Develop Bugs

"Un-brick" Imate JasJar After Failed ROM Update

First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick

Did like u said.
Still country id error

works now
thanks

my device t-mobile mda pro jasjar bootloader nope
rsteel1 said:
First time post ...
I recently downloaded the 1.13.53 WWE ROM update from the Imate site and attempted to install it on my JasJar. The update failed leaving my JasJar in boot loader mode. No reset method seemed to work to bring it back up. Subsequent attempts to load the ROM update gave me the dreaded "Country Code" error. Here are the steps I followed to get the ROM update to succeed:
1. Uninstalled ActiveSync 4.0 and installed ActiveSync 4.1 as downloaded from XDA FTP site. Disabled firewall and Anti-virus. Rebooted machine. I am not sure whether this step was neccessary or not but noted that others had some success with this. At this point I was still getting the country code error when trying to install ther update.
2. Run the update but once you get to the first screen that asks you if you want to proceed, switch to the Windows file system using Explorer and set the current directory to your TEMP directory. If you are not sure where this is, open a command prompt (Start - Run - CMD - OK) and type SET. This will display environment variables. Look for the one called TEMP - that is where you want to go.
3. Search for a file called ROMUpgradeUT.exe or RUU.conf anywhere in the TEMP directory or its subdirectories. When you find the correct directory, copy the files to a new location.
4. In the new location, edit the RUU.conf file and add the following text at the end of the file:
[CHECKCEID_TYPE]=1
5. Save the file and then run ROMUpgradeUT.exe
At this point I was able to get past the country code error and the update began. The radio upgrade was the first component and it took the most time (about 10-15 minutes). The other 2 components upgraded the extended ROM and the OS but only took about 5 minutes each.
After getting the completion message on my PC I also noted a "100% complete" message on the JasJar screen. After a hard reset (soft keys and reset) the JasJar came up with the upgraded ROM in place and I was REALLY HAPPY!
I don't know if this will work for anyone else - use at your own risk but I wanted to share what has worked for me.
BTW - many thanks to all the previous posters who left "breadcrumbs" for me to follow in getting my JasJar back. This community is SUPERB!
Thanks again.
Rick
Click to expand...
Click to collapse
this method how?my jasjar can open normal ?

help me
error 101 problem

error 150 problem
MaUpgradeUt_noID trying in my jasjar error problem 150 .whats saying ? problm where? usb dont recognize xp .what must ı do?

please help me im using Vista and cant get connection with my imate to my pc... and what is a radio update if you can help me add my msn!
i dont want to update anymore i just want to get my wm5!

Have a look here:
http://wiki.xda-developers.com/index.php?pagename=FlashVista
Hope it helps,

Tom Tom NAvigator 5 with Mini S

Hi,
Anyone managed to install TOM TOM 5 on the Wizard using WM2005?
Beats the hell outta me!
Installs from SD OK, gets to select voice screen and locks.
Is there a known problem with TOM TOM 5 and WM2005?
I used to use the exact same TOM TOM on my XDA IIs with no probs.
Please share your infinitie wisdom good people of XDA-Developers!
Ta!

They have a free upgrade to support 2005: http://www.tomtom.com/support/index.php?Language=1&query=windows+mobile+2005&FID=3447
Was there any trick to installing it?
I have a copy that installs of an SD card. I copied the program folders to the Mini SD card in my 8125 but the install did not start when I inserted the card. I tried starting the start program manually from both the card and the phone's memory with no luck.
This is also from TOMTOM:
Below is the application that should be used in order to install Navigator 5 to your pocket pc. After downloading this file and saving it to your computer, please execute it. It is best to have your pocket pc connected through ActiveSync while proceeding with the installation. It is best to make sure there are no CDs in your CD drive at the time of downloading and installing this file to your pocket pc.
http://www.tomtom.com/updates/navupd521.exe
Once the installation is finished, please close out all windows that were opened and then place the "application and user manual" CD in the CD drive. The only need for the "application and user manual" disk is for the voices. When you place the “application and user manual” into the CD drive, the CD installer will execute. It is best to cancel the setup however leave the “application and user manual” in the CD drive. Once the setup is cancelled, please execute the 5.21 update again (the file should have been saved to your computer from the original download).
Due to the version of ActiveSync you may be using with your pocket pc (WM 5.0), the installer from the CD will not recognize your pocket pc being connected. This is the reason for using the 5.21 update as an interface. Generally when you download an update from the support section of the website, if there is a TomTom CD in the CD drive at the time of running the update, the update will act as an interface for the CD and allow you to install the information from the CD to your pocket pc.
After executing the 5.21 update again (please make sure the application and user manual CD is in your CD drive), this should allow you to proceed with the installation of the voice file. Please follow through the TomTom resource CD setup (i.e. choose a language, agree to license agreement). Once you are viewing the options menu, you want to choose "add/remove extra features". Then choose "add a voice prompt". Once you choose "add a voice prompt", choose the voice file you would like to hear when traveling. After the voice file has installed fully, please close out all windows and proceed with the installation of the map data. It is best to start with CD 1. If you choose a map file that isn't located on CD 1, the CD will prompt you which CD to switch too. After installing the map data, you should then be ready to activate your maps.
If you experience problems installing the map files due to a “TomTom Setup Application” error, please visit the link below.
www.tomtom.com/3701
The next step would be to activate your device. There are two different codes that are needed in order to activate your new maps. The first code is the product code (15 alpha-numeric code). This code can be found on a small plastic credit card found inside the box the upgrade software was shipped in. The next code you will need is the device code (10 alpha-numeric code). This can be found on the Pocket pc screen. By taking these two codes to www.ttcode.com and entering them in as requested, you will then be provided a third code which is called your activation code (15 alpha-numeric code). Please note this code. It can be used at a later date if needed. Once you have obtained your activation code, click "activate" on the Pocket pc screen. The device will offer a screen where the activation code can be typed into. Once the code has been typed into this screen, choose "done" located on the bottom of the screen. You device should now by fully functional.
Thanks

Got it working on my XDA Mini S. Had to add in some voices manually to get it to work and also added the full UK postal code manually.
Going to bed, but will post the file system breakdown in the next day or so.
Watch this space.

How to install GPS hotfix???

Hi to All,
i've got problem with installation of GPS hotfix which is available on the HTC website. On the Polish version of the website it's stated that the file must be copied to the device and then installed from the device. On English website it says to run the file on the PC when device is conected with AcitveSync.
When i run the file form the device is says that "this is not the correct aplication of Pocet PC". When I run from PC is says that "it not the correct application of windows32" or something like that.
Any ideas what should I do?
Thank you for your help in advance!
Max

just download it from european site, I've got it from there and no problems installing it via PC.

OK I've finally managed to open installation procedure but one more question - is this update will really erase all my data in device(there is such a warning before starting installation procedure)???
Max

its just a gps hotfix, not a rom upgrade, so you will not lose any data or settings

[Q] KUF help

Hi,
I had version 6.2.1 and i root it and everything was great could use the Market (Play) and so on , after upgrading i could still use the market and install things although i read that upgrading to 6.3 kills the root , nevertheless i did KUF and it worked ok and i get the TWRF and i can also get into it , however i would like to know how can i know if my Kindle has been root, entering the Market i see the same application and everything is working OK .
so first question:
1. after KUF how can i know that my kindle has been rooted correctly
2. after finishing the KUF my computer doesn't recognize the Kindle not matter what i do , even try to re-install he drives - strange btw i see in the device manager android phone - android ADB interface , i'm trying a fresh OS.
3. how come i cant see all application in the market only some of them, is it cause the market can see that it's a Tablet
Thanks
Blacknasa

One more small issue
I can transfer many application that arent visible in the market like for instance Kayak however i when i try to install them i got an error that application didn't install, i don't know why , anybody ? is it any log that i can check ?
Tanks for the Help
Blacknasa

To tell if you are rooted, download and install "Terminal Emulator" from the market. From the terminal type "su" without quotes. If your prompt changes from $ to #, or you get a "Superuser" request, you are rooted.
As far as the Market is concerned, only apps that are known to be compatible with your device will show (unless you edit your build.prop). Some will still work but you'll have to download them from other sources i.e. Google search NameofApp.apk...just stay away from paid apps with this method.
Sent from my Amazon Kindle Fire using xda premium

WSReset alternative ?

Recently I run a batch of application updates but Skype update reported error 0x80004005. Uninstall from Start screen app list didn't work but I managed to uninstall it via Storage, App sizes list. New install reports 0x80070002 error on the end (download, restoring user data and installing progress is ok). I have regular 14393.693 build.
On Windows 10 PC version the WSReset.exe tool would probably fix that. Is there any alternative on Mobile OS ? Any other applications works, the Skype installation only is broken.
I already tried delete temporary files, soft reset and log off from Store.
Thanks.