I would like to share with you a modified OTA script HTC_Europe_1.29.401.7 to be flashed with clockworkmod recovery.
installation:
•download link
http://dl.dropbox.com/u/72778206/OT...1.28.401.9_release_259295wbmgoi0p47wgsfl6.zip
•push the zip on your sdcard
•check md 5
•flash through recovery
If the improvements also work for you please hit the thanks button.
PLEASE THIS IS NOT FOR EVERYONE
Flashing this on custom rom can give big issues flash only on nandroid backup of stock rom
N.B.
If you have a OTA, Download OTA zip from one-x and copy to PC, edit the zip file META-INF\com\google\android\updater-script , Delete line >
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" ,
"22222222" , "33333333" , "44444444" , "55555555" , "66666666" ,
"77777777" , "88888888" , "99999999" , "HTC__622") == "t");
then save and try again
p.s. Please use notepad ++
what makes it different than normal updates? can it be flashed on phones that are network branded/locked for example?
Can it update radio?
just tried to flash it, it failed, so im not sure what this will do or whats modified about it.
Hm, im sceptical about this, could be malware?
Drefsab said:
what makes it different than normal updates? can it be flashed on phones that are network branded/locked for example?
Click to expand...
Click to collapse
No you can flash only on unlocked phone with custom recovery. No mallware! This is original file where i delete only some script that verify CID.
For me this OTA this file don't update also radio but only system file. Is for user that wan't new radio
hi,
now I'm with ARHD 5.0 can flash directly your zip and then reinstall ARHD ?
or need to go back to stock rom ?
tks for help
@jonata ARHD as same effect on system file so no flash this file. If you search radio on hboot you can see that radio is not upgrade even if mike tell yes.
this file is for people that do't want new radio but only new system file on 1.28 base
to use this you need to have the stocks files (those which will be updated) from 1.28 rom (and the ROM in place has to be the one for this OTA).
As the ASSERT are still in the update-script you have to be sure also that you have all the files which will be updated.
@acer73, you should tell for which device rom is this OTA 1.28.401.9 ?
allHello i did thé steps all ok except now I lost the recovery ....
I clear cash flash again interim and nothing
Help please
What if I want to update my radio as well?
Sent from my HTC One X using Tapatalk 2
DONT INSTALL IT IF YOU HAVE A CUSTOM ROM RUNNING, THIS MAY CAUSE A PROBLEM WITH THE BOOT.IMG.
Sent from my HTC One X using XDA
acer73 said:
@jonata ARHD as same effect on system file so no flash this file. If you search radio on hboot you can see that radio is not upgrade even if mike tell yes.
this file is for people that do't want new radio but only new system file on 1.28 base
Click to expand...
Click to collapse
The description is in OTA. New system file for 1.28 Europe Base
wolfraim said:
DONT INSTALL IT IF YOU HAVE A CUSTOM ROM RUNNING, THIS MAY CAUSE A PROBLEM WITH THE BOOT.IMG.
I agree with you. The zip overwrite boot.img with 1.29 and rom can have is boot.img
Click to expand...
Click to collapse
JEZ69 said:
allHello i did thé steps all ok except now I lost the recovery ....
I clear cash flash again interim and nothing
Help please
Click to expand...
Click to collapse
Sorry, but this file can't overwrite recovery. You can flash with fastboot cmw recovery o run cmw recovery putting cwm_recvovery. imf in a directory with fastboot and use this command (can you create a .bat file)
fastboot.exe boot cwm_recovery.img
fastboot reboot
If you want you can use http://forum.xda-developers.com/showthread.php?t=1620755 to automate process.
good luck
U should give more info..
This is NOT for Everyone..
Flashing this on custom rom can give big issues
@ vallandil. Thanks I edit first post
Super!!! Thx
if this is a modded "original" OTA update, it should only work on 1.28 odexed roms...
not custom deodexed ones.
acer73 said:
Sorry, but this file can't overwrite recovery. You can flash with fastboot cmw recovery o run cmw recovery putting cwm_recvovery. imf in a directory with fastboot and use this command (can you create a .bat file)
fastboot.exe boot cwm_recovery.img
fastboot reboot
If you want you can use http://forum.xda-developers.com/showthread.php?t=1620755 to automate process.
good luck
Click to expand...
Click to collapse
sorry but not working ....?... i must wait for ruu 1.29 for fresh install
i tried all recovery and nothing always back to htc recovery with the danger symbol
Related
I come from the SGAce forums where flashing is just download-and-flash method and now I wanna try the HTC One X and use ARHD Rom (used it on my friend's Gnexus) And I really don't know what to do! It's just too complicated for me
My bootloader is already unlocked and it's only a test phone I borrowed cause I'm not sure what to buy yet
If anyone can help Here as well as ow to flash the rom and the .bat file
THANK YOU A LOT
First you need unlock bootloader to flash custom recovery. Follow this guide for example how to do it.
After recovery, make a backup of your current rom.
After backup, download ARHD 5.1.0 and superwipe script to your sdcard, after you got them both flash boot.img from ARHD thread. (Download this & run "install-boot.bat") This is mandatory because without S-OFF one can't flash boot.img from recovery, and without boot.img flashed one can't boot their device or it won't work properly.
Then to the basic flashing process, boot to recovery and flash superwipe script and afterwards flash ARHD and you're good to go!
BTW, you don't need to flash firmware files
Nubzori said:
First you need unlock bootloader to flash custom recovery. Follow this guide for example how to do it.
After recovery, make a backup of your current rom.
After backup, download ARHD 5.1.0 and superwipe script to your sdcard, after you got them both flash boot.img from ARHD thread. (Download this & run "install-boot.bat") This is mandatory because without S-OFF one can't flash boot.img from recovery, and without boot.img flashed one can't boot their device or it won't work properly.
Then to the basic flashing process, boot to recovery and flash superwipe script and afterwards flash ARHD and you're good to go!
BTW, you don't need to flash firmware files
Click to expand...
Click to collapse
so I will only run the .bat file or use command prompt?
Doo:DAce said:
so I will only run the .bat file or use command prompt?
Click to expand...
Click to collapse
In which part? When u flash boot.img you only need to run .bat file and press any button when device is in usb fastboot mode
Just another 13-Year old non-developer member running around the forums like a boss
Nubzori said:
In which part? When u flash boot.img you only need to run .bat file and press any button when device is in usb fastboot mode
Click to expand...
Click to collapse
Ok im confused. How do you flah those two things?
Doo:DAce said:
Ok im confused. How do you flah those two things?
Click to expand...
Click to collapse
Download the boot.img from ARHD thread, it has instructions inside
Hi, i´m just new on Android. The HTC One X is my first Smartphone and i want to install the Android Revolution HD 6.0 rom. I know this: First i need unlocked via Htcdev and install SuperSU. That is clear for me.
But in the instruction for ARHD 6.0 says, that i need to flash the boot.img of the rom first and then install the rom. In the tutorial are 3 files: ARHD 6.0 - ARHD super wipe and flash_boot_6.0.0. In the last find a READ ME: I need to run the install-boot-windows.bat and then install the ARHD in Recovery.
That is where i´m confused.
Must i the boot.img of the ARHD One X 6.0.0 flash or run the intall-boot-windows.bat. Or both?
I know, are many tutorials but i have this problem and it´s my first time with Android and ROMS.
BTW i´ve install the last OTA (1.29.401.11), i live in germany and my phone ist unbranded. There is a problem with this. Must i have the 1.28.401.9?
dabristhn said:
Hi, i´m just new on Android. The HTC One X is my first Smartphone and i want to install the Android Revolution HD 6.0 rom. I know this: First i need unlocked via Htcdev and install SuperSU. That is clear for me.
But in the instruction for ARHD 6.0 says, that i need to flash the boot.img of the rom first and then install the rom. In the tutorial are 3 files: ARHD 6.0 - ARHD super wipe and flash_boot_6.0.0. In the last find a READ ME: I need to run the install-boot-windows.bat and then install the ARHD in Recovery.
That is where i´m confused.
Must i the boot.img of the ARHD One X 6.0.0 flash or run the intall-boot-windows.bat. Or both?
I know, are many tutorials but i have this problem and it´s my first time with Android and ROMS.
BTW i´ve install the last OTA (1.29.401.11), i live in germany and my phone ist unbranded. There is a problem with this. Must i have the 1.28.401.9?
Click to expand...
Click to collapse
Follow these steps:
1. Unlock via HTC Dev.
2. Install Clockwork Recovery
3. Boot in to the Bootloader and Flash boot.img in ARHD thread via Fastboot USB.
4. Boot into Recovery
5. Flash Superwipe Script in ARHD thread
6. Flash ARHD 6.0.0
7. Exit Recovery and Restart.
A full step by step guide can be found in the Dev section.
dr9722 said:
Follow these steps:
1. Unlock via HTC Dev.
2. Install Clockwork Recovery
3. Boot in to the Bootloader and Flash boot.img in ARHD thread via Fastboot USB.
4. Boot into Recovery
5. Flash Superwipe Script in ARHD thread
6. Flash ARHD 6.0.0
7. Exit Recovery and Restart.
A full step by step guide can be found in the Dev section.
Click to expand...
Click to collapse
Thanks man, i will try it.
One more question. The file Flash_boot.6.0.0. What is it? Do i need it?
dabristhn said:
Thanks man, i will try it.
One more question. The file Flash_boot.6.0.0. What is it? Do i need it?
Click to expand...
Click to collapse
Yes you do need it and it needs to be flashed prior to flashing the rom. Simply open the zip file once its downloaded, put your phone into fastboot-usb and run the install-windows.bat file. The boot.img file is then automatically flashed.
The boot.img is packaged in the zip/rar file, which contains a batch file that somewhat automates the boot flash. So, the boot.img and the flash boot 6.0 are one and the same step.
Yea you need it.
But you don't flash it using CWR, instead you unzip on your pc and run the script for your OS. In windows its a bat file that flashes the boot.img to your phone
EDIT: hehe need to learn to reload the site before replying =P
fredfb said:
Yea you need it.
But you don't flash it using CWR, instead you unzip on your pc and run the script for your OS. In windows its a bat file that flashes the boot.img to your phone
EDIT: hehe need to learn to reload the site before replying =P
Click to expand...
Click to collapse
All right. I´m ready to do it. thanks for all. It was very helpfull
dr9722 said:
Yes you do need it and it needs to be flashed prior to flashing the rom. Simply open the zip file once its downloaded, put your phone into fastboot-usb and run the install-windows.bat file. The boot.img file is then automatically flashed.
Click to expand...
Click to collapse
I did it and its working! Maybe try later with a new kernel.
how long will it take for first boot?
please help because its already been 30 minutes and the screen is still on the "htc one" logo.
pratik4562 said:
please help because its already been 30 minutes and the screen is still on the "htc one" logo.
Click to expand...
Click to collapse
Don't be panic . Just goto fastboot and flash the respective boot.img for the Rom you have flashed.
First erase the cache and flash the boot.img
Sent from my HTC One X using Tapatalk 2
Hi,
I got an latest software update for my phone.Updating it will brick my device?Sorry coz im new to android....as my device is rooted..so updating will damage my phone...??
No you just have to grab ota rootkeeprr from the playstore from it backup your root then put temporarily unroot then flash the stock recovery if you had cmw installed then install the update then restore the root and flash the recovery(cmw)
donhashem.dh said:
No you just have to grab ota rootkeeprr from the playstore from it backup your root then put temporarily unroot then flash the stock recovery if you had cmw installed then install the update then restore the root and flash the recovery(cmw)
Click to expand...
Click to collapse
thanks but i dont know weather i have cmw...i have rooted my phone using hasoon2000 toolkit...i dont care if my phone gets unrooted if i update my software...im worried weather it will get bricked...
To know if you have recovery you boot into bootloader then select recovery if phone reboots then you don't have recovery but if you dp it will enter like a program that means you have recovery so you have to flash the stock one try it out and reply
donhashem.dh said:
To know if you have recovery you boot into bootloader then select recovery if phone reboots then you don't have recovery but if you dp it will enter like a program that means you have recovery so you have to flash the stock one try it out and reply
Click to expand...
Click to collapse
ya i did...ClockworkMod recovery is coming.what to do now?
donhashem.dh said:
To know if you have recovery you boot into bootloader then select recovery if phone reboots then you don't have recovery but if you dp it will enter like a program that means you have recovery so you have to flash the stock one try it out and reply
Click to expand...
Click to collapse
i installed ota root keeper and i temporarily unrooted my phone.now can i download the update??
Read this : http://forum.xda-developers.com/showthread.php?t=1705484
It is wise to save the OTA.zip somwhere before you proceed the updating process. The stock boot & recovery img inside the firmware.zip inside the OTA.zip will helps you later on if the updating process is stuck in between.
And importantly, make a nandroid backup for the newly updated software version in case you need to revert to stock and there is no RUU available.
Now you just have to flash stock recovery
http://forum.xda-developers.com/showthread.php?t=1748684
Use this link
donhashem.dh said:
Now you just have to flash stock recovery
http://forum.xda-developers.com/showthread.php?t=1748684
Use this link
Click to expand...
Click to collapse
Hmm... just flash stock recovery ??
so how is your update problem : http://forum.xda-developers.com/showthread.php?t=1854590
But I didn't flash the stock kernel cz I wasn't on a custom one in still on stock
watch you backs
and keep your noses clean
I'm out.................................
Mr.Luigi
donhashem.dh said:
But I didn't flash the stock kernel cz I wasn't on a custom one in still on stock
watch you backs
and keep your noses clean
I'm out.................................
Mr.Luigi
Click to expand...
Click to collapse
i downloaded the recovery file...how do i falsh it???plss help me out of this :/
Create a folder named ab in drive c and in that folder put fastboot.exe and the recovery.img if it doesn't have that name rename it to recovery onlyy then go to cmd and type cd C:\ab (enter)
Fastboot flash recovery recovery.img
THat's it
watch you backs
and keep your noses clean
I'm out.................................
Mr.Luigi
donhashem.dh said:
But I didn't flash the stock kernel cz I wasn't on a custom one in still on stock
watch you backs
and keep your noses clean
I'm out.................................
Mr.Luigi
Click to expand...
Click to collapse
So ... is your updating problem solved ? Just asking when I see you trying to help other that may lead to the same problem that you have.
donhashem.dh said:
Create a folder named ab in drive c and in that folder put fastboot.exe and the recovery.img if it doesn't have that name rename it to recovery onlyy then go to cmd and type cd C:\ab (enter)
Fastboot flash recovery recovery.img
THat's it
watch you backs
and keep your noses clean
I'm out.................................
Mr.Luigi
Click to expand...
Click to collapse
thank u so much..can u please give me the downloadlink for fastboot.exe
But your seeing if I'm saying anything wrong you should tell me why did you find anything wrong??
watch you backs
and keep your noses clean
I'm out.................................
Mr.Luigi
ckpv5 said:
So ... is your updating problem solved ? Just asking when I see you trying to help other that may lead to the same problem that you have.
Click to expand...
Click to collapse
Hii
Actually i didnt flash any custom ROM or kernal im running on stock rom i just rooted my phone..my question is if i update my software without with out flashing the stock recovery will my phone get bricked?
If you have android SDK you'll find it in tools folder if you don't here's a link http://www.wuala.com/neroyoung/XDA ROM Dev Tools/fastboot.rar/
watch you backs
and keep your noses clean
I'm out.................................
Mr.Luigi
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
It won't get bricked actually it won't work
watch you backs
and keep your noses clean
I'm out.................................
Mr.Luigi
samy.iglesias said:
Hii
Actually i didnt flash any custom ROM or kernal im running on stock rom i just rooted my phone..my question is if i update my software without with out flashing the stock recovery will my phone get bricked?
Click to expand...
Click to collapse
As you said, you already have a CWM recovery, then you need a stock recovery flashed first. The next question is which stock recovery ? The one that listed on that thread is 1.56 version which is meant for hboot 1.16. So check what is you hboot now ? If it is still 1.16, then you can use that recovery. If it is 1.17, you need a 1.58 or 2.09 recovery.
ckpv5 said:
As you said, you already have a CWM recovery, then you need a stock recovery flashed first. The next question is which stock recovery ? The one that listed on that thread is 1.56 version which is meant for hboot 1.16. So check what is you hboot now ? If it is still 1.16, then you can use that recovery. If it is 1.17, you need a 1.58 or 2.09 recovery.
Click to expand...
Click to collapse
thank you so much,my software number is 2.09.720.1 so which recovery file should i download?
thank you.
There is none for 2.09.720.1 available in this thread : http://forum.xda-developers.com/showthread.php?t=1748684
So the best bet that I can suggest is save the OTA.zip as I mentioned earlier and use the recovery that comes with the OTA.
Or you can try 2.09.707.1 that I posted here http://forum.xda-developers.com/showpost.php?p=30809441&postcount=11 but not so sure whether it will work or not but it should.
Hi there,
i dont know what to do...
I have a german htc one x from Vodafone.
I tried TWRP and CWM Recovery to install the new Update to 3.14.161.27 but i always get "Error 7" and the installation aborts.
System info:
Adroid: 4.0.4
Software: 2.17.161.4
CID: VODAP102
HBOOT: 1.12.0000
Recovery: TWRP 5.8.4.0
Can you help me and tell me how to fix my Problem.
King regards
Peter
What do you mean, are you on stock rom and tried to do the official update with the custom recovery ?
If you have 100% stock rom, stock boot.img and stock recovery you can update
http://db.tt/U5CK4noo
Flash this one and try again. Keep the bootloader unlocked .... Its no problem
I tried your Recovery but it didnt worked..
I have stock rom, stock recovery (now) and i think i have stock boot.img.
if my boot.img is the prob how can i change it?
i used the Hasoon200 tool to root my phone nothing else was done
very big thanks for your help
If you are really sure you have the nandroid backup of your original stock rom the stock boot.img should be inside that nandroid backup folder !
If you made any changes to the stock rom like deleting system apps or any other bloatware then the update will also fail
peterlein said:
I tried your Recovery but it didnt worked..
I have stock rom, stock recovery (now) and i think i have stock boot.img.
if my boot.img is the prob how can i change it?
i used the Hasoon200 tool to root my phone nothing else was done
very big thanks for your help
Click to expand...
Click to collapse
You have to flash the boot.img from fastboot
simply put the boot.img in the fastboot folder and run the following commands
Code:
fastboot boot boot.img
kskendsup said:
You have to flash the boot.img from fastboot
simply put the boot.img in the fastboot folder and run the following commands
Code:
fastboot boot boot.img
Click to expand...
Click to collapse
That's a wrong command, its
Fastboot flash boot boot.img
Mr Hofs said:
That's a wrong command, its
Fastboot flash boot boot.img
Click to expand...
Click to collapse
My bad...!! I was in a hurry..!!
Sorry OP...follow the correct command..!!
Ok,... i might deleted some system apps 0_o damn it i didnt know that this can make such big problems...
can deactivated system apps cause this problem too ?
What do you mean by deactivated ? Removed .... Yes that's a problem .....
Mr Hofs said:
What do you mean by deactivated ? Removed .... Yes that's a problem .....
Click to expand...
Click to collapse
i reactivated all... still dont works :-/ i think im running out of opinions because i dont now if i realy uninstalled a system app and if yes witch one :crying:
this happens if a not advised person is trying to root hios phone
That's probably the problem, the other problem is that i didn't see the matching ruu on HTCruu.com and i also didn't see the nandroid backup you need in the nandroid backup collection thread.
You have an option to upgrade to jellybean ! Flash the firmware the unofficial way , your cid is supported and after flashing the firmware you have the updated hboot to flash JB roms
I give you the link in a minute
---------- Post added at 11:09 PM ---------- Previous post was at 11:06 PM ----------
Here you can download the firmware matching your cid
http://forum.xda-developers.com/showthread.php?t=1957376
I have to check for a detailed guide, I never done this myself so I don't know to much about it
But after that you are stuck to a custom rom......
ok very big thanks, i will think about it and i will see what i do tomorrow...
but very very big thanks for the fast help... i remeber for me : "never delete system apps you idiot"
Yeah well .... To late now
Here i have the firmware flasher , you have to download the firmware in the first link i gave you and this link
http://forum.xda-developers.com/showthread.php?t=1924003
Has the tool where you have to put the firmware in.
Don't ask me how this works exactly, never done this myself but read the OP of the threads really carefully !
Wohoo its working
I have found my system backup recovered it and the update works
big thanks for your help,... I would never have come to a missing system app
:laugh:
and sry for my bad english
Thx
Peter
Very good !!! :thumbup:
Have fun !
CASE CLOSED !
hello there
i am on stock rom 4.0.3 with stock recovery and everything is stock except i unlocked my phone using htcdev
now i want a OTA from this thread http://forum.xda-developers.com/showthread.php?t=1606676
i got the right one which is orang216 and my cid is orang216(via fastboot oem readcid)
but after following the instruction there i can't install it i always get cid error at start i also tried deleting this line from updater-script
Code:
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" ,
"22222222" , "33333333" , "44444444" , "55555555" , "66666666" ,
"77777777" , "88888888" , "99999999" ,
"ORANG216") == "t");
but no luck still same cid error
btw it should be noted i am not in switzerland but in bangladesh and my carrier will NEVER auto OTA my phone
so plzzzzzzz helppppppp :crying:
Are you sure you followed every step from that thread?
From that thread:
How to Install OTA:
1. Download OTA file
2. Rename it 'update.zip' (not update.zip.zip)
3. Put on root of SD card
4. Boot phone into HBOOT
5. Select recovery
6. Select Update from Zip
7. Select 'install update.zip from SD card'
8. Press power to select
Click to expand...
Click to collapse
vin4yak said:
Are you sure you followed every step from that thread?
From that thread:
Click to expand...
Click to collapse
hey your the one that helped me in my other thread and yes i followed all the steps but some steps dont show up in my stock recovery
like update from zip option doesn't appear (i have to select power+up to get options and i select install update from externel storage and then i get cid error
so what to do???
aseferfan said:
hey your the one that helped me in my other thread and yes i followed all the steps but some steps dont show up in my stock recovery
like update from zip option doesn't appear (i have to select power+up to get options and i select install update from externel storage and then i get cid error
so what to do???
Click to expand...
Click to collapse
Yes, that's because the steps mentioned there are for CWM recovery AFAIK...
Which recovery do you have? If you have twrp then the steps are similar... in TWRP window there must be something named as "flash update" under install zip from sd... I haven't used TWRP much so can't tell you exactly...
vin4yak said:
Yes, that's because the steps mentioned there are for CWM recovery AFAIK...
Which recovery do you have? If you have twrp then the steps are similar... in TWRP window there must be something named as "flash update" under install zip from sd... I haven't used TWRP much so can't tell you exactly...
Click to expand...
Click to collapse
i just had CWM 5.8.4.0 then got into stock 1.29 and again few moments ago i upgraded to touch CWM( lol 1 day ago i didnt understand any of this but now its getting pretty easy though i am getting more and more tensed about bricking my phone)
AND I TRIED TO FOLLOW THE STEPS WITH ALL THREE RECOVERIES but NOTHING happend in stock i get cid none error and in CWMs i get status 7 error so what should i do now????should i give up and live with my stock ics??:crying::crying:
In that other thread, I had told you this is a very different process.. and upgrading the hboot manually will be easy...
Just head over to that thread and follow matt's steps with the link I had given...
vin4yak said:
In that other thread, I had told you this is a very different process.. and upgrading the hboot manually will be easy...
Just head over to that thread and follow matt's steps with the link I had given...
Click to expand...
Click to collapse
i just upgraded my hboot to 1.36 and it seems radio is displaying correctly but i can get into my stck isc 4.0.3 now its stuck on htc one logo please helpppppppppp
aseferfan said:
i just upgraded my hboot to 1.36 and it seems radio is displaying correctly but i can get into my stck isc 4.0.3 now its stuck on htc one logo please helpppppppppp
Click to expand...
Click to collapse
Do the following command : fastboot erase cache... and then try to reboot... if it still stuck on the HTC logo, then it's time to flash a rom..
I'm not able to find any nandroid backup for your CID,,, if your want to go stock post your upgraded 'version-main' so that we can check whether there's a RUU for you or not...
Either that or you can flash a custom ROM! Which one do you want to go with? stock or custom rom? Please tell us so that we can guide you from this point..