I apologize, I posted this in the General Info section by mistake. I don't know how to delete that post, but wanted to post correctly here.
Three days ago I went through the process of rooting my kindle fire using KFU. Being a noob, this took me many many hours. I got everything to work, GO Launcher, Google Play, Amazon App store. I even used the Voodoo OTA Rootkeeper to temporily un-root so that I can watch amazon streaming videos. I was feeling pretty good about my accomplishment.
Late last night, for no apparent reason, the Kindle Fire restarted itself and got stuck on the yellow triangle (is this FireFireFire?). I got nervous, freaked out a little. I plugged into my computer and tried to restart the Kindle after selecting 'Recovery (5001)'. No luck. I then tried the same thing after selecting 'Normal (4000)'. I could hear the USB connect/disconnect many times and then I saw the "Kindle Fire" screen and let out a sigh of relief. It booted up just fine. This was about 2 hours ago.
But, now, my Kindle randomly goes back to the yellow triangle and hangs there. I need to go through the same process above to fix things. This has happened at least four times already. It did not seem to happen while the Kindle was "connected" to my computer. It happens once I 'disconnect'.... usually after about 10 - 20 minutes. It has happened while using both GO Launcher EX and the Amazon Launcher. Any idea?
Related
hey guys, i bought the fire for my wife for valentines day, immediately rooted it to get rid of that terrible kindle launcher and stuff, well, I've got a transformer prime and galaxy nexus, so after a couple months of her playing with my ics awesomeness she now wants to come over the good side, only t hing is, for the life of me i can't rememeber what i did as far as recover goes on this fire. I've read to hold the power button until it turns orange, but it won't do that for me. So how do i get into recovery with the kindle fire?
With your Kindle Fire off, hit the power button (and release it), and wait for the FireFireFire logo (triangular) to appear. Then, hit the power button until it turns from green to orange/red, and let go. You will then go into recovery.
first off, thank you very much for your reply.
When i pushed the power button (with the kindle off) it just went to a black screen with the word "kindle" in white and the word "fire" in orange. stayed there for about a minute or two then booted up. never a yellow triange.....any ideas?
vballrkc said:
When i pushed the power button (with the kindle off) it just went to a black screen with the word "kindle" in white and the word "fire" in orange. stayed there for about a minute or two then booted up. never a yellow triange.....any ideas?
Click to expand...
Click to collapse
Oops! Looks like you lost FireFireFire somewhere along the way. Probably because of the recent Kindle update, which also would have unrooted you, unfortunately. You will need to re-root (which will reload the FireFireFire boot loader).
The Kindle Fire Utility can root a 6.3 (OS) Kindle Fire. Not sure how you rooted last time. If you did not use KFU, the old procedure you used may not work any longer.
Ah. Ok. I was unaware you get iota updates after rooting. Thanks ill just start all over.
I have searched and searched for three nights already. I actually opened the kindle in fustrsation hoping it was only a lose cable or something. No luck. My kindle was running ICS and one night it turned off. I plugged it in the charger and called it a night. In the morning I turned it back on but no go. And its been like that ever since. I have no idea how to get it to connect to my laptop. I tried everything and anything I found here and elsewhere online. Everyone says to connect or put on boot mode or something. But I have no idea if the kindle is even on or not. It just has a blank screen and thats it. I tried using the various tools such as kindle unblock utility and kindle utility but there useless since I can't connect the kindle cause i don't know if its on or not. Then I tried loading the drivers that came with unbrick utility but it says something about driver is unsigned. Scoured the web for an answer to THAT dilemma and nobody has a real solution. Seems every solution starts with, "connect device in fasboot or slow boot or snail boot" but the whole point of seeking a solution as far as Im concerned is cause the device DOES NOT CONNECT OR CANT CONECT TO ANYTHING!!!! Im at my wits end. Its three in the morning and my wife is on her 5th dream...again this week!!!! Please help!!! Im willing to ship this POS out to anyone that can fix it and I will donate a g2X rooted and unlocked for your time!!!! I swear I will!!! I just want to get this over with. PLEASE HEKP!!!!!!!!!!!!!
you need to use firekit.
it allows you to boot your pc of a linux usb live pen drive with some tools preloaded.
all you need is to shortout a contact inside kindle and insert usb cable into kindle at the same time.
ill post a link in a minute. just follow the instructions exactly and i'm sure it will bring your kindle back to life.
hope this helps
steve
sent from my new non bricked kindle
---------- Post added at 11:34 AM ---------- Previous post was at 11:22 AM ----------
link is here http://forum.xda-developers.com/showthread.php?t=1430038
Get a new replacement one...
alekslove said:
I have searched and searched for three nights already. I actually opened the kindle in fustrsation hoping it was only a lose cable or something. No luck. My kindle was running ICS and one night it turned off. I plugged it in the charger and called it a night. In the morning I turned it back on but no go. And its been like that ever since. I have no idea how to get it to connect to my laptop. I tried everything and anything I found here and elsewhere online. Everyone says to connect or put on boot mode or something. But I have no idea if the kindle is even on or not. It just has a blank screen and thats it. I tried using the various tools such as kindle unblock utility and kindle utility but there useless since I can't connect the kindle cause i don't know if its on or not. Then I tried loading the drivers that came with unbrick utility but it says something about driver is unsigned. Scoured the web for an answer to THAT dilemma and nobody has a real solution. Seems every solution starts with, "connect device in fasboot or slow boot or snail boot" but the whole point of seeking a solution as far as Im concerned is cause the device DOES NOT CONNECT OR CANT CONECT TO ANYTHING!!!! Im at my wits end. Its three in the morning and my wife is on her 5th dream...again this week!!!! Please help!!! Im willing to ship this POS out to anyone that can fix it and I will donate a g2X rooted and unlocked for your time!!!! I swear I will!!! I just want to get this over with. PLEASE HEKP!!!!!!!!!!!!!
Click to expand...
Click to collapse
I did bricked my first Kindle, then I called Amazon (it still in warrentee), they sent me a new one next day. They tell you to send the old one back. They did not even ask me what happened. I've just said it no longer worked.
alekslove said:
I have searched and searched for three nights already. I actually opened the kindle in fustrsation hoping it was only a lose cable or something. No luck. My kindle was running ICS and one night it turned off. I plugged it in the charger and called it a night. In the morning I turned it back on but no go. And its been like that ever since. I have no idea how to get it to connect to my laptop. I tried everything and anything I found here and elsewhere online. Everyone says to connect or put on boot mode or something. But I have no idea if the kindle is even on or not. It just has a blank screen and thats it. I tried using the various tools such as kindle unblock utility and kindle utility but there useless since I can't connect the kindle cause i don't know if its on or not. Then I tried loading the drivers that came with unbrick utility but it says something about driver is unsigned. Scoured the web for an answer to THAT dilemma and nobody has a real solution. Seems every solution starts with, "connect device in fasboot or slow boot or snail boot" but the whole point of seeking a solution as far as Im concerned is cause the device DOES NOT CONNECT OR CANT CONECT TO ANYTHING!!!! Im at my wits end. Its three in the morning and my wife is on her 5th dream...again this week!!!! Please help!!! Im willing to ship this POS out to anyone that can fix it and I will donate a g2X rooted and unlocked for your time!!!! I swear I will!!! I just want to get this over with. PLEASE HEKP!!!!!!!!!!!!!
Click to expand...
Click to collapse
I was in the same situation as you were, i messed up my KF but was able to revive it using the USB Firekit (link in the first reply you got), just follow it carefully. This will require you to open up your KF.
Dont despair, it will work
if you have probs with firekit.
post as much detail as pos of what you've done and where you're at in the process.
its not too hard as long as you follow the post to the T.
let us know how you get on.
cheers
steve
Sent from my Galaxy Nexus using xda premium
I had the same problem, but I fixed it by my resolder my USB port
Sent from my PG86100 using xda premium
alekslove said:
I have searched and searched for three nights already. I actually opened the kindle in fustrsation hoping it was only a lose cable or something. No luck. My kindle was running ICS and one night it turned off. I plugged it in the charger and called it a night. In the morning I turned it back on but no go. And its been like that ever since. I have no idea how to get it to connect to my laptop. I tried everything and anything I found here and elsewhere online. Everyone says to connect or put on boot mode or something. But I have no idea if the kindle is even on or not. It just has a blank screen and thats it. I tried using the various tools such as kindle unblock utility and kindle utility but there useless since I can't connect the kindle cause i don't know if its on or not. Then I tried loading the drivers that came with unbrick utility but it says something about driver is unsigned. Scoured the web for an answer to THAT dilemma and nobody has a real solution. Seems every solution starts with, "connect device in fasboot or slow boot or snail boot" but the whole point of seeking a solution as far as Im concerned is cause the device DOES NOT CONNECT OR CANT CONECT TO ANYTHING!!!! Im at my wits end. Its three in the morning and my wife is on her 5th dream...again this week!!!! Please help!!! Im willing to ship this POS out to anyone that can fix it and I will donate a g2X rooted and unlocked for your time!!!! I swear I will!!! I just want to get this over with. PLEASE HEKP!!!!!!!!!!!!!
Click to expand...
Click to collapse
do you know what 3.0 kernel version you had installed. if it was #10 or lower follow the instructions below. my kf did the same thing and it's any easy fix. most likely your kf's battery is completely utterly dead.
NOTE: this may or may not work depending on what the kfu or unbrick utility did without you knowing.
1. plug your kf into the wall charger.
2. press and hold the power button until the light comes on. if this happens it will boot to a black blank screen but you will notice the backlight is on. let it sit this way overnight.
3. after it has sat overnight, unplug it from the charger and hold the power button until it powers off (light will go off as well ass back light lcd)
4. hold the power button until it comes back on. let it fully boot. you'll notice the time and date are incorrect.
5. power off again
6. download hashcodes newest 3.0 kernel #12
7. power back on and boot into recovery.
8. flash the newest kernel you downloaded
9. wipe dalvik and cache
10. reboot normally.
you'll then need to reset the date and time and you shouldnt have any problems after that.
alekslove said:
I have searched and searched for three nights already. I actually opened the kindle in fustrsation hoping it was only a lose cable or something. No luck. My kindle was running ICS and one night it turned off. I plugged it in the charger and called it a night. In the morning I turned it back on but no go. And its been like that ever since. I have no idea how to get it to connect to my laptop. I tried everything and anything I found here and elsewhere online. Everyone says to connect or put on boot mode or something. But I have no idea if the kindle is even on or not. It just has a blank screen and thats it. I tried using the various tools such as kindle unblock utility and kindle utility but there useless since I can't connect the kindle cause i don't know if its on or not. Then I tried loading the drivers that came with unbrick utility but it says something about driver is unsigned. Scoured the web for an answer to THAT dilemma and nobody has a real solution. Seems every solution starts with, "connect device in fasboot or slow boot or snail boot" but the whole point of seeking a solution as far as Im concerned is cause the device DOES NOT CONNECT OR CANT CONECT TO ANYTHING!!!! Im at my wits end. Its three in the morning and my wife is on her 5th dream...again this week!!!! Please help!!! Im willing to ship this POS out to anyone that can fix it and I will donate a g2X rooted and unlocked for your time!!!! I swear I will!!! I just want to get this over with. PLEASE HEKP!!!!!!!!!!!!!
Click to expand...
Click to collapse
i think i can help you .But i am in shanghai of China.
because this KF was made in our factory
Hold the power button for like a few mins couldn't hurt then try to power it on
Sent from my DROIDX using Tapatalk 2
Not to mention since you have the back off disconnect the battery for awhile then reconnect and power it on
Sent from my DROIDX using Tapatalk 2
If that doesn't work use pookeys firekit http://forum.xda-developers.com/showthread.php?t=1430038
Sent from my DROIDX using Tapatalk 2
I have it working now. But one issue. The Kindle boots up normally now first into FFF then to android. Everything seems to be working fine except my battery shows 0% charge all the time. It does not charge. I unplug it and immediately shuts down. Anyone know what I can do to fix this? By the way, thanks for everyone who helped or contributed some input. By the way if anyone wants to know the method that work led was the Firekit method using Ubuntu Linux and the short test trick. I tried it several times even had some help on Teamviewer from a very helpful member. But after trying as few commands, it finally booted to the yellow triangle and after that I went to recovery and reinstalled CM9. So yeah everything seems to work now except the battery basically acts like its not even there.
alekslove said:
I have it working now. But one issue. The Kindle boots up normally now first into FFF then to android. Everything seems to be working fine except my battery shows 0% charge all the time. It does not charge. I unplug it and immediately shuts down. Anyone know what I can do to fix this? By the way, thanks for everyone who helped or contributed some input. By the way if anyone wants to know the method that work led was the Firekit method using Ubuntu Linux and the short test trick. I tried it several times even had some help on Teamviewer from a very helpful member. But after trying as few commands, it finally booted to the yellow triangle and after that I went to recovery and reinstalled CM9. So yeah everything seems to work now except the battery basically acts like its not even there.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1623244
Just flash FFF 1.4a, plug it into a USB Port on your computer, and take a nap. It should charge enough that you can reboot into your system and let you continue charging it normally.
same problem KHFD 8.9"
well
I didnt read everything carefully but succeded in rooting my KHFD 8.9"
then i tried to install FFF using KFU and then it restarted and i couldnt power it on
well i have tried using FireKit .. but it says waiting for OMAP device..
then i wanted to do the shorting trick !!
i have searched for two days and couldnt find any where the how to USB shorting of KHFD 8.9
please help I am getting frustrated..
kanchan.n.mahajan said:
well
I didnt read everything carefully but succeded in rooting my KHFD 8.9"
then i tried to install FFF using KFU and then it restarted and i couldnt power it on
well i have tried using FireKit .. but it says waiting for OMAP device..
then i wanted to do the shorting trick !!
i have searched for two days and couldnt find any where the how to USB shorting of KHFD 8.9
please help I am getting frustrated..
Click to expand...
Click to collapse
KFU is for the original kindle fire. Go post your problem in the KF2/KFHD QA. Most likely you have bricked your kindle. And factory cables don't work on that kf.
Whew. Didn't have to do anything elaborate on mine. Someone unplugged the wall wart and I didn't notice it for a few days. Held the power button for a minute or so as suggested above. Then tried a normal power on. That worked :good: Now I have it sitting in TWRP at 1%. When it gets over 10% I'll reboot into the OS.
THANK YOU!
Thepooch said:
Hold the power button for like a few mins couldn't hurt then try to power it on
Sent from my DROIDX using Tapatalk 2
Click to expand...
Click to collapse
THANKS! I thought..what the heck.. I will try what you suggested and it worked!
Hi All,
I recently unplugged my AFTV2's HMDI cable and then when replugging it, i cannot get video signal back.
I try to restart, and it doesn't get past the Amazon logo. No colour logo at all. It seems bricked form unplugging the HDMI cable?
To make things worse, this is the 3rd box I have had with this problem.
Any ideas what could be causing it? It has Firestarter and KODI installed.
Thanks
Same Here
That is interesting.
About an hour ago exchanged a 3 day old Fire TV at Best Buy for a new one because of this exact behavior. I thought it was defective. It worked for a couple of days, my kid unplugged it and re-plugged it a few times because the screen had gone black, and afterwards nothing. Booted to white logo, then went straight to black screen. I could connect to it with ADB, but it would no longer output video except for the initial white amazon logo at startup.
Also was running Firestarter and Kodi, nothing else (latest firmware, no root)
b1nuzz said:
Hi All,
I recently unplugged my AFTV2's HMDI cable and then when replugging it, i cannot get video signal back.
I try to restart, and it doesn't get past the Amazon logo. No colour logo at all. It seems bricked form unplugging the HDMI cable?
To make things worse, this is the 3rd box I have had with this problem.
Any ideas what could be causing it? It has Firestarter and KODI installed.
Thanks
Click to expand...
Click to collapse
galvanash said:
That is interesting.
About an hour ago exchanged a 3 day old Fire TV at Best Buy for a new one because of this exact behavior. I thought it was defective. It worked for a couple of days, my kid unplugged it and re-plugged it a few times because the screen had gone black, and afterwards nothing. Booted to white logo, then went straight to black screen. I could connect to it with ADB, but it would no longer output video except for the initial white amazon logo at startup.
Also was running Firestarter and Kodi, nothing else (latest firmware, no root)
Click to expand...
Click to collapse
Have you tried entering recovery and doing a factory reset?
See this thread here
I got this type of behavior and in fact it was my TV just unplug it and plug it back
My set up was originally through an amp, but I now have it plugged directly in to the TV. It makes no difference.
I only unplugged it because I was trying to solve the issue where all the blacks are crushed.
Amazon help just keep saying they are faulty and will replace them, but when I push them to try and offer a better solution as to why it keeps happening, they just tell me it won't happen again.
Dull.
gazdaman. said:
Have you tried entering recovery and doing a factory reset?
See this thread here
Click to expand...
Click to collapse
No matter how many times I try, and believe me, it's a lot of times, I cannot get it to activate recovery.
I also can't get it be seen with ADB. It's recognised on the network, but ADB can't connect.
Just to close this.
It was my AVR putting voltage down the HDMI and causing the unit to brick.
Nothing to do with the AFTV.
Sent from my iPhone using Tapatalk
Hello XDACommunity, I made an account just so I could ask you guys this question. I have a Kindle Fire HD6 4th generation and I rooted using Kingroot last night, all was good and dandy and this morning I left it with the screen on sitting on my desk, I walked away for a little bit and came back and the screen was off and non-responsive to anything. If I turn it on while its connected to my PC, a device named "MT65xx Preloader" shows up under "Unknown Devices" in Device Manager. This device will disappear after 3 -4 seconds and then re-appear after 3-4 seconds. Keep in mind that the screen does still not turn on. Thank you so much and have an awesome day
EDIT**
I do not have TWRP either. :/
_hunterd said:
Hello XDACommunity, I made an account just so I could ask you guys this question. I have a Kindle Fire HD6 4th generation and I rooted using Kingroot last night, all was good and dandy and this morning I left it with the screen on sitting on my desk, I walked away for a little bit and came back and the screen was off and non-responsive to anything. If I turn it on while its connected to my PC, a device named "MT65xx Preloader" shows up under "Unknown Devices" in Device Manager. This device will disappear after 3 -4 seconds and then re-appear after 3-4 seconds. Keep in mind that the screen does still not turn on. Thank you so much and have an awesome day
EDIT**
I do not have TWRP either. :/
Click to expand...
Click to collapse
http://forum.xda-developers.com/fire-hd
Sent from my KFFOWI using XDA Labs
I have a Gen 2 Fire TV. Completely stock, unrooted, locked boot loader. Only thing I side loaded was kodi. Plus I did those adb commands to hide the ad banner.
I don't know what happened but since last week I can't get my Fire TV to boot. Farthest I can get to is the white Amazon logo. Interestingly I can still connect via network adb. It just stays on the white Amazon logo, then I think it turns off after 2 hours or something (TV would go to the "no hdmi signal" screen). I unfortunately don't have the remote anymore. But I have flirc setup and a usb keyboard.
I tried the alt+print screen+i, but from what I've read this is needed right before the colorful Fire logo, which I can't get to.
I tried what the OP tried from this thread and I got the same errors he got. But mine didn't fix itself by just having it sit for a couple hours. And I'm on the latest version so I can't just wipe it, root, and reinstall the rom.
Curious an update came out last week I believe. I wonder if this issue is related to the update. Like a failed/corrupted update or something.
Any suggestions on what else I can try out? Thanks