Develop Bugs

[Q] getting on the wee ota boat

Planning on grabbing an unlocked but carrier branded one x in the next week or so. Is getting on the wwe ota release as simple as flashing a wwe ruu or is it tracked by imei ? I should know having a desire but sense is terrible on this and its been running aosp roms since it was a week old
Will be jumping on custom roms eventually but it sounds like we will all be stock for the next little while with the HTC dev bootloader issue.
M.

Anyone able to comment at all?
IE - carrier branded rom now, if I flash worldwide stock image will i get worldwide ota updates?
I'm planning on buying today but would just like to know this first
Thanks!

mattman83 said:
Anyone able to comment at all?
IE - carrier branded rom now, if I flash worldwide stock image will i get worldwide ota updates?
I'm planning on buying today but would just like to know this first
Thanks!
Click to expand...
Click to collapse
no, i believe your OTA updates are taken from your CID

bagofcrap24 said:
no, i believe your OTA updates are taken from your CID
Click to expand...
Click to collapse
Ok fair call, will just have to flash manually then... not a major deal. Good to know though, thankyou. I saw recoveries have started popping up in the last 12 hours, this wasn't the case when i posted... so much happier now anyway
M.

Which Phone do I have? IMM76K: no 4.1.1 updates working)

Hi all,
I just received a new GNex from Vodafone Australia. Can someone please help me figure out which version I have so I can update it?
I am running 4.0.4 (rooted)
The Baseband is:
I9250TDVLE1
The build is:
IMM76K.I9250TDVLE1
I could not find an update on google anywhere...
I found reference to my build pertaining to Toro, Magro and Verizon.
I can't see how all of these could be simultaneously true...
I thought '**** it' I ll roll back to a yakju 'official' 4.0.4 IMM76I ROM from here and then flash the Update to 4.1.1 JRO03C
But When I booted into CWM and tried to flash the imm76i, it would not let me. Is there something I am doing wrong or do not understand about swapping roms...?
(I cleared the cache / factory reset)
Am I stuck with IMM76I until google makes an 4.1.1 update, or can I flash another google rom somehow and get the update that way?
Cheers

ac17 said:
Hi all,
I just received a new GNex from Vodafone Australia. Can someone please help me figure out which version I have so I can update it?
I am running 4.0.4 (rooted)
The Baseband is:
I9250TDVLE1
The build is:
IMM76K.I9250TDVLE1
I could not find an update on google anywhere...
I found reference to my build pertaining to Toro, Magro and Verizon.
I can't see how all of these could be simultaneously true...
I thought '**** it' I ll roll back to a yakju 'official' 4.0.4 IMM76I ROM from here and then flash the Update to 4.1.1 JRO03C
But When I booted into CWM and tried to flash the imm76i, it would not let me. Is there something I am doing wrong or do not understand about swapping roms...?
(I cleared the cache / factory reset)
Am I stuck with IMM76I until google makes an 4.1.1 update, or can I flash another google rom somehow and get the update that way?
Cheers
Click to expand...
Click to collapse
That's because the package you downloaded on Google's Developers website needs to be flashed using fastboot, not CWM. Follow this thread to flash back to yakju, and you should be good to go.

Did this work for you? as i have the same phone and im tempted to do this but not if its going to mess the phone up. Damn you vodafone for having to be different

Rayzor76 said:
Did this work for you? as i have the same phone and im tempted to do this but not if its going to mess the phone up. Damn you vodafone for having to be different
Click to expand...
Click to collapse
It would definitely work however if you even need to return your phone back to Vodafone, you may or may not run into some issues due to not being on their ROM. It's pretty hard to find random stock ROMs for places other than the main ones these days (or I just might be looking at the wrong places).

Rayzor76 said:
Did this work for you? as i have the same phone and im tempted to do this but not if its going to mess the phone up. Damn you vodafone for having to be different
Click to expand...
Click to collapse
I'm sorry, I can't remember what I did, but I fixed it that night, which now feels like months ago.
I installed Nexus Root Toolkit v1.5.2, on a pc and I know that that helped me speed up the process.
You can't ruin anything unless you flash a rom not designed for the phone, or format the bios partition and then reboot (with out installing a new bios), but even then I'm sure you can install stuff from a pc over usb using that program.

ac17 said:
I'm sorry, I can't remember what I did, but I fixed it that night, which now feels like months ago.
I installed Nexus Root Toolkit v1.5.2, on a pc and I know that that helped me speed up the process.
You can't ruin anything unless you flash a rom not designed for the phone, or format the bios partition and then reboot (with out installing a new bios), but even then I'm sure you can install stuff from a pc over usb using that program.
Click to expand...
Click to collapse
Thanks New to Android as I have been an avid iOS user and jailbreaker for a few years so just catching up on rooting and flashing ROMs n stuff. But good to know it can be done as i Have the exactly same phone from Vodafone Australia. Better to be safe than sorry and ruining a 2 day old phone.

Rayzor76 said:
Thanks New to Android as I have been an avid iOS user and jailbreaker for a few years so just catching up on rooting and flashing ROMs n stuff. But good to know it can be done as i Have the exactly same phone from Vodafone Australia. Better to be safe than sorry and ruining a 2 day old phone.
Click to expand...
Click to collapse
No worries mate, this is my 2nd android phone (first was a nexus s).
I learned a lot by rooting and playing with custom roms on that ph, but I have been really happy with stock jelly Bean on this (albeit rooted) device. Battery life is great, and it's a snappy phone with great features.
FYI I just read an interesting article Why Apple Won't Divorce Samsung today that explained how Samsung make all the chips for Apple products. You can't go wrong with Samsung mate.
Android users on this forum are generally friendly and Damn knowledgeable too.
Enjoy your new phone!

ac17 said:
Hi all,
I just received a new GNex from Vodafone Australia. Can someone please help me figure out which version I have so I can update it?
I am running 4.0.4 (rooted)
The Baseband is:
I9250TDVLE1
The build is:
IMM76K.I9250TDVLE1
I could not find an update on google anywhere...
I found reference to my build pertaining to Toro, Magro and Verizon.
I can't see how all of these could be simultaneously true...
I thought '**** it' I ll roll back to a yakju 'official' 4.0.4 IMM76I ROM from here and then flash the Update to 4.1.1 JRO03C
But When I booted into CWM and tried to flash the imm76i, it would not let me. Is there something I am doing wrong or do not understand about swapping roms...?
(I cleared the cache / factory reset)
Am I stuck with IMM76I until google makes an 4.1.1 update, or can I flash another google rom somehow and get the update that way?
Cheers
Click to expand...
Click to collapse
OK. The fact is that Vodafone and Telstra get all their updates later. This is because of the better 3g signals they have built in the phone. So due to this their updates come out a little while later. Also it depends where you are in the world (eg. UK, AU, USA) because the UK has already got the update as far as I know. So there is two options here to stay with Vodafone if something does go wrong so you have a backup. And referring to what Unlawful had said he is right you do need a stock Vodafone ROM or features and such can go wrong. BTW I am also with Vodafone but running a custom ROM.

Thank mate. I updated it manually, months ago.
The Gnex is an awesome phone (I upgraded from a NEXUS S), and with stock jelly Bean (rooted) with stock kernel it runs smoothly and is stable.
I miss rge Wolfson audio chip of the nexus s though bc audio recordings are terrible and crackling with the gnex.
Fast charge is something that I now need and otherwise I'm satisfied!

Discussion about Stock 4.2.2 for S3 i747

I just wanted to start a conversation about what people are hearing about when a Stock Rom 4.2.2 for the i747 might be released to the public or even leaked out would be nice.
Rumors and/or conjecture is welcome...

there is plenty of articles out there.. here is one:
http://www.phonedog.com/2013/05/20/...e-leaks-packs-in-several-galaxy-s-4-features/
also the one from sammoble
http://www.sammobile.com/2013/05/20...ly-bean-leaked-firmware-for-the-galaxy-s-iii/
we shall see

michelbites said:
I just wanted to start a conversation about what people are hearing about when a Stock Rom 4.2.2 for the i747 might be released to the public or even leaked out would be nice.
Rumors and/or conjecture is welcome...
Click to expand...
Click to collapse
Both articles are 9300 based not i747 but likely to get the same features when it comes.....

Gage_Hero said:
Both articles are 9300 based not i747 but likely to get the same features when it comes.....
Click to expand...
Click to collapse
Yeah I knew they were 9300 guessed I should have mentioned that. And yeah they should have the same features. I'm sure AT&T will take their sweet time releasing theirs but I guess Thank God for the devs maybe it won't be as long.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

4.2 Officially Out For Rogers S3's
Just got a text message from my carrier (Rogers) that Jelly Bean 4.2 is offically out for my S3 and I can update OTA from them. See the attached photo for proof.
I'm currently running a custom ROM and have no intention of updating. Just wanted to spread the word that it's out at least on my carrier and likely the other Canadian 'M' variants of the i747.

Haha no freaking way man . have you checked for the actual update and read the details ? I pray its actually the 4.2 update . anyone else have any info?
Sent from my SGH-I747 using xda premium

flexfulton said:
Just got a text message from my carrier (Rogers) that Jelly Bean 4.2 is offically out for my S3 and I can update OTA from them. See the attached photo for proof.
I'm currently running a custom ROM and have no intention of updating. Just wanted to spread the word that it's out at least on my carrier and likely the other Canadian 'M' variants of the i747.
Click to expand...
Click to collapse
Sounds promising, I am on Telus so I will check Kies tonight....

Gage_Hero said:
Sounds promising, I am on Telus so I will check Kies tonight....
Click to expand...
Click to collapse
An official text message from my carrier about the 4.2 update is more than promising. It's sounds pretty official to me. I don't know if it's 4.2.1 or 4.2.2 until someone actually does the update. For me to revert back to stock to get the update isn't possible right now. I just don't have the time. I will at some point in the future do the update though to take advantage of the updated bootloader and other under the hood firmware.
I'm running CM10.1 right now which requires bootloader LK4 so an update for me would break my ability to flash the latest nightlies. Until the assertion gets updated, I'm going to hold off.

I'm on Rogers in Canada
I was doing some maintenance on my SD card, backing up the contents to my local PC and then formatting it in Android, in prep to do a few other unrelated things, when I came across this thread. I saw the user's post above about Rogers texting about the 4.2.x update so I quickly ran off and tried to update via "Software Update". I received the "device is modified, FU jerkface!" prompt, so I rebooted into recovery, wiped, and planned to restore my TWRP stock/unrooted ROM. However I forgot that I had not restored the contents of my SD card back to the device before doing the factory reset in TWRP, so now I'm stuck with a GS3, no OS, no SD card and no way of fixing it until I redownload everything manually..
So, now I'm downloading the official 613MB file and have Odin ready and waiting, and the phone in download mode. I'll restore the 4.1.1, and then check software update before rooting (so it doesn't ***** about being 'modified') and confirm back here which version it is, and if it's a network wide update or something else.. stand-by!

Sorry about your SD card.. But it was for a good cause ! Haha thanks man excited to hear the results
Sent from my SGH-I747 using xda premium

flexfulton said:
Just got a text message from my carrier (Rogers) that Jelly Bean 4.2 is offically out for my S3 and I can update OTA from them. See the attached photo for proof.
I'm currently running a custom ROM and have no intention of updating. Just wanted to spread the word that it's out at least on my carrier and likely the other Canadian 'M' variants of the i747.
Click to expand...
Click to collapse
I have a Galaxy S3 with Rogers as well but did not get a text message. I'm not rooted and on stock Android 4.1.1. which I did via the Rogers OTA update a while ago. Just tried checking for the 4.2 OTA update but got a message that says "The latest updates have already been installed".

Makoers said:
Sorry about your SD card.. But it was for a good cause ! Haha thanks man excited to hear the results
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I'm just glad I backed it up first
EDIT:
As of 4:07PM EST in Toronto, Ontario Canada, The software update tool in settings says that 4.1.1 is the latest release for my phone.

I got a message saying a 4.2 update was available for me but my wife never got one

Seems like it's being rolled out in phases.. wonder what the criterion is?

radeonddr said:
I got a message saying a 4.2 update was available for me but my wife never got one
Click to expand...
Click to collapse
Di you try doing the update? If so, did it work?

Im on a custom rom right now, I might return to stock and give it ago just to see?
Ill keep you informed
r2traps said:
Di you try doing the update? If so, did it work?
Click to expand...
Click to collapse

Great news cant wait till we hear back from someone who as updated.

nil knoiden
radeonddr said:
Im on a custom rom right now, I might return to stock and give it ago just to see?
Ill keep you informed
Click to expand...
Click to collapse
That would be great, thanks! I was about to root and install a custom rom, but if I can get 4.2 OTA then I'll just wait it out. Surprised that's it's being rolled out to S3 owners so quickly. Felt like I had to wait forever for 4.1.1.

odin to stock right now , let you know when im done

Kies reports my phone has the latest firmware as well.. 4.1.1

Update today is part of 4.3 VZW update.

HTC/USA TWEETED today that today's update is the first part of the 2 part 4.3 VZW update. Today was a compatibility update for the 4.3 update.
Sent from my Galaxy Tab 10.1

jbh00jh said:
HTC/USA TWEETED today that today's update is the first part of the 2 part 4.3 VZW update. Today was a compatibility update for the 4.3 update.
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
The only way that makes sense is if it updates recovery. I'm not really sure why anyone would still be on the stock rom anyway ...
Sent from my HTC6500LVW using xda app-developers app

123421342 said:
The only way that makes sense is if it updates recovery. I'm not really sure why anyone would still be on the stock rom anyway ...
Sent from my HTC6500LVW using xda app-developers app
Click to expand...
Click to collapse
Just telling what is on Twitter, was posted 20 hours ago. And 90% of vzw customers are stock.
Sent from my Galaxy Tab 10.1

Updated info from HTC
Here is further info from HTC regarding updates to the Verizon HTC One (about halfway down the page). 4.3 update in December, and 4.4 late January.
Quote: HTC USA also addressed the question of Android 4.3 and 4.4 updates for the Verizon HTC One, which yesterday received a small update to its existing 4.2-based firmware. HTC describes this as a "compatibility update," to be followed by a 4.3 OTA in December. The delay to the Android 4.3 rollout on Verizon won't affect the planned 4.4 launch on the carrier in late January, HTC's message added.
Link to article: http://www.androidcentral.com/htc-reveals-more-kitkat-update-details
I'll believe it when I see it.

123421342 said:
The only way that makes sense is if it updates recovery. I'm not really sure why anyone would still be on the stock rom anyway ...
Sent from my HTC6500LVW using xda app-developers app
Click to expand...
Click to collapse
It did and often does.
It updated recovery and hboot, which would be very possible to have to change to allow the 4.3 OTA to actually flash properly when it's put out.

So if we didn't do the OTA we will have to do an OTA.zip to do the 4.3?
Sent from my Galaxy Tab 10.1

I'd just wait for the devs to do their thing. The last thing that I want is to have s-on and my buttloader locked again.
---------- Post added at 02:58 PM ---------- Previous post was at 02:58 PM ----------
And by buttloader I mean boot loader....

jbh00jh said:
So if we didn't do the OTA we will have to do an OTA.zip to do the 4.3?
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
Ok, so I took the .15 ota as is and still was s-off and unlocked. All I had to do was flash supersu and done.
Just cleaned up the bloat and made my edits for remove location icon n WiFi nag.. no negative effects.
Sent from my HTC6500LVW using xda app-developers app

jbh00jh said:
HTC/USA TWEETED today that today's update is the first part of the 2 part 4.3 VZW update. Today was a compatibility update for the 4.3 update.
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
Santod made the joke that the update was to help us get better updates. Turns out it wasn't a joke :laugh:

Taking the OTAs
Guys, I am at a loss here...I got the Verizon HTC ONE, used rumrunner to achieve S-OFF, Unlock, and Root, then flashed CWM 6.0.4.4 (I do have installed aps that require root if that matters) That's it. No de-bloat, no custom ROM, nothing. When I re-flash the original stock recovery back and try to check for and take the OTAs from the front end, I get "no new software update available". I'm still on 1.10.605.2 and original firmware. Would like to take this thing up to latest, be S-OFF, Unlocked, Rooted still but still off the shelf or stock for a bit more until I have shaken this thing down more.
I like the look of Santod's ROMs, probably will end up there, but not yet . His stock updated ROMs appear to have too much blue baked in for me - I like it off the shelf right now.
Thanks in advance if anyone can help guide me.

eharvey said:
Guys, I am at a loss here...I got the Verizon HTC ONE, used rumrunner to achieve S-OFF, Unlock, and Root, then flashed CWM 6.0.4.4 (I do have installed aps that require root if that matters) That's it. No de-bloat, no custom ROM, nothing. When I re-flash the original stock recovery back and try to check for and take the OTAs from the front end, I get "no new software update available". I'm still on 1.10.605.2 and original firmware. Would like to take this thing up to latest, be S-OFF, Unlocked, Rooted still but still off the shelf or stock for a bit more until I have shaken this thing down more.
I like the look of Santod's ROMs, probably will end up there, but not yet . His stock updated ROMs appear to have too much blue baked in for me - I like it off the shelf right now.
Thanks in advance if anyone can help guide me.
Click to expand...
Click to collapse
Have you frozen anything at all in Titanium Backup? If I remember correctly you have to relock your bootloader to be able to OTA (I may be mistaken though). If I were you I'd just wait until someone posts an OTApkg.zip (I think there's one available already) and just flash that instead.

eharvey said:
Guys, I am at a loss here...I got the Verizon HTC ONE, used rumrunner to achieve S-OFF, Unlock, and Root, then flashed CWM 6.0.4.4 (I do have installed aps that require root if that matters) That's it. No de-bloat, no custom ROM, nothing. When I re-flash the original stock recovery back and try to check for and take the OTAs from the front end, I get "no new software update available". I'm still on 1.10.605.2 and original firmware. Would like to take this thing up to latest, be S-OFF, Unlocked, Rooted still but still off the shelf or stock for a bit more until I have shaken this thing down more.
I like the look of Santod's ROMs, probably will end up there, but not yet . His stock updated ROMs appear to have too much blue baked in for me - I like it off the shelf right now.
Thanks in advance if anyone can help guide me.
Click to expand...
Click to collapse
No OTA will download onto the .02 software.
That was a version that shouldn't really have been distributed as far as I can see.
It will never see or allow for an OTA, so you will need to update to a stock .08 or stock .10 rom to be able to get the .15 OTA.
By the way, my stock roms are 100% stock, I did not change the colors of a single thing in my stock roms.
They are there for the 100% stock experience and for restore purposes. The .15 will be posted today as well.
NuSenseONE Max has blue elements added, but none of my stock roms do.

santod040 said:
No OTA will download onto the .02 software.
That was a version that shouldn't really have been distributed as far as I can see.
It will never see or allow for an OTA, so you will need to update to a stock .08 or stock .10 rom to be able to get the .15 OTA.
By the way, my stock roms are 100% stock, I did not change the colors of a single thing in my stock roms.
They are there for the 100% stock experience and for restore purposes. The .15 will be posted today as well.
NuSenseONE Max has blue elements added, but none of my stock roms do.
Click to expand...
Click to collapse
While this is not the correct thread to ask, why would .2 not accept OTA's on top of it?

refreblast said:
While this is not the correct thread to ask, why would .2 not accept OTA's on top of it?
Click to expand...
Click to collapse
As stated, I don't think the .2 software was supposed to be distributed.
As you can see from the story above, it does not pull the OTA's.
I have seen this now on the last couple OTA's where folks on .2 were not able to see any updates.
One user took his to Verizon to have it replaced/updated there.
Most of them appeared to have had .2 at one point and then were updated/reflashed to the .8 and the box relabeled before being sold.
Most of the boxes still had the .2 sticker under the new .8 one.
Point is, it wasn't supposed to be distributed as far as I can tell and since it's not truly a Release version, it won't update.
You would have to ask Verizon/HTC for any further clarification then that.

santod040 said:
As stated, I don't think the .2 software was supposed to be distributed.
As you can see from the story above, it does not pull the OTA's.
I have seen this now on the last couple OTA's where folks on .2 were not able to see any updates.
One user took his to Verizon to have it replaced/updated there.
Most of them appeared to have had .2 at one point and then were updated/reflashed to the .8 and the box relabeled before being sold.
Most of the boxes still had the .2 sticker under the new .8 one.
Point is, it wasn't supposed to be distributed as far as I can tell and since it's not truly a Release version, it won't update.
You would have to ask Verizon/HTC for any further clarification then that.
Click to expand...
Click to collapse
Lol @santod040 is a freaking HTC One Oracle. I never even knew .2 was thing before he asked that let alone knowing it was jank and wouldn't accept OTAs. How did he get .2? I got the phone like 4 days after Verizon launched it and it had .8.
EDIT: Nvm. I'm derp and didn't read all of santod's response before posting lol

BreakingVZW said:
Lol @santod040 is a freaking HTC One Oracle.
Click to expand...
Click to collapse
And a HTC Thunderbolt Oracle.
Cheers!

AMEN!!
TheBeardedMann said:
And a HTC Thunderbolt Oracle.
Cheers!
Click to expand...
Click to collapse

Forget Verizon ... Just root and run 4.3/5.5 .. first it was a month delayed which would have been November now it's December ... They just released the max . They will focus on that now and the one will be just like the
DNA or incredible 4g on Verizon
Sent From My Dark EclipticONE

We now have a second week of December time frame for the 4.3 update, so I assume we'll see it around the second week of January, just in time to be told that KitKat is being pushed back to the day after never.

IceDragon59 said:
We now have a second week of December time frame for the 4.3 update, so I assume we'll see it around the second week of January, just in time to be told that KitKat is being pushed back to the day after never.
Click to expand...
Click to collapse
This makes sense because 1 month after the 3rd week of October is the 2nd week of December, right? Verizon?
Sent from my HTC6500LVW using XDA Premium 4 mobile app

[Australia] HTC 10 Australian

Hi guys,
I got my HTC 10 last week - phone is a big improvement from the m8.
I am running Telstra's latest firmware - Have s-off already...
Telstra's latest firmware is 1.53.841.6 with Leedroid ROM - have been trying to get VOLTE.
I never got VOLTE with stock because I rooted so fast and S-OFF and installed custom ROMs.
So I had to install stock system image 1.53.841.6, reinstall stock recovery and factory reset and VOLTE icon shows up instantly. Install TWRP and VOLTE remains. But if you install a custom rom and do a full wipe seem to lose VOLTE. Also have to have the telstra firmware to VOLTE to work, I tried with WWE and no go. Also had to ring up telstra as it wasn't activated. So if you are having trouble getting it - might be best to double check. Even though my provisioned flag was on. *#*#4636#*#* to check - tap phone info.
@xlrate reported not wiping data and installing VIPER was able to keep VOLTE. (Updated the customize folder in the rom with my Telstra back up, also the build prop to do this) Also TELST001 cid has to be on.
Has anyone got VOLTE working on a custom ROM on WWE Firmware?
So Aussies... Who's got their new HTC 10?
Update - 15/10/16
Thanks to @brantp for providing TWRP backups & OTAs
https://drive.google.com/drive/folders/0B6MWrHVBWC-xZlBQN1BqYUNPRW8
TWRP Backup (untouched System Image + Boot)
- 1.21.841.8 (+ Recovery)
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
Stock Recovery
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
OTA
1.21.841.8 --> 1.53.841.6
1.53.841.6 --> 1.80.841.1
1.80.841.1 --> 1.95.841.3
Firmwares- Refer to http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520 for more info
https://docs.google.com/spreadsheets/d/1EdAHLDDxqf9jH65me_8bY9oXdaYusI0eedpwO6yUY2s/pubhtml
Thanks to @Sneakyghost
Roms- Leedroid, ICE and Viper now support Telstra with carrier support.
If anyone has any of the other australian carriers firmware please post and I will add them to OP.
15/08/16
https://www.androidfilehost.com/?w=files&flid=60869
Telstra RUU provided by @Sneakyghost - Will restore OTA's if anyone has broken them
12/03/18
Telstra OREO update
http://fotadl-az.htc.com/secure/OTA....48.841.31_release_519847tp9bagwfkglchg5u.zip
@Sneakyghost isn't doing the firmware updates anymore.
If you need to use the firmware.zip out of the OREO zip and need to a custom recovery either replace the recovery.img with twrp.img (rename it of course) in the firmware.zip - or flash one after installation.

I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?

Vampyric said:
I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?
Click to expand...
Click to collapse
I have had VoLTE working with Leedroid after I used the telstra 1.53 system/customize & parts of the build.prop on the 1.30 base... Haven't been able to get it working on 1.80 base.
Have had to use the telstra firmware for it work, doesn't work on WWE. So it is kinda a pain to get working.
VoLTE is better call quality and if you are on a call you can use LTE/4g to use the internet... Without VoLTE when on calls your phone 3g
EDIT - don't think OTA will work since you are rooted unless you went systemless root

I guess I don't 'appreciate' VoLTE as much as I should, because I rarely make phone calls..
Sadly, not Systemless root. So, I think I need to go back to stock, update and re-root. It's not something I've had to worry about before. So, it's kinda frustrating, and a little too complicated for me to totally understand.
I was going to de-brand it, and just run the WWE RUU.. But, maybe I'll wait for the 1.80 Telstra update and worry about it then.
I got rid of the notification
**Sent from a uranium powered typewriter**

Anyone experiencing an issue with NFC? While on stock 1.21.841.8 (and locked), worked without issue. Since updating to 1.53.841.6 (and unlocked), can't read my Opal card now ie no vibration, no sound, no anything. Haven't tested my tap & pay banking app yet (which did work without issue prior to updating).

Yes I also had and issue with NFC. Would not read opal card and was an absolute pain to try and read my Amex and Visa card.
Ended up getting another issue with it and returned the phone under warranty for NFC and the other issue.
Still waiting to get a phone back ?
Sent from my HTC One_M8 using Tapatalk

Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......

pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.

xlrate said:
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.
Click to expand...
Click to collapse
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it

yldlj said:
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it
Click to expand...
Click to collapse
Tried reflashing the 1.53 firmware again (twice) to see if it fixes it, but it's still not working ie Can switch it on and off, but it does not respond to my opal card.
It's only taken Telstra until this month to push out 1.53, so who knows when (or if) 1.80 will happen. Now I'm trying to decide whether it's worth sending back for another handset or waiting to see if the next OTA will fix it. My biggest concern is that the replacement could be on 1.21 and I could possibly end up with the same issue all over again!

pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
I just tried to NFC on 1.53 and it isn't working very well, hardly at all. I got it to work 3 times in about 15 mins...
Previously I think when I was on 1.30 firmware it was working well before but just had to hold it near the head phone jack.
Any Telstra users want to test out the Telstra firmwares
http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520
Make sure you back-up the rom & back up internal storage refer to later posts in that thread.

https://crowdsupport.telstra.com.au/t5/Device-Updates/Software-Updates-01-07-2016/td-p/585953 Telstra 1.80.841.8 firmware is coming 25-Jul
Leedroid is the best rom for Telstra users. Running it myself and working perfectly, now supports Telstra with carrier support & VoLTE working - thanks @LeeDroid
*Only works on Telstra firmware.

Install Ice yesterday (only got my phone Friday ), really like it over the stock rom.
Some people complained about the LED but I like it. My only complaint about my M8 was how bright the LED was specially in the dark when you're trying to get to sleep.
Another problem I'm having is file transfers freeze when using a USB 2 port on Windows 10.
I like my new M10 but not sure if I like it over the M8 as of yet. I preferred the speaker arrangement on the M8 and having the home, back buttons etc on the screen rather then down the bottom.
I have to admit I'm not a fan of the "Samsung" look at all which is why I bought HTC in the past to begin with. I didn't want to be a part of the flock.

Hey guys,
I'm looking to get the 10 but imported, could someone (especially looking for someone with Optus) check their box to see what specific model it is (e.g. 10h or 10u)?
Thanks guys

The Telstra model is a HTC 10h

ICE (InsertCoin) v2.0.6 supports Telstra also now too. Thanks @baadnewz

morgy59 said:
The Telstra model is a HTC 10h
Click to expand...
Click to collapse
Awesome, thanks morgy59

Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?

brantp said:
Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?
Click to expand...
Click to collapse
I found it worked perfectly fine on wwe 1.30 firmware using Leedroid. Now I'm on 1.53, hardly works at all
Sent from my SM-P605 using Tapatalk

It's doesn't read card on 1.53 on Optus build 710