Related
I have the One X from HK and am using it in India. I rooted and unlocked the device but am still on the stock rom and software version 1.26.708.2 - Which OTA update applies to me? I'm not able to force the update on the phone (keeps spinning when looking for update) - Do I have to un-root and re-lock in order to get this OTA update? Sorry if this is a repeat question...
xxplozive said:
I have the One X from HK and am using it in India. I rooted and unlocked the device but am still on the stock rom and software version 1.26.708.2 - Which OTA update applies to me? I'm not able to force the update on the phone (keeps spinning when looking for update) - Do I have to un-root and re-lock in order to get this OTA update? Sorry if this is a repeat question...
Click to expand...
Click to collapse
The newest one is 1.28.708.10. I live in Australia and I have the same phone as you (from HK) and I got the OTA update yesterday (1.28.708.10). I did re-locked my phone and ran the RUU 1.26.708.3 before I did the OTA update.
shadowboy23 said:
The newest one is 1.28.708.10. I live in Australia and I have the same phone as you (from HK) and I got the OTA update yesterday (1.28.708.10). I did re-locked my phone and ran the RUU 1.26.708.3 before I did the OTA update.
Click to expand...
Click to collapse
Is it because I'm in India that I haven't gotten the update yet? Is it carrier specific?
xxplozive said:
Is it because I'm in India that I haven't gotten the update yet? Is it carrier specific?
Click to expand...
Click to collapse
I don't think it's carrier specific. Because when I bought my 2nd One X (Optus handset) and I use a Telstra sim card I still got the Optus update for my handset. And I didn't have any sim card on the HK handset when I got the OTA update I only had the wifi turned on and downloaded the OTA update via wifi.
shadowboy23 said:
I don't think it's carrier specific. Because when I bought my 2nd One X (Optus handset) and I use a Telstra sim card I still got the Optus update for my handset. And I didn't have any sim card on the HK handset when I got the OTA update I only had the wifi turned on and downloaded the OTA update via wifi.
Click to expand...
Click to collapse
Thanks for your help, i'll just wait till i get a notification to update and then un-root /unlock at that time.
xxplozive said:
Thanks for your help, i'll just wait till i get a notification to update and then un-root /unlock at that time.
Click to expand...
Click to collapse
Just a reminder that you need to be on a "stock" ROM unrooted and have stock recovery and locked bootloader. Personally I would go back to full stock (bootloader locked, stock recovery and stock ROM) and then you can try to update. I'm not sure but being rooted even if you are using stock ROM might give you the problem of not seeing the OTA update, but saying that I am not 100% sure if being rooted can create that problem. It is better to be on all stock is just my opinion.
Still on 1.26
Hi guys, I still haven't updated my phone to 1.28 or 1.29. Running 1.26, still rooted and unlocked. Is the best option for me to re-lock bootloader and use the 1.29 RUU file to do a manual update? Having issues with battery so want to do this asap, thanks for any help.
Finally updated
I was able to finally update after re-locking, putting back stock recovery and using RUU to get to 1.29. Titanium backup is pretty awesome and came in handy to restore phone to almost original state, thanks for your help.
First of all, hello!
I'm not unfamiliar with this forum, as you'd expect, but I'm finally making an appearance as I've got a question that XDA (or the internet!) can't seem to answer.
A few months ago I decided to spice things up and put CyanogenMod 10 onto my device, and for that time it was sufficient. But now that JB 4.2.2 is out, I decided to give it a shot. Thereon, a few days ago I used a Nandroid backup posted on XDA to revert back to the stock ROM, after a lot of fooling around, the operation was successful. My phone now runs JB 4.1 stock.
Once booted into 4.1, I checked the Check for Updates setting, eager to see the disclaimer and patch note, but nothing appears.
I can't think what the problem is, the CID used in the Nandroid backup is the same as my phones CID (H3G_001 (ThreeUK)).
Any ideas as to the origin of the problem ? Or any solutions as to a fix ?
Thanks for reading,
Cheers,
Charles.
dselrahc said:
First of all, hello!
I'm not unfamiliar with this forum, as you'd expect, but I'm finally making an appearance as I've got a question that XDA (or the internet!) can't seem to answer.
A few months ago I decided to spice things up and put CyanogenMod 10 onto my device, and for that time it was sufficient. But now that JB 4.2.2 is out, I decided to give it a shot. Thereon, a few days ago I used a Nandroid backup posted on XDA to revert back to the stock ROM, after a lot of fooling around, the operation was successful. My phone now runs JB 4.1 stock.
Once booted into 4.1, I checked the Check for Updates setting, eager to see the disclaimer and patch note, but nothing appears.
I can't think what the problem is, the CID used in the Nandroid backup is the same as my phones CID (H3G_001 (ThreeUK)).
Any ideas as to the origin of the problem ? Or any solutions as to a fix ?
Thanks for reading,
Cheers,
Charles.
Click to expand...
Click to collapse
Need wait till Three UK release 4.2.2 before you can update OTA, But with your current 1.39 Hboot you shouldn't have any problems running 4.2.2 & Sense 5
That is not a problem of your device or CID or software... Your career just hasn't released the OTA yet. You may contact them and ask when they will release.
Gesendet von meinem HTC One X mit Tapatalk 4
If I flash the RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed and OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.18.401.1-3.14.401.31_R_release_308291,Can I reciver the OTA JB 4.2.2 update?
My HTC One X is S-Off,CID HTC-044
wigankev said:
Need wait till Three UK release 4.2.2 before you can update OTA, But with your current 1.39 Hboot you shouldn't have any problems running 4.2.2 & Sense 5
Click to expand...
Click to collapse
That's the thing - my phone is unlocked and my current carrier is Virgin mobile, and ThreeUK have released 4.2.2, not sure how this will affect me, as my carrier differs from my stock OS installation CID.
dselrahc said:
That's the thing - my phone is unlocked and my current carrier is Virgin mobile, and ThreeUK have released 4.2.2, not sure how this will affect me, as my carrier differs from my stock OS installation CID.
Click to expand...
Click to collapse
Three UK hasn't reported to have released it, Source?
wigankev said:
Three UK hasn't reported to have released it, Source?
Click to expand...
Click to collapse
I seem to remember seeing it posted on Three's Twitter, but it's not there any more - guess I was mistaken.
The fact that my CID is registered to Three and that my phone is unlocked and running with a Virgin mobile SIM card in it will mean that I will get the JB update when Three release it?
dselrahc said:
I seem to remember seeing it posted on Three's Twitter, but it's not there any more - guess I was mistaken.
The fact that my CID is registered to Three and that my phone is unlocked and running with a Virgin mobile SIM card in it will mean that I will get the JB update when Three release it?
Click to expand...
Click to collapse
Yeah you will receive 4.2.2 OTA when Three UK release it despite the sim card you use
wigankev said:
Yeah you will receive 4.2.2 OTA when Three UK release it despite the sim card you use
Click to expand...
Click to collapse
Ahhh okay, explains everything. Thanks for the help!
Has anyone updated to Lollipop strictly over wifi? Reason I ask is I am using a VZW Note 4 on AT&T and the update services of course will not connect to the VZW systems over HSPA and without bootloader unlock I can't use the Qualcomm tools to enable the ATT LTE radios. Currently trying to work through ways to update to Lollipop since I just get "Software update is temporarily unavailable."
Thoughts, Ideas?
Thanks.
From what I read, you need to connect it to a PC and use the Verizon upgrade assistant (Or KIES when it's available there).
bbeelzebub said:
From what I read, you need to connect it to a PC and use the Verizon upgrade assistant (Or KIES when it's available there).
Click to expand...
Click to collapse
Thanks. Tried Kies but not the Verizon Upgrade Assistant. I'll give it a try and report back in a few.
The Verizon upgrade assistant says my phone is up to date even though it's still 4.4.4. Good times.
Updates show up there later. Give it a couple days or else borrow a Verizon SIM. At some point it will show up.
bbeelzebub said:
Updates show up there later. Give it a couple days or else borrow a Verizon SIM. At some point it will show up.
Click to expand...
Click to collapse
Ah. Thanks for the info. :good:
Hi guys,
I got my HTC 10 last week - phone is a big improvement from the m8.
I am running Telstra's latest firmware - Have s-off already...
Telstra's latest firmware is 1.53.841.6 with Leedroid ROM - have been trying to get VOLTE.
I never got VOLTE with stock because I rooted so fast and S-OFF and installed custom ROMs.
So I had to install stock system image 1.53.841.6, reinstall stock recovery and factory reset and VOLTE icon shows up instantly. Install TWRP and VOLTE remains. But if you install a custom rom and do a full wipe seem to lose VOLTE. Also have to have the telstra firmware to VOLTE to work, I tried with WWE and no go. Also had to ring up telstra as it wasn't activated. So if you are having trouble getting it - might be best to double check. Even though my provisioned flag was on. *#*#4636#*#* to check - tap phone info.
@xlrate reported not wiping data and installing VIPER was able to keep VOLTE. (Updated the customize folder in the rom with my Telstra back up, also the build prop to do this) Also TELST001 cid has to be on.
Has anyone got VOLTE working on a custom ROM on WWE Firmware?
So Aussies... Who's got their new HTC 10?
Update - 15/10/16
Thanks to @brantp for providing TWRP backups & OTAs
https://drive.google.com/drive/folders/0B6MWrHVBWC-xZlBQN1BqYUNPRW8
TWRP Backup (untouched System Image + Boot)
- 1.21.841.8 (+ Recovery)
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
Stock Recovery
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
OTA
1.21.841.8 --> 1.53.841.6
1.53.841.6 --> 1.80.841.1
1.80.841.1 --> 1.95.841.3
Firmwares- Refer to http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520 for more info
https://docs.google.com/spreadsheets/d/1EdAHLDDxqf9jH65me_8bY9oXdaYusI0eedpwO6yUY2s/pubhtml
Thanks to @Sneakyghost
Roms- Leedroid, ICE and Viper now support Telstra with carrier support.
If anyone has any of the other australian carriers firmware please post and I will add them to OP.
15/08/16
https://www.androidfilehost.com/?w=files&flid=60869
Telstra RUU provided by @Sneakyghost - Will restore OTA's if anyone has broken them
12/03/18
Telstra OREO update
http://fotadl-az.htc.com/secure/OTA....48.841.31_release_519847tp9bagwfkglchg5u.zip
@Sneakyghost isn't doing the firmware updates anymore.
If you need to use the firmware.zip out of the OREO zip and need to a custom recovery either replace the recovery.img with twrp.img (rename it of course) in the firmware.zip - or flash one after installation.
I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?
Vampyric said:
I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?
Click to expand...
Click to collapse
I have had VoLTE working with Leedroid after I used the telstra 1.53 system/customize & parts of the build.prop on the 1.30 base... Haven't been able to get it working on 1.80 base.
Have had to use the telstra firmware for it work, doesn't work on WWE. So it is kinda a pain to get working.
VoLTE is better call quality and if you are on a call you can use LTE/4g to use the internet... Without VoLTE when on calls your phone 3g
EDIT - don't think OTA will work since you are rooted unless you went systemless root
I guess I don't 'appreciate' VoLTE as much as I should, because I rarely make phone calls..
Sadly, not Systemless root. So, I think I need to go back to stock, update and re-root. It's not something I've had to worry about before. So, it's kinda frustrating, and a little too complicated for me to totally understand.
I was going to de-brand it, and just run the WWE RUU.. But, maybe I'll wait for the 1.80 Telstra update and worry about it then.
I got rid of the notification
**Sent from a uranium powered typewriter**
Anyone experiencing an issue with NFC? While on stock 1.21.841.8 (and locked), worked without issue. Since updating to 1.53.841.6 (and unlocked), can't read my Opal card now ie no vibration, no sound, no anything. Haven't tested my tap & pay banking app yet (which did work without issue prior to updating).
Yes I also had and issue with NFC. Would not read opal card and was an absolute pain to try and read my Amex and Visa card.
Ended up getting another issue with it and returned the phone under warranty for NFC and the other issue.
Still waiting to get a phone back ?
Sent from my HTC One_M8 using Tapatalk
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.
xlrate said:
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.
Click to expand...
Click to collapse
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it
yldlj said:
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it
Click to expand...
Click to collapse
Tried reflashing the 1.53 firmware again (twice) to see if it fixes it, but it's still not working ie Can switch it on and off, but it does not respond to my opal card.
It's only taken Telstra until this month to push out 1.53, so who knows when (or if) 1.80 will happen. Now I'm trying to decide whether it's worth sending back for another handset or waiting to see if the next OTA will fix it. My biggest concern is that the replacement could be on 1.21 and I could possibly end up with the same issue all over again!
pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
I just tried to NFC on 1.53 and it isn't working very well, hardly at all. I got it to work 3 times in about 15 mins...
Previously I think when I was on 1.30 firmware it was working well before but just had to hold it near the head phone jack.
Any Telstra users want to test out the Telstra firmwares
http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520
Make sure you back-up the rom & back up internal storage refer to later posts in that thread.
https://crowdsupport.telstra.com.au/t5/Device-Updates/Software-Updates-01-07-2016/td-p/585953 Telstra 1.80.841.8 firmware is coming 25-Jul
Leedroid is the best rom for Telstra users. Running it myself and working perfectly, now supports Telstra with carrier support & VoLTE working - thanks @LeeDroid
*Only works on Telstra firmware.
Install Ice yesterday (only got my phone Friday ), really like it over the stock rom.
Some people complained about the LED but I like it. My only complaint about my M8 was how bright the LED was specially in the dark when you're trying to get to sleep.
Another problem I'm having is file transfers freeze when using a USB 2 port on Windows 10.
I like my new M10 but not sure if I like it over the M8 as of yet. I preferred the speaker arrangement on the M8 and having the home, back buttons etc on the screen rather then down the bottom.
I have to admit I'm not a fan of the "Samsung" look at all which is why I bought HTC in the past to begin with. I didn't want to be a part of the flock.
Hey guys,
I'm looking to get the 10 but imported, could someone (especially looking for someone with Optus) check their box to see what specific model it is (e.g. 10h or 10u)?
Thanks guys
The Telstra model is a HTC 10h
ICE (InsertCoin) v2.0.6 supports Telstra also now too. Thanks @baadnewz
morgy59 said:
The Telstra model is a HTC 10h
Click to expand...
Click to collapse
Awesome, thanks morgy59
Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?
brantp said:
Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?
Click to expand...
Click to collapse
I found it worked perfectly fine on wwe 1.30 firmware using Leedroid. Now I'm on 1.53, hardly works at all
Sent from my SM-P605 using Tapatalk
It's doesn't read card on 1.53 on Optus build 710
I am a bit confused by all the posts about this subject
I would like to unlock my phone, for future rooting, when everything is more stable, meanwhile I want to get OTA updates on the phone "automaticaly", is that possible
You can definitely unlock the bootloader and still receive OTA.
And for your first point, rooting is plenty stable already, so no need to wait for that. Though if you aren't well versed in fastboot or root upgrade processes, you should definitely read all the most recent guides on it to make your transition smoother.
Thank you :good:
I did my share of rooting with Samsung S1, S3 and S5
Then bougth an LG V10, had to buy a "IMAGE" from a Chinese guy, using Alibaba "paypal" in chinese, to be able to activate LTE 20
Have been quiet for a couple of years, and didnt really have the need to root to have the V10 doing what I wanted, but want to be able to root if I have too much free time
melorib said:
Thank you :good:
I did my share of rooting with Samsung S1, S3 and S5
Then bougth an LG V10, had to buy a "IMAGE" from a Chinese guy, using Alibaba "paypal" in chinese, to be able to activate LTE 20
Have been quiet for a couple of years, and didnt really have the need to root to have the V10 doing what I wanted, but want to be able to root if I have too much free time
Click to expand...
Click to collapse
You will probably find this less confusing than Odin. But you need to read up on using latest SDK, adb, fastboot, etc.
We're now using Magisk to root and be able to use Paypal.
wtherrell said:
You will probably find this less confusing than Odin. But you need to read up on using latest SDK, adb, fastboot, etc.
We're now using Magisk to root and be able to use Paypal.
Click to expand...
Click to collapse
Thanks, I work with IT, and already used adb to enable LTE frequencies on my LG V10. And of course I have been reading about Magisk, but will wait for more stable versions
melorib said:
Thanks, I work with IT, and already used adb to enable LTE frequencies on my LG V10. And of course I have been reading about Magisk, but will wait for more stable versions
Click to expand...
Click to collapse
There's issues with Magisk and some other phones, but topjohnwu has a Pixel 2 I believe, so he tests on that.
Magisk for our phones is perfectly stable, the only issue is people don't like the dtbo image being edited to remove AVB 2.0/dm-verity.
My bootloader is unlocked on my XL 2 and I am on Verizon. I have yet to get the January OTA. I haven't gotten an OTA since I got the phone in October
canemaxx said:
My bootloader is unlocked on my XL 2 and I am on Verizon. I have yet to get the January OTA. I haven't gotten an OTA since I got the phone in October
Click to expand...
Click to collapse
Strange, there was at least an update in January
Nov, Dec and January .....I have had to flash the full image if all 3. No OTA has ever come to this device
canemaxx said:
Nov, Dec and January .....I have had to flash the full image if all 3. No OTA has ever come to this device
Click to expand...
Click to collapse
Why? I want OTA updates...
I'm not sure why they just have not come to my phone.
canemaxx said:
I'm not sure why they just have not come to my phone.
Click to expand...
Click to collapse
You only unlocked the bootloader? Maybe because it is Verizon, the bootloader is supposed to to be locked!
I can't see that being the reason as I bought the phone from the Google store
canemaxx said:
I can't see that being the reason as I bought the phone from the Google store
Click to expand...
Click to collapse
Sounds strange, maybe you updated before OTA was available for Verizon...
In 2 weeks I get mine, going to unlock before any update, it was bought December, so it has at least one update missing...
canemaxx said:
I can't see that being the reason as I bought the phone from the Google store
Click to expand...
Click to collapse
You can buy the locked Verizon phone from the Google Store, but apparently you ordered the correct one (unlocked, carrier free). Devices on the Verizon network (both locked and unlocked) receive regular OTAs, so don't worry- the status of the bootloader has nothing to do with why your device hasn't received the update yet. The difference is having the unlocked variant, you don't have to use Verizon specific images, and you can change carriers at any time, including internationally. Usually with just a SIM card change.
The OTA updates are staged randomly and roll out over a couple of weeks. Your OTA will eventually come by itself. Sometimes people wait a month (or even longer). If you don't want to wait, then just download the OTA and sideload it. Every month, the new OTAs (and full images) are posted by Google. You are free to download and flash them. Instructions on how to do this are provided by Google at the top of the download page. You don't even need to be bootloader unlocked to sideload OTAs.
v12xke said:
You can buy the locked Verizon phone from the Google Store, but apparently you ordered the correct one (unlocked, carrier free). Devices on the Verizon network (both locked and unlocked) receive regular OTAs, so don't worry- the status of the bootloader has nothing to do with why your device hasn't received the update yet. The difference is having the unlocked variant, you don't have to use Verizon specific images, and you can change carriers at any time, including internationally. Usually with just a SIM card change.
The OTA updates are staged randomly and roll out over a couple of weeks. Your OTA will eventually come by itself. Sometimes people wait a month (or even longer). If you don't want to wait, then just download the OTA and sideload it. Every month, the new OTAs (and full images) are posted by Google. You are free to download and flash them. Instructions on how to do this are provided by Google at the top of the download page. You don't even need to be bootloader unlocked to sideload OTAs.
Click to expand...
Click to collapse
Thanks I know how to sideload or flash the full image but just was hoping I wouldn't have to again and again
Are your phones enrolled on the Android Beta Program ? My P2 was and I never got the Jan. Update till I Unenrolled from the beta program. Immediately afterwards I checked and Jan update was available.