Hey!
So i bought a used nexus which has yakju.
It got 4.0.2 and it says "You should upgrade you system to 4.0.4" and when i start the installation it reboots. Then i get a android symbol that has like a blue thing in it's stomach and is standing up.
But when it gets to maybe 10-15 % he goes more far away and lays down with a big red thing over his stomach and then i have to plug my battery out to start it again.When i look for a new system update it says my system is up to date, but it still says 4.0.2.
I'm not really sure what to do, so hopefully somebody can help me.
Thanks in advance.
You aren't completely stock. Read this for more info: http://forum.xda-developers.com/showthread.php?t=1419170
El Daddy said:
You aren't completely stock. Read this for more info: http://forum.xda-developers.com/showthread.php?t=1419170
Click to expand...
Click to collapse
So i guess i should use this method? Cause i got a unlocked bootloader.
Method 2 - Stock recovery installed, Unlocked bootloader
Correct. Coming from 4.0.2 you should use the yakju IMM76I from ICL53F OTA
If I were you, I'd flash an insecure boot image, then CWM and just flash that way, or via Odin (Odin is the n00b-friendliest)
familyguy59 said:
If I were you, I'd flash an insecure boot image, then CWM and just flash that way, or via Odin (Odin is the n00b-friendliest)
Click to expand...
Click to collapse
Not sure what you are trying to suggest, but the OP wants to upgrade his ROM to 4.0.4, not flash a new/clean 4.0.4 ROM. Flashing an insecure boot image will cause the update to fail.
Sent from my Galaxy Nexus using Tapatalk 2
Hey guys, I have my SGN here in flashed with the stock rom. Everything is stock but the recovery. I need stock recovery to update to 4.1 jellybean. I'm always getting these annoying messages on my phone telling me to update my phone. I tried downloading with the clockwork recovery but it just crashes and i get an error. I'm begging someone to show me a step by step way to flash stock recovery on galaxy nexus. Please and thank you!!!!
Dsertlu said:
Hey guys, I have my SGN here in flashed with the stock rom. Everything is stock but the recovery. I need stock recovery to update to 4.1 jellybean. I'm always getting these annoying messages on my phone telling me to update my phone. I tried downloading with the clockwork recovery but it just crashes and i get an error. I'm begging someone to show me a step by step way to flash stock recovery on galaxy nexus. Please and thank you!!!!
Click to expand...
Click to collapse
What version of Android are you on? If you are on yakju IMM76I, you can flash this stock recovery.
I am a n00b.
Just today I changed my phone from yakjuux to yakju, and it all seemed to go smoothly.
I am receiving texts, and everything seems to be working, and when I was trying to update to jelly bean OTA, everything was going well, until a little red triangle popped up over the little android, and my phone restarted with no change. I flashed my original radio image (UGLA4) so Im not sure whats up with that. If anyone has any suggestions about how I can fix this it would be greatly appreciated.
If not, I would like to restore my phone to yakjuux using a backup I made using this website: http://forum.xda-developers.com/showpost.php?p=21266325&postcount=239 as a guide. I have all the files saved onto my laptop, but Im unsure about how to use them and restore my phone to its original state (yakjuux)
Many thanks
lechickenwing said:
I am a n00b.
Just today I changed my phone from yakjuux to yakju, and it all seemed to go smoothly.
I am receiving texts, and everything seems to be working, and when I was trying to update to jelly bean OTA, everything was going well, until a little red triangle popped up over the little android, and my phone restarted with no change. I flashed my original radio image (UGLA4) so Im not sure whats up with that. If anyone has any suggestions about how I can fix this it would be greatly appreciated.
If not, I would like to restore my phone to yakjuux using a backup I made using this website: http://forum.xda-developers.com/showpost.php?p=21266325&postcount=239 as a guide. I have all the files saved onto my laptop, but Im unsure about how to use them and restore my phone to its original state (yakjuux)
Many thanks
Click to expand...
Click to collapse
You are seeing the little red triangle because you have an image that is not stock. You need to do the optional steps to get the ota (i.e., you need to flash the bootloader, radio and recovery). Go back to the convert to yakju guide and do them.
P.S. why did you not flash the JB images instead of the ICS images??
Sent from my Galaxy Nexus using Tapatalk 2
thanks
efrant said:
You are seeing the little red triangle because you have an image that is not stock. You need to do the optional steps to get the ota (i.e., you need to flash the bootloader, radio and recovery). Go back to the convert to yakju guide and do them.
P.S. why did you not flash the JB images instead of the ICS images??
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I flashed the bootloader, radio and recovery(I probably should have mentioned that in my initial post). Do I need to download a new image to flash onto my device? And how can I tell if its stock? I got my factory image from the link from your guide.
Im not sure why I didnt flash the JB images... I'll blame it on my n00bery.
Redoing
lechickenwing said:
I flashed the bootloader, radio and recovery(I probably should have mentioned that in my initial post). Do I need to download a new image to flash onto my device? And how can I tell if its stock? I got my factory image from the link from your guide.
Im not sure why I didnt flash the JB images... I'll blame it on my n00bery.
Click to expand...
Click to collapse
Will there be any problems if I follow all the steps in your guide, and pretty much redo everything? I would flash the bootloader, flash the same radio (UGLA4), flash the data paritition, flash the system partition, flash the kernel and flash the recovery the only difference being that I would use the JB image rather than the ICS image.
Thanks again
lechickenwing said:
Will there be any problems if I follow all the steps in your guide, and pretty much redo everything? I would flash the bootloader, flash the same radio (UGLA4), flash the data paritition, flash the system partition, flash the kernel and flash the recovery the only difference being that I would use the JB image rather than the ICS image.
Thanks again
Click to expand...
Click to collapse
There will be no issues. Note that if you flash the UGLA4 radio, the next OTA update will not install. You will need to flash the XXLF1 radio before attempting to install the next OTA update. (That is probably why you are seeing the red triangle -- the OTA is expecting to see the XXLA2 radio, and it is seeing the UGLA4. If you want the update to JB to install, just flash the XXLA2 radio, and the update will install.)
radio
efrant said:
There will be no issues. Note that if you flash the UGLA4 radio, the next OTA update will not install. You will need to flash the XXLF1 radio before attempting to install the next OTA update. (That is probably why you are seeing the red triangle -- the OTA is expecting to see the XXLA2 radio, and it is seeing the UGLA4. If you want the update to JB to install, just flash the XXLA2 radio, and the update will install.)
Click to expand...
Click to collapse
Im worried about not flashing the original radio... Im with wind mobile, and I heard that ugla4 is designed to fix roaming issues with winds service. If I switch the radio to xxla2, Im worried that I might get some of these roaming issues and a rather expensive bill.... thoughts?
lechickenwing said:
Im worried about not flashing the original radio... Im with wind mobile, and I heard that ugla4 is designed to fix roaming issues with winds service. If I switch the radio to xxla2, Im worried that I might get some of these roaming issues and a rather expensive bill.... thoughts?
Click to expand...
Click to collapse
Flash the XXLA2, install the update, then flash back your UGLA4 if you feel it necessary...
Sent from my Galaxy Nexus using Tapatalk 2
efrant said:
Flash the XXLA2, install the update, then flash back your UGLA4 if you feel it necessary...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
After updating to JB, I got prompted to update the OS to 4.1.2 and tried the OTA. For some reason it worked even though i wasn't using the corresponding stock radio image, and now I'm being prompted to do another OTA update (4.2.1). Seeing as the OTA worked last time, I tried to do it once more with the 4.2.1. update, but i ran into the same problem as last time: a little red triangle appeared over the little green android. So I did what you suggested, and flashed the xxla02 radio, and then tried to install the OTA but the little red triangle appeared again. So my question is; are there new corresponding stock boot, radio, and recovery images for JZO54K? If so, i probably still have the boot, radio, and recovery images that were stock to JRO03C.
I figure that if i flash the new stock boot radio and recovery images, the OTA should go smoothly. Any thoughts? Or should I just manually flash the 4.2.1 update that i can download from the google developers website ?
lechickenwing said:
After updating to JB, I got prompted to update the OS to 4.1.2 and tried the OTA. For some reason it worked even though i wasn't using the corresponding stock radio image, and now I'm being prompted to do another OTA update (4.2.1). Seeing as the OTA worked last time, I tried to do it once more with the 4.2.1. update, but i ran into the same problem as last time: a little red triangle appeared over the little green android. So I did what you suggested, and flashed the xxla02 radio, and then tried to install the OTA but the little red triangle appeared again. So my question is; are there new corresponding stock boot, radio, and recovery images for JZO54K? If so, i probably still have the boot, radio, and recovery images that were stock to JRO03C.
I figure that if i flash the new stock boot radio and recovery images, the OTA should go smoothly. Any thoughts? Or should I just manually flash the 4.2.1 update that i can download from the google developers website ?
Click to expand...
Click to collapse
Not all updates will update the radio or boot images, but some will. If you are on 4.1.2, for future updates to work, including 4.2.1, you need the boot, recovery and Radio images from 4.1.2.
Sent from my Galaxy Nexus using Tapatalk 2
efrant said:
Not all updates will update the radio or boot images, but some will. If you are on 4.1.2, for future updates to work, including 4.2.1, you need the boot, recovery and Radio images from 4.1.2.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Thanks efrant, youre a legend. Do you by chance know what the stock radio image for 4.1.2 is? And the boot and recovery images can be downloaded from the google developers web site right?
lechickenwing said:
Thanks efrant, youre a legend. Do you by chance know what the stock radio image for 4.1.2 is? And the boot and recovery images can be downloaded from the google developers web site right?
Click to expand...
Click to collapse
I think it is xxlf1. Go to randomphantasmagoria.com. Oldblue910 has mirrored all the old factory images there.
Sent from my Galaxy Nexus using Tapatalk 2
Hi,
I originally changed from yakujuux to yakuju in order to get from 4.0.1 to 4.0.4 a while ago.
Now I'm trying to upgrade from 4.0.4 to 4.2. I am currently yakuju builld IMM76I. I tried doing an incremental update through CWM and I got an error. I think it's because of the different radios right?
So what would be the best route to fix this? Should I change build's back and downgrade? I also tried installing the official stock ROM but that didn't work either.
Any ideas?
Going through some folders I just saw one of a build backup when I changed it before.
How do I use this backup?
These are the files I have...http://i12.photobucket.com/albums/a210/ruckus17/scrnsht.png
footclan said:
Hi,
I originally changed from yakujuux to yakuju in order to get from 4.0.1 to 4.0.4 a while ago.
Now I'm trying to upgrade from 4.0.4 to 4.2. I am currently yakuju builld IMM76I. I tried doing an incremental update through CWM and I got an error. I think it's because of the different radios right?
So what would be the best route to fix this? Should I change build's back and downgrade? I also tried installing the official stock ROM but that didn't work either.
Any ideas?
Click to expand...
Click to collapse
you can't update from 4.0.4 to 4.2.1 through ota
through ota: http://forum.xda-developers.com/showthread.php?t=1419170
through official nexus factory images/fastboot: http://forum.xda-developers.com/showthread.php?t=1626895
When trying the incremental updates, I had downloaded the files and ran them through CWM, not actually through OTA.
I tried the google factory image through CWM and also through the Gnex toolkit, again with no luck.
I have the system update notification on my phone, but everytime it goes to install the update, it fails and displays the android logo with a red triangle in his chest.
Like I said, all I did before, was unlock the phone and change from yakujuux to yakuju to obtain 4.0.4 without root. So that's all I can really think of why it isn't installing any updates. My Gnex is now rooted and unlocked.
footclan said:
When trying the incremental updates, I had downloaded the files and ran them through CWM, not actually through OTA.
I tried the google factory image through CWM and also through the Gnex toolkit, again with no luck.
I have the system update notification on my phone, but everytime it goes to install the update, it fails and displays the android logo with a red triangle in his chest.
Like I said, all I did before, was unlock the phone and change from yakujuux to yakuju to obtain 4.0.4 without root. So that's all I can really think of why it isn't installing any updates. My Gnex is now rooted and unlocked.
Click to expand...
Click to collapse
like I said!
through official nexus factory images/fastboot: http://forum.xda-developers.com/showthread.php?t=1626895
who said anything about cwm or a toolkit???
I had meant I had tried with the toolkit and CWM before trying the link you posted.
The return to stock method worked. Thanks!
hi ive just got an insurance replacement for my gnex and it keeps on telling me no update available evan though my last gnex was running 4.2. ive tried the wipe google services framework trick but it keeps telling me no update available. can anybody help please
Does your phone have not stock recovery ? if yes so you need to flash Stock recovery and be on stock rom and then update.
Omer Slomovic said:
Does your phone have not stock recovery ? if yes so you need to flash Stock recovery and be on stock rom and then update.
Click to expand...
Click to collapse
yes ive done a recovery mode reboot but it still comes back with no update available .