After I install CWM Touch v5.8.1.3 and go into recovery... I get a recovery bootloop... CWM freezes. Then I must reboot and re-flash CWM v5.0.2.7 to get things back to normal. Anyone had this problem? How can I get CWM Touch v5.8.1.3 to install properly?
Heff66 said:
After I install CWM Touch v5.8.1.3 and go into recovery... I get a recovery bootloop... CWM freezes. Then I must reboot and re-flash CWM v5.0.2.7 to get things back to normal. Anyone had this problem? How can I get CWM Touch v5.8.1.3 to install properly?
Click to expand...
Click to collapse
You probably got a bad download
nawww... thanks but I have tried with a few downloads also tried with the odin flashable version... no luck... same crap. No biggie, was just wondering.
Heff66 said:
nawww... thanks but I have tried with a few downloads also tried with the odin flashable version... no luck... same crap. No biggie, was just wondering.
Click to expand...
Click to collapse
Alright, I used odin to flash it and it works with no problem for me. Sorry it's not working for you
Correct procedure for flash CWM and any GB ROM
You should never flash cwm from a previous version, you have to do is flash the new version with Odin, is the best and clean method.
Remember to do all wipes, wipe factory, wipe cache partition, wipe dalvic cache, and flash the darkside wipe tool or in mount and storage option format cache, format system and for a more clean installation format mmc (this option format your internal memory, not your Micro SD Card)
Related
This is the first time i flash my phone to move to the darkside.
T989 running ClockworkMod Recovery 6.0.1.5 , Flashed with DARKSIDE.SUPER.WIPE_EXT4 / CM10 Stable. After complete the flash and stuck on the CM splash screen.
After read the CM10 Thread, that mentioned i should not use the dakrside wipe.
1 - I can boot into CWM mode
2 - Cache and dalvik cache cannot wipe Any suggest that i should proceed next or thats bricked????
3 - If restore, the USB keep prompt error
Thanks
fireharuka said:
This is the first time i flash my phone to move to the darkside.
T989 running ClockworkMod Recovery 6.0.1.5 , Flashed with DARKSIDE.SUPER.WIPE_EXT4 / CM10 Stable. After complete the flash and stuck on the CM splash screen.
After read the CM10 Thread, that mentioned i should not use the dakrside wipe.
1 - I can boot into CWM mode
2 - Cache and dalvik cache cannot wipe Any suggest that i should proceed next or thats bricked????
3 - If restore, the USB keep prompt error
Thanks
Click to expand...
Click to collapse
Your phones fine
If you can get into recovery. wipe data, wipe factory reset, wipe dalvik wipe cache. Flash cm10. Flash gapps. Reboot.
If you can't wipe anything in recovery and it freezes up. Your recovery is broken and you have to reflash it via Odin. Then go back and do what I said above
NEVER USE DARKSIDE SCRIPTS WITH CWM 6.XXXXXX OR TWRP 2.2.XXXXXXX OR 2.3XXXXX
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Sorry for newbie question, when i reflash via odin. Do i process in the phone mode or CWM mode? please advise
garth719 said:
Your phones fine
If you can get into recovery. wipe data, wipe factory reset, wipe dalvik wipe cache. Flash cm10. Flash gapps. Reboot.
If you can't wipe anything in recovery and it freezes up. Your recovery is broken and you have to reflash it via Odin. Then go back and do what I said above
NEVER USE DARKSIDE SCRIPTS WITH CWM 6.XXXXXX OR TWRP 2.2.XXXXXXX OR 2.3XXXXX
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
fireharuka said:
Sorry for newbie question, when i reflash via odin. Do i process in the phone mode or CWM mode? please advise
Click to expand...
Click to collapse
I don't know what your saying. https://www.youtube.com/watch?v=Tcffczu-0qA&feature=youtube_gdata_player. Watch this video. Download the files specified but the only files you will actually need are the Odin app and "Hercules.tar.cwm file. The only steps youd actually need to follow start at 3:50 and end at 6:27. This method will reinstall cwm version 5.0.xxxxx. As usual hold up down power to get into recovery mode. Use dark side super wipe and reinstall ROM and gapps then dark side cache wipe. since it IS the older cwm version 5.0.xxxx you do need the scripts. Once everything looks good and you decide to upgrade your recovery DONT use the scripts anymore. The newer recoveries do the work for the scripts
Edit:
Unlike the video explains you want to enter download mode before connecting your phone to Odin. I think to get into download mode you hold volume up / down then plug USB from pc into phone.. All at the same time
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I was advised that i needed to update my recovery to twrp from cwm recovery to avoid an issue i got while flashing roms (the contents of my sd card would get pushed down into a subfolder of a newly created set of folders) however when i wiped my phone, as i always used to do with CWM twrp seems to have wiped a lot more, its wiped the existing rom, and all the files on my card, so i cant install a new rom. Basically i only have access to twrp recovery mode, how can i get the rom .zips onto my phone to install them? Id really appreciate any help at all, i had no issues flashing with CWM and i really dont know what to do.
download a rom/gapps and use adb to transfer them to your sdcard.. adb command "adb push file.zip /sdcard/file.zip"..
PS- in twrp wiping data wipes EVERYTHING so when you want to wipe before flashing a rom do a factory reset and DONT wipe data
Khizar said:
download a rom/gapps and use adb to transfer them to your sdcard.. adb command "adb push file.zip /sdcard/file.zip"..
PS- in twrp wiping data wipes EVERYTHING so when you want to wipe before flashing a rom do a factory reset and DONT wipe data
Click to expand...
Click to collapse
Thanks for your help, i found a similar problem on another site im halfway through it now, so when i flash roms in twrp i want to do a factory reset? wipe the cache and dalvik cache?
quirkles said:
Thanks for your help, i found a similar problem on another site im halfway through it now, so when i flash roms in twrp i want to do a factory reset? wipe the cache and dalvik cache?
Click to expand...
Click to collapse
this is how i flash roms..
1. factory reset
2. wipe system
3. wipe cahce
4. wipe dalvik
5. flash rom
6. flash gapps
7. flash AK kernel
8. reboot
9. wait 10 mins then do another reboot then enjoy :good:
quirkles said:
I was advised that i needed to update my recovery to twrp from cwm recovery to avoid an issue i got while flashing roms (the contents of my sd card would get pushed down into a subfolder of a newly created set of folders) however when i wiped my phone, as i always used to do with CWM twrp seems to have wiped a lot more, its wiped the existing rom, and all the files on my card, so i cant install a new rom. Basically i only have access to twrp recovery mode, how can i get the rom .zips onto my phone to install them? Id really appreciate any help at all, i had no issues flashing with CWM and i really dont know what to do.
Click to expand...
Click to collapse
You actually only had to update CWM to the latest version to fix that problem
EddyOS said:
You actually only had to update CWM to the latest version to fix that problem
Click to expand...
Click to collapse
eh, what's done is done, if it gives me any trouble ill switch back
Hi all,
i've rooted succesfully mi device with the galaxy note 2 toolkit, and now i want to install CMW recovery.
I've installed the recovery using the toolkit and the process ends without any errors. When i try to reboot my device in recovery mode, my screen goes crazy, it starts flashing for second and does nothing else; i must restart the device using the power button.
I've tried the TWRP recovery and this one works fine.
However, with TWRP i'm not able to flash any rom! i've tried 3 roms but they returns a fatal error...
Where am i wrong?
thanks
I had same use long time ago and I get a working version for @unstableapps in twitter. The link was http://t.co/tbuvmTpKPa but don't know if it still online.
Good luck.
Sent from my GT-N7100 using xda app-developers app
LucaZPF said:
Hi all,
i've rooted succesfully mi device with the galaxy note 2 toolkit, and now i want to install CMW recovery.
I've installed the recovery using the toolkit and the process ends without any errors. When i try to reboot my device in recovery mode, my screen goes crazy, it starts flashing for second and does nothing else; i must restart the device using the power button.
I've tried the TWRP recovery and this one works fine.
However, with TWRP i'm not able to flash any rom! i've tried 3 roms but they returns a fatal error...
Where am i wrong?
thanks
Click to expand...
Click to collapse
use this http://forum.xda-developers.com/showthread.php?t=2028103 works with all custom rom :good:
for flashing
wipe data/factory
wipe cache
wipe dalvic cache
wipe system( if want to completely clean flash)
install zip from sd card
make sure to make a backup of your current rom and efs backup too good luck
shhbz said:
use this http://forum.xda-developers.com/showthread.php?t=2028103 works with all custom rom :good:
for flashing
wipe data/factory
wipe cache
wipe dalvic cache
wipe system( if want to completely clean flash)
install zip from sd card
make sure to make a backup of your current rom and efs backup too good luck
Click to expand...
Click to collapse
Solved! thanks!
Hello! Today i wanted to update to the new 4.4.2 ROM from E-team (DN3 v5). So after i format data, system, internal sd, wipe cache and dalvik cache, i install the new rom. No problem, when the install is finished i wipe cache/dalvik cache and i reboot. After that i'm stuck on boot (samsung logo). Can anyone tell me what did i do wrong? Before updating i had DN3 v3.2 and i had no problems.
P.S. I am using the latest TWRP Recovery.
Hi. I suggest you to format the internal storage with TWRP Recovery. This is a full wipe procedure. After that install the ROM again and reboot. If that does not work check your bootloaders version. Reinstall the boot loader or install a never one. But first try the first step.
Good luck...
Sent from my SM-N9000Q using Tapatalk
Thanks for the reply! I already formatted internal storage when i installed it. I don't understand the thing with these bootloaders. How can I check which version i'm on?
darkn3ss88 said:
Thanks for the reply! I already formatted internal storage when i installed it. I don't understand the thing with these bootloaders. How can I check which version i'm on?
Click to expand...
Click to collapse
Switch to philz ,re do all the wipes for your internal sd card by clicking on "wipe to install a new rom" and wipe cache/partition and by going under advance wipe dalvik cache as well.Flash your rom then. You can switch to philz from twrp by flashing the philz.zip file from here just transfer the zip file to your external sd via card reader and just reboot into your recovery.if you dont have a card reader on you then you can flash philz .tar file in download mode via pc odin.
Philz
darkn3ss88 said:
Hello! Today i wanted to update to the new 4.4.2 ROM from E-team (DN3 v5). So after i format data, system, internal sd, wipe cache and dalvik cache, i install the new rom. No problem, when the install is finished i wipe cache/dalvik cache and i reboot. After that i'm stuck on boot (samsung logo). Can anyone tell me what did i do wrong? Before updating i had DN3 v3.2 and i had no problems.
P.S. I am using the latest TWRP Recovery.
Click to expand...
Click to collapse
do you have the latest TWRP?
if not then you need to update it is has to 2.7.0.0 or above
myk1709 said:
do you have the latest TWRP?
if not then you need to update it is has to 2.7.0.0 or above
Click to expand...
Click to collapse
I already tried with the latest TWRP but didn't manage to get it working.
singhpratik87 said:
Switch to philz ,re do all the wipes for your internal sd card by clicking on "wipe to install a new rom" and wipe cache/partition and by going under advance wipe dalvik cache as well.Flash your rom then. You can switch to philz from twrp by flashing the philz.zip file from here just transfer the zip file to your external sd via card reader and just reboot into your recovery.if you dont have a card reader on you then you can flash philz .tar file in download mode via pc odin.
Philz
Click to expand...
Click to collapse
I just installed the latest philz and bang, it worked! Before installing latest TWRP i had an older version of philz (5.x) and maybe that was the problem. Thanks man, thanks a lot for your help!
So I wanted to go to Lollipop and I happened to flash the twrp recovery for new layout(as i was getting boot loop when flashing the rom with cwm recovery)
The things i tried until now.
1. Installed twrp and formatted it to get the new layout. Wiped everything, system, cache, data, dalvik cache
2. It was supporting MTP so i transferred the roms to the device being in recovery. Installed CM 12 + gapps for lollipop.
3. Rebooted to bootloader again. flashed boot.img, and did fastboot erase cache.
4. Rebooted again and stuck at CM boot logo.
I wiped the cache, dalvik cache(actually did a factory reset in the twrp recovery) and tried installing Resurrection Remix. Again flashed the relevant boot.img too. But the same result..
Did i destroy my phone?
anoopknayak said:
So I wanted to go to Lollipop and I happened to flash the twrp recovery for new layout(as i was getting boot loop when flashing the rom with cwm recovery)
The things i tried until now.
1. Installed twrp and formatted it to get the new layout. Wiped everything, system, cache, data, dalvik cache
2. It was supporting MTP so i transferred the roms to the device being in recovery. Installed CM 12 + gapps for lollipop.
3. Rebooted to bootloader again. flashed boot.img, and did fastboot erase cache.
4. Rebooted again and stuck at CM boot logo.
I wiped the cache, dalvik cache(actually did a factory reset in the twrp recovery) and tried installing Resurrection Remix. Again flashed the relevant boot.img too. But the same result..
Did i destroy my phone?
Click to expand...
Click to collapse
can you enter in recovery ?
wipe dalik,chace,chace,data then go to,mount select system,chace,data,2gb extra data ,and disabel mtp
if your phone dot show up just leave it on select partions to mount ,unplug cable then plug it back,go to device manager btw and see will it show there
dado323 said:
can you enter in recovery ?
wipe dalik,chace,chace,data then go to,mount select system,chace,data,2gb extra data ,and disabel mtp
if your phone dot show up just leave it on select partions to mount ,unplug cable then plug it back,go to device manager btw and see will it show there
Click to expand...
Click to collapse
Yes I can enter recovery. But again I just cant get any lollipop ROM's working. I dont know whether i have to restore to kitkat(i really dont want too..
I dont get it.. Wipe dalvik cache, cache, data and then disable mtp and then enable mtp.. I mean at the end what does this do?
And in the meanwhile did you mean HTC Sync Manager for device manager. FYI I use a mac(if this helps to get into the problem). And i had flashed kitkat roms from the same without a hiccup but lollipop is failing
anoopknayak said:
Yes I can enter recovery. But again I just cant get any lollipop ROM's working. I dont know whether i have to restore to kitkat(i really dont want too..
I dont get it.. Wipe dalvik cache, cache, data and then disable mtp and then enable mtp.. I mean at the end what does this do?
And in the meanwhile did you mean HTC Sync Manager for device manager. FYI I use a mac(if this helps to get into the problem). And i had flashed kitkat roms from the same without a hiccup but lollipop is failing
Click to expand...
Click to collapse
its hard to explain with recovery you can mount ur sdcard and put another room and install ,the easy way its to start from the begin and install clear CM12 and you will get out from bootloop that help me i was in bootloop like 3920489208420984920 times hahaha
anoopknayak
Have you solve the bootloop issue? I am having the same problem on my International One X
thanks
Probably both of you encountered the same problem as me.
If you are S-on, you have to flash rom and kernel separately. Also, if you try to revert any changes with twrp you have to flash kernel you were using during creation of backup, and then restore backup.
In other words: your current kernel is incompatible with rom.
Mwys
Yes i am S-ON. Can you tell me what the steps are to flash the kernel? I do not have a backup.
What is did was flash New Layout TWRP, did a complete wipe, then copied the ROM and G-Apps zips to the phone, installed them and then flashed boot.img.
Thanks for the help
Yup I also tried the same. but no luck. I tried to revert back to kitkat(by installing cwm, format the storage, sideloaded the ROM and gapps, flashed the boot.img) and still again in bootloop.
Sorry for the delay. I was a lot too busy with work.