Hi,
Im obviously the biggest idiot on here and I need some help.
Last night whilst formatting my phone through cwm I was tired and accidentally hit format SD Card and by the time I rebooted it was too late.
Now I dont have any Roms to use. The SD Card is completely blank
Is there any way to overcome this issue or do I have to buy a new phone?
p2nv said:
Hi,
Im obviously the biggest idiot on here and I need some help.
Last night whilst formatting my phone through cwm I was tired and accidentally hit format SD Card and by the time I rebooted it was too late.
Now I dont have any Roms to use. The SD Card is completely blank
Is there any way to overcome this issue or do I have to buy a new phone?
Click to expand...
Click to collapse
There should be a few workarounds here. I take it you can still get to fastboot on your phone? (hold power and vol down, then enter fastboot by using the power key). If so, put the rom you're trying to flash in your platform\tools folder of your computer. Then open a command prompt and try the following command:
cd C:\location of your platform\tools folder
adb devices (you should get a series of numbers pop up)
adb push romfilename.zip/sdcard/ (replace romfilename.zip with your rom, and don't forget the .zip)
adb reboot
You may also have to do a factory reset afterwards in recovery. Hopefully this helps!
RUU is your friend
Sent from my HTC One X using XDA
thegregulator said:
There should be a few workarounds here. I take it you can still get to fastboot on your phone? (hold power and vol down, then enter fastboot by using the power key). If so, put the rom you're trying to flash in your platform\tools folder of your computer. Then open a command prompt and try the following command:
cd C:\location of your platform\tools folder
adb devices (you should get a series of numbers pop up)
adb push romfilename.zip/sdcard/ (replace romfilename.zip with your rom, and don't forget the .zip)
adb reboot
You may also have to do a factory reset afterwards in recovery. Hopefully this helps!
Click to expand...
Click to collapse
thank you so much for your help.
i can still get fastboot
do i push the files through to the phone through fastboot with cmd? or do i need a different set of tools?
Yep, RUU is the way forward. Use fastboot to flash the stock recovery, lock the bootloader and then run your RUU
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
thegregulator said:
There should be a few workarounds here. I take it you can still get to fastboot on your phone? (hold power and vol down, then enter fastboot by using the power key). If so, put the rom you're trying to flash in your platform\tools folder of your computer. Then open a command prompt and try the following command:
cd C:\location of your platform\tools folder
adb devices (you should get a series of numbers pop up)
adb push romfilename.zip/sdcard/ (replace romfilename.zip with your rom, and don't forget the .zip)
adb reboot
You may also have to do a factory reset afterwards in recovery. Hopefully this helps!
Click to expand...
Click to collapse
Won't work if in fastboot, adb commands only work if booted into Android
EddyOS said:
Yep, RUU is the way forward. Use fastboot to flash the stock recovery, lock the bootloader and then run your RUU
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
Won't work if in fastboot, adb commands only work if booted into Android
Click to expand...
Click to collapse
i am totally confused now. sorry im a bit of a noob with certain aspects.
EddyOS said:
Yep, RUU is the way forward. Use fastboot to flash the stock recovery, lock the bootloader and then run your RUU
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
Won't work if in fastboot, adb commands only work if booted into Android
Click to expand...
Click to collapse
sorry what do you mean booted into android?
and im gathering adb commands is part of sdk tools?
if one of you guys could please write a simple set of steps for me to follow and what tools to download and which rom to download i would really appreciate it.
god bless you and xda
p2nv said:
if one of you guys could please write a simple set of steps for me to follow and what tools to download and which rom to download i would really appreciate it.
god bless you and xda
Click to expand...
Click to collapse
I guess adb won't work in fastboot. Sorry for the bad advice. I've never used fastboot to flash an RUU file. I'm sure one of these guys will be able to help you.
p2nv said:
if one of you guys could please write a simple set of steps for me to follow and what tools to download and which rom to download i would really appreciate it.
god bless you and xda
Click to expand...
Click to collapse
Go in the thread below
http://forum.xda-developers.com/showthread.php?t=1590884
Then go to page 10 and post #94.
I think this might help you
All credit to Monrad ofcourse
Mind you I have not done this myself yet but it should work for you.
Try it on your own risk (although there should be none involved)
THANK YOU
thank you so much to all of you. you really are great help. long live xda
p2nv said:
thank you so much to all of you. you really are great help. long live xda
Click to expand...
Click to collapse
Best way we can mate
Hope all goes well for you.
DanteGR said:
Best way we can mate
Hope all goes well for you.
Click to expand...
Click to collapse
yep. ive locked bootloader and i'm downloading ruu right now.
thought my phone was bricked for eternity lmao.
thanks again
wrong place for this question
guys i still have had no luck
the ruu wont work in fastboot.
keeps saying connect device with usb and i have.
im running out of ideas.
please help
Try and change it from fastboot to bootloader and see what happens.
Sent from my HTC One X using XDA
ste1164 said:
Try and change it from fastboot to bootloader and see what happens.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
I have tried that too mate, I guess the only thing I probably can do is hope that CWM will be able to mount usb in the near future. In the meantime I don't have a phone which is killing me.
Recovered
Ok so here is what happened,
After accidentally formatting everything including SD Card contents I thought my phone was permanently bricked until cwm had external usb functioning.
So I tried using the RUU but kept getting error message that USB wasn't connected even though it was.
If anyone else is in this situation in the future make sure you install the HTC One X USB drivers onto your windows and then boot into fastboot not hboot.
I couldnt find the USB Drivers but thanks to hasoon2000 for his beautiful tool 'HTC One X All-In-One Toolkit V1.0' which can be found at http://forum.xda-developers.com/showthread.php?t=1604439 i was able to install the drivers. I then booted into fastboot and completed the process.
Thank all you guys for your help in this matter
Related
---- PLEASE MOVE POST TO WILDFIRE S - Questions section. wrong post sorry!!----
Hi everyone!
First of all, thank you for taking the time to read this!
I have tried to do research on my problem but can't solve it...
The problem is that i can't get into recovery to backup my stock rom.
Specs: HTC Wildfire S, marvel A510e, S-on, Bootloader unlocked, Rooted, Radio-7.54.39.28M, Andriod 2.3.5, HTC sence: 2.1, ClockworkMod 5.0.2.8, Super SU.
I followed the guide: "How to root the Wildfire S with S-ON"on Andriod forums by CafeKampuchia, thumbs up for him It got me this far but, now I want to do the thing for which I rooted my phone in the first place: Installing a costum ROM. Therefore I want to backup my stock ROM.
Installed CWM ROM manager, if use backup current ROM option, the phone reboots and i get the HTC letters on my screen these. After a few sec's they dissapear and my screen goes black and my buttons on the bottom light up. I can touch those but nothing happens besides that it buzzes.... When I it boot the normal way again and use the option 'manage and restore backups' in CMW ROM manager, it shows that there has been made a backup. Not shure if I can trust it though....
When I open in HBOOT (1.09.0099) and push recovery the same thing happens. When I boot the normal way and try to boot into recovery trough CWM ROM manager same thing happens again.
I saw a other topic http://forum.xda-developers.com/showthread.php?t=1213229&page=2 i tried to flash this recovery to see if a older version might work, but now i have got a problem flashing... See picture: View attachment 1031874. Anyway that is not my main problem, what i really want to make it clear: is to back up my stock ROM.
Many thanks in advantage!
wait for device，you boot your phone to fastboot，and is works
---------- Post added at 09:43 AM ---------- Previous post was at 09:40 AM ----------
I think your hboot is very high， you downgrade it to 1.030000 may be works.
Hey pal if I was you I wouldn't use rom manager, I've known it to have issues over both wildfires. Turn off your phone the normal way. Pull out the battery for 10-20 seconds or so, put it back in and hold volume down + power. Once your hboot is finished scanning the sdcard scroll down to recovery and select it with power. You should go into clockwork mod. Then scroll again with the rockers down to backup and hit it you can do as many backups as your sdcard will carry. So do that and you should have one you can trust. Also before you install your new custom rom read the main page throughout to see if it needs set up in any specific way, like with a special sdcard partition or something. And most important don't forger to wipe your cache, dalvik cache and factory reset the Device from clockwork mod recovery ! This will avoid bootloops good luck
sent from my android powered beast!
It would be best if you were to ask in the Wildfire S forum...just saying.
Downgrade HBOOT will downgrade Android?
gq455402012 said:
wait for device，you boot your phone to fastboot，and is works
---------- Post added at 09:43 AM ---------- Previous post was at 09:40 AM ----------
I think your hboot is very high， you downgrade it to 1.030000 may be works.
Click to expand...
Click to collapse
Hey, I'm would like to try this but when i searched for a tutorial one said: "In this tutorial, I will show you how to downgrade Any HBOOT and Radio to "around" HBOOT 1.03.001 and Radio 7.48.36.1 or less with S-ON. How amazing is that!
Disclaimer: I am not responsible for any damage that you bring to your android device! This will Downgrade you to Android 2.3.3!" Found in: http://forum.xda-developers.com/showthread.php?p=25255527
As it says i will downgrade my android aswell, this does not work for me because my main goal is to back up my stock ROM. correct me if i'm wrong.
heavy_metal_man said:
Once your hboot is finished scanning the sdcard scroll down to recovery and select it with power. You should go into clockwork mod. Then scroll again with the rockers down to backup and hit it you can do as many backups as your sdcard will carry.
Click to expand...
Click to collapse
Hey Thanks!
As you can read,
When I open in HBOOT (1.09.0099) and push recovery the same thing happens.
Click to expand...
Click to collapse
i tried to get into recovery trough HBOOT already.
The other tips are usefull
Try booting to recovery via adb or terminal emulator.In both cases the code is
su
reboot recovery
Sent from my Optimus Me using xda premium
Your bootloader cannot be the issue. Go to here. And try there install recovery options. Also what happens if you cold boot the device with volume up + power?
http://forum.xda-developers.com/showthread.php?t=1325730
[INDEX] roms/recovery/guides/kernel/root/...
sent from my android powered beast!
adb reboot recovery
nerot said:
Try booting to recovery via adb or terminal emulator.In both cases the code is
su
reboot recovery
Sent from my Optimus Me using xda premium
Click to expand...
Click to collapse
Tried booting via adb but it says: error: device not found.
This is weird because i flashed recovery cmw just before and that worked perfectly fine... SDK works fine as far as i know. su command doenst work either.
install recovery options?
heavy_metal_man said:
Your bootloader cannot be the issue. Go to here. And try there install recovery options. Also what happens if you cold boot the device with volume up + power?
http://forum.xda-developers.com/showthread.php?t=1325730
[INDEX] roms/recovery/guides/kernel/root/...
sent from my android powered beast!
Click to expand...
Click to collapse
Ok thats good to know, about the bootloader so no downgrade?
What do you mean with intall recovery options? I can't find such a manual there...
Cold boot with volume up + power makes my device boot up as usual.
I tried to install
HTML:
http://forum.xda-developers.com/showthread.php?t=1213229
other version of cmw recovery, by following the guide instead of flashing. That gave me the following error.
CID incorret! Update fail! Press <power. to reboot.
ok how did you install your recovery to install super user? did you just use rom manager to do it? as far as i know it only installs a tempoary recovery. which would explain why you are only getting to it through rom manager. ok do you have adb installed onto your pc?
ok take the pg76img.zip attached to this post and put it on the root of your sdcard. then boot into bootloader (not fastboot) and your phone should say it found an update. flash it and it will install clockworkmod to your phone properly. then remove the pg76img.zip from your sdcard and boot back into bootloader, select recovery and with any luck you`ll be sorted. then follow my post above and you`ll be sorted pal
then, go to here and thank alquez for the recovery http://forum.xda-developers.com/showthread.php?t=1213229
samkuiper9 said:
Tried booting via adb but it says: error: device not found.
This is weird because i flashed recovery cmw just before and that worked perfectly fine... SDK works fine as far as i know. su command doenst work either.
Click to expand...
Click to collapse
If usb debugging isnt the problem then use terminal emulator from the phone itself, again with the the same lines.
Sent from my Optimus Me using xda premium
Terminal emulator: not permited
nerot said:
If usb debugging isnt the problem then use terminal emulator from the phone itself, again with the the same lines.
Sent from my Optimus Me using xda premium
Click to expand...
Click to collapse
Thanks, tried this but when i type in reboot recovery the terminal emulator says: not permited!
What to do?
samkuiper9 said:
Thanks, tried this but when i type in reboot recovery the terminal emulator says: not permited!
What to do?
Click to expand...
Click to collapse
Are you sure you typed in "su" before "reboot recovery"?
nejc121 said:
Are you sure you typed in "su" before "reboot recovery"?
Click to expand...
Click to collapse
Absolutely Super SU asked to grant permission and i did..
freezing emulator
samkuiper9 said:
Tried booting via adb but it says: error: device not found.
This is weird because i flashed recovery cmw just before and that worked perfectly fine... SDK works fine as far as i know. su command doenst work either.
Click to expand...
Click to collapse
Sorry made a mistake here, i tried to use adb commands while in hboot. When i tried it when the phone was on as usual i could use SU command and the # logo showed up bit than my terminal froze and i couldn't write anything else.
Than i tried it again this time only using the commands as follows:
cd c:\android
adb shell
su
reboot recovery
Difference is that the first time i typed: adb shell su. all together this freezes it up...
Anyhow it sitll doens't work.. i get an empty line in cmd, thats all..View attachment 1033568
But this could be because now a flash of a recovery img doens't work it gives: Waiting for device...
heavy_metal_man said:
ok how did you install your recovery to install super user? did you just use rom manager to do it? as far as i know it only installs a tempoary recovery. which would explain why you are only getting to it through rom manager. ok do you have adb installed onto your pc?
Click to expand...
Click to collapse
I didn't use rom manager, i used a recovery img from CWM: ahttp://download.clockworkmod.com/recoveries/nd flashed it with sdk, trough cmd promt. So yes adb files are in place and working.
heavy_metal_man said:
ok take the pg76img.zip attached to this post and put it on the root of your sdcard. then boot into bootloader (not fastboot) and your phone should say it found an update. flash it and it will install clockworkmod to your phone properly. then remove the pg76img.zip from your sdcard and boot back into bootloader, select recovery and with any luck you`ll be sorted. then follow my post above and you`ll be sorted pal
then, go to here and thank alquez for the recovery http://forum.xda-developers.com/showthread.php?t=1213229
Click to expand...
Click to collapse
In my last quote i posted the link of the exact same file. So this didn't work either, same error.. Thanks anyway.
Why don't you try reflashing the recovery via fastboot flasher?It worked for me when I screwed up and flashed the wrong recovery
Sent from my Optimus Me using xda premium
Hmm. Fastboot flasher sounds like your best bet then.
sent from my android powered beast!
try this one
OK，use this one one-click flash recovery5.026 in the attachment. .just download and then decompression to anywhere，connect your phone to computer with ADB driver，and then found runme.bat，and automatic to flash recovery.when finished you can see recovery on your phone like the picture in the attachment.
First, noob here to the HOX and not very bright, technologically speaking, lol.
I'm on ARHD v15.0 and was trying to flash a new kernel (ncx-217) which I repacked with the boot .img of the ARHD rom. I followed ALL of the steps very carefully but when I rebooted I was stuck on the "htc quietly brilliant" screen. So I searched and saw directions to get into fastboot, which I was able to do but, my computer will not recognize my phone now (so I cannot flash something via sdk).
Btw, I do have the CM 10 rom on my sd card to flash in recovery, but no separate boot.img to flash (or any way I know of flashing it from my computer since it's not recognizing my phone in usb fastboot mode).
Thanks in advance
I'm thinking I should just go ahead and flash the CM10 rom I have on my sd card (and hope for the best).
Ugh! My beautiful new (to me) One X...
You're on jb hboot. Jb roms and hboot do not support custom kernels as of now. You'll have to wait till jb kernel source is out and the devs to make one. Reflash ARHD.
Sent from my HTC One X using xda app-developers app
XxVcVxX said:
You're on jb hboot. Jb roms and hboot do not support custom kernels as of now. You'll have to wait till jb kernel source is out and the devs to make one. Reflash ARHD.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I see. But I cannot flash ARHD cause it's not on my phone and I can't get my computer to recognize my phone in fastboot. I do have a copy of CM10 on my sd card. Should I just go ahead and flash that in recovery?
Why don't you just mount USB storage in recovery and copy ARHD over?
tomascus said:
Why don't you just mount USB storage in recovery and copy ARHD over?
Click to expand...
Click to collapse
Can you elaborate? How do I mount USB storage in recovery? Keeping in mind that I cannot get my computer to detect my phone now.
scott62185 said:
Can you elaborate? How do I mount USB storage in recovery? Keeping in mind that I cannot get my computer to detect my phone now.
Click to expand...
Click to collapse
Mounts & storage > mount usb storage =)
Shan89 said:
Mounts & storage > mount usb storage =)
Click to expand...
Click to collapse
Okay, that worked! Nice. So, now I should just transfer ARHD to the sd card and flash that?
Only problem is, I cannot flash the boot.img first because when I go out of mount USB storage (into fastboot) I lose my connection from the phone to the computer...
Nandroid?
If u had a nandroid backup before flashing the kernel.Then restore it.
If not/
Download the latest drives(Htc Sync)
Ur phone will get deteced for sure.
aman360elite said:
If u had a nandroid backup before flashing the kernel.Then restore it.
If not/
Download the latest drives(Htc Sync)
Ur phone will get deteced for sure.
Click to expand...
Click to collapse
Can only find the AT&T drivers and now phone is saying battery level too low to flash! F#ck
Here you can find the drivers, in the first post
http://forum.xda-developers.com/showthread.php?t=1832891
Connect the phone to the wallcharger and go into bootloader and select power down.
Let it charge for a while
And if that doesn't work you can check this thread
http://forum.xda-developers.com/showthread.php?t=1658084
MarcelHofs said:
Here you can find the drivers, in the first post
http://forum.xda-developers.com/showthread.php?t=1832891
Connect the phone to the wallcharger and go into bootloader and select power down.
Let it charge for a while
And if that doesn't work you can check this thread
http://forum.xda-developers.com/showthread.php?t=1658084
Click to expand...
Click to collapse
Should I boot into recovery and charge from there? (that's what it says in the link you listed...)
Yes that is also possible, i assume you are using cwm 5.8.4.0 !
MarcelHofs said:
Yes that is also possible, i assume you are using cwm 5.8.4.0 !
Click to expand...
Click to collapse
yeah
scott62185 said:
yeah
Click to expand...
Click to collapse
Problem solved already ?
MarcelHofs said:
Problem solved already ?
Click to expand...
Click to collapse
No. I was actually able to flash the ARHD rom in recovery but still wouldn't boot (I'm assuming b/c I hadn't flashed the boot .img). I was unable to flash the boot .img due to my computer still not recognizing my phone, despite having installed the drivers. I went to sleep and when I woke up the phone was apparently dead (I think the connection between the adapter and the plug was not good), so I'm charging it again now.
Do you think the lack of the boot .img is the reason it's not working (and not being recognized by my computer)? Any further suggestions? Maybe I'll try and get rid of all the drivers and start over (I d/l'd the drivers several times).
I appreciate your help, man!
Yes i really think that its the reason it doesn't boot !
Install the drivers again after that remove HTC sync but leave the drivers intact its an option in the deinstall menu on the pc.
I'm gonna give a dl link to my fastboot folder . Put the folder on C:\
So it's gonna be C:\fastboot\3 fastboot/adb files.
You probably have this but its easier for me to explain
---------- Post added at 02:05 PM ---------- Previous post was at 02:03 PM ----------
http://db.tt/ldx3qOOU
And if you put the phone in fastboot USB mode within the bootloader menu
And you give this :
Fastboot devices
It should come up with a serial
MarcelHofs said:
Yes i really think that its the reason it doesn't boot !
Install the drivers again after that remove HTC sync but leave the drivers intact its an option in the deinstall menu on the pc.
I'm gonna give a dl link to my fastboot folder . Put the folder on C:\
So it's gonna be C:\fastboot\3 fastboot/adb files.
You probably have this but its easier for me to explain
---------- Post added at 02:05 PM ---------- Previous post was at 02:03 PM ----------
http://db.tt/ldx3qOOU
And if you put the phone in fastboot USB mode within the bootloader menu
And you give this :
Fastboot devices
It should come up with a serial
Click to expand...
Click to collapse
Ok, cool! I will let my phone charge a little while and then I'll try this. Hopefully, you will be around in a few for me to ask you more questions! lol Thank god for you, bro. :good:
I hope so too, depends on how long my son will sleep but I'll be around for sure ! Will check from time to time . No worries , well get it running before the night falls ...... I hope
Hey there guys,
I have rooted my HTC One X a while ago. Used a nice rom and it was all great. But then the HTC Sense 5 and android 4.2.2 update aired, so I wanted to update my phone. I put the new kernel and rom on my phone. Flashed both (something must have gone wrong, because I was in a boot loop). I am able to go to recovery. Somehow I lost all the files on my phone. So there is no rom left. I tried push a new rom on my phone using adb, but it was not successfull because it said: ''no device detected''. So atm I am stuck in recovery, without a rom, the mount usb function on my clockworkmod v5.8.2.7. doesn't work. I do not know if there is a solution. Hope you guys can help me out.
Please! haha!
Freek
Problem is solved. Had to flash a new recovery! Thanks to Mr Hofs and Stefan0vic!
Flash a new recovery, mount the sdcard in there as a usb disk and copy a rom to it.
Flash the boot.img of the rom, make a full wipe and install the rom.zip !
Recovery :
http://db.tt/SPXdFfPw
Mr Hofs said:
Flash a new recovery, mount the sdcard in there as a usb disk and copy a rom to it.
Flash the boot.img of the rom, make a full wipe and install the rom.zip !
Recovery :
http://db.tt/SPXdFfPw
Click to expand...
Click to collapse
Thanks for your responce. There is one problem though, I have absolutely no idea how to put a file on my phone. The mount as usb function doesn't work, I am stuck in recovery.
freekter said:
Thanks for your responce. There is one problem though, I have absolutely no idea how to put a file on my phone. The mount as usb function doesn't work, I am stuck in recovery.
Click to expand...
Click to collapse
Sometimes the mount USB option doens't work for me either.
Do you have all the drivers installed? HTC Sync for instance?
freekter said:
Thanks for your responce. There is one problem though, I have absolutely no idea how to put a file on my phone. The mount as usb function doesn't work, I am stuck in recovery.
Click to expand...
Click to collapse
You don't have to.. you just put your recovery.img to the folder where your adb and fastboot directory is in your computer. Then hold shift+right click, select open a new command window here, then type:
adb reboot-bootloader
fastboot flash recovery yourrecovery.img
Then you have a new recovery.. i hope this helps.
Sent from my HTC One S using XDA Premium 4 mobile app
Stefan0vic said:
Sometimes the mount USB option doens't work for me either.
Do you have all the drivers installed? HTC Sync for instance?
Click to expand...
Click to collapse
yeah, I do have HTC Sync installed. Because it was a while ago I do not completely remember if I still have the other drivers. I guess so though.
gelo01 said:
You don't have to.. you just put your recovery.img to the folder where your adb and fastboot directory is in your computer. Then hold shift+right click, select open a new command window here, then type:
adb reboot-bootloader
fastboot flash recovery yourrecovery.img
Then you have a new recovery.. i hope this helps.
Sent from my HTC One S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey there, I tried this, it didn't work. It just kept saying < waiting for device > in the command window.
So I hope you guys have another solution I'm kind of desperate.
Okay, I retried this. My phone has a new recovery now. The mount usb function still doesn't work on my phone though. My laptop still doesn't recognize my phone...
freekter said:
Hey there, I tried this, it didn't work. It just kept saying < waiting for device > in the command window.
So I hope you guys have another solution I'm kind of desperate.
Click to expand...
Click to collapse
You sure you navigated to fastboot and selected it, and pressed power button?
freekter said:
Hey there, I tried this, it didn't work. It just kept saying < waiting for device > in the command window.
So I hope you guys have another solution I'm kind of desperate.
Okay, I retried this. My phone has a new recovery now. The mount usb function still doesn't work on my phone though. My laptop still doesn't recognize my phone...
Click to expand...
Click to collapse
I know if this would work with anyone else, but sometimes, when my laptop doesn't recognize my phone while on fastboot or recovery, i'll unplug my phone, restart my laptop, reboot my phone to recovery, then most of the time my laptop will then recognize my phone.. i hope this would work for you too. But i really don't know what am i missing here.. but it's not that hard to give it a try.
Sent from my HTC One S using XDA Premium 4 mobile app
Mr Hofs said:
Flash a new recovery, mount the sdcard in there as a usb disk and copy a rom to it.
Flash the boot.img of the rom, make a full wipe and install the rom.zip !
Recovery :
http://db.tt/SPXdFfPw
Click to expand...
Click to collapse
I have to supercid htc one x. Can I update via OTA? (currently not updating)
Then you have s-off too. You should be able to flash the 4.18.401 firmware that upgrades the hboot to 1.72 and then install a sense 5 rom
But sense 5 roms also works on at least hboot 1.36 and higher. Lower then 1.36 dont know....not tested it.
Mr Hofs said:
Then you have s-off too. You should be able to flash the 4.18.401 firmware that upgrades the hboot to 1.72 and then install a sense 5 rom
But sense 5 roms also works on at least hboot 1.36 and higher. Lower then 1.36 dont know....not tested it.
Click to expand...
Click to collapse
4.2.2 RUU is released? I can not find.
Stefan0vic said:
You sure you navigated to fastboot and selected it, and pressed power button?
Click to expand...
Click to collapse
Now it worked. thank you very much man! got my one x running again!
freekter said:
Now it worked. thank you very much man! got my one x running again!
Click to expand...
Click to collapse
Sometimes it's not as hard as it seems
Mr Hofs said:
Flash a new recovery, mount the sdcard in there as a usb disk and copy a rom to it.
Flash the boot.img of the rom, make a full wipe and install the rom.zip !
Recovery :
http://db.tt/SPXdFfPw
Click to expand...
Click to collapse
is it touch recovery?
---------- Post added at 08:35 PM ---------- Previous post was at 08:26 PM ----------
freekter said:
Hey there guys,
I have rooted my HTC One X a while ago. Used a nice rom and it was all great. But then the HTC Sense 5 and android 4.2.2 update aired, so I wanted to update my phone. I put the new kernel and rom on my phone. Flashed both (something must have gone wrong, because I was in a boot loop). I am able to go to recovery. Somehow I lost all the files on my phone. So there is no rom left. I tried push a new rom on my phone using adb, but it was not successfull because it said: ''no device detected''. So atm I am stuck in recovery, without a rom, the mount usb function on my clockworkmod v5.8.2.7. doesn't work. I do not know if there is a solution. Hope you guys can help me out.
Please! haha!
Freek
Click to expand...
Click to collapse
it usually takes a minute or 2 for adb to kick in on the phone after connecting the phone to usb port.
1) check in device manager if your phone is detected Android USB device
2) after connecting your phone PC open command/cmd type adb kill-server
3) wait for about 2 minutes
4) type adb devices if it detects your phone then you can copy the rom zip with adb push xxx.zip /sdcard(ie if you are unable to mount as usb)
Yes it's a fully touch recovery. And the mount usb function is not working in 5.8.2.7 because it's just not supported.
That's why he needs a new one
Hee guys,
Thanks for all the help. My device is running again!
Freek
I cant format,update,or enter revovery mode.Ive tried to turn off the phone and do that power button and volume up.Then i go press recovery,then the phone restarts and go to the same screen.Theres no error thingy showing.
Hi,
Reflash your recovery via fastboot command:
Code:
fastboot flash recovery [color="red"]recovery.img[/color]
Replace recovery.img with your prefered recovery's filename.
Sent from my GT-I9500
krasCGQ said:
Hi,
Reflash your recovery via fastboot command:
Code:
fastboot flash recovery [color="red"]recovery.img[/color]
Replace recovery.img with your prefered recovery's filename.
Sent from my GT-I9500
Click to expand...
Click to collapse
Fastboot undetected
haridzk said:
Fastboot undetected
Click to expand...
Click to collapse
Have you installed the USB driver?
Sent from my GT-I9500
krasCGQ said:
Have you installed the USB driver?
Sent from my GT-I9500
Click to expand...
Click to collapse
You mean using conputer?
New Z00A ZE551ML 3.15 firmware can't upgrade OTA manually
I have the same problem, although it is not likely the drivers.
When attempting to sideload the full firmware image, it errors out after a few seconds, stating that it cannot detect the device. I reboot the phone manually, then reboot bootloader from command prompt. try again and the same thing happens. First, I tried placing the file on an sd card, renaming it to MOFD_SDUPDATE but it failed after 25% and left me with the screen showing the "unplugged" icon. Now I cannot enter recovery at all. Attempted root, tethered, untethered, and no luck with any. I used an app before trying any of this to make sure it was not rooted or unlocked already. I'm running out of ideas. When I get home, I will try flashing just the droidboot.img as suggested in this thread: http://forum.xda-developers.com/zenfone2/help/unlock-bootloader-read-fix-t3138837.
Any other advice would be greatly appreciated. As I said my phone has
VERSION: WW-ASUS_Z00A-2.15.40.13 and failed to manually upgrade to 2.19.40
haridzk said:
You mean using conputer?
Click to expand...
Click to collapse
No, I mean USB Driver, for real. You can't do anything related to debugging without having the related drivers installed.
Sent from my GT-I9500
Quadro1972 said:
I have the same problem, although it is not likely the drivers.
When attempting to sideload the full firmware image, it errors out after a few seconds, stating that it cannot detect the device. I reboot the phone manually, then reboot bootloader from command prompt. try again and the same thing happens. First, I tried placing the file on an sd card, renaming it to MOFD_SDUPDATE but it failed after 25% and left me with the screen showing the "unplugged" icon. Now I cannot enter recovery at all. Attempted root, tethered, untethered, and no luck with any. I used an app before trying any of this to make sure it was not rooted or unlocked already. I'm running out of ideas. When I get home, I will try flashing just the droidboot.img as suggested in this thread: http://forum.xda-developers.com/zenfone2/help/unlock-bootloader-read-fix-t3138837.
Any other advice would be greatly appreciated. As I said my phone has
VERSION: WW-ASUS_Z00A-2.15.40.13 and failed to manually upgrade to 2.19.40
Click to expand...
Click to collapse
If you are getting the USB logo on your screen you're sh!t out of luck as it is a hard brick... You'll need to send back to ASUS to get rom put back on phone...
ultramag69 said:
If you are getting the USB logo on your screen you're sh!t out of luck as it is a hard brick... You'll need to send back to ASUS to get rom put back on phone...
Click to expand...
Click to collapse
I was very fortunate that it would still boot into the bootloader. As a result I was able to fix using these instructions and pre-rooted images, including an Asus recovery image:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
---------- Post added at 04:37 AM ---------- Previous post was at 04:33 AM ----------
Quadro1972 said:
I was very fortunate that it would still boot into the bootloader. As a result I was able to fix using these instructions and pre-rooted images, including an Asus recovery image:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
Click to expand...
Click to collapse
Also, if anyone else attempts this fix, download the images using Google Chrome or it will error out, fail checksum
SOLVED! See my last post on How-To
So, I can't access fastboot. At all. I've tried the following:
Power+Up - Nothing
Boot to fastboot from stock Recovery - Nothing
Boot to fastboot from OS (Advanced power menu) - Nothing
Boot to fastboot from All in One Tool - Nothing
Tried from 3.2.8, and 3.2.7, same result. I have an unlocked bootloader, but that shouldn't matter. And I can't lock it either, since I have no fastboot access.
I can access stock recovery, but have no way to install TWRP.
Please help!
Are u rooted?
Dupleshwar said:
Are u rooted?
Click to expand...
Click to collapse
Was, but with a stock restore I'm fairly sure the root is gone.
deecept said:
Was, but with a stock restore I'm fairly sure the root is gone.
Click to expand...
Click to collapse
You can sideload zips with stock recovery
---------- Post added at 12:44 PM ---------- Previous post was at 12:43 PM ----------
U can try flashing stock again after a backup
Dupleshwar said:
You can sideload zips with stock recovery
U can try flashing stock again after a backup
Click to expand...
Click to collapse
I don't care about data here, so I have tried reflashing stock several times. Both 3.2.7 and 3.2.8, but still refuses to boot into bootloader so I can use fastboot.
Sideload is used to flash stock zip. It still refuses to boot into bootloader mode.
Sorry this as far as I know and can help hope u find a solution soon
Sideload oxygen 3.2.4. The newer ones have updated firmware. once ur in 3.2.4 then try to boot into fastboot.. you should be able to
ihuman007 said:
Sideload oxygen 3.2.4. The newer ones have updated firmware. once ur in 3.2.4 then try to boot into fastboot.. you should be able to
Click to expand...
Click to collapse
Thanks man .. but no go. Still won't boot into fastboot from any of the ways possible.
I'm running out of things to try here! Trying to OTA update from 3.2.4 to 3.2.7 now, see if that helps.
Try adb reboot bootloader?
Sent from my ONEPLUS A3000 using Tapatalk
I did notice something weird. Whenever I'm in stock recovery, and ask to boot to Fastboot, the phone vibrates twice. It seems it's trying to boot into fastboot/bootloader, but fails, and then reboots (second vibration) into the "this phone can't be trusted" image.
Unsure what that means, other than something for sure is corrupt. Any and all help is greatly appreciated!
AFschizoid said:
Try adb reboot bootloader?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Tried, does nothing Same as any other option to boot into bootloader. Thanks tho
Ok turn it off, hold volume up, and plug it in to the computer and tell me if it shows anything in device manager
Sent from my ONEPLUS A3000 using Tapatalk
AFschizoid said:
Try adb reboot bootloader?
Click to expand...
Click to collapse
Second this suggestion.
OP, do you have adb set up? - http://forum.xda-developers.com/showthread.php?t=2588979&page=93
Sent from my OnePlus 3 using XDA Labs
Just saw the post about it vibrating twice. Could be a corrupt fastboot. If you don't want to delete data use method one from this thread. If you don't care use method 2 https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
Sent from my ONEPLUS A3000 using Tapatalk
AFschizoid said:
Ok turn it off, hold volume up, and plug it in to the computer and tell me if it shows anything in device manager
On a Mac, but in System Information QUSB_BULK shows up, with some info indication qualcomm. So at least SOMETHINGS happening here.
Click to expand...
Click to collapse
Ok so it shows qusb bulk but didn't boot bootloader? Give me a min, gotta do some hunting. Or if you get an xp virtual machine set up can use that thread
Sent from my ONEPLUS A3000 using Tapatalk
SOLVED:
I used the MSM Download Tool. I can find the device, and it has FINISHED! It now actually works!
Thanks SO much for suggestions!
Prerequsites:
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
Windows OS
How to:
1. Power off device completely
2. Hold volume up while plugging in, keep holding until Windows; Device manager shows device or Mac: System Information -> USB shows device
3. Install drivers (follow guide in above link)
4. Start MSM Download Tool and press start
5. It should download, and let you know when it's complete. Then reboot into bootloader/Fastboot.
FIXED! Thanks so so much
Good luck
Pretty useless with anything apple as I don't use it lol. Most I've ever done was out a new hard drive and ram in and install snow leopard lol
Sent from my ONEPLUS A3000 using Tapatalk
deecept said:
SOLVED:
I used the MSM Download Tool. I can find the device, and it has FINISHED! It now actually works!
Thanks SO much for suggestions!
Prerequsites:
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
Windows OS
How to:
1. Power off device completely
2. Hold volume up while plugging in, keep holding until Windows; Device manager shows device or Mac: System Information -> USB shows device
3. Install drivers (follow guide in above link)
4. Start MSM Download Tool and press start
5. It should download, and let you know when it's complete. Then reboot into bootloader/Fastboot.
FIXED! Thanks so so much
Click to expand...
Click to collapse
Happy it worked for ya! 😄
Sent from my ONEPLUS A3000 using Tapatalk