Related
What is the best thinnest case for the samsung captivate!
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
I have tried three different cases and found that thr "Body Glove" seems to be the one I end up using the most. It is very thin, tight fitting and feels good while holding the phone. There are really several good choices around. This is of course IMHO.
Sent from my SAMSUNG-SGH-I897 using XDA App
i use the bodyglove case with the diagonal lines on the back. my brother uses the sedio one that snaps in 2 and has the smooth body. the body glove is a little thinner and looks more stylish. both are around 15-20 dollars. i prefer the body glove one because of the back actually, just adds a little touch to an otherwise plain looking phone. both are nice because they dont pick up dust and lint like the cheapo 2 dollar ones. you can tell quality by the seams of the rubber and smell. you get what you pay for. if your phone is worth 400, why spend 2 dollars on a case right?
fastkx450 said:
What is the best thinnest case for the samsung captivate!
Click to expand...
Click to collapse
How much protection are you wanting exactly?
Just picked up the Body Glove yesterday. Really like it, doesn't collect dust and very thin. Good fit also.
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Check these out. They are not as sticky as regular silicone skins and they are fairly thin + cheap.
http://cgi.ebay.com/WHITE-TPU-CASE-...137991?pt=PDA_Accessories&hash=item3cb26715c7
http://cgi.ebay.com/SMOKE-Crystal-S...139274?pt=PDA_Accessories&hash=item5d2d4f700a
http://cgi.ebay.com/BLACK-TPU-SKIN-...791504?pt=PDA_Accessories&hash=item415455ec90
http://cgi.ebay.com/ORANGE-TPU-SKIN...810059?pt=PDA_Accessories&hash=item19c287018b
6 for 11$
http://cgi.ebay.com/6-x-Color-TPU-G...296126?pt=PDA_Accessories&hash=item3f06a32a3e
http://cgi.ebay.com/2x-Tpu-Gel-Case...544565?pt=PDA_Accessories&hash=item5ade97c375
http://cgi.ebay.com/Red-TPU-Crystal...340454?pt=PDA_Accessories&hash=item19c2cc2266
Body Glove is pretty darn thin. I have one but I replaced it with the Otterbox Commuter, just to change things up. Commuter is a bit thicker but I don't mind it at all so I am sticking with it. I do recommend the Body Glove though. Good sleeve.
Plus one for body glove.
Its perfect. Smooth enough that it comes out of pocket easy, but grippy enuff that I can throw it on dashboard without it flying off with the first turn I make.
I also think it looks great, fits perfectly, and I can hold the phone without dropping it-which is the reason I wanted it in the first place
are you looking for a hard case or skin? body glove or a tpu skin is your best bet for the thinnest protection but if you want a hard case then check out Seidio innocase surface
I just got a Xmatrix case (I think its a knock off as its not rubberized anywhere) but the fit is great and gives you a near naked feel. Covers the back and adds a bit to the front edge so the screen does not touch a flat surface if you lay it face down.
MobileNick said:
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
Click to expand...
Click to collapse
I just ordered one of these today, sounds like a good one.
Amzer argyle for $4
Sent from my GT-I9000 using XDA App
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
jgc121 said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
Click to expand...
Click to collapse
Looks just like a TPU case which if you don't mind having a not as fancy case you can get the Amzer one on amazon for $5 shipped and the knockoff ones on ebay for about $3-4 shipped. But the case you linked to is one very nice looking case.
All nice looking cases. I may have to try the TPU out. Looks nice.
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Click to expand...
Click to collapse
+1
That Amzer case does it's job very well. It protects, looks good, thin and is subtle in a good way. The fact that it is now ~$6.00 makes it an absolute steal. I usually don't buy cheap stuff for my phone (or for anything for that matter) but this case performs like a $20 case.
Only issue I have with it is that mine seem to be less snug than it was when I first got it. I only take off my case when I have to do a battery pull so it's a bit surprising that it got loose so easily. I recently bought a Otterbox Commuter to replace this case because I was getting bored with it but I wouldn't say I changed because it was necessary; it was just cause I was bored and I found a good deal for it.
+1 for the xmatrix case. It's a hard case but very slim and is a good fit without any movement or shuffling. Plus, there is a minor lip on the front so you can rest it face down.
It snaps on in the back...just one piece.
Body glove for sure best slim streamline case
Sent from Serendipity 5.3 Captivate via XDA app
Hello all,
As i'm sure some of you have been trying to find a case that fits the 2000mah kit from Samsung and having a lot of trouble? well being a case whore i'm building a collective list of cases which do or do not fit, if you have any info please PM me and i'll add your results to the list, please PM fitting and non fitting cases, but please CTRL+F and search for the case your going to PM me incase it's already on the list. without further ado;
DOES FIT
[CM014056] Case-Mate Tough (However it is very tight, and ideally need the rear rubber being trimmed OR removed back cover)
[CM015699] Case-Mate Safe skin (Fits but has a loose area below camera)
[EF-C1A2B*EC] Samsung Galaxy S2 Flip Cover (Rear side cut out around battery cover, perfect fit)
[EF-CA12P] Samsung Leather Pouch Case (Tight but fits, some screen protectors may dislodge)
[Not Known] Samsung D30 Galaxy S II Leather Slip Case (Tight but fits, some screen protectors may dislodge)
[EF-C1A2LBEC] Samsung Galaxy S II Leather Pouch Case (Fits fine)
[Not Known] SGP Samsung Galaxy S2 Case Neo Hybrid EX (Fits fine)
[Not Known] SGP Linear Series (Fits)
[Not Known] SGP Samsung Galaxy S2 Case Neo Hybrid (Fits but has a loose area below camera)
[Not Known] SGP Neo Ultra capsule (Fits)
[F8M136EBC00] Belkin Samsung Galaxy Swell Grip Graphix (Fits but loose around camera area)
[Not Known] Nillkin TPU (Nearly Perfect)
[SAM4-I9100-20-E4OTR_A] Otterbox Commuter for Galaxy S2 (Fits, slightly loose area above the extended battery cover)
[ICPSAI9100D1D] i Case Pro (Fits)
[Not Known] Aeonaz POLARBEAR (Light modification required)
[Not Known] Zenus Air Jacket
[3BSSGXF41] PDair Leather Case Flip Type
[Not Known] Rearth Ringke Case
[CM014641] Case-Mate Pop Case
DOES NOT FIT
[CM014048] Case-Mate Barely There Case (Will not clip on at all)
[SAMGS2CCBL] Samsung Genuine Mesh Vent Case (Will no clip on at all)
[EEB-U20BBUG] Samsung S2 Power Pack (Cannot align usb connector without damage)
[EF-GS2L] Samsung Moulded Leather Flip Case (clips cannot stretch to phone body due to moulded back)
Some pics would be realy realy nice, so everybody could see how it fits and if they could get used to it.
EDIT: Also you can add the SGP Neo Hybrid and SGP Neo Hybrid EX to the list. First one has a loose are around the camera (as seen in another thread) and the other one fits nicely.
I would put some pictures up but I don't own all of them, and a few I've checked out in Retail stores, however If I buy any that fit, i'll make sure I post up photos of the fit.
Then just put the pictures in you own. Some others who have the extended battery and a case could send you their pictures and you could implement them into your post.
When I get my S2, 2000 mAh battery and decided for a case i will do some pictures for you, too.
PS: You could link every name of the cases to their official pages, too.
Here are some:
SGP Neo Hybrid EX: sgpstore.com/cell-phone/samsung/galaxy-s2/sgp-samsung-galaxy-s2-case-neo-hybrid-ex-series.html
SGP Neo Hybrid: sgpstore.com/cell-phone/samsung/galaxy-s2/sgp-samsung-galaxy-s2-case-neo-hybrid-series.html
Case-Mate Tough: case-mate.com/Samsung-Galaxy-S-II-Cases/Case-Mate-Samsung-Galaxy-S-II-Tough-Cases.asp
Case-Mate Barely There: case-mate.com/Samsung-Galaxy-S-II-Cases/Case-Mate-Samsung-Galaxy-S-II-Barely-There-Cases.asp
Hope I can help improving your thread I think your thread can help very many people.
Would love to know about the Otterbox Commuter compatibility.
anyone tried with casemate pop? might as well getting 2000mah battery rather than getting another spare samsung ori battery if pop case fits well
jytow0716 said:
anyone tried with casemate pop? might as well getting 2000mah battery rather than getting another spare samsung ori battery if pop case fits well
Click to expand...
Click to collapse
I've tried it and sad to say it just wouldn't fit
Add nilkin tpu..almost perfect fit
Sent from my GT-I9100 using xda premium
What about this Case:
- Belkin Grip Graphix Swell Does it fit?
would really like to find out if the pleomax casing able to fit?
zOunda said:
What about this Case:
- Belkin Grip Graphix Swell Does it fit?
Click to expand...
Click to collapse
Hi all!
Yes, as most soft cases the Graphix fits, but you'll see some looseness in the camera section. Also, I did not like the grip of this case at all, it felt slippery imo.
I went for the Neon hybrid instead, very satisfied.
How tight is the fit on the Case Mate Tough case with the 2000mah battery? I like the look of it and just placed an order for it. Is it so tight that there's a risk of damaging the phone?
Zenus Skin Air Jacket
Just got the new battery and put it in my Zenus Skin Air Jacket... dont know what to say... sadly it doesnt fit... but its useable.
The edge of the phone comes out a bit and therefore the access to the volume and powerbutton is limited.
I made some photos but cant post the links due lack of postcount
The Walnutt bumper fits for sure, but hell, it it even fits my Momax 2700mah Expower batts, so that's a moot point.
I am within the M25 and have an otterbox for my S2 if you need to try it then pm me.
what is the sense of using a bumper of a sgp neo hybrid ?
i mean, isnt the purpose of a case to cover the whole phone? both the examples above mentioned appear to just cover the borders of the phone, leaving uncovered the whole back of it.
actually sgp neo hybrid series sounds just like a overpriced bumper.
anyone, can prove the opposite?
actually i am very interested in this because it looks like there is no real hard non/bumper case fitting with the new battery: and the only (crappy) solutions appear to be either bumpers or gum/rubber cases ...
sooby77 said:
How tight is the fit on the Case Mate Tough case with the 2000mah battery? I like the look of it and just placed an order for it. Is it so tight that there's a risk of damaging the phone?
Click to expand...
Click to collapse
IT fits but the rubber part is under a small amount of pressure, pushing the phone out of the hard plastic casing. it is MINIMAL, if your like me and fiddle with your phone all the time, it is just a case of pushing it with the lightest touch back in.
It won't damage the phone unless your trying the impossible (pushing the phone into the bottom cutout.) and pushing so hard you crack the hard plastic shell in otherwords impossible. the ideal would be to cut the rubber out in the shape of the battery lid compartment. on the rubber part, then assembling with the hard casing. so you remove the tension off the added thickness.
if I have a hybrid neo spg .... and put the battery without the back cover ... only with the case spg ... looks good? or can cause problems? (Sorry for my English)
Enviado desde mi GT-I9100 usando Tapatalk
diablous said:
IT fits but the rubber part is under a small amount of pressure, pushing the phone out of the hard plastic casing. it is MINIMAL, if your like me and fiddle with your phone all the time, it is just a case of pushing it with the lightest touch back in.
It won't damage the phone unless your trying the impossible (pushing the phone into the bottom cutout.) and pushing so hard you crack the hard plastic shell in otherwords impossible. the ideal would be to cut the rubber out in the shape of the battery lid compartment. on the rubber part, then assembling with the hard casing. so you remove the tension off the added thickness.
Click to expand...
Click to collapse
Cool. Thanks for the detailed description. I hate to mangle new case, but I may have to do that. Wonder if cutting out the battery compartment rubber part may reduce shock resistance of the case.
Can anyone tell me if it will fit in the Samsung Leather Pouch?
If not are there any other 'pouch' style cases that will?
thanks
First of all, i would like to thank the people over at Trident (www.tridentcase.com) for sending this case out to me.
Packaging - The box is pretty simple. Shows the product and the different colors it comes in. Black, Red, Pink, Green, and Blue. i will be showing off the black model. Inside the box comes a screen protector kit, which includes the screen protector, microfiber cloth and a applicator/squeegee card. The case retails for $49.95.
Case - The Kraken AMS case is a heady duty 3-Layer case which features a shock absorbing silicone, a polycarbonate plastic shell, rubber dust covers over the microphone and speaker, rubber covers over ports (charger and headset), and holster. The silicone part, or Perseus can be used as a stand alone case on days that you don’t need maximum protection, but will still give u good drop and scratch protection. The two polycarbonate shells cover the silicone to make the case durable. The case has a nice lip around the screen for a lay on table design. One accessory that the case comes with is a really durable metal kickstand. They also have other Kraken accessories which make the case more usable in everyday life. such as an AMS Bike Clip, AMS Tripod Mount, AMS Headphone Organizer, AMS Seatbelt Clip, and AMS Windshield Mount.
Thoughts - My thought on the case are it is made of very high grade materials. everything fits. cutouts are precise. I’ve only had the case for a few hours and i love it. the silicone is way much better than the otterbox defender. it feels of quality and doesn't attract lint. the volume and power buttons feel better than the naked buttons to me. the kickstand is SOLID and does its job great. the holster is just as heavy duty as the case and rotates so you can wear it comfortably. i will update the in a few days to give more opinions...
Pics - I will have pics of the phone with the case tomorrow, as my nexus is my only camera at the moment.
http://imm.io/iJnX
http://imm.io/iJoQ
http://imm.io/iJpn
http://imm.io/iJpw
http://imm.io/iJpJ
http://imm.io/iJpR
http://imm.io/iJqe
http://imm.io/iJqn
Conclusion - I think the case is well worth the $50 you are paying. you are getting a heavy duty case that can be used as a lightweight case also that provides an ample amount of protection. I would definitely recommend this case to anyone who is looking for an overall great case that will add bulk to your device.
if u feel i left something out or want to ask a question. go ahead. thanks.
But will it blend? http://www.youtube.com/watch?v=lAl28d6tbko&feature=youtube_gdata_player
Seriosly though, If this fit a mugen 4000 battery id buy it. But so many premium cases none of them expandable
Sent from my Galaxy Nexus using Tapatalk
what do u mean by blend.?
rlamontjr said:
what do u mean by blend.?
Click to expand...
Click to collapse
Never seen the "Will It Blend?" videos?
http://www.youtube.com/user/Blendtec?feature=watch
Can't wait to see some pictures of the phone inside the case.
Some questions...
First, how do the two plastic pieces (the front and back) fit together?
On my otterbox defender, they just snap together with some tiny little clips and after about two drops 3 out of 4 clips are already broken so the only thing holding them together is the silicone cover that goes on the outside. I'm hoping the kraken is a lot more rugged in that aspect... The otterbox is great at protecting the phone but the case itself is already trashed after a few drops which isn't cool.
Second, how bulky is the kraken? It looks bulkier than the otterbox defender, especially on the sides since it looks like it has a ridge sticking out from either side of the screen. Does it feel good in the hand? My defender definitely makes the phone about 30% thicker which makes it less comfortable to hold but I've gotten used to it. Don't know how I'd feel about the ridges on the Kraken however.
Anyway thanks for the review.
Sent from my Galaxy Nexus using xda premium
hmmmm. might just scratch, but not blend.
the two plastic pieces fit together nice and tight. the top and bottom are snap together. but the sides are actually placed in slots, it can be slight difficult to remove if u don't have nails. but i see that as a good thing. the Kraken would take some time to show wear and tear.
it may b just a tad bit bulkier, but the grip is a for sure thing. the poly carbonate is not glossy but isn't matte. it's sort of in between but doesn't show finger prints. the sides have ridges for better grip as well. i actually thought the defender felt great in hand, maybe because i have small hands tho.
few more pics.
http://imm.io/iLsD
http://imm.io/iLsR
http://imm.io/iLsX
Has anyone tried one of these with the extended battery? Looking forward to pics of the phone in the case.
More Pics...
http://imm.io/iWzQ
http://imm.io/iWzZ
http://imm.io/iWAd
http://imm.io/iWAn
http://imm.io/iWAz
http://imm.io/iWAI
http://imm.io/iWAR
http://imm.io/iWAY
http://imm.io/iWBl
http://imm.io/iWBF
the case fits the GSM extended battery with no problems at all.
Does this case make it hard to press the volume and power buttons? And it seems to cover up the notification light at the bottom doesn't it?
the buttons are the best thing on the case IMO. and the notification light isnt covered.
rlamontjr said:
the buttons are the best thing on the case IMO. and the notification light isnt covered.
Click to expand...
Click to collapse
Thank you! I will probably be ordering the phone, this case and the 2000 mAh battery all today then
Ngo93 said:
Thank you! I will probably be ordering the phone, this case and the 2000 mAh battery all today then
Click to expand...
Click to collapse
HI, just wondering if you wound up getting the 2000mah battery afterall and if so, how well it fits.
if it fits 100 percent with extended battery im a get one to
i recently bought one it appears the notification light is 40% block.. i'm using the standard battery gsm version could that be the reason i wonder
I have the same case with the extended battery (Sprint) and everything fits perfectly. The notification light is about 50% blocked but I dont use it anyways so it did not bother me much. The notification bar is easy to pull down with no interference with the top of the case like with the otterbox. The case can take a beating I have drop tested survived a 12ft drop. Even though it adds bulk because it is hard polycarbonate on the outside it makes it really easy to get in and out of pockets even with tighter fitting jeans.
Also if you have a Costco or Sams Club near by you can pick up the case for $30 instead of $50.
Seidio convert is better.. options for all gnex models and batteries
Sent from my Full AOSP on Toro-VZW using xda app-developers app
After a couple of months, do you guys still recommend the Kraken?
saintpanache
saintpanache said:
After a couple of months, do you guys still recommend the Kraken?
saintpanache
Click to expand...
Click to collapse
I would recommend it if you are looking for a case that offers similar or even more protection than the Otterbox Defender. The case adds quite a bit of bulk to your phone though so that may turn off some people.
Throughout the work week, usually switch between the Kraken, Otterbox Commuter, and the SGP leather pouch. The Kraken will be used only if I have to go out to do field work.
The Commuter is only used if I feel like I don't want to use the SGP pouch. Otherwise I end up using the SGP pouch most of the time on the slower days of work where I'm just stuck in the office.
I'm leaning toward the Kraken because I've read a couple of story about how the Otterbox defender was scratching phones.
I have a commuter right now but I need something more rugged for work and also to protect my GNex from my crazy kids
saintpanache
If that's the case, the Kraken would be a good purchase for you. My Kraken case has held up well when I drop my phone when I'm out doing field work. Very durable and well worth it!
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Personally I like the Leather style flip cases, The one that doubles up as a wallet.
http://www.ebay.co.uk/itm/BLACK-WAL..._MobilePhonesCasesPouches&hash=item3374db7913
I would never pay more than £10 (delivered) for a case.
in terms of slimness i've basically narrowed it down to two giants.
1. sgp ultra thin
2. casemate barely there.
not sure which ones better but from what i can tell they're pretty much the same, both at a hefty 25 bucks.
anyways, i'm in the same boat as you. XD
not sure which case to get.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the rearth and it is very slim, the only down side it is a beeeoootch to take off (i have a dock/charger for the phone) and if you take it on and off a lot it cracks and the part closet to the usb port cover, nothing earth shattering it actually makes it much easier to take the case off - that and the sgp ultra clear and it is almost like having nothing on the phone at all.
I have used diztronic cases for the last year (for my SII and now my N7000). They are very similar to the boxweave case you posted.
http://www.amazon.com/Diztronic-Fle...0386413&sr=8-3&keywords=diztronic+galaxy+note
As you know TPU protects like a silicon case but doesn't stick in your pocket or collect lint and dust due to it not being "sticky" feeling. I recently sold my SII for over $300 after 8 months of daily use because my SII was in perfect condition as a result of being in a diztronic tpu case. No, I never dropped the phone on cement or anything but I dropped my SII on the carpet from 5+ feet and the phone was unchanged when I picked it up. Didn't pop out of case or battery, etc. Because the tpu cases have a 1/8 or so "lip" on the front they also allow the phone to be placed face down on flat surfaces. IMHO and experience, a good tpu case is all you need to fully protect your phone unless you work in construction or somehow expect to drop it on cement.
So, my vote goes to the boxweave or diztronic cases. BTW I got 2 diztronics for $14 from amazon, the black matte and smoke matte. Great deal!
^I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
Anyway, Thanks for the input so far guys, keep it coming.
bumper TPU from Amazon
I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
first post here,
I have one of these.
search amazon for bumper cases.
I'm not allowed to post urls.
I like it, I have it on right now. What I have is different from what's
in the pictures. No cutouts for the buttons and the other cutouts are not
as big. The covers of the buttons are pretty sensitive, unlike the covers
for the Boxwave type which I got from Hongkong for 2 bucks.
Check amazon out, they have a lot of cases.
I also have the elago Breathe case, I love them I have two.
I ended up taking my chances on this. I guess it's going to be as close as I get. Thanks everyone, I'll let you know how it is when I get it.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the 3 of them
Go for the Rearth Ringke Slim , is THE BEST OF ALL !!!
Hi all, I'm in a similar dilemma.
I've got a choice between these two:
https://www.gearzap.com/media/catalog/product/3/4/34484-2.jpg
and
http://www.ebay.co.uk/itm/HYBRID-SI...lePhonesCasesPouches&var=&hash=item416682f7b6
I know I should pick the Zenus, but would the inside bit that holds my phone scratch the outer bezel? And since the hybrid one has a silicon case THEN a hard outer shell I figured it would be good too. Any ideas?
Thanks!
I use a an SGP Ultra thin. Comfortable case. Considering the size of the phone the case is great. Merges with the Phone. +1 anytime.
I ordered this one http://www.ebay.co.uk/itm/160732471512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. It has a stand that works in both axis.
good
Nice
Particularly one that can fit the OEM extended battery (which, speaking of, where's the best/cheapest place to get it)?
I'm used to just going for Otterbox, but the one for the Nexus looks ugly and like a complete lint/dirt magnet (the notification light cut-out part particularly). I already have a thin/light case on the way, which I got before I realized how small my hands are and how cautious I am about not dropping to phone due to a lack of grip when using one-handed - and it's already dropped once and left a tiny scratch on the back...and I've never dropped my phone before getting a Nexus.
So...recommendations? I read about Ballistic and Aegis cases a bit but aren't familiar with them at all. Seidio cases look nice, but no idea what kind of protection they offer. Anything with a plain black base is preferable, color accents would be nice (including pink if it's not too gaudy) - anything with a light base (white especially) is out.
I think the Trident Kraken is the most protective case out there. It's not very grippy b/c of the plastic being on the outside though. And it has a kickstand
Ngo93 said:
I think the Trident Kraken is the most protective case out there. It's not very grippy b/c of the plastic being on the outside though. And it has a kickstand
Click to expand...
Click to collapse
It looks grippy and rubbery from pictures, it's just a hard/smooth plastic on the outside? It looks nice otherwise, thanks. And is the kickstand plastic or metal?
I bought an Otterbox Defender series for Galaxy Nexus. It is fitting both the standard and the stock extended battery. It is the only case that has a tough protective material for the display also. Of course, it is stealing a little of the clarity, but it is a fair trade for the toughness that is providing.
ro_explorer said:
I bought an Otterbox Defender series for Galaxy Nexus. It is fitting both the standard and the stock extended battery. It is the only case that has a tough protective material for the display also. Of course, it is stealing a little of the clarity, but it is a fair trade for the toughness that is providing.
Click to expand...
Click to collapse
How's the material on the back? I had two Otterbox Commuter cases and found the back to be way too slippery/smooth (it was fine since the phones were small enough to grip easily). And is it possible to remove the screen protector? I already have a good matte screen protector on.
At the moment I'm kinda leaning toward the Trident Kraken for basically being a two-part case and being kinda nice-looking too.
The material on the back is a VERY grippy silicone. No plastic on the outside.
It is possible to remove the screen protector (I've seen other people doing it) but why in the world would you like to do it?
I bough the case to take the phone out on my mountain biking rides where I really need a tough screen protector not for the scratches but for the rocks .
I also have a XO screen protector on the display, for regular use.
I'm not using the tough case daily .. it is transforming the phone in the life signs detector used by the Earth crew in Stargate Atlantins
---------- Post added at 09:30 PM ---------- Previous post was at 09:26 PM ----------
I just recompiled what you wrote ... the otterbox IS two part case .. a polycarbonate case (which has the screen protector) which is fitting in a silicone enclosure ... and you also get a polycarbonate holster for the whole assembly
Try out the Seidio Convert case. I use it while at work and it is a pretty nice case!
http://www.seidioonline.com/samsung-galaxy-nexus-convert-case-holster-black-p/bd4-hkr4ssgnl.htm
Sent from my Galaxy Nexus using xda app-developers app
I've got the Ballistic. Seriously, it's awesome. I don't fear dropping it and it gives much more protection than the commuter. Says it was designed for the non gsm version, but my gsm with stock battery work perfect, so I guess with the extended it will also work. Very good grip on the back, seriously with the shell and silicon I don'T even think about the grip I sometimes just want to drop it lol. Corners = win.
Also, It looks manly. Fits in pocket, corners sometimes make it harder to pull out/in if you're sitting.
I would try the Seidio convert only if I decide to buy the extended. Looks beastly.
http://www.youtube.com/watch?v=UE_Z31IIByw
I don't care for the screen protector built-in the Defender since I already have a matte screen protector that diminishes the screen quality (and having a clear/glossy protector on top of it would also defeat the purpose of the anti-glare and silky feeling of the matte protector), and while I'm sold in the protection, I'm not sold on the looks of the front (the area around the LED is a bit much if you ask me, and seems like it'd make it difficult to see the LED at certain angles).
The belt clip/holster on any case (Defender included) are useless to me, but a kickstand (that doesn't require a belt clip) is very nice...and as a result I'm kinda stuck between the Seidio Active with kickstand (for price) and Trident Kraken (for looks and being two-part; being able to get different-colored bases for cheap is a huge plus).
Any other suggestions with kickstands would be nice, and I do appreciate the other input/suggestions; while I'm certainly not against multiple cases, I only have money for one and want it to last at least a month.
And yeah, "manly" looks aren't exactly a pro for me =P
I bought the Defender in pink so could use the extended battery, and I wanted something rugged. My husband got the Trident Kraken. His looks nicer but he complains that it is too slippery. Not sure if there is a perfect case out there
magus57 said:
Particularly one that can fit the OEM extended battery (which, speaking of, where's the best/cheapest place to get it)?
Click to expand...
Click to collapse
Got mine from a Korean seller on eBay (think it was shim shop or similar - had good seller ratings). Took a while to arrive but its the real deal.
SGS Hybrid and Zenus cases are fine with the bigger battery, but not very heavy duty.
Trident kraken is by far the most protective and will fit both stock and extended battery. It's not as grippy as the defender but it's by far better quality and the kickstand can be taken out and other accessories like gps mount, bike mount, desk mount, and tripod can be used with the case
I said screw buying a case for my nexus, when I can buy a complete rear housing and battery door for $20 on eBay. When the housing gets scuffed up replace it.