Related
This should work for any and all a100 Honeycomb builds, you'll need to install an app from the market called terminal emulator. Also, you'll need a file manager like Astro to unzip the file.
This mod should root your tab in a matter of seconds after the script file is launched. I've tested this on my tab from a clean build and it works like a champ.
Here we go!
- Install the following apps from the market:
Terminal Emulator
https://market.android.com/details?id=jackpal.androidterm&hl=en&rdid=jackpal.androidterm&rdot=1
Astro File Manager
https://market.android.com/details?id=com.metago.astro&hl=en
- Download the attached file from this post.
- Extract and put both the root.sh and su in /mnt/sdcard from the root.zip file.
(Using Astro, find the root.zip file it might be in /mnt/sdcard/Downloads or could be else where if your not using the website to view XDA. Copy it from where ever it's at and paste it in /mnt/sdcard. Press your finger on the zip file and tap Extract when the menu pops up. Tap "Extract to This Directory".)
- Next, open terminal emulator and copy / paste the following:
sh /mnt/sdcard/root.sh
Text will fly by, the script will automatically copy the su binary and install it to the proper location.
Once the script finishes running, be sure to install superuser from the market:
Very Important, if you skip this you won't be "officially rooted yet"!!!
https://market.android.com/details?id=com.noshufou.android.su
Open the superuser app once it's installed, click on the wrench in the upper right corner, scroll to the bottom and find "Su binary v... Tap to check for updates" and tap that link. It should bring you to an update screen, click the button at the bottom to update!
Once you have done the above, then install busybox, Titanium, etc.. if needed.
Thanks goes to abliss for origionally coming up with the root commands!
This mod really just automates his work.
permission denied every step of the way. Used both script manager and terminal
ok terminal manager is out, I didn't realize that doing a hard reset wouldn't wipe the /system/xbin directory completely so technically busybox tools were still installed and sh wouldn't normally be there. I'll see if there's another way..
this method work for any build? and if so, is there any problem during the process that could "kill" my a100 or it's safe?
This method should, yes and it's safe.. It's actually more safe (if that's possible) than the method origionally posted in the dev section since there really isn't any room for user error.
Sent from my MB860 using XDA App
Ill give the new method a go around tomorrow and report back for you.
I wasn't expecting it to anyway, but I figured I'd let you know this doesn't work on the A101.
Hoping someone can find a working root method for this model.
Sorry to hear about the a101, that thing sounds like a tough nut to crack!
Sent from my MB860 using XDA App
This working for me i manage to root my a100
It works and its so simple
Thank you so much for this! It was so easy. Though the only problem I had was with the terminal emulator, no fualt of the Dev, but it might help someone. When I was trying to write in the line of code I kept getting errors because I couldnt get the keyboard to write lower case. So copy and paste if your a noon like me to get it through the terminal.
Well, I dont know what the hell is up with my tab, but Even this didnt work. It showed the file was there, but after I tried installing SU, it didnt get root, so I went back in to verify the file was still there, and nope. It disappeared. I have no idea how, unless somehow mine device is checking the directories, which is the only thing I can think of...
mvan4310 said:
Well, I dont know what the hell is up with my tab, but Even this didnt work. It showed the file was there, but after I tried installing SU, it didnt get root, so I went back in to verify the file was still there, and nope. It disappeared. I have no idea how, unless somehow mine device is checking the directories, which is the only thing I can think of...
Click to expand...
Click to collapse
You sure you don´t have an a101? what build number are you running?
A100_2.007.04_COM_GEN1
Most definitely an A100...
mvan4310 said:
A100_2.007.04_COM_GEN1
Most definitely an A100...
Click to expand...
Click to collapse
I have no idea then.. the only thing I could say is to try and restore from a "Full" rom, like Acer_A100_1.014.08_COM_GEN1 and try to root it before doing anything else. It wouldn't hurt to try anyway and the worst that could happen is that you'd have to restore all your apps and stuff. If we can ever get this thing to run cwm and a different kernel, you'll definitely be needing root.
Works great!
Thanks so much for the script and instructions. Im enjoying my rooted tab yay!
mvan4310 said:
Well, I dont know what the hell is up with my tab, but Even this didnt work. It showed the file was there, but after I tried installing SU, it didnt get root, so I went back in to verify the file was still there, and nope. It disappeared. I have no idea how, unless somehow mine device is checking the directories, which is the only thing I can think of...
Click to expand...
Click to collapse
Did you check the boxes for USB Debugging and Unknown sources just in case?? (in Settings > development)
I checked them both. Root Checker shows I have root, but other apps cant get root access, and SuperUser cant update because of this issue... I dont know what the hell to do because this has me stuck atm... Im gonna flash back to 1.018 and see if that helps, probably not, but it wont hurt to check.
EDIT:
I reverted back and got root. It seems to be the newest update that stopped it. Im updating back up again to see if I retain root. What a pain...
Edit 2:
Yep, Im rooted now. It unrooted me when updating, ran the script you provided and its working now. Dont know why it didnt take before reverting back, but works wonderfully now. Now that Im rooted, let me know what I can do and peek around at to help out here.
Has anyone tried that on an A500?
A500 has its own rooting methods. You can find info about the A500 here
http://forum.xda-developers.com/forumdisplay.php?f=1136
Thanks alot crossix. Worked like a charm.
Sent from my A100 using Tapatalk
Question:
I have used AAHK to downgrade my DHD and root it, but apparently I don't have write access on the system partition. I have succesfully installed AOSPX BR6 and 7 and am now running Nik 's Project X. Tried installing AdAway last night, but when it attempts to change the 'hosts' file (/system/etc/hosts), it fails. I have granted permissions with Superuser when asked for it and I can see it attempt twice before it fails on 'applying hosts file' ('copying of hosts file failed!').
When I try and create a folder or file in the root using ES Explorer, it also fails ('sorry, operartion failed').
HBOOT states 'S-OFF RL'.
What am I doing wrong?
Thx
Largamelion said:
Question:
I have used AAHK to downgrade my DHD and root it, but apparently I don't have write access on the system partition. I have succesfully installed AOSPX BR6 and 7 and am now running Nik 's Project X. Tried installing AdAway last night, but when it attempts to change the 'hosts' file (/system/etc/hosts), it fails. I have granted permissions with Superuser when asked for it and I can see it attempt twice before it fails on 'applying hosts file' ('copying of hosts file failed!').
When I try and create a folder or file in the root using ES Explorer, it also fails ('sorry, operartion failed').
HBOOT states 'S-OFF RL'.
What am I doing wrong?
Thx
Click to expand...
Click to collapse
Adaway seems to act funny with ICS roms sometimes it works other times it wont. Try wiping data on it in menu>manage apps. If that dont help try Adfree from the play store.
That rom has a r/w problem. Have you done the fix to solve it? It's stated in the OP. Use the backup fix. After that, when trying to update it may fail the firsr time, run it again.
Sent from a dream.
Wiping cache did not work. Adfree seems to work fine but doesn't block all ads.
I will look for the fix tomorrow and give it a go.
Thx
Found it, it was in the second OP under patches & mods, must 've missed it. Thx for pointing me in the right direction. Will try tomorrow.
Pfff ... can't even quote another post without 10 post of my own (and I hate image verification ... so hard to decipher).
Flashing busybox zip didn't work, but the backup/restore of the ROM did fix it. SU is updated now and AdAway works perfectly, seems to block all ads.
Thx again.
Using KFU v0.9.8 this evening, I was able to install TWRP v2.4.4.0 and FFF on my 1st gen KF, as well as to root it and install the GO launcher. I'm now interested in installing JB 10.1.
Before I do, however, I want to backup the device Using TWRP's backup feature, I am able to get to the point where it has backed up all 6 partitions. However, it appears to hang at "Updating partition details..." with the words "Generating MD5" at the top of the backup window. FWIW, I have tried it without MD5 and the same problem still happens but then it says "Backing up Android Secure" at the top.
Any ideas what may be causing this and a possible workaround? I'm hesitant to believe this backup will allow me to recover the KF later if needed.
Any advice is appreciated.
Many thanks,
Mumford67
Run smirkit and flash COT Recovery instead of twrp and your issues will magically disappear.
Sent from my Nexus 7 using Tapatalk 2
asf58967 said:
Run smirkit and flash COT Recovery instead of twrp and your issues will magically disappear.
Click to expand...
Click to collapse
That worked perfectly! As it is, came to realization that KFU had never installed Superuser privileges anyway. Had to readjust the batch file to allow enough time for the Kindle to reboot so that it could install Superuser.
Now I'm running with CM's latest Jelly Bean build and all is wonderful!
Thanks for the help!
Mumford67
Same boat but your solution is beyond my experience
Original KF, 6.3.2, KFU 98+, TWRP v2.4.4
I'm in the same boat, stuck at stuck at "updating partition details" TWRP v2.4.4 after seemingly successful backup.
I just used KFU to attempt root. Everything reported ok but there was no SU app listed in my Fire and Root Checker says i don't have root [like Mumford67]. Before doing anything else i decided to backup up everything [1296mb total, 3188mb was free]. TWRP reported 1255 MB TOTAL BACKED UP but now it's stuck there at "updating partition details".
I'm unfamiliar with smirkit and don't know what to edit in the .bat to allow more time to install superuser as Mumford67 described.
Right now my Kindle is on, stuck at:
[1255 MB TOTAL BACKED UP]
Updating partition details....
I really need some help, thanks
---------- Post added at 09:34 PM ---------- Previous post was at 08:55 PM ----------
mebobbob said:
I just used KFU to attempt root. Everything reported ok but there was no SU app listed in my Fire and Root Checker says i don't have root [like Mumford67]. Before doing anything else i decided to backup up everything [1296mb total, 3188mb was free]. TWRP reported 1255 MB TOTAL BACKED UP but now it's stuck there at "updating partition details".
I'm unfamiliar with smirkit and don't know what to edit in the .bat to allow more time to install superuser as Mumford67 described.
Right now my Kindle is on, stuck at:
[1255 MB TOTAL BACKED UP]
Updating partition details....
Click to expand...
Click to collapse
I grabbed my kahonas and just forced a reboot. No idea if the backup is any good, not gonna risk finding out. I sideloaded superuser.apk from KFU folder and that went fine, got my root access.
My objective was simply to get root and backup apps+data for my kids' games before loading jellybean. So far so good...
mebobbob said:
Original KF, 6.3.2, KFU 98+, TWRP v2.4.4
I'm in the same boat, stuck at stuck at "updating partition details" TWRP v2.4.4 after seemingly successful backup.
I just used KFU to attempt root. Everything reported ok but there was no SU app listed in my Fire and Root Checker says i don't have root [like Mumford67]. Before doing anything else i decided to backup up everything [1296mb total, 3188mb was free]. TWRP reported 1255 MB TOTAL BACKED UP but now it's stuck there at "updating partition details".
I'm unfamiliar with smirkit and don't know what to edit in the .bat to allow more time to install superuser as Mumford67 described.
Right now my Kindle is on, stuck at:
[1255 MB TOTAL BACKED UP]
Updating partition details....
I really need some help, thanks
---------- Post added at 09:34 PM ---------- Previous post was at 08:55 PM ----------
I grabbed my kahonas and just forced a reboot. No idea if the backup is any good, not gonna risk finding out. I sideloaded superuser.apk from KFU folder and that went fine, got my root access.
My objective was simply to get root and backup apps+data for my kids' games before loading jellybean. So far so good...
Click to expand...
Click to collapse
Post back if you need help with anything.
Sent from my Samsung Galaxy SV using Tapatalk 3
I'm going to update KFU with more time to upload superuser and I will add an option for COTR. Hopefully I will see less problems like this.
Sent from my One V using xda app-developers app
thanks for continuous development, winging it for now
awidawad said:
I'm going to update KFU with more time to upload superuser and I will add an option for COTR. Hopefully I will see less problems like this.
Click to expand...
Click to collapse
being a half-assed informed newb I used KFU to install COTR by renaming the COTR img to twrp.img in the KFU recovery folder [made a twrp.ori]. COTR installed and did the trick so now I have a couple of different configurations/ROMs backed up to toy around with.
I'm sure if I took more time to learn how it all works there'd be a more straight forward way, but... haha
I am in similar situation. Mine is stuck at "backing up system". How would I force reboot? I am thinking no SU was installed. What can I do ? My wife will kill me if ive messed it up")
scalywhisper said:
I am in similar situation. Mine is stuck at "backing up system". How would I force reboot? I am thinking no SU was installed. What can I do ? My wife will kill me if ive messed it up")
Click to expand...
Click to collapse
To force reboot hold down the power button until it shuts off then power it back on. Also, if SU wasn't installed then boot to TWRP, the under the reboot menu select system and if SU isn't detected it will install it for you. Good luck!
Sent from my One V using xda app-developers app
here's everything i did, going fine now
scalywhisper said:
I am in similar situation. Mine is stuck at "backing up system". How would I force reboot? I am thinking no SU was installed. What can I do ? My wife will kill me if ive messed it up")
Click to expand...
Click to collapse
Generally, I had issues using the KFU 98+ but nothing insurmountable and definitely got everything done that i couldn't get done before!
Follow the KFU/TWRP instructions carefully, as i assume you've done.
Once you run KFU to install SU, your Fire is "ready" to be rooted even if it didn't install the SU app/apk. If you don't have root after running KFU, you can still sideload superuser.apk. With your Fire connected to your PC and ready for file transfers, copy superuser.apk found in KFU\files\ to your Fire. On your Fire, disconnect USB, browse to where you saved superuser.apk and install it. Run the app to establish SU access. Your rooted. Use a rootchecker app to confirm if you need to.
When I got stuck in TWRP, I forced shutdown by holding the power button until it turned off. When i powered back up, it booted fine all the way to Fire home screen. I had a backup of unknown quality because i was unsure if it finished.
To get a good backup, I used COTR [Cannibal Open Touch Recovery], found here
There's nothing wrong with TWRP, it's what I've used before but v2.4.4 simply wasn't reliable for me. The half-assed-but-worked-anyway method for me was installing COTR by using KFU. On your PC, in the KFU folder \recovery\, change the twrp.img to twrp.ori. Copy the COTR image into the same \recovery\ folder [CannibalOpenTouch-v2.1_otter.img downloaded from above link]. Change the COTR filename to twrp.img.
Now, with your Fire connected to PC, Run KFU and install TWRP - it will actually install COTR.
Now reboot your Fire to recovery, same method as you did for TWRP. Use COTR to run Nandroid [standard android backup tool]. works perfect.
This sounds really complicated but it really isn't too rough. Be patient, lots of reboots.
The backups are found in a \cotrecovery\ folder on your Fire. I copied them to my PC for safe keeping. I was able to go back and forth between original setup and new reset configuration fairly easily until I had everything the way I wanted.
To prevent Amazon from updating your fire and taking root away, see this article.
I did all this just because I screwed up my parental access PW on my Fire! only way around that is to reset to factory defaults. I wanted to backup app data [games and a few critical apps] to reload after reset. My kids would have been heartbroken to loose all their progress on a few games and I felt like an idiot for screwing up the password. all said it was worth it to restore root [lost it way back after an update]. I used Mybackup Pro to save apps+data online, GREAT app [requires root to save app data]. Its a regular app you run from Fire home and you can very selectively pick what apps and data you want to backup. Not the same as recovery mode backup, such as TWRP, COTR, or clockwork.
Good luck and I hope this roundabout method helps you if you're still stuck. While i was at it, i tried a few ROMs with ICS and Jellybean but didn't really like them on my Fire and really wasn't up to figuring out how navigate the systems. That's usually something i enjoy but simply not up for it. I'll just get a new tablet to toy with true Android versions! My rooted Samsung SII with stock ICS is fairly easy to configure and navigate.
I'm in the same boat, tried to backup on my ext sd and now its stuck at generating md5. How do I stop or cancel this safely?
jreink01 said:
I'm in the same boat, tried to backup on my ext sd and now its stuck at generating md5. How do I stop or cancel this safely?
Click to expand...
Click to collapse
May need to force, power off
Sent from my XT907 using Tapatalk
sd_shadow said:
May need to force, power off
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Tried that, the only thing that worked was a battery pull. I thought I would ruin my ext sd but it looks like everything is ok. I just backed up successfully to internal. How come it hangs up on the generating md5 on the external sd but not on internal?
jreink01 said:
Tried that, the only thing that worked was a battery pull. I thought I would ruin my ext sd but it looks like everything is ok. I just backed up successfully to internal. How come it hangs up on the generating md5 on the external sd but not on internal?
Click to expand...
Click to collapse
Kindle Fire 1 doesn't have a removable SD card.
Sent from my XT907 using Tapatalk
sd_shadow said:
Kindle Fire 1 doesn't have a removable SD card.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
OK, thanks for trying to help.
---------- Post added at 10:15 PM ---------- Previous post was at 09:56 PM ----------
Update - I did a battery pull and it just seemed to reboot it. Nothing wrong with my external SD card that I can see. I can successfully do a backup on internal but everytime I try on external it gets stuck on generating md5. I have searched google but can't come up with anyone that has had the same issue on the g3. It's a sprint with model LG LG 990.Any help would be greatly appreciated. Just a thought, are there any other recoveries that work on my model g3?
jreink01 said:
OK, thanks for trying to help.
---------- Post added at 10:15 PM ---------- Previous post was at 09:56 PM ----------
Update - I did a battery pull and it just seemed to reboot it. Nothing wrong with my external SD card that I can see. I can successfully do a backup on internal but everytime I try on external it gets stuck on generating md5. I have searched google but can't come up with anyone that has had the same issue on the g3. It's a sprint with model LG LG 990.Any help would be greatly appreciated. Just a thought, are there any other recoveries that work on my model g3?
Click to expand...
Click to collapse
This is a thread for the Kindle Fire 1, you should be asking in a thread for your device, because the answer maybe be different
sd_shadow said:
This is a thread for the Kindle Fire 1, you should be asking in a thread for your device, because the answer maybe be different
Click to expand...
Click to collapse
Sorry, I typed in search g3 twrp freezing and this is what popped up.
I firstly tried to backup with TWRP on sd storage without luck, after 1,30h I give up and canceled that darn thing (the error says: "create tarfork process ended with error:255") and tried to backup on internal storage where it seems it work like a charm. Backup completed in 767sec.
[Tut]How To Systemless Root+Root+More!
This was fully tested on SM-G928A;Baseband:UCU2AOJ1 on 5.1.1
Just in case needed //SM-G928A\\ **Full Odin Restore G928AATT2AOJ1**
$<Download Mode & Odin Systemless Root Flash>
Requirements:
1.A Windows Computer
2.Your Phone Device SM-G92-0/5/8A
3.Odin 3.10.7
4.Kernel_Root_Android_5.1.1_AT&T_SamFirm.NET
5.USB Drivers(Most of the time if connect the phone to the computer using the usb cord that comes with the device it will install all of the drivers if your computer is connected to the internet.
____________________
Okay now assuming that everything has been required, we can begin.
Turn off your phone and open Odin with admin rights on the computer & connect your phone to the computer using the usb cable that comes with the phone.
On the phone now hold all of these following buttons down, Volume Down+Home Key+Power Soon after once you see the blue screen release those buttons and press the Volume Up key to enter Downloading Mode.
Now in Odin on the computer, it should have recognized your device now press the "AP" button and open up for example, "G928A_Kernel_Root_5.1.1_SamFirm.NET.tar.MD5" now just press start and sit back and relax and soon you will have Systemless Root!(Note your phone will reboot which is normal after the flash.
--------------------
#<Obtaining Root Access>
Requirements:
1.A Windows Computer
2.Your Phone Device SM-G92-0/5/8A
3.USB Drivers(Most of the time if connect the phone to the computer using the usb cord that comes with the device it will install all of the drivers if your computer is connected to the internet.
4.Flashed The Systemless Root
5.Kingo Root
6.Root Checker Cost $FREE
7.SuperSU Cost $FREE
8.BusyBox Cost $FREE
9.Developer Options (USB Debug)
____________________
Okay now assuming that everything has been required, we can begin.
Go into Settings>System>About Device & Enable Developer Options.(Keep tapping the "Build Number" category until it says Developer options have been enabled.
Connect your device with your usb that which comes with the phone on the computer. Open "Kingo ROOT" on your computer with admin rights, and once the program asks you to turn USB Debug on, go on your phone into Settings>System>Developer options and make sure it is enabled as well as usb debugging. Wait for kingo root to find your device and once found, it will ask you to either "Reroot,Root, or Remove Root, click "Reroot" then wait for it to start.(After it starts you should see on your phone the kingo root usb app pop-up and show the same thing you see on your computer)
After it is done it should confirm you have been rooted and will ask to donate.
Now you may exit out of the program on the computer and the phone and once out of the app and back on your phone, you will want to look in your app drawer for the kingo root "Superuser" and uninstall this. Then head on over to the playstore if haven't all ready and install "SuperSU" & "Busybox" if want to. Once have the SuperSU app open it and install the su binary updates with the "Normal" option not the recovery one since we don't have that.... & once done just press OK DO NOT REBOOT or you will bootloop and will have to use Odin to reflash your system of your phone to get it back working out of the box "state"
UPDATE Have a pc around and can still boot with root:
Yamaha169 said:
You can restart the device while rooted... but you have to have ADB to do so...
When you reboot ... you will get stuck at the ATT logo... at this point... plug your phone in to your pc...
Open up ADB (COMMAND WINDOW)
type in
ADB devices
until your device # appears in adb... (this can take a minute for your pc to find your phone) so don't panic
This means the phone is found...
From this point... type
ADB ROOT
ADB SHELL
YOU will now be inside the shell of the device with root permissions
Now type
setenforce 0
(MAKE SURE LOWERCASE just like seen. "setenforce 0" if do Setenforce 0 it won't be found.....)
This will set selinux to permissive ... allowing the phone to boot...
Someone with enough experience could probably create a selinux permissive stock kernel ... but I've contacted several developers with no response ...
Click to expand...
Click to collapse
Now open up the root checker app & click verify to see if you truly do have root.(You must grant root access so allow once it pops up.) Enjoy your root but never ever reboot.
UPDATE: How to Root If Possibly not allowing you to root!!!
Step one you will need to of downloaded "Android Studio
Step two you will now need to install all of the updates(Well that's what I did) inside the studio program.
Step three now locate 'program tools" which for me was located here: C:\Users\NameofComputer\AppData\Local\Android\android-sdk\platform-tools
Step four make a cmd.exe file to go in the platform-tools simply just clicking on the "start button" on windows and searching "cmd" then dragging the cmd file to the folder.(Rename it to something like ADB Root or something different than just cmd)
Step FIVE download the su binary which can be located HERE and place it in the "platform-tools" folder.
Step SIX now almost there. Open the cmd file(ADB Root.exe) and once opened, plug the phone into the computer with the cable that came with your phone.
Step Seven:^.^ now with the phone plugged in and the program start, type this command to make sure your device is found:
Code:
adb devices
and if found you will see your attached devices and if more than one or can't see your device, you can do
Code:
adb kill-server
command and it will restart adb.
Step Eight: MAGIC time lol now that your phone is connected and you can see it is indeed listed, type these commands as followed:
Code:
adb root
adb remount
adb push su /system/bin/su
adb shell
chown 0:0 /system/bin/su
chmod 6755 /system/bin/su
You don't really have to do the other commands after pushing su it's just for pre-caution.
Step Nine: Now do the following at the top and try to use the Kingo root once more and click root or reroot.
If this doesn't work try to press unroot and restart phone then try this again.
Also like down below I talk about if you did reboot before you unrooted, you can still unroot but sometimes it's tricky and it needs you to do the adb remount before will work so just remember that...
--------------------
$#$<UnRooting & Keeping Systemless Root So You Can Reboot & Reroot>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights)
3.SuperSU Cost $FREE
4.Root Checker Cost $FREE
____________________
This is very simple and easy to do, all you must do after every root and before every reboot is to go into "SuperSU" and go into the settings and scroll down until you see "Fully Unroot" and click that and once done verify with the root checker that you are indeed unrooted but still have adb shell and once done that you may freely reboot with no bootloop and then if want root once more just use "Kingo Root" on the computer to reroot once more.(I'm hoping someone will come out with an app that does the same thing and works so we don't need the computer anymore which would make it much easier..)
Edit/Update:
I found that if you maybe forgot to unroot before a reboot that you can still unroot without the need of going into odin and reflashing stock system just by connecting your phone to the computer via the usb that which comes with your phone and opening up Kingo Root and waiting for it to find your phone then click unroot and wait for it after you have unrooted and you will hear a sound which means it's fixed! So just force shutdown the device with pressing both: Volume Down+Home Button+Power then it will boot back up as normal!
-------------------- ____________________ -------------------- ____________________
~My Findings Through Long Research & Errors~:
<How to Fix Wifi Bug That Comes With Flashing Systemless Root>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights)
3.SuperSU Cost $FREE
4.BuildProp Editor Cost $FREE
____________________
On your phone open up the "BuildProp Editor".
click on the search button and search for "ro.securestorage.support=true" now once found change the =true to =false and save. Now you must reboot for it to take place but remember to UNROOT before you reboot.
Now doing this your wifi will stay connected and you no longer have to enter your password millions of times so it will be nicer to keep systemless root.
--------------------
<How to Enable AT&T Hotspot System FULLYApp>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights & .SuperSU Cost $FREE)
3.Root Explorer Cost $3.99
4.NEW Modded TetheringProvision .apk Cost $FREE(Also can be found in this thread in attachments.
5.ADB Root cmd knowledge or Download SQLite Editor Cost $2.99
6.BuildProp Editor Cost $FREE
____________________
Okay my fellow members that stayed on 5.1.1 with me, this tut did once work but then at&t blocked me and it stopped working but now rejoice becase there is a bypass once more!!!
NEW WAY:
I'm not sure which worked so I'm gonna just tell you everything that I did...
1.I first rooted obviously
2.I found a new TetheringProvision.apk which I have uploaded down in the attachment and at the top.
3.I used adb root for this but this can also be done with sqlite editior so I'll explain both ways, first way will be the easy way the adb root...>>>
Step 1: Ensure you have the correct OEM drivers installed for your handset on the computer
Step 2: Download and install the necessary ADB drivers (v1.4.2)
Step 3: Enable USB debugging on your Android handset:
Go to Settings > About Device, and tap the build number 7 times or until you see 'You're now a developer' message.
Return to Settings > Developer options and use the toggle button to turn on USB debugging. Then tap OK button to accept the warning and continue.
Step 4:Connect your device to PC with original USB cable.
Step 5: Launch a command window on your Windows PC.
Step 6: Access ADB shell and run the following command:
adb shell now just type " settings put global tether_dun_required 0 " and enter.
________----------Now the sqlite way
Step 1:Go into sqlite editor and allow root rights...
Step 2: Locate "Settings Storage" and click on "Settings.db then click on "global"
Step 3:Locate tether_dun_required 0 and if not there add by clicking on the +
then fill out name as " tether_dun_required " >>And value as " 0 " and then save file and unroot then reboot.
Now then after all of that I downloaded the build.prop which I know you don't have to but it makes it easier for me to do so and probably for you too...
Step 1:Get build.prop editor from the playstore and open it to grant root rights.
Step 2:Click on the pencil icon on the top right where the search icon is.
Step 3: Scroll all the way down to an open line.(If not one make one.)
and put this in the line....>>> " net.tethering.noprovisioning=true " and then click the save button at the top right and then save it and unroot then reboot.
Then replacing the Tetherprovision.apk . >>>
Step 1: Download the NEW modded TetherProvision.apk at top or at bottom.
Step 2: get a root explorer and go to System/App/TetheringProvision
Step 3: Rename the actual TetheringProvision.apk to TetheringProvision.apk.bak
Step 4: in the same location, go into "arm64" and rename the TetheringProvision.odex to TetheringProvision.odex.bak
Step 5: Now locate the modded TetheringProvision.apk you've just downloaded and place it in System/App/TetheringProvision/ now should be two TetheringProvision, the TetheringProvision.apk.bak and the modded one, TetheringProvision.apk.
Step 6: change the property promissions of the tetheringprovision.apk to give it root rights by changing the promissions to look just like the actual one which is " rw-r--r-- "
Step 7: save and unroot then reboot!
Now youre wifi tether and usb should work!!! enjoy!
--------------------
<How to disable OTA & Security Notification>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights & .SuperSU Cost $FREE)
3.Titanium Backup & Titanium Backup Pro License Cost $Free | $5.99
____________________
Open up titanium back with pro license and freeze these following apps:
1.SecurityLogAgent(This is that annoying notification that which comes with the systemless flash root that keeps annoying you to reboot and undo what you done.)
AT&T Software Update(This will make it so AT&T won't push any updates to your device anymore so no need to worry about installing an update ota and losing your root or something else like bootlooping.
And again, all of this sticks after you unroot and reboot!
___________________________________________
<How to Get Youtube RED (Sort of) FREE!>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.OGYoutube Cost $Free
Basically all you do here is download the modded sort of youtube app(OGYoutube) and install it then done! You now can download videos/music on the app and have access to run audio in the background plus NO ADS!!! (if there are I haven't seen any yet...)
Best part of this too since can't be used fttb, no need for XPOSED apk!
_____________________________
<How To Install Viper4android>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights & .SuperSU Cost $FREE)
3.Fast Reboot
4.Soft Reboot
5.Viper4Android V2.3.4.0
6.Audio_Effect.Config
7.Titanium Backup & Titanium Backup Pro License Cost $Free | $5.99
8.IRS Impulse Response Sample files
9.Root Explorer Cost $3.99
~~~~~~~~~~~~~
To Read the tuts yourself than rather follow my tut, you may do so by following This Link & This Link
~~~~~~~~~~~~~~~~~~
Alright, I decided to do my own detail tut to make it much easier so follow me and you'll have viper4android in no time : )
So let's get begin, download if not already, the busybox,SuperSU,TitaniumBackup,Fast reboot,Soft Reboot, & Root explorer. Now having all that done open up Busybox and allow it root rights and you may wait for it to research for a smart intall, or just press install. Once you installed it in the default location System/xbin, click on the will be installed to location and choose System/bin and install it there too.(Not sure why but that's what the tut called for.)
Now let's download the folders for viper4android, go ahead and download Audio_Effect.Config.zip file,IRS Impulse Response Sample files, & the Viper4Android V2.3.4.0 folder.
Now open up the root explorer and unzip all that which is zipped up.(Which is all of the files;Audio_Effect.Config.zip file,IRS Impulse Response Sample files.zip, & the Viper4Android V2.3.4.0 folder.zip
)
Now once all are extracted, we will begin putting what is needed where.
Let's start off with the ViPER4Android_FX_A4.x (The actual name of the folder) you're gonna want to long press it and copy this folder. Once done, you're gonna want to paste this folder in System>Priv-app and make sure to change the permission of the .apk to 0644 rw-r--r-- & the FOLDER to 0755 rwxr-xr-x(The folder should have the same permissions as the other folders in that location.) which is inside the folder to give it root access which is 0644;rw-r--r-- and if not sure what root permission should look like, refer to this link Or Google what it looks like, then save/press ok.
Now go back to where you extracted your folders, and this time copy the "audio_effects.conf and go to System>etc and find and rename the actual audio_effects.conf to audio_effects.conf.bak and then paste the copied modded audio_effects.conf here & DONT FORGET change the permissions to give it root rights.
Now after all is done, open the app "Titanium Backup Pro" and look for and freeze these following applications: 1.Adapt Sound 4.0 & SoundAlive 3.0 now open the app "Soft Reboot (Root) and click yes you want to do a soft reboot. Then once back up(If want you can click the "Fast reboot app" to quickly refresh the system) and running you should see the viper app inside your app drawer. Open it and install the update/software when ask you to and once done it should ask for you to reboot just click on ok and then go out and back to the "Soft Reboot (Root) then do another soft reboot.
Now almost DONE!!! Once back up and running again, go to your root explorer again where you extracted the folders and grab the folder of "ViPER4Android and move it to your device storage ex; Storage/emulated/0 (It's where the download folder is and dcim folder is.. Then finally, go toSettings>Device>Sounds and notifications>Sound quality and effects and toggle on all of the listings[NOTE YOU MUST PUT EARPHONES IN FOR THESE TOGGLES TO SHOW]; UHQ Upscaler|SoundAlive+|Tube Amp Pro now you're done enjoy viper4android via editing the settings in the app.
Edit
You need to download SELinux Mode Changer and give root rights and just click on permissive mode and all done. Also might need to use compatible mode in the Viper4Android settings.
I found that this mod works with Pandora and Youtube app but not with google music or the default music app and not sure how to fix that....
__________________________________0
This is some more quick finds which you don't need a tut for just information I'd like to share so you all know.
I found out that you can use Titanium Backup Pro Cost $5.99 and freeze anything you want such as bloatware and that annoying notification that appears every time you reboot if have systemless root installed "SecurityLogAgent" and as long as you UNROOT before you reboot, it is safe and everything you froze stays frozen.
Now I haven't tried uninstalling any system apps so I wouldn't advise doing that unless you wanted to but I don't see the point except to free space up since you can just freeze anything and does the same thing except for freeing space....
I haven't been able to unlock the bootloader in my research and errors which probably never gonna happen anytime soon....
I also never found an app that could root the device yet without a computer....
And yeah that's it! I just was so happy to find out all of this and just had to share it with xda members which are on the same boat as me that has been wanting some "freedom" which now can have a piece of it. : )
If found these tuts to be helpful, feel free to hit thanks button and if want donate.
AngelRyu said:
Just gonna get right to it and be fast.
Odin Flash Kernel for systemless root.
obtain root
Download SuperSU
After rooted download some sort of buildprop editor and search for " ro.securestorage.support=true" Now change =true to =false. and save!
Now go into the superSU app and fully unroot then reboot and also keep adb shell root!
So you fix the wifi bug plus keep the adb shell so you can obtain root once more! Now we just need some app that can give root access with 1 click without needing a pc and this would work for me until we can actually reboot with root without it bootlooping anyways.... I still can't find a wifi tether app or a method that works for the at&t hotspot app though...
Click to expand...
Click to collapse
Question for clarification.
So current method for rooting g928a is this systemless root.
Question 1, will it brick my phone with this root if i reboot, because i read somewhere on here that the phone will just keep on rebooting.
You mention using superSU app to unroot to reboot. So basically I have to unroot with superSU whenever I want to reboot then reflash again to get root?
fuzmik said:
Question for clarification.
So current method for rooting g928a is this systemless root.
Question 1, will it brick my phone with this root if i reboot, because i read somewhere on here that the phone will just keep on rebooting.
You mention using superSU app to unroot to reboot. So basically I have to unroot with superSU whenever I want to reboot then reflash again to get root?
Click to expand...
Click to collapse
Yes you must unroot to remove the su binary so the system acts like nothing has happen. I use kingo root for windows and it works every time with root all you need to do is hit "root" or it may say "reroot" and works every time. I have been playing with this a lot trying to do things to get it to reboot with root but have failed so far.... I wish someone with more experience would approach this so we could have an app to use at least so we not have to use pc every time to reroot until we get the ability to keep root and reboot.
Kingo root can be found here : https://www.kingoapp.com/android-root.htm
and this works after flashing the kernel from odin. This was the only way I actually found to be able to get root was with this because manually pushing su just didn't work for me....
Thanks for being much clearer on the instructions and idoit proof. I was worried about the bootloop and I thought there was no exit strategy on this expensive phone until you mention reflash. With your extensive tinkering on this, did your knox security trip up?
If this is the only possible way, maybe the community could make some sort of app that if we have to shutdown or reboot the phone specifically for g928a, it will safely unroot it for us.
TASKER?!
Anyone know if this still works after taking the latest OTA a few days ago?
The problem is this isn't root. I restart my phone several times a day. There is no point especially if I can't get a custom OS. However, thanks for making the instructions clear. And for anyone who doesn't understand systemless root, it's temp root. When you reboot dmverity sees the false file structure and tries to rewrite and reverse the changes, effectively removing root. On the Note 5 AT&T for temp root you didn't have to unroot before reboot as it wouldn't boot loop, it would just remove root and let you continue on. So something in this version must be getting farther in breaking past dmverity if it's causing the OS to bootloop.
tonys.94 said:
The problem is this isn't root. I restart my phone several times a day. There is no point especially if I can't get a custom OS. However, thanks for making the instructions clear. And for anyone who doesn't understand systemless root, it's temp root. When you reboot dmverity sees the false file structure and tries to rewrite and reverse the changes, effectively removing root. On the Note 5 AT&T for temp root you didn't have to unroot before reboot as it wouldn't boot loop, it would just remove root and let you continue on. So something in this version must be getting farther in breaking past dmverity if it's causing the OS to bootloop.
Click to expand...
Click to collapse
I was wondering if maybe we could place SU somewhere else so we might could trick it to reboot with root but haven't done it yet and or maybe keep SU on the sdcard/storage and use the terminal on the phone to push su to xbin every reboot but just hoping maybe can get root working without making the stupid thing bootloop.... Like I said I been doing a lot of dumb stuff with my phone because I have been so disappointed in this phone with not having wifi tether at the most really but now that got that I'm much happier but I'm still on the research of keeping root and being able to reboot.
I won't be updating until something maybe for sure comes along with 6.0 I can wait because my galaxy s4 I had stayed on stock version forever because was able to do everything so was no need to update really.... Anyways yeah lol maybe someone greater or maybe my playing around will work. WE can only hope...
Oh yeah, to the other guy NO it did not trip knox doing any of the things I've done. which I wouldn't care if could unlock the bootloader lol...
Edit:
I've done all I can think of and didn't work to keep root on a reboot except it did keep root without bootloop with a soft reboot...
I found out to maybe later will add tut up top but for now I'd like to tell you or whoever, if you do bootloop due to not being able to access the su unroot in time, you can still connect your device with Kingo Root in that bootloop and can unroot to save you from having to reflash every time... Might have to reboot as soon as you hear the found from the unroot though.
Oh and on a factory reset everything sticks excepts what was frozen becomes unfrozen just fyi...
Yeah, that's all I can find so I'm done with it hope someone can help later on but I'm just happy with wifi tether so much : )
So what all can we do with this root
Thank you for your hard work. it's very much appreciated!!!
Will pay part of my bounty which is 50 dollars pay day!!
But, please reply. what all can we do with this root!?
O0Gjulian said:
So what all can we do with this root
Thank you for your hard work. it's very much appreciated!!!
Will pay part of my bounty which is 50 dollars pay day!!
But, please reply. what all can we do with this root!?
Click to expand...
Click to collapse
Hi, I didn't come up with anything but the fix for wifi bug and hotspot app.
I just made a very detail tut to help others, but thanks.
I would wait on the bounty to be paid to someone who can make it possible to keep root on and still be able to reboot.
So in theory with this method I can root, install a modified tetheringprovisions, unroot (as hotspot is the only feature I actually desire), and go about my business without worrying about bootlooping or knox being tripped? Feels too good to be true, but I want to believe.
Just a reminder that Android 6.0.1 is right around the corner. If you don't fully go back to stock before the upgrade it will not flash and could possibly wipe the data partition. Both the system and boot images need to be 100% stock.
antizombie said:
So in theory with this method I can root, install a modified tetheringprovisions, unroot (as hotspot is the only feature I actually desire), and go about my business without worrying about bootlooping or knox being tripped? Feels too good to be true, but I want to believe.
Click to expand...
Click to collapse
It's true, that's how my phone is rolling with frozen apps and the modded hotspot without root, but still the systemless root remains in the system but doesn't do anything with out a computer or applying the kingo root to true root it.
I haven't tested the adaway yet so idk if will work or not.... and I been wanting xpose to work to disable youtube ads but haven't tried that either. . I might root tonight and try out adway tho.
But yeah to your question you are 100% safe and will not change anything or trip anything; phone can reboot all it wants with no bootloops with the modded tether is what I'm trying to say lol .. .
Edit:
Yeah adaway works after unroot and reboot. . . But I decided not to use it because a lot of people us adfly and it wouldn't let me access the link so yeah.....
On another note I froze a lot of stuff and done a lot of things not sure which part caused it but it doesn't bother me because I don't use samsung pay but in the end I had to freeze samsung framework for samsung pay because it kept saying force closed but which again Idc about that app so no biggy to me : )
Was Samsung Pay crashing before you started freezing apps? I have yet to use Pay but I'd prefer to keep my options open if possible.
antizombie said:
Was Samsung Pay crashing before you started freezing apps? I have yet to use Pay but I'd prefer to keep my options open if possible.
Click to expand...
Click to collapse
Honestly, I'm not sure but it had to be either the freezing at&t update or securityagent because it seemed to happen after that... Or could be the hotspot mod but I didn't get any crashes until i froze those 2 apps so idk...
Package Disabler in play store freezes apps so what's the point?
Can you fully remove with TiBu and be safe unrooted?
---------- Post added at 03:55 PM ---------- Previous post was at 03:40 PM ----------
navalynt said:
Just a reminder that Android 6.0.1 is right around the corner. If you don't fully go back to stock before the upgrade it will not flash and could possibly wipe the data partition. Both the system and boot images need to be 100% stock.
Click to expand...
Click to collapse
Yeah and from what I've seen of the nightmares people have been having with their Note 5's on Marshmallow, I'm staying FAR away from it!
I can confirm this works. Sorta a pain to have to reroot but hey, It's progress. We may never have a custom ROM option or recovery, But this is the next big thing. If we can find a app that'll just reroot us. it's perfect. (somewhat) Just rooted a few minutes ago. Going to play around. More than likely I'll re flash stock and make a youtube video for anyone needing questions or wanting to see it be done.
And I lied.. So, My experience was weird. Lagging constantly and weird download issues with a fresh wipe.
I'm sadly gonna have to unroot and hope that a better method would come out.
):
O0Gjulian said:
I can confirm this works. Sorta a pain to have to reroot but hey, It's progress. We may never have a custom ROM option or recovery, But this is the next big thing. If we can find a app that'll just reroot us. it's perfect. (somewhat) Just rooted a few minutes ago. Going to play around. More than likely I'll re flash stock and make a youtube video for anyone needing questions or wanting to see it be done.
And I lied.. So, My experience was weird. Lagging constantly and weird download issues with a fresh wipe.
I'm sadly gonna have to unroot and hope that a better method would come out.
):
Click to expand...
Click to collapse
I'm not sure why you would experience "lag" because I have no lag what so ever. Maybe try going to settings>system>developer options and change both transition animation scale and window animation scale to 0.5x
I've reflashed stock many of times due to to trying to find everything there is to find and I've had no "lag" but also you could download the soft reboot and fast reboot from market. Fast reboot frees up memory via closing and restarting certain apps, and soft reboot kills zygote and does a "hot reboot" without going through whole start up process .
Please reply I'm gonna try and help you : )
Also @
joe3681 said:
Package Disabler in play store freezes apps so what's the point?
Can you fully remove with TiBu and be safe unrooted?
---------- Post added at 03:55 PM ---------- Previous post was at 03:40 PM ----------
Yeah and from what I've seen of the nightmares people have been having with their Note 5's on Marshmallow, I'm staying FAR away from it!
Click to expand...
Click to collapse
I can confirm freezing anything won't harm the system on a reboot after unrooting but not sure about removing the apps would be safe. I have however remove the youtube app and reinstalled it in play store and it didn't harm anything.
AngelRyu said:
I'm not sure why you would experience "lag" because I have no lag what so ever. Maybe try going to settings>system>developer options and change both transition animation scale and window animation scale to 0.5x
I've reflashed stock many of times due to to trying to find everything there is to find and I've had no "lag" but also you could download the soft reboot and fast reboot from market. Fast reboot frees up memory via closing and restarting certain apps, and soft reboot kills zygote and does a "hot reboot" without going through whole start up process .
Please reply I'm gonna try and help you : )
Thanks for helping me! I went ahead and flashed stock and followed your steps!
Working great now!
NOW, My next question... What difference would it make if I used package disabler pro VS TBU?
Wouldn't both of these apps freeze the processes? Or would it make a difference with root and SU access?
Click to expand...
Click to collapse
O0Gjulian said:
AngelRyu said:
I'm not sure why you would experience "lag" because I have no lag what so ever. Maybe try going to settings>system>developer options and change both transition animation scale and window animation scale to 0.5x
I've reflashed stock many of times due to to trying to find everything there is to find and I've had no "lag" but also you could download the soft reboot and fast reboot from market. Fast reboot frees up memory via closing and restarting certain apps, and soft reboot kills zygote and does a "hot reboot" without going through whole start up process .
Please reply I'm gonna try and help you : )
Thanks for helping me! I went ahead and flashed stock and followed your steps!
Working great now!
NOW, My next question... What difference would it make if I used package disabler pro VS TBU?
Wouldn't both of these apps freeze the processes? Or would it make a difference with root and SU access?
Click to expand...
Click to collapse
I'm not sure because I've never heard of that program, but I did buy it just now for about $1.89 and the activation keeps failing so I can't test it to see the difference but with titanium you can do everything not just freeze stuff but back up apps and their data and much more.
Titanium backup has been around for ages which is why I recommend it.
Click to expand...
Click to collapse
I use package Disabler. Works like TiBu without root. Only reason to root would be to fully remove apps but would it boot okay after?
I'm having a problem with es file explorer and root explorer. Last night my fire tv kept booting to home screen and rebooting, so I had to re-install 5.0.5.1 prerooted rom thru recovery. I reinstalled all my apps, and when trying to enable root explorer, I get the superuser request as usual, I grant and get the notification that it's been granted. Root explorer access is enabled for about 6 seconds before disabling with the message "Sorry, test failed. This feature cannot run on your device". Adaway works fine when asking for su permission. Only thing I did differently this time around with installation of the rom is I installed Es file explorer and tried to enable root explorer before doing the SU command from adb shell. I've since uninstalled and reinstalled ES file explorer and reacquiring SU permission but it does the same thing. I went and installed a much older version and it does the exact same thing. Anyone else come across this problem?
The only thing I could suggest would be to remove the manager app es file explorer & reinstall the prerooted rom again? Then start fresh, Su, then after you get access then reinstall es? Only other thing I would say if that don't work is do a factory reset (but only do it from within TWRP Recovery!) Then reinstall the prerooted, block updates, grant Su & then see if that works for you? I use ES pro & Root Explorer & haven't had no problems at all.
deanr1977 said:
The only thing I could suggest would be to remove the manager app es file explorer & reinstall the prerooted rom again? Then start fresh, Su, then after you get access then reinstall es? Only other thing I would say if that don't work is do a factory reset (but only do it from within TWRP Recovery!) Then reinstall the prerooted, block updates, grant Su & then see if that works for you? I use ES pro & Root Explorer & haven't had no problems at all.
Click to expand...
Click to collapse
Thanks for your reply. I'll do what another user suggested and use Total Commander instead as I have it installed and granted root access for it, and it does the same functions. I haven't had any issues with es file explorer on my ftv 2 at all, but another user reported the exact same problem in a different thread on this forum so I'm not alone.
Ok mate no worries, just a note I have both manager apps working on 2 sticks (1 rooted & 1 not, both updates blocked but on different firmware) & also on my prerooted AFTV2 so dunno what happened with yours & the other forum member?
Sent from my SM-G900F using Tapatalk
i have this same issue on 2 firebox's after a full conversion from os3, running rbox latest 5.2.x
both give the identical error, yet other apps are getting su control just fine?
any idea's? @rbox
I am having this problem on my first FTV1 I upgraded from PreRooted FireOS 3 to latest PreRooted FireOS 5. It is a fully rooted with fully unlocked bootloader FTV1. ES File Explorer is giving me this error when trying to turn on its Root Explorer option and all though Total Commander & Root Explorer are not giving me this error. They are not letting me copy files from a Root folder into regular storage. I can view them & choose them but it errors out when trying to copy over. I had to copy them thru TWRP.
I plan to do a Factory Reset thru TWRP & reinstall the latest PreRooted Rom again. But this time after doing the TWRP special build number update blocking tweak. I plan to run the SU command before installing any apps. Will see if that helps at all or not. If not I will post more detail info in case someone can help. This is the last bug I've encounter since doing the move from FireOS 3 to FireOS 5.
@d3adpool , @deanr1977 , @LittleBill21
Where you guys ever able to come up with an answer or fix for this issue ??
Unfortunately no, I'm sure reinstalling the rom via twrp would've fixed it but never did. That ftv has since stopped working.
Y314K said:
I am having this problem on my first FTV1
Click to expand...
Click to collapse
ESFE's root explorer has worked fine for me on multiple sticks, running various firmware versions (5.0.5, 5.2.1.0, pre-rooted 5.0.5_r1)
I didn't see mention of which device the OP was using -- but I'm going to go out on a limb and say FTV1 as well.
The same apk on pre-rooted 5.0.5 FTV1 box gives me that error message.
It seems like this just affects 1st-gen firetv boxes.
The question is whether it's linked/limited to pre-rooted bueller ROMs or just AFTV1's in general.
I didn't use ESFE until I was already on bueller-5.0.5_r2, I wonder if it works on stock 5.x.x rooted with kingroot?
d3adpool said:
Unfortunately no, I'm sure reinstalling the rom via twrp would've fixed it but never did. That ftv has since stopped working.
Click to expand...
Click to collapse
Sorry to hear that, thanks for responding. I had already done a few reinstalling of the latest PreRooted Rom via TWRP without that fixing it. Will keep at it, though.
phresch said:
ESFE's root explorer has worked fine for me on multiple sticks, running various firmware versions (5.0.5, 5.2.1.0, pre-rooted 5.0.5_r1)
I didn't see mention of which device the OP was using -- but I'm going to go out on a limb and say FTV1 as well.
The same apk on pre-rooted 5.0.5 FTV1 box gives me that error message.
It seems like this just affects 1st-gen firetv boxes.
The question is whether it's linked/limited to pre-rooted bueller ROMs or just AFTV1's in general.
I didn't use ESFE until I was already on bueller-5.0.5_r2, I wonder if it works on stock 5.x.x rooted with kingroot?
Click to expand...
Click to collapse
This is definitely an FTV1 Bueller on FireOS 5 PreRooted Rom problem. And in my case it is tied to the "unable to access the /sdcard and other directories while in su mode" bug. But the .zip fix provided over @ the PreRooted Rom OP is not fixing the issue. Gonna post a more detail assessment of what I am encountering & what I've tried to fix the issue & failed so far in a bit.
---------- Post added at 01:07 AM ---------- Previous post was at 12:17 AM ----------
@RBox ; @AFTVnews.com
Decided to upgrade my first TowlRoot Rooted Bueller FTV1 on the last FireOS 3 PreRooted Rom (v51.1.6.3) to the latest FireOS 5 PreRooted Rom (v5.2.1.1_r1). I verified that I meet all the requirements. My bootloader was FULLY unlocked & I was on the latest CWM (v6.0.5.1.4a) with BootMenu (v1.0). I decided I wanted from the start the upgrade on as a clean as possible FTV1. So I uninstalled all programs except for SuperSU. Then I went into CWM & did a Factory Reset (Wipe Dalvik, Cache, Factory Reset) from within CWM & Reinstalled the last FireOS 3 PreRooted Rom (v51.1.6.3). All that was left after the Factory Reset was SuperSU.
Then I pushed over the TWRP bueller-twrp_3.0.0-7.img to the /SDCard & verified it's hash to make sure it was not a corrupt upload. Then I ran the command to switch to the TWRP recovery & everything installed perfectly.
I had ready a USB stick (Fat32) so I could install & md5 verify the FireOS 5 PreRooted Rom (v5.2.1.1_r1) on installation. Booted into TWRP & first did a wipe from within TWRP of Dalvik, Cache, Data & Internal Storage. Then installed the FireOS 5 PreRooted Rom (v5.2.1.1_r1) without any errors. Then I rebooted into system & it went thru it's paces. I did hit a road block when it came to check updates. This was because I was blocking the HTTPS update address from both my router & thru OpenDNS. I did a few re-flashes of the FireOS 5 PreRooted Rom (v5.2.1.1_r1) until I figure out that since this was the latest Rom version I should just let it talk to the update servers or do the PropBuild mod. So finally I got past the update nag. I first turned on ADB Debuging & I first did the SU command & chose to GRANT SuperUser rights. Then I did the update block command from SU. I installed my apps & the only bug I found after that was that ES File Explorer, even after it has been granted SuperUSer rights. It will error out "Sorry, test failed. This feature cannot run on your device". I thought this problem was just with ES file Explorer. But it seems to happen to a lesser degree on Total Commander & Root Explorer too. On those I can see the Root directories. But if I ever try to copy something over from /Root to /SDcard or to /USB it won't allow it. They will have some type of error that stops it. Or makes /SDCard disappear.
Then I notice the "Can't cd to /sdcard after using su? Install this TWRP flashable zip to fix it." post in the PreRooted Rom's OP. And decided to do the SU test of "[email protected]:/ # ls -al /sdcard" & sure enough. I always get the non SU response of:
"lrwxrwxrwx root root 1970-01-06 19:40 sdcard -> /storage/emulated/legacy"
I tried flashing the bueller-fixsusdcard.zip thru TWRP on that install but nothing changed on the test response. Then I tried to do a full reinstall of the PreRooted Rom with the bueller-fixsusdcard.zip as a secondary .zip to flash during the installation. And same... Then I re-verified that I do have a unlocked bootloader. And that I am rooted. Passed on both. I was able to verified I am rooted by using an SDCard app while trying to see what size my MBCache.db file was. I was able to find it in /Data/Data/ without any problem.
So this is where I am at. I wonder if the bueller-fixsusdcard.zip file needs an update for FireOS 5 PreRooted Rom (v5.2.1.1_r1). Or should we try to install SuperSU as a secondary .zip file in TWRP or what can possibly be the answer to getting SU & Root working properly.
I would appreciate any ideas to try.
Y314K said:
This is definitely an FTV1 Bueller on FireOS 5 PreRooted Rom problem. And in my case it is tied to the "unable to access the /sdcard and other directories while in su mode" bug. But the .zip fix provided over @ the PreRooted Rom OP is not fixing the issue. Gonna post a more detail assessment of what I am encountering & what I've tried to fix the issue & failed so far in a bit.
Click to expand...
Click to collapse
I had the su & /sdcard/ problem too.
I'm going to guess that things went something like this (they did for me):
1] installed twrp & pre-rooted bueller ROM
2] discovered that the included superSU had no GUI
3] replaced superSU with another version to access a GUI
4] discovered su/sdcard bug
5] found & flashed the zip fix
6] tried to su /sdcard/ & still doesn't work
But if I ever try to copy something over from /Root to /SDcard or to /USB it won't allow it. They will have some type of error that stops it. Or makes /SDCard disappear.
Then I notice the "Can't cd to /sdcard after using su? Install this TWRP flashable zip to fix it." post in the PreRooted Rom's OP. And decided to do the SU test of "[email protected]:/ # ls -al /sdcard" & sure enough. I always get the non SU response of:
"lrwxrwxrwx root root 1970-01-06 19:40 sdcard -> /storage/emulated/legacy"
Click to expand...
Click to collapse
I was able to remedy this part of the problem; at this point, I still can't access Root Explorer within ES File Explorer..
However, I am able to access /sdcard/ and other previously invisible folders, as well as using RootBrowser and RootExplorer apps.
I'm pretty sure the reason that the zip flash didn't work is because (assuming swapped versions of superSU) your installed superSU binaries are different from the ones the zip was intended to fix.
You have a couple of options, both will give pretty close to the same end result:
First option:
1. re-flash your firmware ROM
2. flash the zip to fix the mount namespace problem
3. install a different SuperSU with a GUI
Second option:
Install a version of SuperSU that includes a 'disable mount namespace' toggle button, and toggle it. v2.05 works for me.
Hopefully that helps
phresch said:
...
Second option:
Install a version of SuperSU that includes a 'disable mount namespace' toggle button, and toggle it. v2.05 works for me.
Hopefully that helps
Click to expand...
Click to collapse
I searched for a download of v2.05 and could only fine sources that I did not trust. Do you have a link to that version?
phresch said:
I had the su & /sdcard/ problem too.
I'm going to guess that things went something like this (they did for me):
1] installed twrp & pre-rooted bueller ROM
2] discovered that the included superSU had no GUI
3] replaced superSU with another version to access a GUI
4] discovered su/sdcard bug
5] found & flashed the zip fix
6] tried to su /sdcard/ & still doesn't work
Click to expand...
Click to collapse
I haven't tried to change or flash to a different SuperSU then the one that comes stock with the PreRooted Roms. Which is v2.46. Trying my best not to loose having a Fully unlocked bootloader. Are you flashing/testing the different versions of SuperSU thru TWRP or are you just flashing APK's just to try to see which one's GUI might still work ?
I notice the SU /SDCard bug only after trying out Total Commander & Root Explorer. Others said those where working fine for them. But for me it looked like they where gonna work fine. But as soon as any of those went to Root mode. I started to see bugs in those programs too. Although in those programs I can at least view Root files. And this last time Root Explorer is letting me copy files over from Root to /SDCard. Total Commander is still hanging when trying to copy files from Root to /SDCard. Like I said this last time I installed the /SDCard SU .zip fix right after I flashed the PreRooted Rom. So it did changed something. But from ADB I still get the same response from the SU List command.
phresch said:
I was able to remedy this part of the problem; at this point, I still can't access Root Explorer within ES File Explorer..
However, I am able to access /sdcard/ and other previously invisible folders, as well as using RootBrowser and RootExplorer apps.
I'm pretty sure the reason that the zip flash didn't work is because (assuming swapped versions of superSU) your installed superSU binaries are different from the ones the zip was intended to fix.
Click to expand...
Click to collapse
I have not swapped SuperSU from what comes with the PreRooted Rom. Trying other SuperSU versions might be something I do after getting some feedback from @rbox since I really do not want to accidentally loose my Fully unlocked bootloader.
phresch said:
You have a couple of options, both will give pretty close to the same end result:
First option:
1. re-flash your firmware ROM
2. flash the zip to fix the mount namespace problem
3. install a different SuperSU with a GUI
Click to expand...
Click to collapse
Are you doing the SuperSU changing thru APK flashing or thru TWRP zip flashing ? Do you know a link to where we can find most versions of SuperSU from v2.16 (used when we towelrooted) to v2.78 ? I see v2.79 is the latest version. Have you tried v2.79 on your FTV1 ? Is there a version of SuperSU we shouldn't go beyond ?
phresch said:
Second option:
Install a version of SuperSU that includes a 'disable mount namespace' toggle button, and toggle it. v2.05 works for me.
Hopefully that helps
Click to expand...
Click to collapse
Please post v2.05. I wonder if we can go down to v2.05 for that option. And then when things are working right go back to v2.46.
Either way ES File Explorer / Root Setting will not work for your right. Not matter what?
Hope I can get past this bug before updating my other 3 FTV1's.
Just ran into something else that is very odd. I've been using Amazon FireTV Utility App v0.66 to access ADB non-Root & Root Shell. Decided to switch to the stand-alone "adb-setup-1.4.3" to see if that would help with the SU commands. But I found that as soon as I give it the "adb shell su" command. Even if SuperSU has been granted full access on a fresh install of the PreRooted Rom on the FTV1. The "[email protected]:/ # _" line gives me a blinking _ & it won't let me input anything else. On the FTV1's screen it says "ADB Shell (2000)" was granted root access each time. But I can't get past that. Is like ADB never receives the granted access response. Then I have to CTRL+C to be able to input anything & exit. This happens whether I opened the CMD with & without Admin rights on my Windows 8.1 PC.
Gonna try downgrading to adb-setup-1.4.2 but I doubt it will make a difference. So the bugs are bunching up. Seems SuperSU is not being installed or allowed to work properly. Any help would be appreciated.
Forgot that on FireOS 5 you have to break the command.
First "adb shell" to get "[email protected]:/ $" & then just "su" to get to "[email protected]:/ #" without it freezing.
The /SDCard list still had the same response though.
"lrwxrwxrwx root root 1970-01-07 19:45 sdcard -> /storage/emulated/legacy"
Solution:
First let me start by Thanking @rbox , @AFTVnews.com , @zroice , @phresch for all their work & feedback.
Was finally able to test multiple options & found a reproducible solution to this problem. The key was in @zroice post about Holo Themer.
https://forum.xda-developers.com/fi...w-to-supersu-xposed-app-t3552590#post71703744
Basically you got to make sure you install or have installed the latest version of BusyBox & XPosed & HDXPosed Module. And to have activated Holo Themer from within XPosed so you can run the SuperSU APK that comes with the PreRooted Rom. SuperSU should ask you to update. Once you have done a "Normal" update like we did when we first rooted our FTV1's then that should fix the Root Option fail that ES File Explorer & other apps have had. I am guessing the problem comes when we uninstall or wipe our FTV1's during our FireOS 3 to FireOS 5 update. Some of us thought BusyBox & Xposed would not be as important to functionality on FireOS 5 as it was on FireOS 3.
Make sure you only activate Holo Themer on a per needed basis. Since it will make your FTV reboot randomly if you leave it on all the time.
And like always. As long as you installed TWRP correctly. You can always start anew with a wipe (NEVER WIPE SYSTEM) & install of the latest PreRooted ROM. I would also recommend having all the files you know you will need in a USB drive or SDCard in FTV2's case ready to go & in separate folders before you start flashing away. Makes things much easier.
If you forgot how to install BusyBox or XPosed you can always find how in the many guides over @ AFTVNews.com . For me even the old FireOS 3 guides & FTV2 guides help as a good refresher or visual confirmation.