. I basically added an vanilla style slider (slide to right to unlock) over HTC's slide down to answer.
Is not a perfect solution because
- the program it's not free
- you have to swipe twice (once to right, once down) to answer a call
But it saved me a lot of trouble with answering too soon or rejecting calls
You could also try Incoming Call Plus, I didn't had the chance.

Alegis said:
It's a capacitive screen.
You shouldn't be sliding the screen even if the screen slides against your pants. Don't put your fingers on the screen when taking it out.
It's the simple answer you don't want, but you're probably not finding any other results because it is that simple.
Click to expand...
Click to collapse
I hope for mankind's sake that you are not a designer. Ps it occurs too when removing it from a slide-in case, where my fingers have no connection with the screen.
@dboy - is it simple a matter of installing an app and then you have 'slide right to unlock' and it won't install anything else on the phone?
Has anyone tested Incoming Call Plus?

Mr Playdo said:
....
@dboy - is it simple a matter of installing an app and then you have 'slide right to unlock' and it won't install anything else on the phone?
...
Click to expand...
Click to collapse
You install the apk and you get an alternative lockscreen that, among others, features slide right to unlocked on incoming call.
It has many other options: place any widget on lock screen, unlock by trackpad, custom sliders, show/hide notification bar, allow/disallow interactions on lock screen
Like any other market purchase you have 15 minute to decide if you want to keep it or click refund.
I use Lookout to make sure no malware lands on my phone, and so far I had no problems, it only changes my lockscreen.

Mr Playdo said:
I hope for mankind's sake that you are not a designer.
Click to expand...
Click to collapse
You give me too much credit, kind sir.
Mr Playdo said:
Ps it occurs too when removing it from a slide-in case, where my fingers have no connection with the screen.
Click to expand...
Click to collapse
Not with mine. So you're saying HTC design gets an F- for not testing the product with your particular conductive (there's your problem) case in your particular situation? That seems rather blunt.
If you don't want to try out Incoming Call Plus/whatever you could replace your case with a nonconductive one.

You can solve it with WidgetLocker as someone already told you.
Before widgetlocker I also saw sometimes that the Sense slider moved when I took the phone out of my pocket or my slide-in case, but never as far as it would accept the call.
Now I am using WidgetLocker with Sense slider but it does not use this vertical swype to accept calls. Does anyone know if there is an option to activate it? I would like to use the vertical swype in combination with WidgetLocker.
Thanks

chrismast said:
....
Now I am using WidgetLocker with Sense slider but it does not use this vertical swype to accept calls. Does anyone know if there is an option to activate it? I would like to use the vertical swype in combination with WidgetLocker.
Thanks
Click to expand...
Click to collapse
WidgetLocker -> Menu -> Settings -> Popups -> Hide Incoming Call.
If check it should hide the vertical slide beneath a horizontal one. Uncheked it should show only the vertical slide.

dboy0911 said:
WidgetLocker -> Menu -> Settings -> Popups -> Hide Incoming Call.
If check it should hide the vertical slide beneath a horizontal one. Uncheked it should show only the vertical slide.
Click to expand...
Click to collapse
If I check it, WidgetLocker hides the call and I have to unlock first, then get the screen with the green and red button to accept/reject the call. If i leave it unchecked this screen will pop over the widgetlocker slider. But its both not what I want . I would like to have the slider (that you can slide down for accept and up for reject) poping up when someone is calling me. Is this possible in WidgetLocker or not? Cannot find any option to activate it, just got the normal slider but without this function.

chrismast said:
If I check it, WidgetLocker hides the call and I have to unlock first, then get the screen with the green and red button to accept/reject the call. If i leave it unchecked this screen will pop over the widgetlocker slider. But its both not what I want . I would like to have the slider (that you can slide down for accept and up for reject) poping up when someone is calling me. Is this possible in WidgetLocker or not? Cannot find any option to activate it, just got the normal slider but without this function.
Click to expand...
Click to collapse
Can you check if Behavior -> Show in Call is checked?

dboy0911 said:
Can you check if Behavior -> Show in Call is checked?
Click to expand...
Click to collapse
nope its not.

i am searhcing for the same answer..an ideea anyone?

If you're having problems with pocket answering calls, try this app. I've asked the developer to add some sort of incoming call protection, which he did. It works great for me. Before answering/rejecting a call, you have to short-press a precise software button. There's no way it can be pressed while in the pocket.
Later Edit: The feature is also be present in the free version, so try that one first.

[Q] Screen black after screen unlock

I've noticed that sometimes when I unlock my device I have a black screen with only the "multi-task" button and the status bar visible. It will stay like this until I "lock" the phone and unlock it again. Touching the "multi-task" button makes the rest of the buttons appear but touching them still doesn't make the screen respond. I have noticed this on both stock and custom rom. Has anyone else had this problem? Any ideas on a fix or cause?
I am using the Virgin/Bell Canada GSM version.
Thanks
ps. I've posted a pic to give people an idea of what I'm getting....as it may seem unclear in my explanation.

At first this sounded similar to a problem I had.. I installed Wave Launcher, which for some reason did not play well with my phone. I would unlock the screen and the screen would immediately go black as if it had shut off, but I could still push buttons and receive haptic feedback. I had to have someone call me and delete the app while I was in the call.. it sounds kind of similar but not really.. my first guess would be some sort of problem with an app being incompatible.

joshnichols189 said:
At first this sounded similar to a problem I had.. I installed Wave Launcher, which for some reason did not play well with my phone. I would unlock the screen and the screen would immediately go black as if it had shut off, but I could still push buttons and receive haptic feedback. I had to have someone call me and delete the app while I was in the call.. it sounds kind of similar but not really.. my first guess would be some sort of problem with an app being incompatible.
Click to expand...
Click to collapse
I wanted to pass this on...I was reading in the Team Kang rom that there is a "bugfix version: app navigation menu icons no longer disappear after unlocking phone". So I hope this is what relates to my problem and has been "fixed"!