[Q] Flastool 0.7.0.0 not installing bloatware - Xperia Arc Q&A, Help & Troubleshooting

Only now realised my title is misleading. It should read "Flastool 0.7.0.0 not uninstalling bloatware"
I have upgraded my arc to the official ICS using flashtool, and then rooted the phone using using Doomlord's instructions on this thread: [ROOT] Rooting Toolkit for Xperia 2011 ICS [FW:.562]{LOCKED BOOTLOADERS ALSO}
Once all was done and the phone was up and running I reconnected with flashtool and wanted to clean it by removing all the crapware. I went through the list and and completed the process. The apps I sellected for removal was copied to the apps_saved folder but after the phone rebooted all those apps were still on the phone and not removed at all.
Any suggestions, or let me know if you require any further information from me.
15/005/2012 19:05:27 - INFO - <- This level is successfully initialized
15/005/2012 19:05:27 - INFO - Flashtool Version 0.7.0.0 built on 2012-04-14 11:34:01
15/005/2012 19:05:27 - INFO - You can drag and drop ftf files here to start flashing them
15/005/2012 19:05:31 - INFO - Device disconnected
15/012/2012 19:12:35 - INFO - Device connected with USB debugging off
15/012/2012 19:12:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
15/012/2012 19:12:36 - INFO - Device connected with USB debugging on
15/012/2012 19:12:37 - INFO - Connected device : LT18
15/012/2012 19:12:37 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
15/012/2012 19:12:37 - INFO - Android version : 4.0.3 / kernel version : 2.6.32.9-perf
15/012/2012 19:12:37 - INFO - Root Access Allowed

Related

HELP NEEDED ASAP: Bricked Arc after Unlocked & OTA Update :-(

Hello,
I recently unlocked the bootloader on my new SE Arc the other day so i could root it. After rebooting the phone it said there was an update available OTA so i updated it not realising that it could seriously damage your phone & it updated, rebooted and now nothing.
It didnt switch on or repond to anything except "Back" and "Power On" - When i done this with the USB attatched i managed to get the x10 Flash tool to work with it so i sent it the LT15i_3.0.1.A.0.145_GenericUK.ftf firmware and it sent fine but the phone still will not switch on!
Now everytime i press the power on button the LED flashes green on the right hand side.
Its the Xperia Arc on Vodafone with version 2.3.2 originally.
Please please can anyone help! Does it mean that it is totally useless now?
Thank you
Here is the log from FlashtoolL
15/007/2011 21:07:19 - INFO - <- This level is successfully initialized
15/016/2011 21:16:37 - INFO - Preparing files for flashing
15/016/2011 21:16:53 - INFO - Searching Xperia....
15/016/2011 21:16:55 - ERROR - Please plug you device in flash mode
15/016/2011 21:16:56 - INFO - Searching Xperia....
15/016/2011 21:16:56 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&30729A40&0&6
15/016/2011 21:16:56 - INFO - Start Flashing
15/016/2011 21:16:59 - INFO - PROT_VER="03";DATE="20110217";TIME="15:47:00";VER="R4A066";CXC="1234-5769";TYPE="S1_LOADER";UNIQUE_DEV_ID="07634881BC277A396E13B74032EFD53708AE5DAD";SEC_LOCK_STATUS="LOCKED";OTP_DATA="4B6D7100471404C81508042800B84DD9B001002000000000";IMEI="01268200375554";AID_VERSION="0004";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";HWCONF_AID="0001";PROD_ID="0001";ACTIVE_LOADER_AID="0001";MEMDEVS="02:00:002C:00B3:0000:00002000:00020000:00000800:00000040,03:03:0003:5344:0080:0003B598:00010000:00000200";MAN_ID="002C";DEV_ID="00B3";SIN_VER="0001";AID_TAMP="NOT_TAMPERED";MAX_PKT_SZ="00010000";AUTH_LEVEL="NONE";AUTH_MET="0001";CARD_PRESENT="YES";CARD_SIZE="16GB";CARD_DATA="";LOADER_ROOT="S1_Loader_Root_773f";EROM_ROOT="S1_EROM_Root_d601";SW_ROOT="S1_SW_Root_883f";CUST_ROOT="S1_Cust_Root_9603";SIM_LOCK_ROOT="S1_SL_Root_c422";HW_CONF_ROOT="S1_HWConf_Root_08af";BIM_STATE="DISABLED";
15/016/2011 21:16:56 - INFO - Flashing loader
15/016/2011 21:16:59 - INFO - Flashing adsp.sin
15/017/2011 21:17:02 - INFO - Flashing kernel.sin
15/017/2011 21:17:04 - INFO - Flashing amss_fs.sin
15/017/2011 21:17:04 - INFO - Flashing fota1.sin
15/017/2011 21:17:05 - INFO - Flashing fota0.sin
15/017/2011 21:17:06 - INFO - Flashing apps_log.sin
15/017/2011 21:17:06 - INFO - Flashing amss.sin
15/017/2011 21:17:16 - INFO - Flashing cache.sin
15/017/2011 21:17:17 - INFO - Flashing system.sin
15/019/2011 21:19:20 - INFO - Flashing userdata.sin
15/019/2011 21:19:22 - INFO - Flashing finished.
15/019/2011 21:19:22 - INFO - Now unplug the device and power it on
15/019/2011 21:19:22 - INFO - Then go to application settings
15/019/2011 21:19:22 - INFO - turn on Unknown Sources and Debugging
Did you look at this thread, youre not the only one : http://forum.xda-developers.com/showthread.php?t=1106250
I'm not sure if it helps, but i recently bricked my phone but a different way. But it was doing exactly the same as your phone ... the Green LED would flash briefly then nothing happens... what I did was disconnect the battery then powered on to discharge any static charge left in the phone, I then connected the battery and connected it to the mains to fully charge the phone. After that, I re-flashed and disconnected from PC and powered on and booted just fine.
I think you are lucky J has found a fix !
http://forum.xda-developers.com/showthread.php?t=1126358
The problem existed with the old fix by latest "Fix", still can't detect and find the network and simcard!!

[Q] Help! can't install generic rom with flashtool

Hi,
I installed this kernel: DooMKernel ICS ALPHA v03 [ 2.0GHz version ] (will showup as #1) on my arc to install the Alpha ICS rom.
Now i want to go back to the generic SE stock , i downloaded this STOCK LT15a v2.3.4, 4.0.2.A.0.42 Generic America. I've tried to install it via flashtool, but here's what appears:
20/010/2011 13:10:41 - INFO - <- This level is successfully initialized
20/010/2011 13:10:46 - INFO - Device connected in flash mode
20/011/2011 13:11:02 - INFO - Selected LT15i_4.0.A.2.368_Generic Global.ftf
20/011/2011 13:11:02 - INFO - Preparing files for flashing
20/011/2011 13:11:06 - INFO - Device disconnected
20/011/2011 13:11:30 - INFO - Device connected in flash mode
20/011/2011 13:11:53 - INFO - Searching Xperia....
20/011/2011 13:11:53 - INFO - Found at USB\VID_0FCE&PID_ADDE\6&2AC8B0D5&0&3
20/011/2011 13:11:53 - INFO - Start Flashing
20/012/2011 13:12:08 - ERROR - Error flashing. Aborted
20/012/2011 13:12:08 - INFO - Now unplug the device and power it on
20/012/2011 13:12:08 - INFO - Then go to application settings
20/012/2011 13:12:08 - INFO - turn on Unknown Sources and Debugging
20/012/2011 13:12:10 - INFO - Device disconnected
I dont know what to do, please help me.
Thanks
is there anyone that can help me plkease?!?!?!

[Q]Xperia Play R800i flashing problems.

Hi. I tried last night to flash several .42 firmwares, including R800i_4.0.2.A.0.42_Generic_UK and R800i_4.0.2.A.0.58_Generic Hong Kong Trade, in order to get rooting access. But, after I connected the phone in flash mode and selected the firmware I wanted to flash it, I received an error: Flash canceled ; Device disconnected .
The usb debugging is on, I selected MSC. The program I used is Flashtool; What I'm doing wrong ? Thanks.
Code:
18/037/2012 00:37:57 - INFO - <- This level is successfully initialized
18/037/2012 00:37:57 - INFO - Flashtool Version 0.8.0.0 built on 2012-05-27 21:57:12
18/037/2012 00:37:57 - INFO - You can drag and drop ftf files here to start flashing them
18/038/2012 00:38:03 - INFO - Device disconnected
18/038/2012 00:38:16 - INFO - Selected R800i_4.0.2.A.0.42_Generic_UK.ftf
18/038/2012 00:38:16 - INFO - Flash canceled
18/052/2012 00:52:33 - INFO - Selected R800i_4.0.2.A.0.58_Generic Hong Kong Trade.ftf
18/052/2012 00:52:33 - INFO - Flash canceled
18/052/2012 00:52:40 - INFO - Device connected in flash mode
18/052/2012 00:52:51 - INFO - Selected R800i_4.0.2.A.0.42_Generic_UK.ftf
18/052/2012 00:52:51 - INFO - Flash canceled
18/052/2012 00:52:58 - INFO - Selected R800i_4.0.2.A.0.42_Generic_UK.ftf
18/052/2012 00:52:58 - INFO - Flash canceled
18/053/2012 00:53:02 - INFO - Device disconnected
Firstly, the current version of flashtool is 0.8.6.0 so grab the update and apply that. Secondly, in the flashtool directory is a subdirectory called drivers (from memory, I use linux and we have native drivers), install these making sure you select the Play driver and flash/fastboot support and try again.
nurofenplus said:
Firstly, the current version of flashtool is 0.8.6.0 so grab the update and apply that. Secondly, in the flashtool directory is a subdirectory called drivers (from memory, I use linux and we have native drivers), install these making sure you select the Play driver and flash/fastboot support and try again.
Click to expand...
Click to collapse
Okay, I updated the flashtool version to 0.8.6.0, I installed the drivers you said, but I receive the same error Flash canceled. My OS is Windows XP Professional. Maybe that could be a problem ?
Regards.
LE: I receive the same error even on Windows 7. Damn, what I can do ?
bogsplay said:
Hi. I tried last night to flash several .42 firmwares, including R800i_4.0.2.A.0.42_Generic_UK and R800i_4.0.2.A.0.58_Generic Hong Kong Trade, in order to get rooting access. But, after I connected the phone in flash mode and selected the firmware I wanted to flash it, I received an error: Flash canceled ; Device disconnected .
The usb debugging is on, I selected MSC. The program I used is Flashtool; What I'm doing wrong ? Thanks.
Code:
18/037/2012 00:37:57 - INFO - <- This level is successfully initialized
18/037/2012 00:37:57 - INFO - Flashtool Version 0.8.0.0 built on 2012-05-27 21:57:12
18/037/2012 00:37:57 - INFO - You can drag and drop ftf files here to start flashing them
18/038/2012 00:38:03 - INFO - Device disconnected
18/038/2012 00:38:16 - INFO - Selected R800i_4.0.2.A.0.42_Generic_UK.ftf
18/038/2012 00:38:16 - INFO - Flash canceled
18/052/2012 00:52:33 - INFO - Selected R800i_4.0.2.A.0.58_Generic Hong Kong Trade.ftf
18/052/2012 00:52:33 - INFO - Flash canceled
18/052/2012 00:52:40 - INFO - Device connected in flash mode
18/052/2012 00:52:51 - INFO - Selected R800i_4.0.2.A.0.42_Generic_UK.ftf
18/052/2012 00:52:51 - INFO - Flash canceled
18/052/2012 00:52:58 - INFO - Selected R800i_4.0.2.A.0.42_Generic_UK.ftf
18/052/2012 00:52:58 - INFO - Flash canceled
18/053/2012 00:53:02 - INFO - Device disconnected
Click to expand...
Click to collapse
this can b fixed by getting flashtool v0.6.9.1 i had the same problem
xperiaplayicsuser2013 said:
this can b fixed by getting flashtool v0.6.9.1 i had the same problem
Click to expand...
Click to collapse
Thanks a lot mate, I did it. I finally flashed the .42 firmware. Now I'm gonna root the phone. Thanks again.
@nurofenplus Thanks for your help.
I've had this problem, I think I ended up either just doing it again(installing the drivers) or maybe even installing the x10 driver set??? Think I read somewhere long ago they work? Might be wrong...he'll maybe I installed em all! It was a few flashes ago... In any case u should have to select "install anyway" on a few unsigned drivers, And remember, back button whilst plugging in USB for flash(green light) search button whilst plugging in for fastboot(blue light) it will certainly be a driver issue on pc, mtp and debugging are irrelevant in flasmode(I think ), it's not a good idea to use a USB hub or even front panel ports if you suspect they are a bit dodgy(ie, part of a combination card reader etc, it also doesn't hurt to always run flastool ad administrator. Hope this helps.
Sent from my R800i using xda app-developers app
@xplayed Yeah, I know, I installed & reinstalled the Xperia Play drivers several times, but it didn't work it. The problem was probably with the program version I used, because after I used flashtool v0.6.9.1 it worked like a charm.
Okay, after I flashed and rooted my XPlay, I tried to install a custom rom ([ROM + THEME] [GSM] [2.3.4] Gin2JellyBean [v1.8.1] |Fast|Smooth|Stable|Eye Candy|), but I reached step 6 and I don't know what to do. How do I flash that custom rom on my phone ? May someone point me a tutorial or be kind and explain me what to do ? Regards.
I had this problem and what I did is just flashed my stock kernel in fastboot but it sure is a program error and not our fault.
Sent from my R800i using xda app-developers app

Xperia Play, R800i to r800a problem

Hey, I´m having this issue with my R800i, I flashed to this rom of the R800a From elnacho Telcel (Mexico) R800a firmware (from this thread to have the 3G, that here in my country is 850, I searched and some says that is an firmware issue, but now I know that is an hardware issue. I want to come back to this rom but I can´t.. I´m having this error
16/028/2012 00:28:58 - INFO - Connected device : R800
16/028/2012 00:28:58 - INFO - Installed version of busybox : N/A
16/028/2012 00:28:58 - INFO - Android version : 2.3.3 / kernel version : 2.6.32.9-perf
16/030/2012 00:30:09 - INFO - Selected R800i_4.0.2.A.0.42_Generic_UK.ftf
16/030/2012 00:30:09 - INFO - Preparing files for flashing
16/030/2012 00:30:10 - INFO - Please connect your device into flashmode.
16/030/2012 00:30:49 - INFO - Device disconnected
16/031/2012 00:31:08 - INFO - Device connected in flash mode
16/031/2012 00:31:08 - INFO - Opening device for R/W
16/031/2012 00:31:08 - INFO - Reading device information
16/031/2012 00:31:08 - INFO - Phone ready for flashmode operations.
16/031/2012 00:31:09 - INFO - Start Flashing
16/031/2012 00:31:09 - INFO - Flashing loader
16/031/2012 00:31:09 - INFO - Ending flash session
16/031/2012 00:31:09 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/031/2012 00:31:09 - ERROR - Error flashing. Aborted
16/031/2012 00:31:09 - INFO - Device connected in flash mode
I searched a solution on this forum, but I can´t find it.. my phone is stuck on the r800a and i really want to come back to the r800i.. On the first attemp worked fine the flash, but when the fone boots is always the r800a from telcel.. thanks... sorry for my bad english
mine was r800a with rogers and i flashed this r800i firmware using flashtool. http://www.mediafire.com/?8qq6d21b9lq6vby . try it out n tell my wat happens
so wat happened???
Work it.. Thank youu so much.. I was scary jaja. Sorry for the late reply..
Sent from my R800i using xda app-developers app

[Q] how to revert to stock (XPERIA)

i got xperia SL, and i mod it, and now i want to revert it back to stock,
can anyone tell me what all the things i need, and other stuff ?
Thanks
i see some open source file on sony website,
http://developer.sonymobile.com/downloads/xperia-open-source-archives/
can i use one of that same build before to my phone ?
sorry for my english :S
NomNomM said:
i got xperia SL, and i mod it, and now i want to revert it back to stock,
can anyone tell me what all the things i need, and other stuff ?
Thanks
i see some open source file on sony website,
http://developer.sonymobile.com/downloads/xperia-open-source-archives/
can i use one of that same build before to my phone ?
sorry for my english :S
Click to expand...
Click to collapse
Just install sony's flashtool and you don't need anything more...Easiest way to revert back to stock..
READ THE INSTRUCTIONS BEFORE INSTALLING!!!!!
Sent from my iPhone 6 using android 5.0
ap030993 said:
Just install sony's flashtool and you don't need anything more...Easiest way to revert back to stock..
READ THE INSTRUCTIONS BEFORE INSTALLING!!!!!
Sent from my iPhone 6 using android 5.0
Click to expand...
Click to collapse
any link and instructions ? thanks
NomNomM said:
any link and instructions ? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2032867
Sent from my iPhone 6 using android 5.0
ap030993 said:
http://forum.xda-developers.com/showthread.php?t=2032867
Sent from my iPhone 6 using android 5.0
Click to expand...
Click to collapse
no luck for me, it can detect but no service ,
~Xperia SL
NomNomM said:
no luck for me, it can detect but no service ,
~Xperia SL
Click to expand...
Click to collapse
You have to connect the phone in flashmode
Open the flashtool , switch off your phone , hold vol. down and plug the usb in your pc/laptop ..then it will detect...
i mean i do that, now it says no services
Supported phones & flash keys
In the beta version of the flash tool for Xperia™ devices, only a limited number of phone models and software versions are supported.
Please note that when you connect your phone to the computer to flash the phone, it must be turned off and you must hold the flash key listed below. Flash keys vary between models.
Supported phones and flash key mappings
Xperia™ S – volume down
Xperia™ arc – back
Xperia™ arc S – back
Click to expand...
Click to collapse
here
my devices is not listed :S
NomNomM said:
i mean i do that, now it says no services
here
my devices is not listed :S
Click to expand...
Click to collapse
Ok if that doesnt work , flash one of the available firmwares in development section using flashtool...
Sent from my iPhone 6 using android 5.0
To revert back to stock, just connect to PC Companion and use the Repair function (click on the "Your phone is up to date" link). Warning: all your data will be wiped too.
hush66 said:
To revert back to stock, just connect to PC Companion and use the Repair function (click on the "Your phone is up to date" link). Warning: all your data will be wiped too.
Click to expand...
Click to collapse
no luck, pls see attached images, thats happen.
ap030993 said:
Ok if that doesnt work , flash one of the available firmwares in development section using flashtool...
Sent from my iPhone 6 using android 5.0
Click to expand...
Click to collapse
no available firmware all is for S , nothin for SL
hey i got this
i got a stock ftft file now, so what now ?
pls anyone help me
NomNomM said:
i got a stock ftft file now, so what now ?
pls anyone help me
Click to expand...
Click to collapse
Install flashtool, install drivers
Power off your phone, hold down vol. Down button and plug it in ur pc/laptop , then drag the ftf and drop it in the flashtool, thats it, flashing will start automatically..
Sent from my iPhone 6 using Android 5.0
NomNomM said:
no luck, pls see attached images, thats happen.
Click to expand...
Click to collapse
Use Flashtool.
NomNomM said:
no luck, pls see attached images, thats happen.
Click to expand...
Click to collapse
You should have mentioned that you had unlocked your bootloader. Anyways, just follow what ap030993 mentioned above.
i got this
10/031/2012 20:31:24 - INFO - <- This level is successfully initialized
10/031/2012 20:31:24 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
10/031/2012 20:31:24 - INFO - You can drag and drop ftf files here to start flashing them
10/031/2012 20:31:33 - INFO - Device disconnected
10/032/2012 20:32:29 - INFO - Device connected in flash mode
10/033/2012 20:33:04 - INFO - Selected LT26ii_4.0.4_DE_6.1.A.2.45.ftf
10/033/2012 20:33:04 - INFO - Preparing files for flashing
10/033/2012 20:33:09 - INFO - Please connect your device into flashmode.
10/033/2012 20:33:14 - INFO - Device disconnected
10/033/2012 20:33:17 - INFO - Opening device for R/W
10/033/2012 20:33:19 - INFO - Start Flashing
10/033/2012 20:33:19 - INFO - Processing loader
10/033/2012 20:33:19 - INFO - Checking header
10/033/2012 20:33:19 - INFO - Ending flash session
10/033/2012 20:33:19 - ERROR -
10/033/2012 20:33:19 - ERROR - Error flashing. Aborted
10/033/2012 20:33:20 - INFO - Device disconnected
10/033/2012 20:33:23 - INFO - Device connected with USB debugging off
10/033/2012 20:33:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
10/034/2012 20:34:43 - INFO - Device disconnected
2nd try , i off usb debug
10/037/2012 20:37:38 - INFO - <- This level is successfully initialized
10/037/2012 20:37:38 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
10/037/2012 20:37:38 - INFO - You can drag and drop ftf files here to start flashing them
10/037/2012 20:37:43 - INFO - Device connected in flash mode
10/037/2012 20:37:55 - INFO - Selected LT26ii_4.0.4_DE_6.1.A.2.45.ftf
10/037/2012 20:37:55 - INFO - Preparing files for flashing
10/038/2012 20:38:01 - INFO - Please connect your device into flashmode.
10/038/2012 20:38:04 - INFO - Opening device for R/W
10/038/2012 20:38:04 - INFO - Reading device information
10/038/2012 20:38:12 - INFO - Unable to read from phone after having opened it.
10/038/2012 20:38:12 - INFO - trying to continue anyway
10/038/2012 20:38:13 - INFO - Start Flashing
10/038/2012 20:38:13 - INFO - Processing loader
10/038/2012 20:38:13 - INFO - Checking header
10/038/2012 20:38:13 - INFO - Ending flash session
10/038/2012 20:38:13 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
10/038/2012 20:38:13 - ERROR - Error flashing. Aborted
10/038/2012 20:38:13 - INFO - Device disconnected
10/038/2012 20:38:23 - INFO - Device connected with USB debugging off
10/038/2012 20:38:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
Have you plug in your phone into Flashtool in FlashMode?
Do follow the guide I answered in your another thread.
http://forum.xda-developers.com/showthread.php?t=2038445
See you have any problem...

Categories

Resources