After dialing the USSD code, we receive a response from Network provider.
In order to select a suitable option, we need to input a number.
However if the USSD response is too large, the textbox to enter an option is not visible. Hence we cannot access keyboard and enter the relevant option.
A workaround here is to long press the Menu button which enables the keyboard.
Is there any other option?
Related
Hi,
I use the GSM codes alot, for exemple #21# to cancel call forwarding, etc. I find it faster than drilling down menus. When I call directly or thru the contacts manager (I made contacts for the codes), everything goes fine. If however I map the contact to the quick dial slot on the home menu OR in a quick dial slot on a cube, the phone gives me an error message. Anyone has a solution?
Also, I recently installed a profile manager with the ability to launch programs with command line parameter when certain conditions are met (I would like the phone to initiate call forwarding when the AC is plugged in), anyone know how I can initiate a call to a specific number (gsm code in my case) from the command line?
Thanks for your help
Wilgar
I have this problem.
I have a contact. He has two mobile numbers. I add both numbers to this contact.
I cannot seem to be able to send a message to the secondary number . It just will not show up when I type the "Name" in the to: field when writing a new SMS.
It only displays numbers marked as "Mobile"
The secondary one is marked as "Home"
I have options for: home, company, work, car.. etc, none of them work.
I cannot send a message even from the contacts screen..,,
How do I resolve this???
I just checked. It totally works fine. Send a new sms. put your cursor where you would type the name and press enter. you get the contact list. select contact and number voila.
next time, it is already in your messages.
yes, saved my day, just checked myself, never thought of pressing enter with the "to:" field empty.
still it should have had an option for setting a secondary mobile.... maybe some registry hacking????
I also noticed this barf today. If you type in the beginning of a person's name to the "TO:" field, it autofills it nicely, but automatically assumes the "Mobile Phone" number field will be used and there's NO way to change it.
The alternative way (press ENTER in the empty TO:-field) works, but again is an extra step too far.
The Windows UI guys really need to get their act together (maybe a bit those TF3D guys too). I'd expect this from a designer temp for his summer job, but not in a mass-market v.6 release in 2009!
I always have this problem,
Pressing ENTER works fine I see. I usually started up a new SMS, then went to "Menu > Add Recipient" and then the contact list is openend too ...
I have the same problem with two persons with alike names:
For example:
Tom Vaan
and
Tom Vaander
In the To: field I type Tom and only get the "Tom Vaan", no way to change it to "Tom Vaander"
vasra said:
The alternative way (press ENTER in the empty TO:-field) works, but again is an extra step too far.
Click to expand...
Click to collapse
You can also tap on the "TO:" text.
I found these codes used on the dial pad of Nokia phones. I've tried a couple but since I have no knowledge of them I figured I'd post them and hope a more experienced person could educate us. Enter code and hit call button. I highlighted the ones I tried with the results I experienced. All the messages displayed in top left corner via bubble box.
##634# installed the Diag app
##3282#- Field Test
Nokia Code function
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR) .
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
*#4720# With this Nokia code you can deactivate the Half Rate Codec.
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type .
*#9999# Phones software version if *#0000# does not work.- neither code gave anything more then an error.
*#06# For checking the International Mobile Equipment Identity (IMEI Number) .- It works! Displays your phones IMEI #
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
*#147# This lets you know who called you last (Only vodofone).
*#1471# Last call (Only vodofone) .
*#21# This phone code allows you to check the number that "All Calls" are diverted to.
*#2640# Displays phone security code in use .
*#30# Lets you see the private number.- When you enter code a message comes up stating " Service enabled " ,but I'm not sure what it does.
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to .
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to .
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores.
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible .- I'm interested in this but haven't tried it.
*#7760# Manufactures code.
*#7780# Restore factory settings.
*#8110# Software version for the nokia 8110.
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
*#94870345123456789# Deactivate the PWM-Mem.
**21*number# Turn on "All Calls" diverting to the phone number entered.
**61*number# Turn on "No Reply" diverting to the phone number entered .
**67*number# Turn on "On Busy" diverting to the phone number entered .
12345 This is the default security code .
press and hold # Lets you switch between lines.
Click to expand...
Click to collapse
what does it means when i typed some code in and it said, " unexpected data value"?
Probably what is sounds like...you did something unexpected... ie.. the result was unexpected...
Its probably a generic error that is trying to say "I don't know what you did but stop that"
magicbullet said:
what does it means when i typed some code in and it said, " unexpected data value"?
Click to expand...
Click to collapse
You should not need to press dial to input the code. Mostly likely the code tried is not supported by the handset. That is a very generic list of Nokia codes, some will work and others will not.
I thought ##634# installed the Diag app. ##DATA# Just gives you cell info and tests.
Subscribed. Curious to see where this goes. Some of those codes look interesting and makes me wonder if there are any others
A lot of these don't work on ATT Lumia 900
So how do you get the "*" to work? Long pressed and typed in various ways.
Sent from my Lumia 900 using Board Express
is there a way to block an area code?
i keep getting a phone calls from the same area which i don't associate at all
and it's getting more and more annoying lately, get at least 3 calls from same area in a day
and hi, I'm new here
Open the Phone app.
Touch the Menu key to the left of the Home button and tap "Call Settings".
Tap "Call rejection".
Ensure that "Auto reject mode" is turned on.
Tap "Auto reject list".
Tap "Create".
Enter the area code in the Number field.
Tap "Match criteria".
Tap "Starts with".
Tap "Save".
NOTE: In order for this to work correctly, you must add the international dialing code and the country code in addition to the area code.
For example, if you wanted to block all calls from numbers with an area code of 866, you would need to put in +1866 in the Number field.
Going forward, the phone will automatically reject any phone calls from numbers beginning with the area code that you specified. Hope this helps, have a great day!
Hello. I get the message, but I cannot send. The message center number: +905598008000 please help me. SMSC part of what is to be entered? Thanks. Country:Turkey avea
I've accomplished, how is that? ı have nexus 5
Dial *#*#4636#*#* then go to Phone Information you can see the “SMSC: ” field.
Tip: DON’T PRESS UPDATE, PRESS “REFRESH” TO SEE THE CURRENT SETTING!!!
For example if actual SMSC number is: +447785016005, however inputting this into the field and hitting update just produces “update error”. The issue is that this needs to be translated into PDU format (Protocol Description Unit) and you can do that here:
http://www.twit88.com/home/utility/sms-pdu-encode-decode.
For the number above, this turns out to be 0791447758100650
For some people, entering the PDU number above into your SMSC field in the testing menu and pressing “update” will have the desired effect but for me, the “update” button won’t work unless you have a “+” in front of the number which is no use at all.
The solution? Take the SIM card out and stick it in a non-android phone , go to the messageing app, settings, message centre number and enter the real number, i.e. +447785016005.
Save, exit, power off, replace SIM into Android phone, job done.
Sent from my Galaxy Nexus using xda premium