Does anyone have the stock ATT ROM for this device?
I've had some random issues with it that I'd like to go back to factory stock and see if they're hardware related or not. I've done hours of searching and can't find any information on it anywhere.
Help please?
here you can find stock rooted roms: http://forum.xda-developers.com/showthread.php?t=1584427
Roeni said:
here you can find stock rooted roms: http://forum.xda-developers.com/showthread.php?t=1584427
Click to expand...
Click to collapse
Thanks, but that's the opposite of what I need. I'm currently rooted and want a stock rom back on my phone. It's the non-rooted ROM that I can't find.
I think you can't get that off of samfirware.com I think that's the site
-sent from my insanely awesome captivate glide-
how do you back up your original rom? I could make one for you if you tell me how? I would like to have a backup before I flash anything as well.
dudejb said:
how do you back up your original rom? I could make one for you if you tell me how? I would like to have a backup before I flash anything as well.
Click to expand...
Click to collapse
Follow the rooting guide in the Android developement forum, then instead of flashing the rom first and then the Recovery, flash the recovery first.
Boot into it(volume down + power button) and choose the nandroid backup.
jayjayjoker2 said:
I think you can't get that off of samfirware.com I think that's the site
-sent from my insanely awesome captivate glide-
Click to expand...
Click to collapse
I downloaded the appropriate firmware from that site, but when I apply the update in recovery mode it does the following (the green text should be yellow, but I figured you'd like to be able to read it):
Code:
[COLOR="Green"]-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...[/COLOR]
[COLOR="Red"]E:signature verification failed[/COLOR]
[COLOR="Green"]install_package = (2)
Installation aborted.[/COLOR]
This is the firmware I downloaded: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-I927&r=5#regiona
you need CWMR (clockwork mod recovery) I don't know how to do that with this phone
-sent from my insanely awesome captivate glide-
jayjayjoker2 said:
you need CWMR (clockwork mod recovery) I don't know how to do that with this phone
-sent from my insanely awesome captivate glide-
Click to expand...
Click to collapse
Or maybe you need to use Samsung kies you should be able to get it from the same site
-sent from my insanely awesome captivate glide-
jayjayjoker2 said:
Or maybe you need to use Samsung kies you should be able to get it from the same site
-sent from my insanely awesome captivate glide-
Click to expand...
Click to collapse
Tried Kies a few times. Not once has it been able to flash the device. It will download the required files, and typically it'll just stop at that point and error out. Once I saw it try to update the device, then go back to the downloading files and then just never go anywhere...
Of course, looking now in Kies, It doesn't even pull a current firmware version, it's just blank space where it should be..
If I remember correctly, FW from samfirmware are Odin flashable....
gabby131 said:
If I remember correctly, FW from samfirmware are Odin flashable....
Click to expand...
Click to collapse
I didn't even think to check that. I'll extract it now and attempt and post back with my findings.
So, flashing the stock rom from SamFirmwares worked great with Odin, no issues. I still have SuperUser installed on the device, but Titanium backup says that it can't get root privileges. My screenshot app works just fine still though, and my AT&T update failed. The download went fine, after it rebooted, the update went to "Preparing" and then "Update is failed" and it rebooted saying the update couldn't be installed at this time...
What on earth am I doing wrong?
Gizmokid2005 said:
So, flashing the stock rom from SamFirmwares worked great with Odin, no issues. I still have SuperUser installed on the device, but Titanium backup says that it can't get root privileges. My screenshot app works just fine still though, and my AT&T update failed. The download went fine, after it rebooted, the update went to "Preparing" and then "Update is failed" and it rebooted saying the update couldn't be installed at this time...
What on earth am I doing wrong?
Click to expand...
Click to collapse
I'm sorry, you mean the flash did not wipe your data? If yes you might need to restore factory settings (wipe data)...then update..
gabby131 said:
I'm sorry, you mean the flash did not wipe your data? If yes you might need to restore factory settings (wipe data)...then update..
Click to expand...
Click to collapse
Nah, I'm not worried about my data. I just want to remove root so I can update to 2.3.6, plus I don't really have much of a reason to be rooted at this point, especially with a confirmed ICS coming "soon"...
Gizmokid2005 said:
Nah, I'm not worried about my data. I just want to remove root so I can update to 2.3.6, plus I don't really have much of a reason to be rooted at this point, especially with a confirmed ICS coming "soon"...
Click to expand...
Click to collapse
i also flashed the stock firmware from samfirmware, and yes it does not wipe data, but does remove root completely....
gabby131 said:
i also flashed the stock firmware from samfirmware, and yes it does not wipe data, but does remove root completely....
Click to expand...
Click to collapse
That's what I was expecting...but Superuser is still installed, though TitaniumBackup complains about not having root privileges, my screenshot app still works, and my OTA update fails.
Gizmokid2005 said:
That's what I was expecting...but Superuser is still installed, though TitaniumBackup complains about not having root privileges, my screenshot app still works, and my OTA update fails.
Click to expand...
Click to collapse
yeah...the SU app is still there but it's functionality is obliterated. So if you are rooted and your device is needed to be serviced, just flash the non-rooted stock ROM (recommended samfirmware) and, you may need to factory reset to perform updates....hopefully this would do the trick
gabby131 said:
yeah...the SU app is still there but it's functionality is obliterated. So if you are rooted and your device is needed to be serviced, just flash the non-rooted stock ROM (recommended samfirmware) and, you may need to factory reset to perform updates....hopefully this would do the trick
Click to expand...
Click to collapse
Well, that's what I did last night, flashed the stock non-rooted ROM from samfirmware last night, I just didn't reset the device settings/data afterwards. I can try resetting the data tonight and see if I can get the OTA update though.
Do you have clock work mod installed? Can that be effecting you from getting your updates if you do?
Related
I am putting together a quick guide on how to update your Stock ROM, Rooted, custom recovery T-Mo GSIII without having to wipe your phone.
You will need:
- Kies (If your phone has not prompted you to install the OTA yet, Kies will download and attempt to install it for you) (http://org.downloadcenter.samsung.c.../20120809103126135/Kies_2.3.2.12074_13_13.exe)
- ODIN 3.7 (http://forum.xda-developers.com/attachment.php?attachmentid=1270006&stc=1&d=1345396888)
- STOCK T-Mo GSIII recovery.img (I extracted this from the stock ODIN image for T-Mo) (http://forum.xda-developers.com/attachment.php?attachmentid=1269983&stc=1&d=1345396186)
- TWRP or CWM ODIN Flash-able recovery (CWM - http://forum.xda-developers.com/attachment.php?attachmentid=1269979&stc=1&d=1345396186 , TWRP - http://forum.xda-developers.com/attachment.php?attachmentid=1269980&stc=1&d=1345396186)
- Recovery flashable SuperSU root package (http://forum.xda-developers.com/attachment.php?attachmentid=1269984&stc=1&d=1345396186)
SO, place your phone in download mode (Vol Down + Home + Power), and via ODIN, flash the "Stock-Recovery-Image(Working T-Mobile T999).tar" image. ( This is putting the stock recovery back on your phone so the update can install).
When it reboots, either select yes to allow the OTA update to install (if your phone is already aware there is an update) on your phone, OR plug you phone into your PC and allow Kies to prompt you to update your firmware. Select yes and allow the OTA to install.
Once completed, your phone is updated without having to wipe, but you have lost root and customer recovery, so.....
Again, in Download mode, Flash either of the provided ODIN flash-able custom recoveries (TWRP, or CWM) I prefer TWRP
Once that is complete, you can reboot your phone into the new recovery (Vol UP + Home + Power)
Once in recovery, flash the SuperSU.zip package and Voila, all done, Triangle away and you in cool runnings.
Let me know if I need to clarify anything here. It makes sense to me, but then again, I fumbled through it to figure it out and extract the right recoveries and set permissions etc.....
Please hit the thanks button if this helped you in any way
Hans
Nice instructions, but I'm going to wait a few days. I'm want to see if the dev that did the flash and root without tripping the flash counter will do the same for the new firmware. I'm still not too keen on custom recoveries yet even though I backed up my IMEI, so I just want to be rooted. If not, I'll use your guide.:good:
Wildchld already released it.
http://forum.xda-developers.com/showthread.php?t=1838101
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Wildchld already released it.
http://forum.xda-developers.com/showthread.php?t=1838101
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
But with Wildchild's it's a complete ROM (650-700MB), correct? Are you not wiping when you flash his?
Actually I'm not 100% that you need to do a full wipe, but I'm guessing you probably should. Depends on what's different. You can always nabdroid and give it a shot. I will later if I have time.
Anyway, I was more responding to the post above mine about stock with root than to the op. Sorry if shoulda been a little more clear on that.
Sent from my SGH-T999 using xda app-developers app
i might wait. finally got google now and google wallet working and i dont want to mess it up lol
RotaryXperiment7 said:
i might wait. finally got google now and google wallet working and i dont want to mess it up lol
Click to expand...
Click to collapse
What did you have to modify to get them working? Like I said before, I made this little method so you did not have to wipe your phone to get the OTA installed.
The only thing I could see that would cause the OTA to break wallet, or Google now would be that if you have to modify pieces in the /system/ directory that would be overwritten. The only thing I had to do after updating was re-flash my little installer for international boot image, re-remove Carrier IQ as it was added back, and revert the googlesearch.apk to the earlier backed up version (functioning unified search) with titanium. Outside of that I run a pretty tight ship as far as system modifications go outside of root and root privileged programs.
had to edit build pro for wallet
Thanks op, this worked great for me! Updated and rooted again...
Sent from my rooted T-Mo SGS3
I tried several times but couldent unroot my phone. I even tried through the root kit by mskip. I think the problem may be that I got my phone unlocked, not using an unlock code but some other method (all I know about this method is that my phone says"restricted access" for a few seconds upon restarting.)
Any suggestions on how to unroot? Also, if I unroot, will I loose the unlock?
pappuhathi said:
I tried several times but couldent unroot my phone. I even tried through the root kit by mskip. I think the problem may be that I got my phone unlocked, not using an unlock code but some other method (all I know about this method is that my phone says"restricted access" for a few seconds upon restarting.)
Any suggestions on how to unroot? Also, if I unroot, will I loose the unlock?
Click to expand...
Click to collapse
I think the best method to unroot your phone will be to ODIN it back to the stock T-Mobile image. (Overwrites EVERYTHING, probably your unlock as well).
http://forum.xda-developers.com/showthread.php?t=1737855
Above is the link to the stock image.
Apologies, in general, but I feel you may have the wrong thread if your looking to unroot your phone. That is off topic on what is being discussed here.
has anyone tried this and kept google wallet and google now working? Any troubles?
I'm wanting to update but I'm rooted withthose two apps finally up and running.
arts711 said:
has anyone tried this and kept google wallet and google now working? Any troubles?
I'm wanting to update but I'm rooted withthose two apps finally up and running.
Click to expand...
Click to collapse
I would assume the build.prop file will be overwritten. So its possible you would need to modify after updating. May not be any way around it.
If you want to test for others, make nandroid backup , upgrade and test. If it works, update us. If not, update us
cybrnook said:
I would assume the build.prop file will be overwritten. So its possible you would need to modify after updating. May not be any way around it.
If you want to test for others, make nandroid backup , upgrade and test. If it works, update us. If not, update us
Click to expand...
Click to collapse
So (in case this all doesn't work out) to restore via nandroid, just root and apply right?
cybrnook said:
I would assume the build.prop file will be overwritten. So its possible you would need to modify after updating. May not be any way around it.
If you want to test for others, make nandroid backup , upgrade and test. If it works, update us. If not, update us
Click to expand...
Click to collapse
You are correct about build.prop being overwritten.
Sent from my rooted T-Mo SGS3.
If I've helped you, be sure to use the thanks button!
arts711 said:
So (in case this all doesn't work out) to restore via nandroid, just root and apply right?
Click to expand...
Click to collapse
Well if it doesn't work (Which I think it won't), you don't need to worry about restoring root. You just need to flash a custom recovery to revert your nandroid backup. Your root and customization will come back with that.
But with some of the added features that come with the update, I would say don't look back. Upgrade to the latest, then reapply your customization to get wallet and all working again.
IF you have to revert your nandroid back, make sure to do a factory wipe before you revert to your backup.
thanks! i'll give it a shot this weekend once i get more time.
I've used two different versions of Odin and two different T-Mobile stock recoveries (other one is here), and I can't get stock recovery to replace CWM on my GS3. Odin reports that the flash is successful, but when it reboots, ROM Manager still shows me as having latest CWM Touch, and the T-Mo update fails. I'm attempting the update via Kies right now, but I anticipate failure due to CWM still being installed as recovery.
-- I have Cerberus anti-theft installed, but I don't see anything about protecting recovery.
-- I have Busybox installed, but that shouldn't affect recovery.
Any ideas?
EDIT: Interestingly enough, where the OTA update failed, the Kies update went smooth as silk. Now to re-root and remove bloatware!
RaymondPJR said:
Nice instructions, but I'm going to wait a few days. I'm want to see if the dev that did the flash and root without tripping the flash counter will do the same for the new firmware. I'm still not too keen on custom recoveries yet even though I backed up my IMEI, so I just want to be rooted. If not, I'll use your guide.:good:
Click to expand...
Click to collapse
Are you referring to MrRobinson's rooting method? I'm waiting for it too.
Sent from my SGH-T999 using XDA Premium App
Im unable to update. I used Odin to flash the stock recovery, then downloaded the update via settings-> about device-> software update. Installing reboots the phone but then fails and reverts to current state. I can't update through kies also bc it just says "connecting", no errors. I tried uninstalling/reinstalling drivers but kies never completes connecting. Any help?
Sent from my SGH-T999 using xda app-developers app
EDIT: I uninstalled all my samsung drivers and Kies from "Programs and Features" in win7, deleted Samsung folders from HKEY_LOCAL_MACHINE and HKEY_CURRENT_USER. Reinstalled Kies and connected my phone to install the drivers. Kies was stuck in the connecting loop still, so I unmounted my sd card, turned on USB debugging and Kies finally connected and asked to upgrade. Upgrading at this moment.
I've been a long time lurker, first time post.
I have been running the official AT&T ICS release I927UCLH2, and was notified of an update for my phone from Device Management. I am now updated to I927UCLJ3 baseband. To my surprise, my keyboard backlight is now working. So far, everything looks good. There is no sign of this update on the Samsung ICS page. Maybe AT&T is just going to push it out and forgo Kies altogether? Who knows?
GrepACE said:
I've been a long time lurker, first time post.
I have been running the official AT&T ICS release I927UCLH2, and was notified of an update for my phone from Device Management. I am now updated to I927UCLJ3 baseband. To my surprise, my keyboard backlight is now working. So far, everything looks good. There is no sign of this update on the Samsung ICS page. Maybe AT&T is just going to push it out and forgo Kies altogether? Who knows?
Click to expand...
Click to collapse
I get notified too; however because I have CWM installed, it interrupts the installation and I can't install the update.
Any thoughts on what to do to get it installed?
PacoL250 said:
I get notified too; however because I have CWM installed, it interrupts the installation and I can't install the update.
Any thoughts on what to do to get it installed?
Click to expand...
Click to collapse
Seconded here. Do we have to remove CWMR in order to update from the new OTA update?
I just got a software push from AT&T for my Captivate Glide. After the restart, the keyboard lights now work! About phone says: Android v. 4.0.4. Baseband v. I927ULCLJ3. Build number IMM76D. I'll see if other things have been fixed like, ringtones that stop working and clock being x time slow. Both of which required a system restart
Gizmokid2005 said:
Seconded here. Do we have to remove CWMR in order to update from the new OTA update?
Click to expand...
Click to collapse
I reloaded the stock recovery from my LH2 install and tried the OTA update. It downloads the update but fails to install with an "Update Failed" after the reboot.
I never rooted my phone only installed CWM for the Keyboard fix and to backup with CWM. Wish I had never installed CWM now.
Just got off the phone with AT&T myself, the rep said it should be available on Kies, they want me to try the new firmware before they'll continue warranty procedure on my wife's glide.
Edit: Well it's not, but it should be soon I guess.
Second Edit: On phone with samsung, they say the update is still "on hold" on his system. At&t told me to call them if I needed help with the firmware update.
Thanks for the info. Kies kept crashing on me so could not try it and OTA says I need to way 24hrs to try again.
Will try Kies on a second computer.
Is there any way to reset the 24hour AT&T update time without erasing the data partition?
PacoL250 said:
I get notified too; however because I have CWM installed, it interrupts the installation and I can't install the update.
Any thoughts on what to do to get it installed?
Click to expand...
Click to collapse
Gizmokid2005 said:
Is there any way to reset the 24hour AT&T update time without erasing the data partition?
Click to expand...
Click to collapse
I was able to flash back to the 4.0.4 default ROM from samfirmware and then disable automatic time update and move my day ahead one.
Official update get!
Gizmokid2005 said:
I was able to flash back to the 4.0.4 default ROM from samfirmware and then disable automatic time update and move my day ahead one.
Official update get!
Click to expand...
Click to collapse
I might have to try something similar since Kies nows says that "You device does not support upgrading via Kies". Since I did not root my phone it must either not be happy with the flashes I have done to recovery even though I have flashed back to stock recovery or the Keyboard fix I did.
This blows.
does anyone know if i flash with a stock AT&T from sam firmware on a Rogers i927(r) will I be able to update to the new AT&T version on Kies ?
VideoRoy said:
I might have to try something similar since Kies nows says that "You device does not support upgrading via Kies". Since I did not root my phone it must either not be happy with the flashes I have done to recovery even though I have flashed back to stock recovery or the Keyboard fix I did.
This blows.
Click to expand...
Click to collapse
Success!!
Here are my steps:
1. Restore a backup I made with CWMR before when I first installed it before making any mods.
2. Reinstall stock Recovery before doing anything else.
3. Get OTA update even though less than 24 hours since I restored a previous point in time.
Doing the stock ROM was my second choice but since I had a backup at least most of my apps and settings were recovered.
Good luck!
2.3.6 phone says no OTA update. I'll try Kies later.
Sent from my SAMSUNG-SGH-I927 using xda app-developers app
is there someone who would upload it somehow, so I could flash it via ODIN, or something? I cannot update OTA, cause I live outside the US and at&t doesn't reach this destination. . .
Can somwone post the stock LH2 recovery please?
Sent from my SGH-I927 using xda app-developers app
SamMobile download link
This ROM version is downloadable from SamMobile Firmware Page:
link
Downloading is in progress.
You can flash this with Odin.
Is this the same as before with Samsung Touchwiz for the homescreen ?
yohan4ws said:
Is this the same as before with Samsung Touchwiz for the homescreen ?
Click to expand...
Click to collapse
Yes it is essentially the same, but all the things that were wrong are supposedly fixed
Sent from my SGH-I927 using xda premium
How do I root this ?? I have CWM installed on it but am not sure where to get a CWM zip to install SU...
I found an odin flashable I927UCLH2.md5 and used it, and when into settings, about phone, software update, and it gave me an update and I'm downloading it right now.
The phone is now at I927UCLJ3. So AT&T can OTA push it instead of trying to force the phone to work with kies
I'm trying to update to 4.1.2 and I'm getting "apply_patch_check("system/lib/libwebrtc_audio_preprocessing.so" as not being the original file.
I have no idea what changed that or how I can return it to normal. Any ideas?
Not enough information.
Was your phone completely stock and unaltered before you tried going to 4.1.2? What method are you using to get to 4.1.2?
garyd9 said:
Not enough information.
Was your phone completely stock and unaltered before you tried going to 4.1.2? What method are you using to get to 4.1.2?
Click to expand...
Click to collapse
I was on stock, then used CF-AutoRoot. Pretty much nothing besides that. According to other threads, if I used voodoo OTA and just unfreeze the AT&T apps it should work, it has for them.
Would this be due to some other root app?
OmegaNemesis28 said:
I was on stock, then used CF-AutoRoot. Pretty much nothing besides that. According to other threads, if I used voodoo OTA and just unfreeze the AT&T apps it should work, it has for them.
Would this be due to some other root app?
Click to expand...
Click to collapse
Okay.. so you were NOT completely stock. You also didn't mention what method you used for the update. Was it pushed to you over the air, or did you download it and copy it to your phone?
If you are following instructions from other threads on the update, then you might consider posting this question on one of those other threads.
I can tell you what *I* did, but I won't support that: I used ODIN to get my phone 100% back to stock (ODIN to replace the stock firmware/kernel/recovery, factory reset to erase the phone) and then installed the update via external SD. After the update was installed, I used ODIN to replace recovery, and then used that recovery to re-root and restore my backups.
Take care
Gary
garyd9 said:
Okay.. so you were NOT completely stock. You also didn't mention what method you used for the update. Was it pushed to you over the air, or did you download it and copy it to your phone?
If you are following instructions from other threads on the update, then you might consider posting this question on one of those other threads.
I can tell you what *I* did, but I won't support that: I used ODIN to get my phone 100% back to stock (ODIN to replace the stock firmware/kernel/recovery, factory reset to erase the phone) and then installed the update via external SD. After the update was installed, I used ODIN to replace recovery, and then used that recovery to re-root and restore my backups.
Take care
Gary
Click to expand...
Click to collapse
Sorry.
And no, I guess not completely stock. Just CF-AutoRoot.
I tried both OTA update and copying the update to my /cache and using ODIN. Where is where I was getting the error.
If I flash back to stock and don't factory reset/erase my phone, would this still fix any modded files like audio_preprocessing in my /system/? Flashing back to a stock ROM won't erase my apps/settings correct? I'm still pretty new to this.
What backup method did you use? ADB nandroid or something like Titanium?
OmegaNemesis28 said:
I tried both OTA update and copying the update to my /cache and using ODIN. Where is where I was getting the error.
Click to expand...
Click to collapse
That statement is confusing. You got the error trying the OTA or when updating via a manual copy to /cache?
OmegaNemesis28 said:
If I flash back to stock and don't factory reset/erase my phone, would this still fix any modded files like audio_preprocessing in my /system/?
Click to expand...
Click to collapse
If you flash back to stock via ODIN, it should completely rewrite everything in /system to revert it back to factory (as well as unroot your device.)
OmegaNemesis28 said:
Flashing back to a stock ROM won't erase my apps/settings correct? I'm still pretty new to this.
Click to expand...
Click to collapse
It shouldn't, but that doesn't mean it won't. That's why I'm a big fan of backing things up.
OmegaNemesis28 said:
What backup method did you use? ADB nandroid or something like Titanium?
Click to expand...
Click to collapse
I have an external memory card and use TWRP (replacement recovery) to backup. I ALSO backup with titanium backup pro to the external sdcard.
Gary
I decided to try cyanogenmod on my SGH-I747 but have had so many issues I would be happy at this point if I could just get a working phone again.
I started with a 4.3 OTA-updated phone. I rooted the phone, then tried to install the latest 10.2 ROM. I also tried 10.1. I used CWM: I would have preferred the latest version but the best I could find that was not an .img file (I used Odin) was in the 5.x range. In both cases I hit what I believe is a bootloader error ("assert failed: ... Status 7"). At this point the phone is wiped with no recourse. I attempted to install the stock boot image for the I747, but after doing so the phone will no longer boot.
EDIT: I am able to get to downloading mode. I am afraid to use it to install stock firmware b/c of a post I found here claiming that downgrading from 4.3 OTA (e.g., to 4.1) will brick the phone.
tn6 said:
I decided to try cyanogenmod on my SGH-I747 but have had so many issues I would be happy at this point if I could just get a working phone again.
I started with a 4.3 OTA-updated phone. I rooted the phone, then tried to install the latest 10.2 ROM. I also tried 10.1. I used CWM: I would have preferred the latest version but the best I could find that was not an .img file (I used Odin) was in the 5.x range. In both cases I hit what I believe is a bootloader error ("assert failed: ... Status 7"). At this point the phone is wiped with no recourse. I attempted to install the stock boot image for the I747, but after doing so the phone will no longer boot.
EDIT: I am able to get to downloading mode. I am afraid to use it to install stock firmware b/c of a post I found here claiming that downgrading from 4.3 OTA (e.g., to 4.1) will brick the phone.
Click to expand...
Click to collapse
i actually had the same problem earlier today. what i did was use odin to install clockworkmod recovery. after it reboots, hold VOLUME UP and HOME at the same time. if you have a micro sd handy, download any of the two updates here http://forum.xda-developers.com/showthread.php?t=2498233 place them on you sd card and in recovery format cache and factory reset/data. then highlight "install zip from sd card" or something that sounds relevant. select the zip you placed on your sd card earlier and there.
Worked, I think
MrHaPpY66 said:
i actually had the same problem earlier today. what i did was use odin to install clockworkmod recovery. after it reboots, hold VOLUME UP and HOME at the same time. if you have a micro sd handy, download any of the two updates here http://forum.xda-developers.com/showthread.php?t=2498233 place them on you sd card and in recovery format cache and factory reset/data. then highlight "install zip from sd card" or something that sounds relevant. select the zip you placed on your sd card earlier and there.
Click to expand...
Click to collapse
Thank you. The phone now boots to a white screen with an AT&T symbol. How can I install either a stock or custom ROM without ruining everything again?
tn6 said:
Thank you. The phone now boots to a white screen with an AT&T symbol. How can I install either a stock or custom ROM without ruining everything again?
Click to expand...
Click to collapse
i think this should be a help http://forum.xda-developers.com/showthread.php?t=2539313
No luck
MrHaPpY66 said:
i think this should be a help http://forum.xda-developers.com/showthread.php?t=2539313
Click to expand...
Click to collapse
That appears to be the standard tutorial for rooting/flashing. I did it anyway, even though didn't the file you had me install before already root the phone? In any event, I ran CF-root and then I attempted to install CM 10.2 and it failed: "failed to verify whole-file signature." I believe that was the first error I hit in the beginning of this exercise. Additionally, now I get an error on the welcome screen that says "Unfortunately, SuperSU has stopped."
tn6 said:
That appears to be the standard tutorial for rooting/flashing. I did it anyway, even though didn't the file you had me install before already root the phone? In any event, I ran CF-root and then I attempted to install CM 10.2 and it failed: "failed to verify whole-file signature." I believe that was the first error I hit in the beginning of this exercise. Additionally, now I get an error on the welcome screen that says "Unfortunately, SuperSU has stopped."
Click to expand...
Click to collapse
for the supersu, you probably need to go update it on the market or disable KNOX
assert failed... getprop("ro.bootloader")
MrHaPpY66 said:
for the supersu, you probably need to go update it on the market or disable KNOX
Click to expand...
Click to collapse
Thanks for the suggestion. I went back to the no-KNOX file you pointed out earlier. I assume that is the same type of file as the CF-Root so I assume I don't need to install CF-root anymore after installing the no-KNOX file. So now I follow the tutorial from your second response minus the root step. I no longer get the SuperSU error. However, I still can't load a ROM. I get the same "assert failed... getprop("ro.bootloader... Status 7" that I mentioned in my first post. When I googled this in the first round, I saw several posts saying it means I had a bad bootloader. That is when I tried to flash the stock bootloader, which nearly hardbricked the phone. Do the two files you initially posted include a bootloader file?
tn6 said:
Thanks for the suggestion. I went back to the no-KNOX file you pointed out earlier. I assume that is the same type of file as the CF-Root so I assume I don't need to install CF-root anymore after installing the no-KNOX file. So now I follow the tutorial from your second response minus the root step. I no longer get the SuperSU error. However, I still can't load a ROM. I get the same "assert failed... getprop("ro.bootloader... Status 7" that I mentioned in my first post. When I googled this in the first round, I saw several posts saying it means I had a bad bootloader. That is when I tried to flash the stock bootloader, which nearly hardbricked the phone. Do the two files you initially posted include a bootloader file?
Click to expand...
Click to collapse
i think they contained the mj2 bootloader and modem. hmm i've been doing a little snooping around and i found this. http://forum.xda-developers.com/showthread.php?t=2540998 the thing is i still don't understand how to go from leaked (mj2) to the official release (mjb) maybe updating to this will help
MrHaPpY66 said:
i think they contained the mj2 bootloader and modem. hmm i've been doing a little snooping around and i found this. http://forum.xda-developers.com/showthread.php?t=2540998 the thing is i still don't understand how to go from leaked (mj2) to the official release (mjb) maybe updating to this will help
Click to expand...
Click to collapse
I'm worried about switching bootloaders. This post seems to indicate that doing so after I installed 4.3 OTA will brick the phone. Does anyone know if that is true?
http://forum.xda-developers.com/showthread.php?t=2321310
tn6 said:
I'm worried about switching bootloaders. This post seems to indicate that doing so after I installed 4.3 OTA will brick the phone. Does anyone know if that is true?
http://forum.xda-developers.com/showthread.php?t=2321310
Click to expand...
Click to collapse
ohh ho ho it's true alright. the new 4.3 bootloader, i'm guessing it is mjb, doesn't allow any downgrades. Downgrades of any kind will absolutely give you a nice, good brick. anyways do you understand how to go from 4.3 leaked to 4.3 official?
MrHaPpY66 said:
ohh ho ho it's true alright. the new 4.3 bootloader, i'm guessing it is mjb, doesn't allow any downgrades. Downgrades of any kind will absolutely give you a nice, good brick. anyways do you understand how to go from 4.3 leaked to 4.3 official?
Click to expand...
Click to collapse
No idea. I went ahead and tried to install the I747UCDLK3_aio.tar.md5, which I hoped was a 4.3 bootloader (don't know how you are supposed to tell). The error I got was this was another failure--this time saying the package was for d2att and this is a d2spr. My phone is definitely not a sprint phone. Some posts say I have to update the build.prop file, but I don't know how I can do that before a ROM is even installed.
resolved
tn6 said:
No idea. I went ahead and tried to install the I747UCDLK3_aio.tar.md5, which I hoped was a 4.3 bootloader (don't know how you are supposed to tell). The error I got was this was another failure--this time saying the package was for d2att and this is a d2spr. My phone is definitely not a sprint phone. Some posts say I have to update the build.prop file, but I don't know how I can do that before a ROM is even installed.
Click to expand...
Click to collapse
I realized that many of the errors I was getting seemed to be tied to cyanogenmod or stock. So I downloaded Hyperdrive and it installed with zero hiccups or errors. I have a working phone again.
Thank you for your helpful insights.
tn6 said:
I realized that many of the errors I was getting seemed to be tied to cyanogenmod or stock. So I downloaded Hyperdrive and it installed with zero hiccups or errors. I have a working phone again.
Thank you for your helpful insights.
Click to expand...
Click to collapse
you're welcome and i glad i was a help to you. anyways where'd you get hyperdrive? i've been trying to get my phone back to official stock and off the leaked one.
MrHaPpY66 said:
you're welcome and i glad i was a help to you. anyways where'd you get hyperdrive? i've been trying to get my phone back to official stock and off the leaked one.
Click to expand...
Click to collapse
I downloaded hyperdrive from the official spot: http://forum.xda-developers.com/showthread.php?t=2106830. I wouldn't have minded going back to stock, but clearly that was not going to happen any time soon.
tn6 said:
I downloaded hyperdrive from the official spot: http://forum.xda-developers.com/showthread.php?t=2106830. I wouldn't have minded going back to stock, but clearly that was not going to happen any time soon.
Click to expand...
Click to collapse
so how's the rom so far? probably going to get it myself.
MrHaPpY66 said:
so how's the rom so far? probably going to get it myself.
Click to expand...
Click to collapse
Zero issues. Worked great all day with no problems. Plus I am now able to tether and use the mobile hotspot, features that I couldn't get to work on the stock rom even with foxfi or similar apps.
tn6 said:
Zero issues. Worked great all day with no problems. Plus I am now able to tether and use the mobile hotspot, features that I couldn't get to work on the stock rom even with foxfi or similar apps.
Click to expand...
Click to collapse
so i see it's a lot better than stock. i'll install it as soon as i can and thanks for the link to the rom
Here is the ota file I just pulled from my s3. It's a cfg file though, and the recommended way to install is via adb sideload.
Stock users please test it. People who are rooted, use xposed, TiBu to freeze bloat, tell me how to update without a factory reset. I have already tried unrooting and using stock recovery, I am now unfreezing all bloat and uninstall xposed to see if it works.
https://mega.co.nz/#!W0JHQKAK!pA52fCAkUxTMia9A21KL1TrR8bmJT10jhNlBvn5j-Mk
Devs, is there a way to modify the update script so it doesn't check for modified system status? I'm worried I can't update because of tripped knox and if so I'm screwed
bkong said:
Here is the ota file I just pulled from my s3. It's a cfg file though, and the recommended way to install is via adb sideload.
Stock users please test it. People who are rooted, use xposed, TiBu to freeze bloat, tell me how to update without a factory reset. I have already tried unrooting and using stock recovery, I am now unfreezing all bloat and uninstall xposed to see if it works.
https://mega.co.nz/#!PJ40jDCY!I2A0Di...381MaXx3_0dl8I
Click to expand...
Click to collapse
Can you please PM @DocHoliday77 to help him build the Stock ROM for us? He does not have the AT&T Device, but can surely help us in building the ROM. Greatness of him!!
He may ask for some other files for building AT&T ROM for us. If he can build the ROM for us, then we dont have to take the pains of testing the CFG file!!
Thanks man!!
Thank you for sharing this. We'll be hard at work on this now
Sent from my SGH-I747 using XDA Premium 4 mobile app
bkong said:
Here is the ota file I just pulled from my s3. It's a cfg file though, and the recommended way to install is via adb sideload.
Stock users please test it. People who are rooted, use xposed, TiBu to freeze bloat, tell me how to update without a factory reset. I have already tried unrooting and using stock recovery, I am now unfreezing all bloat and uninstall xposed to see if it works.
https://mega.co.nz/#!PJ40jDCY!I2A0Di...381MaXx3_0dl8I
Devs, is there a way to modify the update script so it doesn't check for modified system status? I'm worried I can't update because of tripped knox and if so I'm screwed
Click to expand...
Click to collapse
Anybody have this hosted on a different mirror? The link asks me for a decryption key.
stoobie-doo said:
Anybody have this hosted on a different mirror? The link asks me for a decryption key.
Click to expand...
Click to collapse
Wait until later tonight or tomorrow when enewman17 or docholiday release a flashable
Sent from my SGH-I747 using XDA Premium 4 mobile app
@bkong
Link is bad, clicking it links to a url with "..." in the middle
CNexus said:
@bkong
Link is bad, clicking it links to a url with "..." in the middle
Click to expand...
Click to collapse
reuploaded it with new link, does it work now?
I'm also waiting for a flashable zip because I can't get adb working and ota fails every damn time.
bkong said:
reuploaded it with new link, does it work now?
I'm also waiting for a flashable zip because I can't get adb working and ota fails every damn time.
Click to expand...
Click to collapse
you can't just flash an update.zip through stock recovery?
Appears to be working! I've got someone who is going to try to get me everything I need to build a rom from the AT&T release, so if all goes well I should have it up this afternoon! :fingers-crossed:
Success!
used the odin flashable 4.3 file from http://forum.xda-developers.com/showthread.php?t=2722660 , went back to stock 4.3 and then used the OTA provided by the OP to get to 4.4.2
edit: please wait for the devs to work their magic to get fully working and easily flashable roms
Jakeuten said:
you can't just flash an update.zip through stock recovery?
Click to expand...
Click to collapse
I believe that wipes all your data so I wanted to avoid that, and it might not work according to some peoples experience,
DocHoliday77 said:
Appears to be working! I've got someone who is going to try to get me everything I need to build a rom from the AT&T release, so if all goes well I should have it up this afternoon! :fingers-crossed:
Click to expand...
Click to collapse
Awesome, will this be an odin flashable tar that will keep your data? I have been struggling for the past few hours trying to update without losing all my data. I flashed this rom [http://forum.xda-developers.com/showthread.php?t=2498233] that is stock and includes knox but Adb doesn't work for me and the at&t software update says its up to date, which its not, so I think the rom might have a problem, and I'm trying to figure out how to reinstall twrp so I can restore my backup but knox is blocking me. Hopefully I can just odin your rom and towelroot and be done with it.
DocHoliday77 said:
Appears to be working! I've got someone who is going to try to get me everything I need to build a rom from the AT&T release, so if all goes well I should have it up this afternoon! :fingers-crossed:
Click to expand...
Click to collapse
could you make an update.zip for users with stock recovery as well?
bkong said:
I believe that wipes all your data so I wanted to avoid that, and it might not work according to some peoples experience,
Click to expand...
Click to collapse
OTA shouldn't wipe any of your data. The way it works is it patches the existing files on your device with any changes to bring it up to date. Shouldn't touch any user data at all.
Awesome, will this be an odin flashable tar that will keep your data? I have been struggling for the past few hours trying to update without losing all my data. I flashed this rom [http://forum.xda-developers.com/showthread.php?t=2498233] that is stock and includes knox but Adb doesn't work for me and the at&t software update says its up to date, which its not, so I think the rom might have a problem, and I'm trying to figure out how to reinstall twrp so I can restore my backup but knox is blocking me. Hopefully I can just odin your rom and towelroot and be done with it.
Click to expand...
Click to collapse
It'll be recovery flashable. Im not sure yet if Ill be trying to create an Odin flashable one. Will need to have someone pull the system.img slightly differently if I do. (Would need to Odin flash 4.3, flash TWRP, boot straight to recovery and flash the OTA, then while still in recovery dump the partition.) Even then, no guarantee it would work quite right. These things can be a little finicky.
How is Knox blocking TWRP though? You should be able to flash that via Odin. Since you updated using the OTA though, every time you reboot, it will rewrite the stock recovery. So when you flash TWRP via Odin, uncheck the Auto Reboot box, then after the flash is successful, pull the battery. Then put it back in and boot straight to recovery and flash your rom.
Jakeuten said:
could you make an update.zip for users with stock recovery as well?
Click to expand...
Click to collapse
I will try. No guarantees though. Its been a long time since I've messed with OTA's, so I'm not completely sure I will remember exactly what to do with it. I should be able to do it though. Just not making promises!
bkong said:
I believe that wipes all your data so I wanted to avoid that, and it might not work according to some peoples experience,
Awesome, will this be an odin flashable tar that will keep your data? I have been struggling for the past few hours trying to update without losing all my data. I flashed this rom [http://forum.xda-developers.com/showthread.php?t=2498233] that is stock and includes knox but Adb doesn't work for me and the at&t software update says its up to date, which its not, so I think the rom might have a problem, and I'm trying to figure out how to reinstall twrp so I can restore my backup but knox is blocking me. Hopefully I can just odin your rom and towelroot and be done with it.
Click to expand...
Click to collapse
Not sure whether you can use Mobile Odin Pro to do that. Extracting the file from the OTA.zip and renaming it from 2400258.cfg to 2400258.zip makes it recognized in MOP, and the options are there to avoid the wipe, but I know earlier OTAs like that did wipe.
Note - I have only gone so far as loading it into MOP; waiting to see if someone more foolhardy than me is willing to actually do it.
stoobie-doo said:
Not sure whether you can use Mobile Odin Pro to do that. Extracting the file from the OTA.zip and renaming it from 2400258.cfg to 2400258.zip makes it recognized in MOP, and the options are there to avoid the wipe, but I know earlier OTAs like that did wipe.
Note - I have only gone so far as loading it into MOP; waiting to see if someone more foolhardy than me is willing to actually do it.
Click to expand...
Click to collapse
Tempted to try it (flash through stock recovery) but not my phone lol
Unless MO is written to specifically handle it, it will probably fail. (Im not sure if it is or isn't)
Sorry if I was misinformed about it wiping data. On TMobile neither OTA's or flashing in Odin ever wipes data. Afaik, Odin will only wipe data if there is a data.img included in the .tar file. Our OTA's have never touched anything but dalvik on the data partition either from what I remember.
DocHoliday77 said:
Unless MO is written to specifically handle it, it will probably fail. (Im not sure if it is or isn't)
Sorry if I was misinformed about it wiping data. On TMobile neither OTA's or flashing in Odin ever wipes data. Afaik, Odin will only wipe data if there is a data.img included in the .tar file. Our OTA's have never touched anything but dalvik on the data partition either from what I remember.
Click to expand...
Click to collapse
Let me be more precise; the technique I was talking about is found at http://forum.xda-developers.com/showthread.php?t=1767827 and applies the OTA in a way that wipes. Not sure whether MO would do the same or not; I haven't played with it since the upgrade to 4.3 last year and my memory is hazy.
Just tried and ADB sideload of this file to my S3. After renaming the .cfg file to .zip.
I get an "assert failed" on "getprop("ro.product.device") == "d2att""
Any suggestions? I'm wondering if the phone is reporting something other than d2att?
So no one tested this via stock recovery? Need to know if the update can be done through stock recovery.
stoobie-doo said:
Let me be more precise; the technique I was talking about is found at http://forum.xda-developers.com/showthread.php?t=1767827 and applies the OTA in a way that wipes. Not sure whether MO would do the same or not; I haven't played with it since the upgrade to 4.3 last year and my memory is hazy.
Click to expand...
Click to collapse
Just tried this method.
I got the assert failure again, and it happily wiped my internal SD but didn't install the OTA.
Good thing I'm not using this device for anything critical, I'd be rather pissed off.