I've got a problem where none of my ringtones work. When I get a incoming call, I see a little status icon that seems to indicate no sound, then I get a small beep followed by the answer the call screen.
I do get notifications for SMS messages so I'm unclear as to whether or not this is the standard notification bug or something different. Additionally, the problem continues after a reboot.
Silent mode is off, the phone is set to ring and vibrate (neither happen), and I have a standard ring tone (I've tried almost all of them).
My modem is FD19 and I'm using Calkulin's E4GT 2 v1.4 rom. I've had ringtones on this rom with different modems - but every time something would happen and it would stop working?
Interesting... if I reboot and bluetooth is off (not sure bluetooth is related), the first call will ring. The second won't. I didn't do anthing but answer the phone then hangup my receiver and wait for the phone to return to the home screen on its own.
This acts like the notification bug but with somewhat slightly different behaviors and fixes.
I am now on FD24 modem - so much for the notification bug fixe!
Related
My phone wont ring though, BIZARRE, this is not to do with the rom though as i think it was happening with schaps, really really strange.
Any ideas, I just get a phone icon where the signal strength bar is showing handset. No callerid flashing up, not even an option to accept the incoming call. I go to phone options and test the ring tone and it plays just fine.
maybe i should reflash the radio, on 1.50 at the mo which i recently flashed to downgrade from 1.51, any ideas?
maybe i miss something totally obvious.
bumppppp? anyone?
same happening to mine on ultra ultra lite re-furbished
i had to flash another rom, then it worked. when i flashed back to same rom it didnt work again. the problem started after i added some cabs and did my regular tweaks. even with the fresh install of the same rom after flashing another rom it still didnt work.. i even changed radios
i'm on ultra lite, and it seems nice. So you saying i should flash another rom then come back to ultra lite?
Ok,
I just reflashed schaps, then flashed ultra lite.
I STILL have this wierd problem, what's going on?
Is my fone knackered? Not much good if it don't ring!
the rom has been discontinued and he is fixing it
known bug.....wait until new relase
shame it's a nice ROM, nice un' quick. fixed yet ?
same here..
I noticed that no sound was coming out of the phone when i did a soft reset and the Schap's Rom boot up with the animation + sound didnt sound. Also my speaker phone does not work. Basically and audible sound does not work!!!! i tried flashing it with dutty's rom, still same problem.. any ideas?
Hope this helps in resolving this issue!
Hi. I've run into this issue myself too. Here's my environment:
Cooked ROM via Pandora's Kitchen 7.1 with 3.61 OS
Using Dutty's Touch Dialer (2G) option in BuildOS
Everything was fine with the ringer for a whole week. I then decided to be a bit adventurous and went to look for a 3g dialer because the Touch one is only 2G. I then settled for Schen's 3G dialer 2.0 and followed his instructions in installing it (install OEMSign2007cert.cab first, then the dialer, which was the one with the dialer directory option). I didn't install any colored background cabs as provided by his package.
When I tested the dialer (outgoing portion), it seemed fine. I couldn't test the 3G option because we don't have 3G here yet. The problem began when I received my first call.
I was able to hear the incoming call beep through my BT headset, but that was the only indicator of an incoming call, in addition to the phone icon above the signal meter in the top bar signifying an incoming phone call. Besides that, there were no other indicator such as a pop-up window showing incoming caller's info, phone ringing, or even the vibrate function. I have my phone set to vibrate and ring with the Ringer-Vision.wma as the default ring tone.
I tested the vibrate and ring setting in the phone configuration panel and both the vibration function and ring tone worked. I tried several configurations such as vibrate only, ring only, etc, in addition to other various ring tones of different format (wma, mid, wav). All resulted in success in the phone configuration panel, but in failure when an incoming call came in.
To test the phone function, I used a land line, a cellular line, and SkypeOut. All three resulted in the same failure observed above.
Given that the only thing changed after that week was the 3G dialer, I proceeded to remove it and reboot. It reverted back to the Touch 2G dialer. When the phone rebooted, I retried the above tests and all resulted in the pop-up dialog with incoming caller information (plus the two softkey functions), vibration function, and the proper ringtone.
With the above results, would it help you guys in further diagnosing and fixing this problem? We are slated to have 3G within the next few months and I would like to be able to use this function.
Thanks!
Edit update: One other thing is that I tested the above both with and without my BT headset on.
Quakie
I do understand what you are talking about how you tested out the ringers in the phone options menu.. but for me any type of sound does not work, i ran tests there no sound, speaker phone does not work, MP3 do not sound. The sound only works through a head set. And when im on a call i could hear the other person and vise versa. So the problem is the speaker just went out after a couple of days of having Schap's rom. I tired flashing another rom a couple of days after. No luck. Any ideas?
-thanks
So I had a TP2 (from Telus) for approximately 2 months with the stock ROM. I put some custom ringtones on it, and set it up to play a sound and vibrate on incoming calls, incoming SMS, incoming e-mail.
When I first start the device, everything works fine for a while, however, after some period of time (varies) the audible alerts for SMS and e-mail stop working...still works for incoming calls (so it's not muted or anything).
Randomly, the vibrate feature will stop "working" as well, it won't completely stop working, but instead of a long vibrate, I get ONE vibrate (like you get when you push a key on the soft keyboard).
I upgraded to an EnergyROM WinMo6.5 ROM last night, and this afternoon this problem surfaced AGAIN.
Any solutions / thoughts?
Thanks
convert your sounds into another format.
faria said:
convert your sounds into another format.
Click to expand...
Click to collapse
What format?
All three (including the phone ringer, which always works) of the sounds-in-question are MP3s.
Try using WMA
though I must say my TP2 works fine with MP3 media as well.
same thing happens mine too. mostly ok but sometimes no sound from my tp2 or different ring tones. I have original rom
Nope. This is most likely a hardware issue, unless you are running a non-ATT device. The format has nothing to do with it; the device can actually play movie files (audio portion) without a single problem, even when on the storage card. It sounds like a hardware problem about the vibrate thing. But, that notification thing sounds pretty much software. Try with the stock sounds and see if it makes a difference then put the custom ones on main memory and try again.
So kind of a weird issue that I've never experienced even on custom Roms. My phones ringtone has stopped working. It will vibrate and always receives calls, I have notification sounds and alarms work just fine but the phone never actually rings it only vibrates. I've tried all the setting thru the quick menus and digging thru the settings. I've tried changing ringtones, using different ringtones, vibration on and off and I can't figure it out. This is a recent problem as the the ringtone did work before but has stopped since. Any help would be appreciated.
sthornton1986 said:
So kind of a weird issue that I've never experienced even on custom Roms. My phones ringtone has stopped working. It will vibrate and always receives calls, I have notification sounds and alarms work just fine but the phone never actually rings it only vibrates. I've tried all the setting thru the quick menus and digging thru the settings. I've tried changing ringtones, using different ringtones, vibration on and off and I can't figure it out. This is a recent problem as the the ringtone did work before but has stopped since. Any help would be appreciated.
Click to expand...
Click to collapse
get zedge from play store get any ringtone download then set as default ringtone see if that works
I'm pretty sure that I've been having issues with it not ringing properly when in my pocket. Either it's not ringing at all or it's so quiet it's inaudible. I just turned off "pocket mode" and "quiet ring on pickup" in sound settings. Haven't got the chance to test whether one of those settings is the cause yet, but I have a feeling one of them is.
Hi, I have recently purchased a Nokia 6.1 (2018 TA-1050). It seems to be working mostly the way I want it to BUT the notification sounds are giving me huge problems. What I mean is, for incoming SMS, Whatsapp, etc. ,these will only cause the phone to vibrate, and a notification icon to appear. I do not get any notification sound.
Also for phone calls, the screen activates, incoming call is shown, phone vibrates, and after a short delay the notification sound activates. It is as if the notification sounds are delayed. Has anyone else come across this problem? Can it be fixed? Any help welcome....
Thanks.
Heya,
so, as the title says, I'm having issues muting the notification and app sounds, while still allowing phone calls to get through and ring the phone out loud.
In the past, this was achievable by the Do Not Disturb mode. Right now however, it doesn't mute notifications anymore, as that is now done by the new "silent" mode. But that one also mutes incoming calls, which is completely unusable for me (I have occasional on-call nights when I need to be available on my phone, even if I'm sleeping, yet find the constant pinging of the apps super annoying).
The only working solution I found was to go into notification settings and block notifications from most of the very frequent apps... Which is annoying, as I also have to not forget to toggle the notifications back the next day.
Is there still a way to achieve the "Mute media and notifications, keep calls" combo in Android 12 + MIUI 13? Thanks!
On most phones the phone ringtone and notification volume is separate, is that not the case in your device?
Confused Gamer said:
On most phones the phone ringtone and notification volume is separate, is that not the case in your device?
Click to expand...
Click to collapse
Unfortunately not, instead, I have media, calls and alarm clock (as seen in the screen).
If I mute media, I still get notification and call sounds. If I mute the bell, I no longer get either. Dnd has no effect on the notification sounds.
Aldenar said:
Unfortunately not, instead, I have media, calls and alarm clock (as seen in the screen).
If I mute media, I still get notification and call sounds. If I mute the bell, I no longer get either. Dnd has no effect on the notification sounds.
Click to expand...
Click to collapse
This certainly sucks, can't every smartphone company share good things from each other instead of adopting all the bad changes. look around on Google maybe there are apps for this.
Aldenar said:
Unfortunately not, instead, I have media, calls and alarm clock (as seen in the screen).
If I mute media, I still get notification and call sounds. If I mute the bell, I no longer get either. Dnd has no effect on the notification sounds.
Click to expand...
Click to collapse
Hey have you found any solution? As I'm also struggling with same problem
It sucks, but until they fix it, you can use this app.
On the downside, it not only mutes sound, but completely mutes the notification including the badges , though. Anyone please post if you have a better solution.
i know im late. but i found a fix. (kinda) if you remove your notification sound completely. through settings, notifications and vobrations, notification sound and then while in the themes app. ringtone, and then no romg tone. even tho i thaught it changed the ringtone. if you go through settings first. ot will change the notification sound and not the ringtone. hope this helped
While waiting patiently for A13 ROMs for my current daily driver to mature a bit more I am using a silent audio file for the notification sound. I can't believe all these years MIUI still doesn't have an option to unlink calls and notification volume.