Develop Bugs

[Scripts][MOD] Supercharger Script! KAK + 3G Turbocharger Amazing!!

I am posting to spread the word for the best scripts on any android device i have ever seen and proven to work on various android phones and tablets that i own! Especially the htc Desire!
Original Thread: http://forum.xda-developers.com/showthread.php?t=991276
by: Zeppelinrox
None of these scripts is my work and only speaking from profound experience! I cannot describe how amazingly these 3 scripts can change the phone completely! It is now Superfast, no lag! and 3G is instant!!
Only works for rooted phones!
Very simple, follow the steps and couple requirements in original thread.
I'm using InsertCoin_GB_Sense 2.1 v1.1.4 rom. This should work for any android device flawlessly with little risk!
My settings for V6 Supercharger script
In script manager make sure root privilege is on but not boot!
512HP Super UL Option 7
then SuperClean and ReStart Option 30
KAK RC3
In script manager make sure root privilege is on and also boot!
Followed and accepted the prompts
3G TurboCharger
In script manager make sure root privilege is on and also boot!
I used Experimental 1
I used the following releases:
V6 SuperCharger Update 9 RC5, 3G TurboCharger RC3, KAK RC3 and DHBC RC2
Download Page: http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021

I was looking at this yesterday as its in mildwild. You really think its good?
Sent from my HTC Desire using Tapatalk

rootSU said:
I was looking at this yesterday as its in mildwild. You really think its good?
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
It's good, this and titanium are the first 2 things I install on a new rom. Makes even sense 3.5 fly on our old desire.
From my HTC Desire AIO

What settings do you use?

I've installed it but to be honest, I already had some tweaks in place that this gives. I haven't noticed any improvements really.
Good for everyone else though. Looks well written.

Alright. After having installed this on my 2.3.3 Desire some 3 hours ago, i do see a noticeable improvement, especially in the way the launcher acts. It's much more fluid, even after a wake-up (when i used to get a little lag). I have configured the Supercharger just as the OP said and i have also installed the "KAK" module. I haven't installed any other module than these two (as i find no need for them).
How to install, for dummies:
1) Download "V6_SuperCharger_for_Android-Update9_RC5.2.sh.pdf" and rename it to "V6_SuperCharger_for_Android-Update9_RC5.2.sh.txt". Download "KickAssKernelizer_Tweaks_Installer_Update_3_RC3.1.sh.txt". Copy both files to the root of your SD card;
2) Go to the Market and download "Script Manager";
3) Open Script Manager and select "V6_SuperCharger_for_Android-Update9_RC5.2.sh.txt". After the "pop-up" opens, click on the SuperUser icon and then click "Run" (no need to modify any other settings). This gives Script Manager root acces, which it needs for the script to be able to modify key system files;
4) Follow the on-screen instructions (that's a no brainer);
5) Do the same for "KickAssKernelizer_Tweaks_Installer_Update_3_RC3.1.sh.txt"*.
*Note - i haven't fiddled with the I/O tweaks, as the script said they're sort of experimental.
Advice: it's best to have an init.d enabled ROM, as this allows the Supercharger and KAK to run their scripts automatically during start-up. This cuts the need to use Script Manager to run them at boot, thus making life easier.

I've been using it for the longest time that I can't remember how my phone works when I don't have this running. CM7 is fast enough as it is... so there really isn't much to push in terms of speed but yeah you'll probably notice some slight improvements here and there.

I wonder what you would think after having it unsupercharged and unkernelized for a couple of days... lol

zeppelinrox said:
I wonder what you would think after having it unsupercharged and unkernelized for a couple of days... lol
Click to expand...
Click to collapse
Maybe when I'm bored I'll uninstall it. I'm happy with your scripts and it's not giving me any negative performance issues to make me remove it.

after 2nd boot... my BravoC feels faster than before, especially when i try to look apps list after booting. superb !!!

would really appreciate a little help with installing this mod.
I read this on the ics thread -
You have to put the file as is it is in the sd card and then run the terminal
emulator and type:
su [enter]
sh \sdcard\[the name of the file] and again enter and then follow the guide.
the name of my file is -V6_SuperCharger_for_Android-Update9_RC8.2.sh
ive tried this many times , not working
do i change file extention by renaming ?

rraaka said:
emulator and type:
su [enter]
sh \sdcard\[the name of the file] and again enter and then follow the guide.
the name of my file is -V6_SuperCharger_for_Android-Update9_RC8.2.sh
Click to expand...
Click to collapse
did you try with this command?
$ su
# sh /sdcard/V6_SuperCharger_for_Android-Update9_RC8.2.sh
make sure the script file is in root directory of your sdcard and busybox already installed.

Thank you so much agis, it worked !
im using insertcoin 114 right now.
my phone booted fine
but im not sure i chose the right options !
it gave some warning about the busybox,.....but proceeded
build or local ? scrolling 1, 2 or 3 ? and many options
id like a guide to optimum preferences
but thanks anyway !! the literature is fun

obviously Im doing something wrong in the options.. my phone freezes from time to time and i have to pull the battery
when we have to choose buil or local...which is right ?
thnx

rraaka said:
obviously Im doing something wrong in the options.. my phone freezes from time to time and i have to pull the battery
when we have to choose buil or local...which is right ?
thnx
Click to expand...
Click to collapse
i choose build.prop and the script is running fine. but i use gingerbread, not ics.
maybe you can consult with the script creator about your problem. the link is in my signature.

[Q] Installing Supercharger V6

Hi,
I am trying to install "V6_SuperCharger_for_Android-Update9_RC5.2.sh.pdf" on my rooted and unlocked arc with .62fw. I have busybox version of 1.19.4 and have the supercharger file on root of sdcard. when i run the script manager and try to run, it says
V6_SuperCharger_for_Android-Update9_RC5.2.sh.pdf
sh:applet not found.
I have the .tar file for busybox v1.18.2 but i am not able to install it.
Please advise.
Rgds,
Rxhy

Remove the .pdf extension of the file and run it again via Script Manager.

try busybox installer from the market

I tried it but dint work.I tried by renaming it to .txt but no luck...

rexhyd said:
I tried it but dint work.I tried by renaming it to .txt but no luck...
Click to expand...
Click to collapse
Delete.pdf
So it ends in .sh
Use script manager to run
Stick a widget on home screen
Sent from my MT15i using Tapatalk

I have done that..uninstalled and again downloaded..but not working..
Am is missing something?

rexhyd said:
I tried it but dint work.I tried by renaming it to .txt but no luck...
Click to expand...
Click to collapse
Your file name should be like
V6_SuperCharger_for_Android-Update9_RC5.2.sh
You must have that .sh file extension
Or better yet, download the RC6.9 version of the supercharger
And don't forget to touch the image above the 'Su' in Script Manager

Have u give the script SU permission?
Sent from my LT18i using xda premium

Hi,
Tried just now..but dint work..
I have busybox v1.18.2 as tar file..how to load it?
Thnx,
RxHy

Thanks...
I have the 6.9 version as well..and my file name ends with .sh after deleting the .pdf.
but i got the same result..applet not found.
"And don't forget to touch the image above the 'Su' in Script Manager"
what is this? I dint notice any Su or image...
Sorry: I got it. The image is for root...

rexhyd said:
Thanks...
I have the 6.9 version as well..and my file name ends with .sh after deleting the .pdf.
but i got the same result..applet not found.
"And don't forget to touch the image above the 'Su' in Script Manager"
what is this? I dint notice any Su or image...
Click to expand...
Click to collapse
First of all, You must be rooted to use the script.
Second, Download ScriptManager from market, free app will do the job.
After installing it,when you rum the app for the first time,it will ask you to "browse as root".You must check the box and then a proceed.You will get some pop-ups and click ok/yes and keep moving till the app gets loaded.
Now, browse to the folder where you have kept the script and open it.
The script manager will open a pop-up and there you must select "run as root" or select "SU" icon and then run the script.
Follow the instructions from the script and then your phone should get SuperCharged!!

Hi,
I was able to install Supercharger finally
I dint find the exact problem..seems there is some issue with the script manager..i totally uninstalled and installed the app almost 12 times..
The process is simple and there is step by step guide on this forum..Really a big THANKS to all the experts there...
Regards,
RxHy

Have to reinstall this script if i upgrade the kernel or rom?

Coolgoly said:
Have to reinstall this script if i upgrade the kernel or rom?
Click to expand...
Click to collapse
If you update the rom then you must reinstall the script.

And for kernel only?

ZipIT and Supercharger V6
Hi,
Can use both ZipIT script and Supercharger together?
I want to increase the Battery performance...

Heres a thing ive been wondering for a while...how does the widget actually work? What does it show?
Sent from my LT18i using Tapatalk

[Q] Installing V6 Supercharger Help!

How do I install the V6 Supercharger script from the galaxy w on stock rom?

Well as far as i know, the script itself only need su / root permission to launch, not a custom rom .
So i think how to install it is still quite the same :
(From Kezra in his thread : http://forum.xda-developers.com/showthread.php?t=1438452)
Instructions for V6 Supercharger
(1) Download this file and put in somewhere in your memory card
(2) Go to the Market and download "Script Manager"
(3) Open Script Manager and go to Config and choose "Browse as Root"
(4) Browse to where the script is and choose it
(5) Select only the ROOT symbol and then RUN
(6) First choose option 2 and when asked again choose option 6 (if you feel like taking a chance, choose option MEGA RAM 2) and V6 will install.
(7) After you are done with installing browse to /data/ in the memory of the phone, a file called 99SuperCharger.sh will be there
(8) Choose it, select run at boot
(9) Reboot and you should be done, enjoy.
Click to expand...
Click to collapse
Sent from my GT-I8150 using Tapatalk

Here is the original post:
http://forum.xda-developers.com/showthread.php?t=991276
I just ran the script on my W - works amazing!!! you will feel a change in speed and lag.
my only problam is that it closes my Go keyboard if i do "clear memory".

I have a problem. I tried to install this scrip like in the describtion. But the most messages I get is " not found"! What I made wrong? I have a rooted stock-rom.
Gesendet von meinem GT-I8150 mit Tapatalk

Edea said:
I have a problem. I tried to install this scrip like in the describtion. But the most messages I get is " not found"! What I made wrong? I have a rooted stock-rom.
Gesendet von meinem GT-I8150 mit Tapatalk
Click to expand...
Click to collapse
In the scrip manager you must check run as root, after you select the V6 scrip, click the su logo and run, just follow the instruction given step by step.

It doesn´t work here too. Error is "87: Syntax error: expecting "in""
Busybox in version 1.18.2 is installed.

Have you installed busybox?

No one got an idea about the error i posted?

tanktoo said:
It doesn´t work here too. Error is "87: Syntax error: expecting "in""
Busybox in version 1.18.2 is installed.
Click to expand...
Click to collapse
tanktoo said:
No one got an idea about the error i posted?
Click to expand...
Click to collapse
What version of V6 Sc you got??
latest version, V6 SuperCharger Update 9 RC7 is here:
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Some posts above are giving Update 8.....
you using script manager??
I will get back later with more fuller instructions!!!

Yes scriptmanager. I will try the new version.
Edit: it´s installing now.

Is my phone supercharged now (see pics) ?
Because i don't see (feel) much difference
thnx

diederikmo said:
Is my phone supercharged now (see pics) ?
Because i don't see (feel) much difference
thnx
Click to expand...
Click to collapse
U can run V6 supercharge script and check all the status there. It will show the percentage of supercharge.
Of course, u might not "feel" it. But ur phone has better multitasking and ram management then before.

Darn Rebooting Cycle
i tried the newest supercharger and i have done all the correct setting on stock rom.
it was all going perfect then when i reboot my phone it loads up normally then after 25seconds it reboots over and over again. to stop this i have to remove the memory card from the device
i quickly undone the script and deleted the 99 data file.
For all of this rom and kernel and flashing is much more complicated than the ios jailbreaking. and i try to do it. wipe my phone and all of the instructions but it never works for me. i have rooted my phone.
and a question what is your default VM heap and what are you currently using.
finally when i first got my phone the version was 2.3.6 now is 2.3.5.

I installed. Exit the script. Then went to data. I saw that 99supercharger.sh....clicked....it showed: "open as", but cannot choose to set on boot or sth. now restore my rom and install again. Can you teach me as soon as possible?

Brian_SGW_CM9 said:
I installed. Exit the script. Then went to data. I saw that 99supercharger.sh....clicked....it showed: "open as", but cannot choose to set on boot or sth. now restore my rom and install again. Can you teach me as soon as possible?
Click to expand...
Click to collapse
Did u open the 99supercharger.sh file from script manager?
It should be work if u do that... Set for "su" and "boot" then..
Sent from my GT-I8150 using XDA

Here's what i did on mine.
1. Download V6 SuperCharger Starter Kit. This includes the latest busybox and all you need to start.
2. Download Supercharger script(i use the RC8.2).
3. Before you run any supercharge script MAKE SURE that you uninstall any memory management application(eg. Ram Manager, etc, etc,) or else it won't run and gives an error "cr-app".
4. Run the StarterKit, just run StartMeUp.sh to install everything at once.
5. Run The RC8.2 (incase the keyboard doens't show just long press on the screen and choose "Select Input Method" and choose your prefered keyboard, thanks to mohza).
6. Somewhere on the process you would need to choose on build.prop or local.prop, Choose Build.prop because sometimes the Local.prop doesn't stick.
7. After the configurations, you need to choose on what you want to run, Choose Number 7 or the Aggressive Super Ledded (higher OOM its 125mb :highfive: , if you doesn't know what i mean just ignore this ).
8. Install the Nitro Lag Nullifier(experimental but who knows?).
9. That's it, there's something displayed there(just search for it) on how many
percentage your supercharge is, if its 100% then your done, oh and make a widget for 99supercharge.sh incase you need to run it next time when it won't run on boot.
10. try some experiment
NOTE: Anything you can see that is not included on the steps i provided means you are the one who needs to decide and those doens't affect much.
Hope this helps :good:

Hi guys, who can give me the tutorial to install V6 Supercharger ? ? Please .....

[HOW TO] RE-ODEX a DEODEXED rom with OdexMe app

I was browsing Galaxy S II xda thread when suddenly I found one thread started by paulobrien with very interesting app to RE- ODEX a DEODEXED stock / custom rom. I tried it with my phone which is running Perka's CompilationROM based on the leaked XXELK4 rom and it's working just fine till now. For more info about my setup, read my signature.
For step by step guide, follow the steps below (courtesy of theking_13. To go to the original HOW TO thread, click this)
"Odex Me" by Paulobrien! Here's the link to the original thread, all credit goes to him!
http://forum.xda-developers.com/show....php?t=1215271
Now here's where my part comes in, my step-by-step guide!
This will work on ANY DEODEXED ROM.
*Use this only AFTER you've made any changes to the framework or flashed .zips that change the framework.*
First and foremost, make a backup! You should always do this before messing with system files!
1) Make sure you have a rooted rom, without root the app won't do much but install.
2) Allow "Unknown sources" by going into Settings > Security > and scroll down.
3) Download the .apk either down below, or from the link above.
4) Install as a normal app.
5) Open the app, make sure you give it root access, and it will run.
6) Let it run, it will reboot your phone, take around 5-10 minutes, and then reboot again. You will be greeted by "Android is upgrading" which means its rebuilding your dalvik cache.
7) Once its at the lock screen, done! You can make sure it did its job by using a file explorer with root access (I use Root Browser, if that helps) and go to the root of your phone's memory, go to system > app, and you should see a bunch of "appnamehere".odex files.
Please show appreciation by pressing the thanks button for theking_13 and also paulobrien (without him, this easy-odex app simply won't exist)

I need an reverse tool ?

with this tool, can we re-odex this mod?
http://forum.xda-developers.com/showthread.php?t=2019109

No because it odexes only /system/app

Akshay (Aky) said:
I need an reverse tool ?
Click to expand...
Click to collapse
Me too +1
Sent from my GT-I9300 using Tapatalk 2

Does this also odex the framework files?

【JB】【CM10.1】 How to patching services.jar

My system is CyanogenMOD 10.1 (Android4.2.2). I want someone to help me patch the 4.2.2's services.jar
If someone know how to patch the 4.2.2's services.jar,I will very appreciate!

Do the following in order as i'm writing it down
Do the following in order as i'm writing it down
you need to root your phone before you start.
1. Download SManager, Busybox apps from playstore
(go to play store and search for apps)
2. Download a package for seting up V6 Supercharger and a V6 supercharger script(it is a long set of commands). Just download setup file and latest script
(go to this link <http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021> )
3. Go and download service.jar patch. just download the [dot]exe[dot]zip file. it is an exe file so remove [dot]zip from file extension once you have downloaded.
(go to this link <http://forum.xda-developers.com/showthread.php?t=1914159>)
4. Now you need a computer to perform automatic patching.Download latest Java version.
5. Extract the contents of supercharger_starter_kit.
6. Launch SManager from your device.
7. just run StartMeUp.sh (select superuser) to install everything at once. This file is in the extracted folder.
8. Run V6supercharger script (select superuser). read and press yes or no accordingly.
9. now you'll see V6supercharger script saying device is 50% supercharged
10. now you need to run that service.jar patcher exe file downloaded earlier.
11. do as it says. At the end of code type reboot in the command_prompt_box
12. Run the V6supercharger script again. It should say 100% supercharged.
13. Thank me when it works for you.
These were the steps i followed. I'm not responsible for anything went wrong. each link redirects you to a thread where you can read the detail procedure.
Ask me questions if you have doubt(s).