Develop Bugs

mac address

Does anyone know how I can find out the mac address of my xda IIs ? I have a dreytek wireless router at home which uses a mac based access control list. I've tried the addresses that appear in wireless LAN manager ( BSSID and MAC ) but no joy. The only way I can connect is to switch off the access list feature completely
jeff

Hi Jeff,
Switch off the Access control, and let the XDA IIs join the wireless network. Then go into Diagnostic Tools --> View DHCP assigned addresses, and you will get a list of MAC addresses, IP addresses and hosts on the network. Match your phone's name to the MAC address.
Then you can turn access control on again and input the phone's mac address into the "allowed" list.

Thanks for the reply. I've kind of done that as you can see from the DHCP table below
DHCP server: Running
Index IP Address MAC Address Leased Time HOST ID
1 192.168.1.1 00-50-7F-23-97-CC ROUTER IP
2 192.168.1.10 00-00-00-00-00-00 BAD IP
3 192.168.1.11 00-0D-61-4E-A7-F7 0:00:04.600 hubbo
4 192.168.1.12 00-09-2D-0E-49-61 9:24:34.170
(not sure about that BADIP line ! )
I would say my MAC is 00-09-2D-0E-49-61 but it's still not working.... odd.

Is there no way that you can tell the MAC address from the phone without connecting to a network.

Here is a freeware that will allow you to find your MAC with no connection. I used it on my PDA2K.
http://www.freewareppc.com/communication/vxipconfig.shtml
Install on your device. Just turn the wifi on and run the program and it will give you the MAC and additional device info. Don't have the PPC connected to the USB or it will identify that device.

Sorted thanks, whilst in PC World I scanned for a Wireless network, and found three, hehe! Once connected used that utility to get my MAC.
Many thanks!

wifi and drayteck router
hi i see u have a draytech router how did u manage to get streaming video? i have been trying now for hours.I can get the video on my laptop without any problems but my m2000?????
i think the problem lies within the vpn settings as when i try to open http://house:8080 i get the message vpn connection required.
any help would be greatly recived (i have the vigor 2600g)
thanks in advance
delboy

Need help from a Vista user! (Internet Sharing)

I had been successfully tethering via Bluetooth with WM6's Internet Sharing function, and was doing so in XP. Well we just took the Vista plunge and I'm having an issue. The Network Connections is showing my BT connection as "Local Only" meaning I can browse other pc's on the network, but I can't get to the internet. My WiFi connection to my router connects to the internet with no problem (The Wireless Connection shows "Local & Internet Access."
So I can not get out to the internet using my Tytn as my connection. I used the "Diagnose Problem" function in Vista, and it tells me that it cannot ping IP address 192.168.0.1. This is the IP address of my router. I don't want it to try to hit that IP address, but I can't find a way to tell it NOT to. All the settings in TCP/IP protocol are set to obtain an IP address automatically. But it seems that even while using BT as the connection, it still wants to get to my router first, even though I'm not using my WiFi at all. I even tried disabling the WiFi connection. Still the same issue.
Does anyone know what I can do to get the pc to stop trying to get my router first?
Thanks!

Tell me about it! It took me an age to find some drivers that worked with my bluetooth, I ended up using the Toshiba stack. After a lot of fiddling I got it working but when it runs it is very hit and miss and I have yet to transfer anything between devices let alone surf the net! Have you tried the bluetooth set up wizard?
stpete111 said:
I had been successfully tethering via Bluetooth with WM6's Internet Sharing function, and was doing so in XP. Well we just took the Vista plunge and I'm having an issue. The Network Connections is showing my BT connection as "Local Only" meaning I can browse other pc's on the network, but I can't get to the internet. My WiFi connection to my router connects to the internet with no problem (The Wireless Connection shows "Local & Internet Access."
So I can not get out to the internet using my Tytn as my connection. I used the "Diagnose Problem" function in Vista, and it tells me that it cannot ping IP address 192.168.0.1. This is the IP address of my router. I don't want it to try to hit that IP address, but I can't find a way to tell it NOT to. All the settings in TCP/IP protocol are set to obtain an IP address automatically. But it seems that even while using BT as the connection, it still wants to get to my router first, even though I'm not using my WiFi at all. I even tried disabling the WiFi connection. Still the same issue.
Does anyone know what I can do to get the pc to stop trying to get my router first?
Thanks!
Click to expand...
Click to collapse

stpete111 said:
I had been successfully tethering via Bluetooth with WM6's Internet Sharing function, and was doing so in XP. Well we just took the Vista plunge and I'm having an issue. The Network Connections is showing my BT connection as "Local Only" meaning I can browse other pc's on the network, but I can't get to the internet. My WiFi connection to my router connects to the internet with no problem (The Wireless Connection shows "Local & Internet Access."
So I can not get out to the internet using my Tytn as my connection. I used the "Diagnose Problem" function in Vista, and it tells me that it cannot ping IP address 192.168.0.1. This is the IP address of my router. I don't want it to try to hit that IP address, but I can't find a way to tell it NOT to. All the settings in TCP/IP protocol are set to obtain an IP address automatically. But it seems that even while using BT as the connection, it still wants to get to my router first, even though I'm not using my WiFi at all. I even tried disabling the WiFi connection. Still the same issue.
Does anyone know what I can do to get the pc to stop trying to get my router first?
Thanks!
Click to expand...
Click to collapse
The internet sharing function on the TyTn used 192.168.0.1
You are saying that your router is also using the same address range.
That is a no-no. Change the router address to 192.168.1.1, and I think you will see better results.

@boz - Actually I have no issues connecting to Vista via Bluetooth, and all profiles work great (I'm using the latest Broadcomm stack). My issue is in my Network Connections, not BT itself.
@Wildbill - the Tytn is not using 192.168.0.1. The PC is trying to ping that IP address because it is the address of my wireless router, and the first time I ever accessed the net with that pc, I did so via WiFi through my wireless router at home. Now, what I am trying to do though is get on the internet in my car, while nowhere near my wireless router. But my pc still seems to want to get to my router as though I'm trying to connect to the net via Wifi, when I'm actually just trying to get to it through my phone. The PC connects to the phone with no problem, and the phone is connected to the internet, But, my problem is that I can't figure out how to tell my pc to NOT look for my wireless router's IP address first.
BT DUN was so much easier with Cingular. I wish one of the cooks could figure out how to get the DUN profile back into WM6's BT stack.

I am really confused here.
When you use Internet Sharing on the TyTn, You are using the Tytn to allow other devices to access the Internet thru the TyTn.
When you do that, the TyTn hands out the address of 192.168.0.100 and it is the gateway, and the Gateway address is 192.168.0.1.
If you have your home router using the same address range, you have the PC that the Tytn is sharing it's internet connection with seeing to addresses within the same range, and two gateways with the same address - The PC LAN card is seing the router at 192.168.0.1 and the Buetooth PAN is seing the phone gateway at the same 0.1 That is what I was trying to say. It won't work like that.

Oh ok I see what you're saying. I was assuming that when it gave me the error, that it was trying to ping my router since I knew that to be my router's address. I did not realize that the Tytn used such a similar gateway.
To correct what I said in my first post: I said that it was trying to ping "IP address"... the exact error message reads "Connot Communicate with DNS Server 192.168.0.1"
It shows a nifty little diagram of the PC connected to the Cingular Bluetooth network connection, then another line connecting to a picture of earth, which they call "internet," but there is a red "X" over that line showing that it can't connect to internet. When you click on Diagnose problem, the above error message is what comes up.
So now, I need to make sure I understand what you are saying Wildbill. I see what you mean from your post... being that I don't connect to my router anymore, ever, at all (since the pc never comes out of the car anymore, and I'm way out of range of my wireless router even in the driveway) what do I need to change? Everything in TCP/IP protocol settings are set to obtain addresses automatically.
Another interesting thing to note is that I did not have this problem when I had XP in my car, and I connected to my wireless router with that pc too. But Internet sharing worked fine with it.

If the only things connected are the TyTn and a PC, then the PC will obtain an IP from the TyTn, and it will be 192.168.1.100. It will tell the pc that the gateway is 192.168.0.1, which is the TyTn. Since the TyTn has Bluetooth 2.0, I would speculate that you could connect additional BT devices to the same BT PAN, and the TytN would likely hand out additional addreses like 0.101, 0.102, etc. I have not tried that nor have I read about it.

See that's what I gathered too. So I don't know why it can't get out to the internet, unless it's that Vista just won't let it for some reason. This bugs me because Internet Sharing worked fine in XP, and BT DUN works fine with Vista with my other phone. Unfortunately I'm getting rid of that phone. If my Tytn had a DUN profile in the BT stack I'd be fine. Weak.

i tehering in wm6 vista using bluetooth ban

Router cheat sheet for DLNA

So, I was having some strange issues maintaining a connection to my tv and after exhausting options device side, I began looking at the networking side and after some serious tuning of the router settings, I believe I may have found a recipe for success:
Make sure upnp is on.
Ensure DNS IP addresses are being filled in under Setup/Internet/Manual.
Turn off ALL QoS (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking.Setup DHCP reserved IP addresses for all devices on the router.
Ensure devices are set to auto obtain an IP address.
Set Firewall settings to Endpoint Independent for TCP and UDP
I also have my wireless set to wpa and aes in case the encryption was causing the problem.
Hope this helps

What do you mean you were having trouble staying connected to your tv? It would just disconnect or you had trouble connecting to your router?

w7excursion said:
What do you mean you were having trouble staying connected to your tv? It would just disconnect or you had trouble connecting to your router?
Click to expand...
Click to collapse
Either it would time out after connecting, or would not see the tv. I have two wireless routers too so I i had too make sure it was done on both.

[TIP] Wifi connected but no internet connection!

At some points in your life, one of your Android devices connect to a wifi router, but can't connect to the internet. However, your computer, laptop or iPad will connect to that same wifi and use the internet just fine. I've looked everywhere on the internet for solutions, some of them are:
+ Turn off and on both modem and wifi router
+ Factory reset wifi router
+ Battery pull your phone, wait 30s and put it back
+ Reflash stock or custom ROM
+ Change DHCP IP setting to Static
+ Disable security (WEP, WPA) on wifi router
+ Check DNS server, gateway IP address for correctness
Fortunately, I stumbled upon this old thread last night -> http://forum.xda-developers.com/showthread.php?t=1371794
It helped fix the internet connection temporarily, turning off and on wifi on phone caused the issue to repeat.
In summary, he found out the correct MAC address for gateway was mismatched with the one on his phone. Even though the gateway IP address is correct (example: default gateway IP 192.168.1.1)
Upon further investigations, I found out my Wifi ROUTER has the same IP address with my MODEM (192.168.1.1) This IP conflict causes the phone to recognized the WIFI ROUTER's MAC address as the gateway's MAC address. This problem mostly occurs on Android phone, not computer (I'm no tech savvy so I have no idea why)
Simple fix: Go to wifi router setting page, change the IP address on wifi router to different number (other than default 192.168.1.1), and the problem should be fixed.
Please help spread the words to fellow Android lovers, I'm sure a lot of us have struggled with this problem :laugh:

I'm one guy who is desperately looking for a solution to this.
Unfortunately the solution you gave didn't work.

Hi
i have a problem with wifi. it remains connected but loses internet access randomly. i found this solution:
"In the wifi networks, select the network you want and select ‘Forget network’
Turn off the wifi
kill all the apps with your task manager
Turn on the wifi again
Connect to the network
Check the internet connectivity
If still the problem exist, switch off the phone and redo the above steps"
it solves the problem, but it happens again after some minutes. actually, i also installed an app named "wifi fixer" which does the above process automatically. when the program is active, it turns the wifi off and on every 2-3 minutes. and the phone has internet access when the program tuns the wifi on.
any idea?

Turn off wifi optimization on some android phones help.
Sent from my Nexus 7 using Tapatalk 4

(bump) By any chance, are you all using Aztech's router? I have the same problem with my Aztech router.

solution?
---

Had the same problem for several months. Changed my router and everything became prefect.
Sent from my Galaxy Nexus using Tapatalk

---

---

2 years after the last reply I am having the same problem. My wife and kids all have internet access on their phones, tablets, desktop and laptops all from the same modem router yet I am unable to use the internet on my Galaxy S2 mobile phone even though my phone says connected to Wi-Fi Network Netgear 06.
The Mac address solution provided isn't applicable to my situation as my Mac address on my mobile is different to my modem router Mac address.
Any other solution?

[Q] help connecting to FireTV on different LAN subnet?

I have Private Internet Access as a VPN service, and I wanted to use that for my FireTV alone. So I have a second router in my LAN, which basically serves as a VPN filter for my FireTV. Everything else on my network goes through the first router. So it looks like this:
192.168.1.1 = main router
192.168.1.12 = my Macbook
192.168.1.111 = second (VPN) router's address on main network (I can connect to this from my Macbook and administer the VPN router)
10.0.0.1 = LAN address of VPN router
10.0.0.50 = FireTV IP address
So! My question is...how can I ADB connect to my FireTV from my Macbook using adbFire?

You could opt to disable firewall functionality on your VPN router, unless your main router has static routes to your VPN and open for certain ports from the WAN side. That should be the easiest option.
Or you can open specific ports used by ADB on your VPN router to allow inbound traffic to your FTV along with static route to the FTV. In this case, you will connect to FTV using the WAN IP of your VPN router and forward traffic at the designated port(s) to FTV
Or you can run a local hotspot on your FTV using an application like WiFI Tether Router (or even ES File Explorer) and connect your MAC to the router (that is FTV) and work like that. Note, this only works if your FTV is wired and thereby freeing up your wireless so that it can be used for client connections to it. And also, your MAC has to go wireless in this case. But it is a convoluted way to go that way.