if anybody was wondering how far a defy can be pushed but still be stable i think ive found the answer.
im running CM 7.1, overclocked to 1.3 ghz and have been at this clock rate for 3 months+ and have had NO problems. i have scored over 2700 on quadrant standard and the OS runs silky smooth. the overclocking program i use is setvsel off the android market.
Cool....
Mine is 1ghz normal CM7.2 NIGHTLY from Quarx. It's very stable and fast for me.
Playing Modern Combat 3 without lag
I have dual boot with CM7.2 nightly (default OS 1.1ghz OC) and CM9 Epsylon 6th April 1 ghz OC.
Both works pretty fine and stable.
BabiesWithRabies said:
if anybody was wondering how far a defy can be pushed but still be stable i think ive found the answer.
im running CM 7.1, overclocked to 1.3 ghz and have been at this clock rate for 3 months+ and have had NO problems. i have scored over 2700 on quadrant standard and the OS runs silky smooth. the overclocking program i use is setvsel off the android market.
Click to expand...
Click to collapse
I'm running
300 mhz/ vsel 18
600 mhz/ vsel 28
1000 mhz/ vsel 49
Am on WIUI stable, but I wanna know what vsels You've set on 1.3 Ghz
fiskenigaten said:
I'm running
300 mhz/ vsel 18
600 mhz/ vsel 28
1000 mhz/ vsel 49
Am on WIUI stable, but I wanna know what vsels You've set on 1.3 Ghz
Click to expand...
Click to collapse
18 @ 300
[email protected]
[email protected]
never get above 32ish degrees celcius unless im gaming for like an hour then its like 34/35
Related
Just a general question. Fresh, dc, stock, or baked with even overclock highest mflops i got were 9 mflops. So I added Frozen Eclair JIT to Fresh and was able to get 21 mflops @ 1125mhz. I have balanced my phone now for battery life and performance. I am at 537mhz which is giving me 10mflops and 55 fps on netarchy kernel 3.7.1. My question, Is my phone faster @ 537mhz with jit than stock @ 998mhz? I believe that the higher the mflop the faster the phone right?
mflops, is millions of floating point operations. therefore more is better.
This is a VERY interesting question. I kind of doubt that it will receive a good answer, though. I don't know what the answer is.
I would assume that processor speed is king. But if a lower processor speed gets you higher Mflops than, say, my phone than I guess that Mflops are king. I don't know why that would be that way, though.
SWEET I'll take 10mflops @ 537mhz because everything runs flawlessly internet, streaming video, and phone. When I need to game I can turn up the processor to 998 or 1125 and get 17 to 21 mflops. Thanks. My daily driver for now will be 537mhz. More battery life and more power than 2.1 android.
pongoface said:
SWEET I'll take 10mflops @ 537mhz because everything runs flawlessly internet, streaming video, and phone. When I need to game I can turn up the processor to 998 or 1125 and get 17 to 21 mflops. Thanks. My daily driver for now will be 537mhz. More battery life and more power than 2.1 android.
Click to expand...
Click to collapse
**EDIT**Nevermind............i need to get rid of Sense ui
I had a hard time to getting rid of my raining animations too lol
Sent from my PC36100 using XDA App
As the title says whats the max o/c can you get out of your defy?
Im on standard 2.1 and can get 1300mhz @ 80vesl and get 1388 in quadrant.
So if your a o/c nutter and try an get the max out of everything tell us what ya can get!
Sent from my Defy using XDA App
I'm getting 1348 at the stock 800 mhz :/ Got about the same when overclocked. So, meh.
1350/80 stable, 1409 in quadrant. (stock rom)
Sent from my MB525 using XDA App
Pays ROM v5
Quadrant: 1405
setVsel: [email protected] (haven't tried higher than 1100Mhz yet)
I got 14xx (no trick) with 1000 @ 50 and 16xx (no trick) with 1200 @ 62 on finland 2.2.
For how long and how hot did your Defy get?
it ran for about an hour at 1350, and the max temprature was 39°C as i recall. based on abc's results, that jit in 2.2 is a big performance hit, looking forward to the official update
Sent from my MB525 using XDA App
Just ran 1400mhz @ 95vsel
1508 on quadrant
Ran stability test for 2hrs30mins @28°c (had it sitting on an icepack haha)
Stock 2.1 and its very snappy.
Sent from my thumbs
just run [email protected]
quadrant 1709 1st score, 1671 2nd score.
2.2.1 froyo, 3.4.2-155
i got 1589 with 60/1200
Can running such high frequencies and vsels regularly damage the CPU? I'm kind of scared of toasting it, so i stopped at 1100/60 (scaled with setvsel)
iamnik said:
Can running such high frequencies and vsels regularly damage the CPU? I'm kind of scared of toasting it, so i stopped at 1100/60 (scaled with setvsel)
Click to expand...
Click to collapse
i dont think so... did the stability test for around 15 minutes and the temp stays at 38 C
60/1200 with threshold at 80%, everything is so smooth
samoelito said:
i dont think so... did the stability test for around 15 minutes and the temp stays at 38 C
60/1200 with threshold at 80%, everything is so smooth
Click to expand...
Click to collapse
Hmm, i know have it at 62/1200, with threshold at 60%. 80% makes it feel a little laggy.
Hopefully the processor will last the life of the phone at these settings!
Wonder what the rest of the lot here have overclocked their defy´s to in this god sent software.
Mine is as follows:
1: 20/300
2: 40/800
3: 70/1300
Please only post stable results, the one You can use without crasches on an everyday basis...
1: 22/300
2: 32/600
3: 52/1000
Quadrant score of 1785
Running CM7 custom rom.
Battery life seems ok (still monitoring it) and it's stable.
24/300
40/650
63/1200
VSel 3 is on the upper limit of stable. 62 made it reboot after half an hour of stress testing.
Im sure I can go lower on the others, but I haven't bothered.
I haven't used SetVsel yet, but I am overclocked with Milestone Overclock @ 1200/80 with no problems. Battery is not the best, but better than stock rom. I just flashed Quarx's CM7 rom and love it. I went from a 1400 Quadrant to a 1900 Quadrant just from flashing.
300 at 33 600 at 48 900 at 66. High 1700's in quadrant
Sent from my MB525 cm7quarx
Mine is:
[email protected]
[email protected]
[email protected]
up_threshold: 86%
limit to vsel1 while screen is off
limit to vsel2 on battery <= 30%
quit stable to me.
Mine is:
[email protected]
[email protected]
[email protected]
up_threshold: 82%
Good thread chaps, it gives us that haven't had the bottle to do it yet something to go on
My Settings
[email protected]
[email protected]
[email protected]
still testing it..
But even using all the tools my defy's doesnt last long than a day
i'm unable to switch to "2G only" network as I lose signal
Setvsel
300 @ 20
700 @ 40
1100 @ 56
rock stable and better battery life...
Mine is:
[email protected]
[email protected]
[email protected]
up_threshold: 86%
Anybody knows what is the perfect setting for CM7 Beta?
300 - 20
600 - 30
800 - 48
1000 - 56
[email protected]
[email protected]
[email protected]
up_threshold: 80%
ROM: CM7 Beta 5
I use setvsel +ledefy，
setvsel settings：
[email protected]
[email protected]
[email protected]
up_threshold: 82%
ledefy
I use a customer brightness
1300 ? my god, you impreesed me
Runs the defy stable at 1300???
As i said i use 1100 with 58 but i think it could be a bit faster though
escrivel said:
Runs the defy stable at 1300???
As i said i use 1100 with 58 but i think it could be a bit faster though
Click to expand...
Click to collapse
Yes, its 100% stable, in fact in forgot that i started the stability test so i ran it for over an hour... It reached 69° celsius, quite hot in other words...
60/1200 was what i ran before.
PetroLars said:
Yes, its 100% stable, in fact in forgot that i started the stability test so i ran it for over an hour... It reached 69° celsius, quite hot in other words...
60/1200 was what i ran before.
Click to expand...
Click to collapse
I have been running 58/1200 for around few months no issue currently on cm7
Sent from my MB525 using XDA App
[email protected]
[email protected]
[email protected]
Using S. Froyo Nordic I edition based on 3.4.2-177. These settings work good for me as I can easily squeeze 2 days out of my battery with moderate usage. I'd probably get 3 days out of my battery if I'd watch less youtube.
Hello Everyone
Is overclocking the defy to 1GHz is ok?and by ok i mean stable for a long time....and not for few months and then the phone is dead or something
thanx in advance
Many have been OC-ed to 1 ghz without any issue.
I'm running with 1000/52 in setvsel.
Overclocking doesn't harm unless the voltage is correct and not too much. OC to 1 GHz and see the lowest voltage that you can run stable on. Set it as the setting.
Also, CPU scales as per demand so your Defy will not run at 1 Ghz all the time, only when it requires that muscle...
And CPU's do last a long time, my 8 year old Pentium 4 just refuses to die...LOL
Running the Defy at 1000/52 and 75% with Setvsel. No problems and battery-power for full 3 days including a 6 hour geocaching trail. That's ok.
my defy can handle 1,2ghz long term, so you should be fine with 1ghz just make sure you set the vsel right, setting it too high could damage the cpu, setting it too low causes reboot, but no damage. so you can start by setting it to 50vsel, and if your phone is instable (i recommend setvsel and stability test for testing) set it a bit higher!
ok
thank you so much guys
Seriously no one knows, as no one has been owning and overclocking defy for over half year. But I think 1g is fine. Mine can easily go to 1.4g at 7x vsel, though I'm using 1.2g at 62 vsel.
mine maxed out on 1.37ghz, but im still using [email protected] theres nothing i use 800mhz cant handle, and with undervolting i can seriously lower battery consumption.
Mine is OC'd to 1ghz with Milestone overclock with no problems, and it's super fast also.
Hey,
I am currently having official sea15 froyo rom and I want to know the best overclock app and its settings for it to have stable performance and battery life??
Also,will continous overclock to 1ghz hurt my defy or its battery in any way??
Just read a little bit: SetVsel This is the best CPU tweaking app for DEFY, you can download it from the Market.
And the answer is: no, it won't damage your phone, 1.2GHz is still safe. You just have to find the proper vsel values for your phone.
Get vsel, milestone and setcpu and do 1 ghz but scale to 300 when screen is off if your running constant 1 ghz battery will be crap plus it will run hot all the time
Set your vsel to however you feel comfy mine is [email protected] , [email protected] and 58 @ 1ghz goodluck
at 1.1Ghz, 56Vsel is also nice and tested on my device