Uhm.... I went to change my CPU governor today because I was noticing severe lag; it's stuck on interactiveX
I'm running MikG 3.xx, System tuner, rom toolbox, and a theme. When I try and change it in Tuner, it instantly reverts back to InteractiveX. When I do it in Toolbox, I can change it but it does not reflect in Tuner. I have uninstalled both, rebooted, wiped cache and dalvik, and reinstalled.... same issue.
Any fix?
This should be posted in q&a, not in dev section. Having said that I'd reflash the kernel then try again
Naturesretard said:
Uhm.... I went to change my CPU governor today because I was noticing severe lag; it's stuck on interactiveX
I'm running MikG 3.xx, System tuner, rom toolbox, and a theme. When I try and change it in Tuner, it instantly reverts back to InteractiveX. When I do it in Toolbox, I can change it but it does not reflect in Tuner. I have uninstalled both, rebooted, wiped cache and dalvik, and reinstalled.... same issue.
Any fix?
Click to expand...
Click to collapse
Like fitz said, wrong thread.
However, are you checking the "Apply on Boot" button. Or whatever it says
I would also try re-flashing - and re-downloading - the kernel you are using.
Thread moved to Q&A....
Sorry guys was unaware I posted in Dev. I have not tried reflashing, but I got antutu cpu app and it confirms that I change it and it sticks in there, but still reflects InteractiveX in Tuner. Will try reflashing.... Should I clear D-cache and cache?
Related
Hi, everyone; adding to the flood of questions...
I've been having some issues after a reboot lately:
- a couple of my apps will disappear. Namely Line Runner and the Merriam Webster Dictionary. I did some searching on this earlier and people who have had similar problems said it was due to the apps being installed on SD. I moved them to the phone, which seemed to solve the problem, but:
- rebooting also seems to make me lose my latest Google Search and Maps updates. The market will prompt me to update these. These apps are already on the phone, so no clue how to fix that one. But the most annoying thing is:
- after reboot, several of my game apps will force close when I try to open them. It seems like it's the more processor-intense ones: Pew Pew, Osmos, Anomaly, World of Goo. I thought maybe it was because of the undervolting/underclocking settings I have (from GideonX), but the apps work fine (running quite smoothly) after I install them, as long as I don't reboot. As soon as I reboot, if I try to open them again I get FC. If I uninstall then reinstall, they run fine again.
Any ideas? I'm running Juggernaut 4.1 with faux's 009u kernel and, as I said above, Gideon's script. I tried one reboot back to faux's stock clock/voltage settings, but I still got FCs on the apps. Granted, I didn't try it again or give it time to settle in or anything.
Any thoughts, folks? Thanks!
fix permissions? fresh wipe and install? clear cache? fiddle around
Ah, forgot to mention. Tried all of the above (fix permissions, clear cache, reflashed ROM, even recovered to my pre-custom ROM backup and reflashed from there).
I did some more testing on this, and I think I've narrowed down the problem. I flashed back to stock voltage/clock settings under faux's kernel, then reinstalled one of the apps I had issues with (Osmos). Upon reboot it still ran okay. So it seems I won't get force closes after reboot IF the app was installed under stock settings.
Does anyone know why undervolting and/or underclocking would cause apps to force close only after reboot?
EDIT:
Well, never mind. I did some more testing, and what I thought worked last time didn't work again. Must have just gotten lucky that time. Sigh.
Try wiping your phone with darksides super wipe and clean flash a rom. Check the md5 sums to make sure youre not installing a bad download
Sent from my SGH-T989 using Tapatalk
Oh, wow, didn't even know about the existence of that tool. Will definitely give that a try when I have some free time this weekend. Hopefully I can report back with positive news.
Thanks!
Don't want to count my chickens, but using super wipe seems to have done the trick so far! Using super wipe before flashing Jugg 5.0 seems to have gotten rid of my problem of FC apps.
Thanks again!
I want to revert setting made with setcpu on my htc desire. But i uninstalled app several times, even change rom, but frequencies are not default. I`m using RunnymedeROM. Is it possible that this ROM automaticaly comes with kernel that overclock CPU?
My question is: What do i have to do to revert CPU settings to default? If i have to do it manualy, what are min/max freq and governor by default?
Thanks in advance.
Yes there are times roms comes in with overclocked settings.
Default settings as far as I am aware are as follows:
Governor: Ondemand
Max Freq: 998MHz
Min Freq: 245MHz
I tried everything. Reinstalled several times, uninstalled too. Clear data but everythime my settings get back to 1113Mhz, and thats not default freq for htc desire. Is there some universal method to get back defult settings for htc desire?
Does reflashing or installing new ROM revert settings? Or maybe hard reset?
vnugo said:
I tried everything. Reinstalled several times, uninstalled too. Clear data but everythime my settings get back to 1113Mhz, and thats not default freq for htc desire. Is there some universal method to get back defult settings for htc desire?
Does reflashing or installing new ROM revert settings? Or maybe hard reset?
Click to expand...
Click to collapse
Check if it is default frequency range for that rom.
Sent from my HTC Desire using Tapatalk 2
Im not certain but some roms have Daemon Controller app to set frequencies. And most roms I flashed with that app installed are usually overclocked. You may wanna check if your rom has it.
via xda app
stankyou said:
Im not certain but some roms have Daemon Controller app to set frequencies. And most roms I flashed with that app installed are usually overclocked. You may wanna check if your rom has it.
via xda app
Click to expand...
Click to collapse
Yeah runnymede aio has daemon controller app and is set to 998mhz like u said and if u install setcpu in overides daemon so if u have the daemon controller app just change it to what u want and press apply then reboot and check to make sure the changes r the same.
(uninstall setcpu first)
Sent from my HTC Desire
Hi there guys,
I had an issue last night which seems to have "corrupted" data on my phone. I'll try to explain. I am running AOKP milestone 5 with Franco's 512GPU #191 and I was on the Play Store updating some apps. I remember that it was something like 10 apps being updated (I recall seeing Youtube, Google+, Maps, Instagram and Chrome in the list to update). While the apps were updating I went to the Franco Kernel updater app and changed the Power Mode to one of my customs, that is max CPU 15xx MHz, min CPU 12xx MHz, governor Performance. Went back to the Play Store to check how the updates were going and then the screen went black and the phone started to reboot. After that, it took more than the usual time to boot and when it finally did, I had everything "messed up". I had a dialog asking me what launcher I want to use, I choose Nova and all the widgets can't be loaded, followed with lots of Force Closes. Almost every app I try to enter leads to a force close, and I have noticed that when, for instance, I open Toshl or other apps in which I had info, before it force closes it behaves like it was the first time I open the app (asking for the login info, etc).
I tried going to recovery to clear Dalvik cache and cache partition, tried to Fix permissions, without any luck. Is there anything I should try to do before wiping everything? I have some app's data that I didn't want to lose... I could try to get some logs if someone leads me on how to do that.
I really don't think that this is directly related to Franco's kernel or AOKP, but would sure appreciate some help/guidance!
Thanks!
Also I have just tried to dirty flash AOKP M5 and gapps again (wiping cache partition and dalvik cache) without any luck... Anyone has other ideas I should try before performing a full wipe? I am leaving the full wipe to my last resource.
Thanks
Try running using fix permissions from your recovery, it sounds like they may have gotten messed up
Should I reflash ROM and gapps after fixing permissions in the recovery? Or just fix the permissions and reboot?
Thanks!
Also, how long should it take to run the Fix permissions? My recovery is showing me "Fixing permissions..." for almost 10 minutes. Is this expected?
Thanks!
EDIT - It seems like I had the same problem reported here: http://www.drewgreen.net/wordpress/tag/galaxy-nexus/
I followed the steps and am now waiting for the fix permissions to finish. Will let you know if it helped!
EDIT 2 - Although I don't think it is perfect (I'm still getting FC's on Swiftkey, for instance), it has recovered almost everything! Now it's maybe a good time to make some backups and do a clean install!
Thanks!!
Currently Im on ViperX 4.0.0 ROM and AlexV kernel 2.1. I tried to change my scheduler and governor from the default settings to Sio and Smartmax but after a reboot everything returns back to default settings. I went on to search for a permanent way to keep the settings that I want and downloaded Trickster Mod. I tried to change the settings in Trickster Mod and reboot my phone. It still revert back to default settings. Is there any way to keep my settings permanent?
On a side note, anyone uses the same ROM and kernel as me? Does certain shortcuts go missing on your screen? Somehow it happened for me.
have you tried enabling 'set on boot' in trickster mod? please say you have...
ronaldtzh said:
Currently Im on ViperX 4.0.0 ROM and AlexV kernel 2.1. I tried to change my scheduler and governor from the default settings to Sio and Smartmax but after a reboot everything returns back to default settings. I went on to search for a permanent way to keep the settings that I want and downloaded Trickster Mod. I tried to change the settings in Trickster Mod and reboot my phone. It still revert back to default settings. Is there any way to keep my settings permanent?
On a side note, anyone uses the same ROM and kernel as me? Does certain shortcuts go missing on your screen? Somehow it happened for me.
Click to expand...
Click to collapse
take a look here http://forum.xda-developers.com/showthread.php?t=2226360&page=202
Hi guys, recently ive been playing about with roms and i decided to use the aurora play rom for a bit. I had lupusv12 kernel installed at this time with profiles installed. I flashed lupusv12.5 over v12 since they had the same partitions. I also installed auroraplay rom, it came built in with no frills cpu which i didnt like. The reason for that was because it kept inter-fearing with my profiles from setcpu (not letting em work). So i decided to use a file explorer and delete the no frills cpu app built into the rom. After that set cpu's profiles still were not working. So i changed back to stock, still with the lupusv12.5 kernel, and now the profiles (eg opening gta vice city OC to 1.6ghz) still wernt working, and when i went back to setcpu it would take a while to load then crash then i would have to reopen it again for it to work. Profiles still not working, what in the world is going on? The overclocks like moving the slider to 1.6ghz still overclocks but the profiles wont do it, Its annoying to have to keep opening setcpu then open the game, then close the game then open set cpu to return to normal, really annoying, can anyone help?
SetCPU issue.
Mushtaqs said:
Hi guys, recently ive been playing about with roms and i decided to use the aurora play rom for a bit. I had lupusv12 kernel installed at this time with profiles installed. I flashed lupusv12.5 over v12 since they had the same partitions. I also installed auroraplay rom, it came built in with no frills cpu which i didnt like. The reason for that was because it kept inter-fearing with my profiles from setcpu (not letting em work). So i decided to use a file explorer and delete the no frills cpu app built into the rom. After that set cpu's profiles still were not working. So i changed back to stock, still with the lupusv12.5 kernel, and now the profiles (eg opening gta vice city OC to 1.6ghz) still wernt working, and when i went back to setcpu it would take a while to load then crash then i would have to reopen it again for it to work. Profiles still not working, what in the world is going on? The overclocks like moving the slider to 1.6ghz still overclocks but the profiles wont do it, Its annoying to have to keep opening setcpu then open the game, then close the game then open set cpu to return to normal, really annoying, can anyone help?
Click to expand...
Click to collapse
Have you already tried uninstalling the nofrills CPU app?
Deleting it on the system/app folder may affect some code that is causing an issue on your Setcpu app.
Removing the app on the root folder might not be enough to remove all the code link on the rom.
I suggest using titanium backup or any app that can uninstall a system app.
bLoodYHandZ04 said:
Have you already tried uninstalling the nofrills CPU app?
Deleting it on the system/app folder may affect some code that is causing an issue on your Setcpu app.
Removing the app on the root folder might not be enough to remove all the code link on the rom.
I suggest using titanium backup or any app that can uninstall a system app.
Click to expand...
Click to collapse
i should have said somthing sooner but i already fixed the problem, and i tried uninstalling it, and it failed, so thats why i deleted it. I fixed my issue by erasing the system/data then reflashing the stock rom and everything worked again, cheers for trying to help though. :good:
Mushtaqs said:
i should have said somthing sooner but i already fixed the problem, and i tried uninstalling it, and it failed, so thats why i deleted it. I fixed my issue by erasing the system/data then reflashing the stock rom and everything worked again, cheers for trying to help though. :good:
Click to expand...
Click to collapse
what version of setcpu are you using? because i heard issues with versions above ver 3.0.9 are having issues with profiles
xdarkmario said:
what version of setcpu are you using? because i heard issues with versions above ver 3.0.9 are having issues with profiles
Click to expand...
Click to collapse
im using the latest version 3.1.2 , somthing like that i know its higher than 3.0.9
xdarkmario said:
what version of setcpu are you using? because i heard issues with versions above ver 3.0.9 are having issues with profiles
Click to expand...
Click to collapse
im using the latest version 3.1.2 , somthing like that i know its higher than 3.0.9