Related
Hi All,
I just formatted my device using MTTY but I forgot to copy over the firmware! My problem is now I can't access the device via my PC to copy over the firmware. My PC does not recognize the phone as storage in trigger mode and my phone cannot boot into anything as it has no firmware. Is there a way in which I can access the storage of the device so I can copy over the firmware and flash my phone?
Thanks!
ek5932 said:
Hi All,
I just formatted my device using MTTY but I forgot to copy over the firmware! My problem is now I can't access the device via my PC to copy over the firmware. My PC does not recognize the phone as storage in trigger mode and my phone cannot boot into anything as it has no firmware. Is there a way in which I can access the storage of the device so I can copy over the firmware and flash my phone?
Thanks!
Click to expand...
Click to collapse
Try flashing from your computer - press volume down button and then press start button, that should get you in the BootLoader mode (Tri-color)..plug in your usb and flash the rom.
ek5932 said:
Hi All,
I just formatted my device using MTTY but I forgot to copy over the firmware! My problem is now I can't access the device via my PC to copy over the firmware. My PC does not recognize the phone as storage in trigger mode and my phone cannot boot into anything as it has no firmware. Is there a way in which I can access the storage of the device so I can copy over the firmware and flash my phone?
Thanks!
Click to expand...
Click to collapse
Go to my Sig, use Custom RUU, in radio pos, to flash th NBH
I was trying to root my cousin's evo today. I rooted and loaded custom roms on mine yesterday and it went smoothly with unrevoked 3. But this one said that the firmware may be too new. So i tried putting a pc36img file on it and as it updated it bypassed the bootlader and when it gets to radio V2 it vibrates a few times then says fail-PU and the rest go through ok. then at the end it says update fail partition update fail. and when i try to reboot it stays stuck at the white htc evo screen. i can pull the battery out and get it back to the bootloader but i cant recover it cuz its not rooted. I NEED HELP FIXING THIS what do i do?
From the bootloader, select clear storage to perform a factory reset, then try to run unrevoked again.
I selected clear storage then it rebooted after 5 seconds. But it stays stuck at the white htc evo screen again. I have my rooted phone right here would putting my sd in his phone do anything? What else can i do?
The computer wont recognize it as a drive so i cant put new files in it.
http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip Rename the file to PC36IMG, the flash it in the bootloader. Its an RUU of the 3.70 stock image. After that runs, try to re-root.
but i cant access the sd card through my computer to even rename it
errie806 said:
but i cant access the sd card through my computer to even rename it
Click to expand...
Click to collapse
So are you saying the sdcard is dead, or just not through the phone?
Cuz you can take the sdcard out from under the battery and mount it via adapter to the pc, or when downloading it, save it as PC36IMG one time.
Have access to another SD card?
heres no way i can make it recognize it through the bootloader? i dont have an adapter. what if i take the sd card out of my phone (htc evo rooted with warm twopointtwo.) and put it in his? can i recover the phone like that?
errie806 said:
heres no way i can make it recognize it through the bootloader? i dont have an adapter. what if i take the sd card out of my phone (htc evo rooted with warm twopointtwo.) and put it in his? can i recover the phone like that?
Click to expand...
Click to collapse
Only if you do what I said and put it on there. Or run an ruu exe, and connect the phone via fastboot.
ok since i dont have an adapter what im doing is putting another 1gb sdcard i found in my phone and im going to put the pc36img on the root of this one. then try to boot the broken phone with this sdcard. does that sound right? also that link for the file doesnt work.
Sounds good
> http://www.shipped-roms.com/shipped...15.00.11.19_NV_1.90_release_161482_signed.exe
Boot the phone into fastboot, connect to pc, once it shows up as fastboot usb on the phone, run the ruu exe.
wait i found an sd card adapter now. so what do i do next?
teh roxxorz said:
Sounds good
> http://www.shipped-roms.com/shipped...15.00.11.19_NV_1.90_release_161482_signed.exe
Boot the phone into fastboot, connect to pc, once it shows up as fastboot usb on the phone, run the ruu exe.
Click to expand...
Click to collapse
so i download this file. rename as PC36IMG. then put on the root of the phone. then i boot into fastboot and run the update when it finds it?
errie806 said:
so i download this file. rename as PC36IMG. then put on the root of the phone. then i boot into fastboot and run the update when it finds it?
Click to expand...
Click to collapse
Well now that you got it on there, no need for fastboot, just select update when prompted, then reboot.
teh roxxorz said:
Well now that you got it on there, no need for fastboot, just select update when prompted, then reboot.
Click to expand...
Click to collapse
so i downloaded that file renamed it PC36IMG placed it on the root and held the volume down button and the power to get to the bootloader but it wont update the phone with that file. what next?
errie806 said:
so i downloaded that file renamed it PC36IMG placed it on the root and held the volume down button and the power to get to the bootloader but it wont update the phone with that file. what next?
Click to expand...
Click to collapse
What do you mean it won't update. Then you try the fastboot and run the exe from the pc.
teh roxxorz said:
What do you mean it won't update. Then you try the fastboot and run the exe from the pc.
Click to expand...
Click to collapse
it doesnt find the pc36img file and update the phone. how do i fastboot and run it from the pc? what do i click on
errie806 said:
it doesnt find the pc36img file and update the phone. how do i fastboot and run it from the pc? what do i click on
Click to expand...
Click to collapse
Its named PC36IMG.zip, not PC36IMG.zip.zip? And from the bootloader, select fastboot , connect to pc, when it shows up as fastboot usb on the phone then run the ruu exe from the pc. I linked you like 3 posts up.
teh roxxorz said:
Its named PC36IMG.zip, not PC36IMG.zip.zip? And from the bootloader, select fastboot , connect to pc, when it shows up as fastboot usb on the phone then run the ruu exe from the pc. I linked you like 3 posts up.
Click to expand...
Click to collapse
the file i downloaded from you is a .exe file i renamed it so its now PC36IMG.exe. am i supposed to name it PC36IMG.zip so that its PC36IMG.zip.exe?
errie806 said:
the file i downloaded from you is a .exe file i renamed it so its now PC36IMG.exe. am i supposed to name it PC36IMG.zip so that its PC36IMG.zip.exe?
Click to expand...
Click to collapse
http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip This was the file you needed to rename to PC36IMG..that's probably why it didn't update. regardless, connect the phone into fastboot like I said, then run the exe file on the pc.
Guys need some help here.
I was previously on 1.28 with ARHD 4.1.
Recently tried to flash to ARHD 5.1 but during flashing, phone was bricked. It's currently stucks at the htc logo homescreen.
I can enter CWM into recovery mode but I do not have any existing ROMS in my SDcard. I believe we can write into the SD card by using the ADB commands in terminal. But my ADB devices list is being shown as empty
I have installed the latest htc drivers. I suspect this could be because one have to manually select the USB debugging mode on the phone upon plugging in. But since my phone is bricked, how do I go about enabling this option? Kind of lost now
Any help would be greatly appreciated!
Cheers!
If you can enter in recovery then it is not bricked. Try to mount storage in recovery and put zip file and reflash. Sorry cant help much myself but dont worry someone will tell you exactly what to do. I can reassure you, your phone is not bricked.
Cheers
If you can enter recovery, under mounts and storage or something there's an option called Mount USB Storage. Use that to connect your phone like a thumbdrive to your computer and you can flash any zip file from there. Also, did you flash the boot.img for ARHD via fastboot?
tlkh said:
If you can enter recovery, under mounts and storage or something there's an option called Mount USB Storage. Use that to connect your phone like a thumbdrive to your computer and you can flash any zip file from there. Also, did you flash the boot.img for ARHD via fastboot?
Click to expand...
Click to collapse
yes. i had flashed the boot.img file prior to it. i had tried the mount usb storage option but my computer ( have tried both mac & pc) , doesn't seem to pick up the device.
http://forum.xda-developers.com/showthread.php?t=1609190
Don't worry you can push files thru adb on to the sdcard, i did it few days back to recover from a similar situation.
The way to get adb working is by booting the phone directly from the recovery image rather than using the recovery on your phone.
Firstly, in case you aren't already using it, get the latest CWM recovery so that you may charge your phone in case its low on battery.
Secondly, get into fastboot mode and boot directly into recovery. (Not very sure about the syntax right now so not writing it here, search the forum.. its there somewhere)
Next, make sure sdcard & data are mounted in the recovery under "mounts & storage".
Now you can check if adb is working thru devices (most probably it should). Once that is confirmed, you are ready to push files thru adb & flash them.
Hope this helps...
problem solved. +)
cheers to all!
have a great day ahead!
Hi everyone!
I was trying to install Cyanogenmod on my LGOG F180S, Im new to everything T_T
I already installed TWRP/freegee... but I forgot to insert the custom rom ZIP on the internal storage... And then the back ups I made was took out, and there is no backup currenty on the internal storage. And also the system folder was erased, the main reason why there is no OS....
How do I access the internal storage so I can put in the ZIP for custom rom? I can still boot to recovery for TWRP by pressing vol up+down.
PLEASE HELP! Thanks for all the reply. I just need a tool to access the internal storage to put the custom ROM zip file into the internal storage.
lancelotconquista said:
Hi everyone!
I was trying to install Cyanogenmod on my LGOG F180S, Im new to everything T_T
I already installed TWRP/freegee... but I forgot to insert the custom rom ZIP on the internal storage... And then the back ups I made was took out, and there is no backup currenty on the internal storage. And also the system folder was erased, the main reason why there is no OS....
How do I access the internal storage so I can put in the ZIP for custom rom? I can still boot to recovery for TWRP by pressing vol up+down.
PLEASE HELP! Thanks for all the reply. I just need a tool to access the internal storage to put the custom ROM zip file into the internal storage.
Click to expand...
Click to collapse
I'm also new to android but i believe the only option you have now is to restore to stock and then re-root and put zip in storage.
see if you can go into download mode
----> turn off your phone, press both "Volume Up and Volume Down" button simultaneously
then plug in the usb cable into your phone n computer.
Sent from my LG-F180K using Tapatalk
lancelotconquista said:
How do I access the internal storage so I can put in the ZIP for custom rom? I can still boot to recovery for TWRP by pressing vol up+down.
Click to expand...
Click to collapse
If you are able to ge to TWRP recovery, then the easiest thing for you is to use ADB. Two options: adb push, and adb sideload. Learn about it - there is a lot of info here on XDA on how to set up and use it. This is not specific to a particular phone; it's a very handy tool you can use with any Android device.
Another option would be to flash a stock KDZ, and start the whole process all over again.
kt-Froggy said:
If you are able to ge to TWRP recovery, then the easiest thing for you is to use ADB. Two options: adb push, and adb sideload. Learn about it - there is a lot of info here on XDA on how to set up and use it. This is not specific to a particular phone; it's a very handy tool you can use with any Android device.
Another option would be to flash a stock KDZ, and start the whole process all over again.
Click to expand...
Click to collapse
Thanks very much I'll try the sideload method first, but if worst comes to worst ill try to flash it.
This will be a veeeery steep learning curve for me :v
kt-Froggy said:
If you are able to ge to TWRP recovery, then the easiest thing for you is to use ADB. Two options: adb push, and adb sideload. Learn about it - there is a lot of info here on XDA on how to set up and use it. This is not specific to a particular phone; it's a very handy tool you can use with any Android device.
Another option would be to flash a stock KDZ, and start the whole process all over again.
Click to expand...
Click to collapse
tried to use adb sideload / push:
http://forum.xda-developers.com/showthread.php?t=2317986 <-for HTC One, but the idea is the same
to be sure I also followed this: http://forum.xda-developers.com/showthread.php?t=2272266
When I try to connect ADB sideload on cmd, and type 'adb device', its saying 'List of Devices Attached' but its not displaying my device
I have all the latest drivers for my F180S, including LG United Mobile Drivers... etc etc.
But when I check my device manager, it says 'LG-180S' (no F, weirdly) so its being detected
When I saw that its not working, I tried to re-flash it with official ROM, I followed instructions here:
http://forum.xda-developers.com/showpost.php?p=44874388&postcount=36
it says to 'press vol up+down then connect to computer'
when I try to do it, nothing happens, first its showing that its charging, then it flashes 'LG logo' for 0.5 sec, then its showing a fully charged battery, then a blank screen (the screen is lit up, but theres nothng, just black)
HELP T_T
lancelotconquista said:
tried to use adb sideload / push:
http://forum.xda-developers.com/showthread.php?t=2317986 <-for HTC One, but the idea is the same
to be sure I also followed this: http://forum.xda-developers.com/showthread.php?t=2272266
When I try to connect ADB sideload on cmd, and type 'adb device', its saying 'List of Devices Attached' but its not displaying my device
I have all the latest drivers for my F180S, including LG United Mobile Drivers... etc etc.
But when I check my device manager, it says 'LG-180S' (no F, weirdly) so its being detected
When I saw that its not working, I tried to re-flash it with official ROM, I followed instructions here:
http://forum.xda-developers.com/showpost.php?p=44874388&postcount=36
it says to 'press vol up+down then connect to computer'
when I try to do it, nothing happens, first its showing that its charging, then it flashes 'LG logo' for 0.5 sec, then its showing a fully charged battery, then a blank screen (the screen is lit up, but theres nothng, just black)
HELP T_T
Click to expand...
Click to collapse
Reboot to TWRP and connect your device to your PC.
Open device manager.
Right click at the unknown device (LG-180S), choose "update driver software"
Choose "Browse my computer for..."
Click "Let me pick from a list..."
Choose "ADB Interface", click next
Choose "Android Sooner Single ADB Interface"
continue until the driver installation complete.
Now you can use adb push, or sideload to fix your phone.
When you check using adb devices, it will list your device as recovery
kt-Froggy said:
If you are able to ge to TWRP recovery, then the easiest thing for you is to use ADB. Two options: adb push, and adb sideload. Learn about it - there is a lot of info here on XDA on how to set up and use it. This is not specific to a particular phone; it's a very handy tool you can use with any Android device.
Another option would be to flash a stock KDZ, and start the whole process all over again.
Click to expand...
Click to collapse
arasyi said:
Reboot to TWRP and connect your device to your PC.
Open device manager.
Right click at the unknown device (LG-180S), choose "update driver software"
Choose "Browse my computer for..."
Click "Let me pick from a list..."
Choose "ADB Interface", click next
Choose "Android Sooner Single ADB Interface"
continue until the driver installation complete.
Now you can use adb push, or sideload to fix your phone.
When you check using adb devices, it will list your device as recovery
Click to expand...
Click to collapse
Thanks! Now another question...
Ive pushed the TWRP backups back (The TWRP folder, which includes a file named ".twrps" and then a folder named backups. But when i click restore on TWRP recovery, theres nothing displayed on restore :/ How can I restore it at least?
EDIT: nevermind, I put a name on the .twrps file (changed it to test.twrps) and it worked
Thanks anyway for the device manager trick! I would have not done it witout your help T_T Thanks thanks!
Hello Users,
I have a Asus Zenfone 2 [Z00a]. Yesterday I want downgrade my phone to Stock Rom (Android 5). After I installed some files with Adb on my Pc, I restarted my Phone and I want to go the Recovery Mode. Now my Recovery Mode doesn't functionate. When my Phone start I come into Bootloader Mode instantly without push any buttons on my Phone. When I selected the Recovery Mode with the Power Button. My Phone restart automatic and the Bootloader start again.
I hope you can help me.
Scoocyjuice
Scoocyjuice said:
Hello Users,
I have a Asus Zenfone 2 [Z00a]. Yesterday I want downgrade my phone to Stock Rom (Android 5). After I installed some files with Adb on my Pc, I restarted my Phone and I want to go the Recovery Mode. Now my Recovery Mode doesn't functionate. When my Phone start I come into Bootloader Mode instantly without push any buttons on my Phone. When I selected the Recovery Mode with the Power Button. My Phone restart automatic and the Bootloader start again.
I hope you can help me.
Scoocyjuice
Click to expand...
Click to collapse
flash boot.img, recovery.img from fastboot
sukhwant717 said:
flash boot.img, recovery.img from fastboot
Click to expand...
Click to collapse
My Computer doesn't find my phone when I connected with a cable.
Tried different USB cables and USB ports?
Scoocyjuice said:
My Computer doesn't find my phone when I connected with a cable.
Click to expand...
Click to collapse
when you connect ur phone to pc does pc make any detection sound or not. open device manager and remove and connect phone to pc. see if any change happens there
Can you send me the flash.img and the TWRP Recovery for my Asus Zenfone 2?
sukhwant717 said:
when you connect ur phone to pc does pc make any detection sound or not. open device manager and remove and connect phone to pc. see if any change happens there
Click to expand...
Click to collapse
. After two mouth my PC can see my Asus and Minmal ADB can see my Asus too. What's the next step?
Scoocyjuice said:
. After two mouth my PC can see my Asus and Minmal ADB can see my Asus too. What's the next step?
Click to expand...
Click to collapse
flash raw firmware..
sukhwant717 said:
flash raw firmware..
Click to expand...
Click to collapse
Without any Recovery? I've tried to install TWRP on my Asus. The Pc said: The Installation ist successfully and when I go to the Recovery Mode on my Phone it is the same as before. Yesterday I put out the SD-card of my Phone and I want to copy the data on my Pc. My Pc said the SD-card hat a wrong Patition. I think that's is the Problem!
Scoocyjuice said:
Without any Recovery? I've tried to install TWRP on my Asus. The Pc said: The Installation ist successfully and when I go to the Recovery Mode on my Phone it is the same as before. Yesterday I put out the SD-card of my Phone and I want to copy the data on my Pc. My Pc said the SD-card hat a wrong Patition. I think that's is the Problem!
Click to expand...
Click to collapse
as you stated you are stuck in fastboot mode. you can flash firmware in fastboot mode
sukhwant717 said:
as you stated you are stuck in fastboot mode. you can flash firmware in fastboot mode
Click to expand...
Click to collapse
Which commad must I need for install that. Can you send me the command for me?
Scoocyjuice said:
Which commad must I need for install that. Can you send me the command for me?
Click to expand...
Click to collapse
see section install firmware without AFT
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785