Develop Bugs

Just Got This Case.

EDIT; I am placing all of the pics I've posted in this thread below and removing them from later posts. This needed cleaned up plus it should make it easier for people to get a better idea of how they look when you get more than one and trade out the parts. More colors and pictures in the next few days...
I just got one of these and so far I have to say that I am impressed. The plugs that fit the earphone jack and the hdmi/micro usb ports fit remarkably well. I think that I would like it more if the colored plastic piece were a little less slippery. But it is the 'rubberized' plastic so it isn't that bad.
Another EDIT; After owning this for a few months I have to say that the plastic hasn't turned out to be that slippery at all. Just about right for staying on the dash (ish) and getting it in and out of my pocket. And I've decided it is more of a 9/10 to me. And for 10 to 12 bucks shipped, what's not to like.
Thanks garrett_tx for this Amazon link.
garrett_tx said:
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=mesh+atrix+case&x=0&y=0
found them on amazon if anyone would prefer them.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks goto Obartuckc for this photo...
Obartuckc said:
I have this case as well--white under with black gray outside--and love it. I've had it bout 2 weeks now and it's holding up quite nicely. =)
Click to expand...
Click to collapse
(Thanks to my Wife for holding the phones for me.)

Awesome, thanks for the review. I was just looking at this case maybe like 2 days ago.
Could you answer a couple of questions? -
- how good is it in protecting the phone if i drop it for example?
- how much thicker does it make the phone look?
- is it possible that the part of the case which "clips on" on the front of the phone can leave scratches?
- does it come with a screen protector?
THANKS!

xploited said:
Could you answer a couple of questions?
Click to expand...
Click to collapse
Edit; Pics moved to original post.
- how good is it in protecting the phone if i drop it for example?
Not sure. Haven't dropped it yet. But as you can see it is a two piece case.
The corners are doubled up with both the plastic and silicone. So I expect the case to take the hit, and not the phone.
- how much thicker does it make the phone look?
Not much.
- is it possible that the part of the case which "clips on" on the front of the phone can leave scratches?
The silicone is between the outer case and the phone, so not a problem.
- does it come with a screen protector?
Nope.
On a side note. I am ordering another one, maybe two. I like the fact that the pieces can be mixed and matched.
Also, It is a little more difficult to use with the docks because of the flap, but not impossible.
Hope that helps.

looks like a good case and there are many cool colors combinations...
i might take one of these.
thanks!

Great review, thanks a lot. And for 2 bucks I will definitely have to try it.

Interesting. Does the silicone case feel good without the hard part?

http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=mesh+atrix+case&x=0&y=0
found them on amazon if anyone would prefer them.

thomorph said:
Interesting. Does the silicone case feel good without the hard part?
Click to expand...
Click to collapse
I removed the hard part and messed with it a little. I guess it feels ok. Without the molded plastic the silicon part is pretty loose. The sides are extra loose. The ends seem ok at best. I don't think that it would just fall off or anything while holding it. But going in and out of a pocket might be a drag.

thanks I think I will buy one on amazon, price seems more interesting

thomorph said:
thanks I think I will buy one on amazon, price seems more interesting
Click to expand...
Click to collapse
Yeah, the price looks good there too. I don't have Amazon Prime so the shipping would add 3 bucks to the total. Makes it around a dollar more than the ebay price for me. Another example of why I really need to kick Netflix and get Prime...

only certain items get "prime" status, on the case i would have to pay the 3 dollars even though i have prime
just depends on the seller on amazon

I've got this case since 4days.
Good quality/price, the silicone alone feet not so good but with the hard part it's ok.

I have this case as well--white under with black gray outside--and love it. I've had it bout 2 weeks now and it's holding up quite nicely. =)
~Sent from My Unlocked, Rooted, Shady Blued, and Pi-Crusted 1.3gHz Atrix 4G~

garrett_tx said:
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=mesh+atrix+case&x=0&y=0
found them on amazon if anyone would prefer them.
Click to expand...
Click to collapse
Forget a case, I'm gonna get some tricked out speakers for my huffy at the bottom of the page!
Sent from my MB860 using Tapatalk

just got this case ordered today cant wait to get it it looks nice

fleurdelisxliv said:
just got this case ordered today cant wait to get it it looks nice
Click to expand...
Click to collapse
You'll like it unless you are docking the phone constantly. It will dock, just not very well. I don't dock mine much so it isn't an issue. I ended up getting the black/red and the red/black cases. Now I can mix and match, and have a totally red or black case or leave them as they are. I really dig it all red or all black tho.

so this case can be use with the HD dock too?

neotekz said:
so this case can be use with the HD dock too?
Click to expand...
Click to collapse
Well sort of... You have to hold the rubber thingy that covers the mini usb and hdmi sockets. And once you get it in the dock the fit isn't that great. Loose and wobbly, but functional. Other than that it's a great case.

I do love this case alot i have the all black one

I got an outterbox... was actually disappointed in it. I dropped my phone from about 5 feet, bobbled it till it dropped, and it ended up landing on the top side. I picked it up and saw no physical damage, but the digitizer was not responding toward the top. The notification still works, but just underneath it to about a half inch below all the way across doesn't work. Screw you outterbox!
Sent from my MB860 using xda premium

[MOD] Carbon Fiber battery cover

MY VERY FIRST OP
Just thought i would share this with the community. It's called high performance carbon fiber vinyl. The great thing is that it does not leave any adhesive residue. I just slowly, carefully tailored it with a razor blade on top of the original battery cover. A blow dryer made the vinyl much more "compliant" and flexible. Hope you like it. I'm trying to do it with white carbon fiber vinyl next. Please let me know what you think...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Very nice. I have a sheet of this stuff at home, I'm probably gonna do this too.
Sent from my SGH-T989 using xda premium

i think this should go in the Accessories section but nice job!

talltexan said:
i think this should go in the Accessories section but nice job!
Click to expand...
Click to collapse
I think you might be right... LOL
Can it be moved?

A mod could move it if you msg one. (not sure who to msg lol)

I actually still have some from when I tried this on my vibrant. Didn't work out well then based that battery door was so oddly shaped. May go either this a shot. Keep us updated on how well it lasts.
Sent from my SGH-T989 using Tapatalk

adamboyd83 said:
I actually still have some from when I tried this on my vibrant. Didn't work out well then based that battery door was so oddly shaped. May go either this a shot. Keep us updated on how well it lasts.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
If you're using the 3m di-noc variant, it's practically bulletproof. The 3m material isn't even vinyl, it's pvc, which is why it's so damn durable. I wouldn't hesitate putting it on anything I want to keep looking nice. The look isn't for everyone though. And depending on how tight/small the corners need to be, it might not be a good fit.

Because the battery cover of the t989 is textured, the vinyl does not stick very well. like I previously mentioned, I used a blow dryer to make it stick much much better. I also have it in a clear hard/soft silicone gel skin so it should last pretty much forever.
Also if you like this mod or it inspired you to try something similar please hit the thank you button...
Sent from my SGH-T989 using xda premium

that looks legit!

White CF would look nice.

I will be ordering the white soon... kinda expensive... but when I am done I will show it to you...
Actually I plan on doing a white conversion for my wife... I am looking into purchasing the equipment to cut the skin for the face... I will report back soon...

For the Vibrant i know they had a white sticker you could put on the front. Sounds cheap i know but it looked pretty slick. The only thing i noticed was a small ridge around the face of the phone however that was kinda nice also for operating the phone without looking.
http://forum.xda-developers.com/showthread.php?t=767343

If you do..let me know. I would buy a kit
horatiob said:
I will be ordering the white soon... kinda expensive... but when I am done I will show it to you...
Actually I plan on doing a white conversion for my wife... I am looking into purchasing the equipment to cut the skin for the face... I will report back soon...
Click to expand...
Click to collapse
Sent from my SGS2

Thing is that this is only a sticker and unless you can get the sticker to fold under the edge of the battery cover and have the battery cover sit properly.. the stick will just peel up.

I made one as well, if anyone is interested let me know. Came out pretty well.
Sent from my SGH-T989 using XDA App

amaesing said:
I made one as well, if anyone is interested let me know. Came out pretty well.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
NICE!!!! Excellent job!!!!
How difficult was it? also, you could hit the thank you button... just saying ;-)

firebane said:
Thing is that this is only a sticker and unless you can get the sticker to fold under the edge of the battery cover and have the battery cover sit properly.. the stick will just peel up.
Click to expand...
Click to collapse
Not really... When this stuff sticks it aiint going no where (if applied properly.) Unlike stickers that wear and tear with time. This stuff is harder to remove with time... and it's not just a sticker... this is almost indestructible PVC...

horatiob said:
Not really... When this stuff sticks it aiint going no where (if applied properly.) Unlike stickers that wear and tear with time. This stuff is harder to remove with time... and it's not just a sticker... this is almost indestructible PVC...
Click to expand...
Click to collapse
Id be hesitant to put anything that permanent on it. What if you get sick of it?

Wareazy said:
Id be hesitant to put anything that permanent on it. What if you get sick of it?
Click to expand...
Click to collapse
by that time we should have battery covers on ebay

Wareazy said:
Id be hesitant to put anything that permanent on it. What if you get sick of it?
Click to expand...
Click to collapse
If you get sick of it just peel it off.. It should leave no residue behind... This stuff is unbelievably good...
and come on... who's gonna get sick of this look? ;-)

DIY panda phone

Finaly got a white phone returned. Another tech at a different store beat me to the punch but I thought I would post the pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In case you cannot tell it is a white screen with the original black back(I dont like the silver one) and a white battery cover.

I don't like the silver either, but that's too much black looks good tho
Sent from my SPH-D710 using Tapatalk

also here is the inverted option, code named Raider Nation ET4G:
Sorry the pictures are crappy they were taken with an Epic with no flash.

The black & white one is sick!!!! Time to start watching ebay for a parts phone I guess.
Sent from my Galaxy10.1 TouchWiz/ADWex equipped Starship.

Hehe so much for waiting 60 days from release to start harvesting
Just teasing...i actually did the same thing yesterday i rocked the all white for a while, but the two-tone is just too cool. I'm a ska-head too, so two-tone fits lol. Now if only i had a checkerboard battery cover....
Also, i asked my SRSS, and he confirmed that since it's a new SKU, the 60 day rule applies...and then proceeded to inform me that so long as we got the return box sealed on Sunday, auditors won't be able to see it on Monday lol.
Sent from my SPH-D710 using xda premium

Yeah I actually used my black screen on a customer's phone that had a non working lcd.

I want one.
Sent from my Nexus S 4G using xda premium

Panda is too cute.
How 'bout Samsung Galaxy Epic 4G Touch "Tux Edition"? Yes, No Maybe...

so the the white battery cover smooth or like the black one?

How would I go about replacing the screen?

wow those look great super ! i need to get my hand on some parts now

Subroto said:
How would I go about replacing the screen?
Click to expand...
Click to collapse
are you asking where to get a screen, or how to replace the screen?
As far as where, you'll have to do some searching around. Sprint techs like us have the luxury of harvesting screens off returned phones (normally used for repairs)...but epic screens are generally so far and few between i doubt you'd find a tech willing to sell one to you.
If you're asking how, that's easy. Unscrew the six screws underneath the battery cover. Then using a really thin piece of plastic or even your fingernails, begin to pry the area where the bezel meets the glass down both sides and the top (the bezel-back-frame almost fits like a cap on the screen). Then just lift the bezel-frame from the screen in an out then down motion (basically, the top separates first, then you'll have to go down and out to get the bottom part off; you don't want to pry the bottom part straight out so as not to damage the charging port). During this, you'll likely see your headset jack move with the frame, that's ok because it moves pretty freely inside.
Once inside, you'll see two flat Phillips head screws, unscrew those. You won't need to unscrew the third tiny one in the upper right hand corner. There are several cables (3 or 4) that are plugged into ports, just unplug them, nothing fancy. Just make sure you look closely so you don't miss one. Then, the motherboard (which is roughly shaped like an "L" ) just lifts up. Reverse directions to put in a new screen. Easy squeezy lemon Japanesey.
Sent from my SPH-D710 using xda premium

squshy 7 said:
) Easy squeezy lemon Japanesey.
Click to expand...
Click to collapse
Never heard it that way before LOL
I've always heard it "Easy peasy, lemon squeezy"

How much do I have to pay to get my phone to look like the one In The first post
Sent from my SPH-D710 using xda premium

EL TEJANO said:
Never heard it that way before LOL
I've always heard it "Easy peasy, lemon squeezy"
Click to expand...
Click to collapse
Lol, me as well, first time i heard it was on an episode of hey Arnold. Then i heard Japanesey, so now i just combine them lol
Sent from my SPH-D710 using xda premium

gtuansdiamm said:
How much do I have to pay to get my phone to look like the one In The first post
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
You'll have to wait until someone sells a screen on eBay, we (sprint) can't sell you one
Sent from my SPH-D710 using xda premium

Might be easier to just mask off the phone & paint it to your liking.

SamsungSammy said:
so the the white battery cover smooth or like the black one?
Click to expand...
Click to collapse
its smooth.
also, the tech at my store is planning on getting the white E4GT, removing the gray, and painting it (he hasnt decided on red or blue). depending on how that goes, i may be doing the same. a nice candy apple red with some metal flake in place of the gray would be gorgeous IMO. i think the gray looks like cheap, crappy plastic
EDIT: ill post back with pictures once he's done, and if i do mine

If painting your phone makes you wary or one lacks skills to attempt such a task I believe you can also purchase self adhesive colored skins as well.

EL TEJANO said:
If painting your phone makes you wary or one lacks skills to attempt such a task I believe you can also purchase self adhesive colored skins as well.
Click to expand...
Click to collapse
lol you know thats not the same thing. or we'd all just skin our cars.

Legit seller for battery covers

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.ebay.com/itm/26105416775...NX:IT&_trksid=p3984.m1497.l2649#ht_3041wt_905
I was looking for a battery cover to replace mine and ditch the carrier branding. I love the look of the Int. cover, how it was designed.
Anyway there are a lot of sellers for these things and they range in price from high to low. Just wanted to give a heads up in case anyone was looking for one. This guy shipped INCREDIBLY fast. Like 4-5 days fast, I wasn't expecting it for at least 2 weeks.

I'm looking for a white one. The pictures seem pretty haggard from the ones I found.
Thanks for posting. I may try it out. Quality and fitment good? It says original, true OEM?
Edit - I caved. You made me do it.

Perfect fit and finish. I compared it to my original and it looks identical, actually fits even snugger. My AT&T one had the slightest bit of movement, one of the tabs didn't lock as good as it should.
You will not be disappointed. I may actually order a white myself. I was honestly shocked by how fast this guy shipped it. It was like 4 days after I ordered from China.

No way these are genuine from china?
But cheap enough... don't have to worry about scratching :good:

i'm going to order one. Just in case, i only had my phone for a few days and seen fine scratchs on mine.

I compared and really see or feel no difference what so ever. I'm extremely picky with this stuff. Seller says they are original, they look and more importantly feel original and MOST importantly fit like the original. Every tab looks the same, paint and gloss finish looks identical.
So yeah...China or not these are legit. Even if they are a copy they are an EXACT copy. Not one aspect of these parts feels or looks fake. Am I making my point?
His feedback is further proof of his quality parts.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Araltd said:
No way these are genuine from china?
But cheap enough... don't have to worry about scratching :good:
Click to expand...
Click to collapse
Why wouldn't they be legit from China? The battery says "Cell made in Korea, Assembled in China" and the label beneath the battery says "Made in China"... Why wouldn't China have the spare OEM parts?

ferris2375 said:
Perfect fit and finish. I compared it to my original and it looks identical, actually fits even snugger. My AT&T one had the slightest bit of movement, one of the tabs didn't lock as good as it should.
You will not be disappointed. I may actually order a white myself. I was honestly shocked by how fast this guy shipped it. It was like 4 days after I ordered from China.
Click to expand...
Click to collapse
Is the inside of the cover padded similar to that of the OEM?

Yes. Same thickness
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Thanks for the heads up, I want to get rid of my AT&T branded cover too and I think the international version looks much better.

You all might think this is stupid but I'm thinking of putting a pebble back on my white sgs.
I saw a guy do it in a video review for the oem flip cover and I loved how the blue and white clashes. So this is so something I plan on doing. Minus the flip cover.

throwback1718 said:
You all might think this is stupid but I'm thinking of putting a pebble back on my white sgs.
I saw a guy do it in a video review for the oem flip cover and I loved how the blue and white clashes. So this is so something I plan on doing. Minus the flip cover.
Click to expand...
Click to collapse
I don't think that's stupid at all, the thought crossed my mind too but i'm gonna keep it stormtrooper'd out!

Thanks! Exactly what I've been looking for to remove that obnoxious Verizon branding!

Has anyone here tried the carbon back covers? Such as http://www.ebay.ca/itm/Carbon-Fiber...Accessories&hash=item3cc85e55ed#ht_500wt_1180
I'm debating whether to bite the bullet and try it for my incoming white S3, but just looking around for now.

SONE9 said:
Has anyone here tried the carbon back covers? Such as http://www.ebay.ca/itm/Carbon-Fiber...Accessories&hash=item3cc85e55ed#ht_500wt_1180
I'm debating whether to bite the bullet and try it for my incoming white S3, but just looking around for now.
Click to expand...
Click to collapse
Not that I know of, but damn that white one is sexy as ****! I might have to give that one a shot, even though the trim around it is a bit thick for my taste.

Gadgetz said:
Not that I know of, but damn that white one is sexy as ****! I might have to give that one a shot, even though the trim around it is a bit thick for my taste.
Click to expand...
Click to collapse
Yeah it definitely looks nice. I'm curious as to how the black back would look on the white s3 as well

SONE9 said:
Has anyone here tried the carbon back covers? Such as http://www.ebay.ca/itm/Carbon-Fiber...Accessories&hash=item3cc85e55ed#ht_500wt_1180
I'm debating whether to bite the bullet and try it for my incoming white S3, but just looking around for now.
Click to expand...
Click to collapse
I just ordered one off of amazon yesterday. When it arrives in a week or two I'll post pics. I ordered this one http://www.amazon.com/gp/product/B008BQVZ2M/ref=oh_details_o03_s00_i00
It's black carbon fiber with blue trim. I really like the pebble blue and am glad I got it. I also ordered a black tpu bumper http://www.amazon.com/gp/product/B008DNLD8E/ref=oh_details_o02_s00_i00 and the fosmon case too. I'll post pics of everything as i get them.

SONE9 said:
Has anyone here tried the carbon back covers? Such as http://www.ebay.ca/itm/Carbon-Fiber...Accessories&hash=item3cc85e55ed#ht_500wt_1180
I'm debating whether to bite the bullet and try it for my incoming white S3, but just looking around for now.
Click to expand...
Click to collapse
Nice covers. Thanks for the link. I just ordered

Just ordered one as ****ing TMobile didn't include one in the box when I bought it. Idiots. Thanks!

pieces of cake said:
Just ordered one as ****ing TMobile didn't include one in the box when I bought it. Idiots. Thanks!
Click to expand...
Click to collapse
The device didn't ship with a battery cover!?!?!
If that's the case you most certainly should not have to purchase one, in fact I'd be hesitant to even use the device; I'd say a return is in order...

SGS3 Carbon Fiber From XO Skins

Copy from Facebook:
The Full Body Samsung Galaxy S 3 is shipping as well as the Carbon Fiber in Black, Red, White and Blue! http://xoskins.com/carbon-fiber-skin-protectors/samsung-galaxy-s-iii-black-carbon-fiber-back
http://xoskins.com/cell-phone-skin-...ectors/samsung-galaxy-s-3-full-body-protector
I grabbed a black one, any tips for installing it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mahbitty said:
Copy from Facebook:
The Full Body Samsung Galaxy S 3 is shipping as well as the Carbon Fiber in Black, Red, White and Blue! http://xoskins.com/carbon-fiber-skin-protectors/samsung-galaxy-s-iii-black-carbon-fiber-back
http://xoskins.com/cell-phone-skin-...ectors/samsung-galaxy-s-3-full-body-protector
I grabbed a black one, any tips for installing it?
Click to expand...
Click to collapse
Same as any skin. Remove the back from the phone. Do a test fit first to see that it fits correctly. Then apply. The best way is to line up the holes on the back and then smooth out towards the sides to remove any bubbles

Don't worry about wrinkles. Get it lined up and slapped on. Then take a blow dryer and heat it up. That makes it easy to get on straight and remove creases. It also warms up the glue and makes it takier.

I've never understood the appeal of "skins". Personally I feel you'd be better off with a "slim" case, and under most circumstances it would probably be a cheaper route.
A friend had installed a Skinomi variant on his Droid X, and recently upgraded to a S3 as well. He decided to sell off his DX to a co-worker and had one hell of a time removing the skin, which ended up practically melting to the battery door and back casing of the device.

I have one on my nexus at the moment. Considering upgrading to the s3 as soon as I can play with one.

why buy a skin, when you can buy an entire backcover?
someone buy mine. i have a white GS3, but they sent me a black one. 10bucks paypal shipped USPS first class if you want it. PM ME!

ExTREmE99 said:
why buy a skin, when you can buy an entire backcover?
someone buy mine. i have a white GS3, but they sent me a black one. 10bucks paypal shipped USPS first class if you want it. PM ME!
Click to expand...
Click to collapse
Where you buy it from?

god that galaxy s III logo looks so bad

droalex said:
Where you buy it from?
Click to expand...
Click to collapse
ebay, but the seller is in HK. waited 2 weeks just to get it, and they sent me the wrong color
RedBlueGreen said:
god that galaxy s III logo looks so bad
Click to expand...
Click to collapse
actually, the logo is the SAME logo (except for the obvious fact that the galaxy font is smaller on the US version) as the one found on the US Snapdragon GS3 variants
yes, i have both the at&t i747, and the international i9300:

ExTREmE99 said:
ebay, but the seller is in HK. waited 2 weeks just to get it, and they sent me the wrong color
actually, the logo is the SAME logo (except for the obvious fact that the galaxy font is smaller on the US version) as the one found on the US Snapdragon GS3 variants
yes, i have both the at&t i747, and the international i9300:
Click to expand...
Click to collapse
Logo look the same but the III on the carbon is italic

Is that a case or a replacement back?

I guess it's a case? Oh well. Too bad you can't tag a user on here to get their attention

It's a replacement back - search on eBay if you're trying to find them without trying to bug a user..... they're all over, here's the one I bought and I love it!
http://r.ebay.com/m1c5vn
MUCH better than any cheap skin you're going to buy with all those awful n00b cutouts on the edges since they're assuming you don't have a heat gun to stretch it out.... by the way, I do vinyl graphics for a living, I know a thing or two about templates when compared to custom cut out vinyl and these even nicer back covers!

I have one of these and I love it. The only problem is the A and the L fell off.
Sent from my SCH-R530U using Tapatalk 2

Received one for review - Will be posting pics & video soon !
EDIT:
Here we go!
Added pictures + video

gr4ybu5h said:
I have one of these and I love it. The only problem is the A and the L fell off.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
You want to send me your "Y" then since all the hype I've given this thing has apparently caused it to fly off somewhere.... Haha, time to order another one and protect it with a small layer of glue!