OK, I Know I did a very stupid thing but I flashed the Nordik Version of the Official ICS Rom for Arc S on My Arc.
Now The problem is when it was flashing, the flash stopped at a certain point. Here is the message
14/002/2012 20:02:24 - INFO - Flashing userdata.sin
14/002/2012 20:02:24 - ERROR - Error flashing. Aborted
14/002/2012 20:02:24 - INFO - Now unplug the device and power it on
Click to expand...
Click to collapse
But then After I Rebooted, It showed the sony logo for a second and then some logo of the mobile with a caution symbol (Yellow Exclamatory Mark). And thats it, after a couple of seconds, it switched off.
I repeated the process and the same thing.
Scared Then I Flashed a Doom Kernel and did a factory reset. While the factory reset, it said that it could not open \data :|
i tried formating data many times but it could not mount it saying different file system.
So I flashed a matching Custom ROM and It does not work, Nether is any app installing nor any file getting saved
Please Help!
And Anyway to solve the /userdata filesystem problem?
If flashtool stopped then try re-downloading the file in case it was corrupt, and try to re-flash. If that's not successful download a stock 2.3.4. ftf and flash that.
FTF Wasnt corrupt :\
Now I Have tried flashing the 2.3.4 Android aswell BB 48
A Very old one which I downloaded around december time to root my Arc.
That doesnt even go past the SE Logo
The Custom ROM atleast booted.
My Guess is that the userdata partition has a different filesystem than the one it can read :\
Think it's to do with flashtool being unable to handle ICS data parameters. Binary has posted some type of workaround till he updates it.
Ok, Will check them out.
Thanks!
In his post?
think so, it's mentioned in the thread.
Nope
It stops while flashing the system.sin file
Anyway to solve the /userdata filesystem problem?
Not yet, apparently. I use cm9 so don't really know, though I think there's a cwm flashable ics stock.
sinkster©
No Use of that
Try connecting in fastboot, and use the erase or format commands, e.g. 'fastboot erase boot' or erase system, in case it's a system partition issue
Then try a kernel and rom.
sinkster©
OK, Apparently the problem was that I was using an old version of the flashtool (0.5.8)
I downloaded the latest 0.6.9.1 and followed the 3 step flasshing process
Enjoying ICS on my LT15i
SS4Serebii said:
OK, Apparently the problem was that I was using an old version of the flashtool (0.5.8)
I downloaded the latest 0.6.9.1 and followed the 3 step flasshing process
Enjoying ICS on my LT15i
Click to expand...
Click to collapse
Hi ,
I have ARC S with unlocked boot loader.
I can install any kernel on the phone via fast boot or by using the flashtool latest version.Right now I have installe dthe lupus kernel V16 and I can boot to the CWM and I hae installed the latest version of Ultimate Xperia HD by jader , I can install and after installation if i reboot the phone is stuck at booting screen only. I have tried various kernels and various roms all are giving the same issue.
I can install the ROM but cannot boot it gets stuck at booting screen. I have formatted the partition's via fastboot and by using the CWM still the issue persists.Please help.
Flash the stock firmware ftf file, then try again, or flash a different kernel.
Sent from my Xperia X10 using xda premium
I have tried the same.and it stops and doesn't flash the Rom loading Kernel is very easy, can install Rom too but after this
When I boot it just sits at boot screen
Sent from my iris405 using Tapatalk 2
santsplen said:
I have tried the same.and it stops and doesn't flash the Rom loading Kernel is very easy, can install Rom too but after this
When I boot it just sits at boot screen
Sent from my iris405 using Tapatalk 2
Click to expand...
Click to collapse
Hi guys , Please help me as I have tried multiple kernels and roma all of them exhibit same issue,
Booting to CWM using the CWM inbuilt into the kernel takes a long time as well as once a rom is installed via CWM it completes installation and then comes to the boot screen and it sits at the boooting screena and does not get past it.
How are we gonna help if you don't state ROM and kernel and what exactly you did.
Sent from my Xperia X10 using xda premium
I have installed lupus v 16 kernel , with xperia ultimate hd rom and xperia blue rom both are having same issue.I can boot to cwm and install the rom but after you give reboot after the rom installation it just sits at the boot animation screen .
One thing I noticed is that booting to cwm takes almost a minute after turning on the phone , is this normal ?.
Sent from my iris405 using Tapatalk 2
Did you wipe everything before instaling, and have you tried reflashing th kernel
Sent from my X10i using xda premium
I have wiped system and data ,cache,dalvik cache and have even formatted the partitions from fastboot using fastboot commands ,have even tried rush kernel and u am facing same issue .Please help.
Sent from my iris405 using Tapatalk 2
Related
I unlocked my bootloader via omnius, installed doomkernel and rebooted with no problem, then from recovery did a wipe cache/dalvik and then installed Arconium 8.1
Now i cant get passed the doomkernel startup image, it just freezes there and i have to remove the battery. I also cant access recovery.
Im on baseband 64, had Team Stock Rom installed, and used CWM Auto-Installer 5.0.2.7-nAa-r2. (these were installed while bootloader was locked)
Do you know how to use fast boot? If so I would suggest you use the kernel provided with arconium 8.1 .
Open a cmd window easiest way is to browse to the location where fastoot is located, paste the kernel usually called boot.img in the same folder hold the shift key on your keyboard and press right click and select open command window here. Shut down your phone and then while holding the menu key on your phone plug in the USB cable. Then in the command prompt type fastboot flash boot boot.img
It should show that the kernel was flashed and you can try and start your phone again.
Good luck
Just did that and still it freezes on doomkernel start up image... im desperate
I think the key to the problem is that I had a CWM recovery installed only for stock fw, and I installed arconium on it.
yeah "CWM Auto-Installer 5.0.2.7-nAa-r2" it is!! stock only..
I know that, but what I need is a solution. Im downloading a prerooted .62 fw, is there any other way to solve this without flashing?
Doom kernel should come pre loaded with cwm, but make sure the one ur using is arconium 8.1 because If your using the wrong kernel your phone will not boot.
Just clarify a boot loop is usually a loop of what ever logos repeating over and over so for example if I was having a boot loop in cm9 I would see the freexperia logo than the cm9 logo then freexperia logo again.
http://forum.xda-developers.com/showthread.php?t=1325640
LuckyStriker33 said:
I unlocked my bootloader via omnius, installed doomkernel and rebooted with no problem, then from recovery did a wipe cache/dalvik and then installed Arconium 8.1
Now i cant get passed the doomkernel startup image, it just freezes there and i have to remove the battery. I also cant access recovery.
Im on baseband 64, had Team Stock Rom installed, and used CWM Auto-Installer 5.0.2.7-nAa-r2. (these were installed while bootloader was locked)
Click to expand...
Click to collapse
I had bootloop once while installing CM7..
and i did this...
Boot into recovery mode...WIPE DALVIK CACHE...REBOOT IN RECOVERY...
Delete data/partition....del Cache...REBOOT IN RECOVERY
And then install the zip from SD card....
Lemme know if this helps...
Good day
lol... I had the same exactly the same problem when instaliing arconium 8.1.
I just couldnt find out what to do....
so I just restored a backup using CWM
Kajendran said:
lol... I had the same exactly the same problem when instaliing arconium 8.1.
I just couldnt find out what to do....
so I just restored a backup using CWM
Click to expand...
Click to collapse
The solution I quoted works for 99% of the bootloop issues...
And Kajendran,
I had given the link to download kernel.sin file in the thread started by you...Did it work???
Good Evening !
At the begining I'd like to sory for my english. as it's not my first language.
So... Yesterday i've tried to flash a new ICS XDark v0.2 rom in to my xperia play R800i.
I have unlocked a boot loader and rooted my phone aswell.
Installation went well with flashboot, after installation my phone rebooted, and when it tried to turn one it stucked on "sony erricson" screen, for few secs, turned off and on again... and again stuck at the same moment... and same thing over and over again.
Someone on forum said it looks like karnel problem... and sugest to flash it.
So i have read on internet quite a lot about flashing kernels, to try to flash it.
I've downloaded doomkarnel v03.zip, and tried to flash it with flashtool, but it didn't work cause to flash it with flashtool i need ftf file which i cant find to download, so i used a fastboot to flash it, but when i tape command in CMD it says "can not load image"
so again i have started to search on google to fix this problem but nothing worked.
I decidet to flash diffrent rom just to make my phone working again so i've downloaded cyanogen 7 as ftf. file so i could flash it with flash tool...
When i was loading file to flashtool it wanted me to connect phone with pressed "back" button, so a did it.. but after few sec flashtool said "flashing filed"... dont know why...
I dont know what to do... I am trying to fix it 12 h today... and tried 5 yesterday... Please help me, I need my phone working ;/
Maybe there is anyother way to install stock rom back again or any thing to make it works again?
Really need help.
Thank you very much,
Jake.
Did you try wipe cache, dalivk cache and factory reset from recovery
Sent from my Galaxy Nexus using xda premium
skruid said:
Did you try wipe cache, dalivk cache and factory reset from recovery
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yes, About 5 times still nothing !
anyone... ? please, i am really despret
Just do a Google search for a stock firmware and kernel pref. One in ftf.
Sent from my GBTweaked R800x using tapatalk 2
Hi.
Today I received my Xperia S and immediately started rooting it. First i unlocked my bootloader succesfully with help of sonys official tutorial.
Then I rooted my stock ICS 2.45 firmware succesfully with root witch restore binaries thingy. Then I started installing CWM and used ten thousand different tuts and finally succeeded to boot to CWM based recovery v5,5,0.4 with help of THIS TUT
Now it booted to that recovery and then tried to flash FXP205-cm-10-201-302-01-UNOFFICIAL-anzu.zip that with it from internal sd. It did say something about status 7 installation aborted. There were tutorial that said that download FXP205-cm-10-201-302-01-UNOFFICIAL-nozomi.zip but i thought that anzu.zip was newest. Was that a mistake and is there any hope that my xperia s will work ever again?:crying:
Maybe stupid, but didyou fully charged?
LB or UB?
Tried again step by step, maybe u missed something?
FlasTool is ur friend!
Sent from my LT26i using xda app-developers app
Odp: Xperia S wont boot or anything
It's sad but there might be no hope for your Phone since nozomi is the codename for Xperia S and anzu i totalny different model so you flashed wrong kernel so your Phone might be perbricked. Anyways try flashing stock Rom through flashtool. It might work. If you're not able to boot into fastboot/flashmode then your Phone is permanently dead.
Sent from my Xperia S using xda app-developers app
mracer164 said:
It's sad but there might be no hope for your Phone since nozomi is the codename for Xperia S and anzu i totalny different model so you flashed wrong kernel so your Phone might be perbricked. Anyways try flashing stock Rom through flashtool. It might work. If you're not able to boot into fastboot/flashmode then your Phone is permanently dead.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
dont be dramatic, get sony's official flashtool and flash back a stock rom, then restart from scratch.
1: download the CM you want but it must be with codename nozomi in it
2: if its cm10 get jellybean 4.1.2 gapps, if its cm9.1 get 4.0.4 gapps,
3: place the files through the stock rom back on your sd card
4: flash the boot.img located in the cm file you downloaded,start your phone in fastboot, then:fastboot flash boot boot.img
5: fastboot reboot
6: wipe cache, dalvik, factory reset and format system(optional) in cwm
7:instal cm zip in cwm
8: install correct google apps zip
9: reboot the device
10: enjoy
methode works for nearly every ROM around here
Sent from my Xperia S using xda app-developers app
Odp: Xperia S wont boot or anything
If he's not getting any leds then situation might be dramatic but if he can reach fastboot/flashmode then there is high chance to get a Phone alive.
Sent from my Xperia S using xda app-developers app
Thankyou guys I finally mamaged to flash the nozomi cm10, i think i had luck.
Again big problem. Now I am in cwm, or fastboot and flashtool (emma). if i type to cmd fastboot devices it shows my device but flashtool and adb device wont show anything. i am trying to push my rom to sd because i did forgot to but in, and already formated system in cwm. Because th pac jellybean rom tut said that i have to format it. help i have no idea what to do now.:crying:
HighVoltage_ said:
Again big problem. Now I am in cwm, or fastboot and flashtool (emma). if i type to cmd fastboot devices it shows my device but flashtool and adb device wont show anything. i am trying to push my rom to sd because i did forgot to but in, and already formated system in cwm. Because th pac jellybean rom tut said that i have to format it. help i have no idea what to do now.:crying:
Click to expand...
Click to collapse
Highvoltage,
You are making all to quick and without attention, too much mistakes for such a short notice.
You don't yet know the process, why don't you lock your Bl and try some custom roms for it? That way you can practice the method and will have almost no chance to hardbrick your phone.
You have your phone alive at this moment or not?
In each case, start from scratch, go to flashtool and go for stock rom again.
Sent from my LT26i using xda app-developers app
Hold on? So u have a pac rom zip on your sd still? If so just flash it
Sent from my Android 4.2.1 Xperia S
Yes, I managed to get it work with adb. i installed zip in cwm with sideload and I think that wasnt succesful so then pushed zip file to sdcard with adb and flashed it again. My biggest problem was finding working usb drivers. I tried about 15 different ways to install drivers but then just downloaded just some random driver and it worked
no time to explain right now because I am at work. Sry for messy text. Will update this post soon
hello there my names kyle and im new here but you can call me sangy, anyway i have joined the site to post this
i have had my play now for 6 months and i want ics and a new kernel, i heard lupus was the best one so i flashed lupus using fastboot and the correct rom. i have followed all steps correctly and the dam thing just boot loops after 1 min of booting unless i have my usb in my pc at which point the phone will stay on like it should without a single bootloop. so with a potentially bricked phone i flashed the stock firmware back v4.0.2.A.0.58 and re flashed a different kernel and rom still the same issue so i flashed back to stock again. if anyone can tell me how to solve this weird ass issue i will rate you +1 because im getting sick of having no cwm and incompatibilities with apps and i want to overclock
ps im planning on flashing doomkernel v14 hope this problem is gone but i know it will have the same issue.
my phones current state is this
xperia play r800i
stock kernel(2.6.32.9-perf) [email protected]#1
FW 4.0.2.A.0.58
baseband 64
android 2.3.4 ginger bread with root and unlocked boot loader
thats everything i know thanks for reading and helping in advance
edit: sorry if im not been precise but by boot loop i mean hot boot where the phone will run fine for 3 min then freeze and reboot on its own until i pull the battery or plug in usb in pc upon hard reset it even does this in kernel boot up
vampyregaming said:
hello there my names kyle and im new here but you can call me sangy, anyway i have joined the site to post this
i have had my play now for 6 months and i want ics and a new kernel, i heard lupus was the best one so i flashed lupus using fastboot and the correct rom. i have followed all steps correctly and the dam thing just boot loops after 1 min of booting unless i have my usb in my pc at which point the phone will stay on like it should without a single bootloop. so with a potentially bricked phone i flashed the stock firmware back v4.0.2.A.0.58 and re flashed a different kernel and rom still the same issue so i flashed back to stock again. if anyone can tell me how to solve this weird ass issue i will rate you +1 because im getting sick of having no cwm and incompatibilities with apps and i want to overclock
ps im planning on flashing doomkernel v14 hope this problem is gone but i know it will have the same issue.
my phones current state is this
xperia play r800i
stock kernel(2.6.32.9-perf) [email protected]#1
FW 4.0.2.A.0.58
baseband 64
android 2.3.4 ginger bread with root and unlocked boot loader
thats everything i know thanks for reading and helping in advance
edit: sorry if im not been precise but by boot loop i mean hot boot where the phone will run fine for 3 min then freeze and reboot on its own until i pull the battery or plug in usb in pc upon hard reset it even does this in kernel boot up
Click to expand...
Click to collapse
which lupus kernel, ics+gb v7 or lupus ics beta v12. have you tried flashing through flashtool because it always works for me and which ics rom as their are tons.
hello thanks for the quick reply
ive tryed the lupus ics+gb kernel latest version with the ics beta rom for xperia play and ive also tryed the lupus gb kernel latest version
and yes i have flash tool and all the drivers but a nice reccomendation on what to flash next based on my phones spec at the moment would be nice
also why am i the only person on the internet with this problem? ive heard of having 60+ apps on the sd to cuase hot booting but for me this is just out of the ordinare, particulary when ive whiped all the phone and flashed a new kernel.
vampyregaming said:
hello thanks for the quick reply
ive tryed the lupus ics+gb kernel latest version with the ics beta rom for xperia play and ive also tryed the lupus gb kernel latest version
and yes i have flash tool and all the drivers but a nice reccomendation on what to flash next based on my phones spec at the moment would be nice
also why am i the only person on the internet with this problem? ive heard of having 60+ apps on the sd to cuase hot booting but for me this is just out of the ordinare, particulary when ive whiped all the phone and flashed a new kernel.
Click to expand...
Click to collapse
With Lupus kernel, use R800i_4.0.2.A.0.79 firmware
will be flashing that stock firmware now over my other one then put lupus gb+ics over the stock kernel
will let you know if it goes well and fixes this
unfortunatly it did not fix it rom loads up, gets to the regular sony setup then freezes and hot boots. did this with lupus kernel ics+gb and the 4.0.A.0.79 firmware you linked me to. its either the kernel or my phone
just tryed doomkernel v14 with your FW kernel still crashes and reboots, is there something i have to do in flashtool because
every kernel ive flashed yet has the same issue.
note i can get a catlog app whilst it is plugged in then unplug it and wait for the crash and send it to you and you can see where its going wrong with the kernel and tell me what to do
thanks for reading these updates and sorry its taking this long to find and fix a big bug :good:
vampyregaming said:
unfortunatly it did not fix it rom loads up, gets to the regular sony setup then freezes and hot boots. did this with lupus kernel ics+gb and the 4.0.A.0.79 firmware you linked me to. its either the kernel or my phone
Click to expand...
Click to collapse
Did you tried any other ics/gb rom? Wipe your system/data from recovery before installing (and by installing i mean install from recovery with "install zip from sdcard")
Ps: maybe its stupid question, but is your sdcard full??? How much free space on it?
what recovery? this is an xperia play they dont have a recovery on stock kernels thats why im flashing one and no my sd card is not full
literally after i flash the kernal and boot up it will freeze and hot boot. the rom doesent factor in this. ive tryed 4 kernels so far the one that comes with cyanogen mod 9 and the 3 mentioned above
would flashtool logs be helpful if so tell me how to record them to a clipboard and you can see whats going on during the flash
vampyregaming said:
what recovery? this is an xperia play they dont have a recovery on stock kernels thats why im flashing one and no my sd card is not full
literally after i flash the kernal and boot up it will freeze and hot boot. the rom doesent factor in this. ive tryed 4 kernels so far the one that comes with cyanogen mod 9 and the 3 mentioned above
would flashtool logs be helpful if so tell me how to record them to a clipboard and you can see whats going on during the flash
Click to expand...
Click to collapse
For Lupus kernel - when powering on, keep pressing volume down for clockworkmod recovery or volume up for TWRP recovery.
Flash ROM from recovery that match kernel. Lupus ICS/GB V7 is for ics/gb roms based on stock (Sony) roms. Read in ROM's thread which kernel is recommended
With flashtool you can only flash .img files and in Xperia Play case, that is ONLY ics beta rom (but almoust all kernels come in .img format - so Flashtool is used to flash kernel). From recovery you can flash every other rom that you can find (just make sure that kernel match rom or else you'll get kernel bootloop)
ok this will be crystal clear
i can flash the kernal but even when booting the kernal and going into recovery to even flash a rom it will freeze and hot boot
meaning i did everything correctly with flashtool to do the kernel and with just the kernel installed (no rom) it still freezes and hot boots
as soon as i can stop these kernels from freezing i can flash whatever ics or gb there is in recovery
note: what are your settings for your flashtool as i might be missing a setting also the info from flashtool says at startup to disable MTP for 2011 devices, would this be my problem?
vampyregaming said:
ok this will be crystal clear
i can flash the kernal but even when booting the kernal and going into recovery to even flash a rom it will freeze and hot boot
meaning i did everything correctly with flashtool to do the kernel and with just the kernel installed (no rom) it still freezes and hot boots
as soon as i can stop these kernels from freezing i can flash whatever ics or gb there is in recovery
note: what are your settings for your flashtool as i might be missing a setting also the info from flashtool says at startup to disable MTP for 2011 devices, would this be my problem?
Click to expand...
Click to collapse
what kernel are you trying to flash? Be specific!
What rom are you trying to flash?
Disconnect phone from PC after you flashed your rom (any one, first boot must be done while disconnected)
the kernel i would like mostly is the lupus kernel
i can flash every kernel no problems, its the fact that the kernel crashes etc i can also flash the correct rom using flashtool the same thing happens
the case im trying to make is that you first install the kernel then flash your rom in recovery then the extras like wifi modules to the kernel
the kernel (dosent matter which one i try for my device ) has the hot boot issue happen to it no matter what i do before i even have a chance to install the rom(again the correct rom stock or not).
and yes i know you have to wait for boot ups on new roms and kernels, this isnt the first time i have flashed roms as i have a galaxy tab 2 running cm10 for the most part.
again thanks for the quick replys but i think this will require more technical solutions or debugging with my phone or software.
Install cwm on your phone. Search xparts on play store. Go into recovery and wipe system and wipe data and cache then turn off your phone. Open flashtool. Hold search while plugging your phone in and then flash kernel
Sent from my LT30p using XDA Premium 4 mobile app
FaiselW said:
Install cwm on your phone. Search xparts on play store. Go into recovery and wipe system and wipe data and cache then turn off your phone. Open flashtool. Hold search while plugging your phone in and then flash kernel
Sent from my LT30p using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thank you for for saying that after 1 hour, will try that now and test the kernel for 20 - 5 min
if this works tell the kernel devs to make proper instructions on this
FaiselW said:
Install cwm on your phone. Search xparts on play store. Go into recovery and wipe system and wipe data and cache then turn off your phone. Open flashtool. Hold search while plugging your phone in and then flash kernel
Sent from my LT30p using XDA Premium 4 mobile app
Click to expand...
Click to collapse
did these exact instructions but the new xparts dosent work so luckily the community had the older version that works,
followed everything buy the book installed cwm using xparts after root went into recovery, wipe data factory reset, wipe cache partition and i even wiped the dalvik cache, flashed the lupus ics+gb kernel booted into the custom lupus recovery (scrolled through the menu a minute) then as expected kernel crash followed by hot boot
any other ideas?
vampyregaming said:
did these exact instructions but the new xparts dosent work so luckily the community had the older version that works,
followed everything buy the book installed cwm using xparts after root went into recovery, wipe data factory reset, wipe cache partition and i even wiped the dalvik cache, flashed the lupus ics+gb kernel booted into the custom lupus recovery (scrolled through the menu a minute) then as expected kernel crash followed by hot boot
any other ideas?
Click to expand...
Click to collapse
Fully working steps:
-download eraser.zip in attachment, unpack it somewhere in pc
-Start flashtool, enter flash mode, hold back button on phone, connect to pc and flash .79 firmware. DO NOT BOOT INTO ROM!
-Disconnect phone and connect again in fastboot mode (hold search button while plugging it back)
-Flash Lupus ICS/Gb 480p or 720p kernel
-While still in fastboot mode, double-click file name "start.bat" from where you unpacked file in attachment.
-Disconnect phone, power on and keep pressing volume down untill you enter recovery
-Install rom and reboot
Bakisha said:
Fully working steps:
-download eraser.zip in attachment, unpack it somewhere in pc
-Start flashtool, enter flash mode, hold back button on phone, connect to pc and flash .79 firmware. DO NOT BOOT INTO ROM!
-Disconnect phone and connect again in fastboot mode (hold search button while plugging it back)
-Flash Lupus ICS/Gb 480p or 720p kernel
-While still in fastboot mode, double-click file name "start.bat" from where you unpacked file in attachment.
-Disconnect phone, power on and keep pressing volume down untill you enter recovery
-Install rom and reboot
Click to expand...
Click to collapse
will try this now hope this one works as were running out of solutions will post again in half hour
Bakisha said:
Fully working steps:
-download eraser.zip in attachment, unpack it somewhere in pc
-Start flashtool, enter flash mode, hold back button on phone, connect to pc and flash .79 firmware. DO NOT BOOT INTO ROM!
-Disconnect phone and connect again in fastboot mode (hold search button while plugging it back)
-Flash Lupus ICS/Gb 480p or 720p kernel
-While still in fastboot mode, double-click file name "start.bat" from where you unpacked file in attachment.
-Disconnect phone, power on and keep pressing volume down untill you enter recovery
-Install rom and reboot
Click to expand...
Click to collapse
followed the instructions to the word kernel still crashes in lupus recovery
vampyregaming said:
followed the instructions to the word kernel still crashes in lupus recovery
Click to expand...
Click to collapse
I don't know what you mean by "kernel still crashed in lupus recovery". In wich step you get that?
Try pressing volume up when powering on to enter twrp recovery
I hope someone can help my with this problem...
I had LuPuS v12 GB Kernel
http://forum.xda-developers.com/showthread.php?t=1849536
with Aurora Play 2.0 CRom
http://forum.xda-developers.com/showthread.php?t=2124442
Working just fine, but i decided it was time to change to a ICS based rom... So, I flashed LuPuS v7 Stock ICS/GB kernel
http://forum.xda-developers.com/showthread.php?t=2167766
Using this fastboot guide
http://forum.xda-developers.com/showthread.php?t=2054512
which, btw, was the same I used to flash LuPuS v12 ....
But when I tried to boot in recovery mode (Volume down for CWR, Vol Up for TWRP), the screen just says TWRP for Lupus or CWR for lupus, without any kind of options... If I let the XPLAY boot normally, it just loops en the kernel screen....
I realized that I had to fastboot-erase user data and system... So I did it, and then flash the kernel again, with the same result. Nothing appears in the CWR or TWRP screen....
So I gave up LupusICS and Reflashed Lupusv12 for GB again, using the same method... but I got stuck with the same problem! the screen just loops in the LUPUS screen, and nothing appears in the recovery screen....
I even tried to use this
http://forum.xda-developers.com/showthread.php?t=1493996
to see if I can get to recovery and use the restore option..... I get the FreeXperia Prpject screen, and then black.... NOTHING!
What did I get wrong? Is there a solution to this problem?
Please, help me....
Flash .79 or. 62 firmware with flashtool
Flash lupus kernel (ics or gb - your choise) ( but this time flash kernel with flashtool )
Erase system and data from fastboot
You should be able to boot to recovery.
I can't see what are you doing wrong, but steps above should fix any issues
Sent from my C6502 using xda app-developers app
Thank you
Bakisha said:
Flash .79 or. 62 firmware with flashtool
Flash lupus kernel (ics or gb - your choise) ( but this time flash kernel with flashtool )
Erase system and data from fastboot
You should be able to boot to recovery.
I can't see what are you doing wrong, but steps above should fix any issues
Sent from my C6502 using xda app-developers app
Click to expand...
Click to collapse
Thank you, I did the flashtool magic and it works like a charm... I used a "enhanced" firmware that comes with Auroraplay...
And I'm thinking, MAYBE this is why I got stuck.... MAYBE this firmware is not compatible with ICS Lupus...
Do you know where can I get a clean .79 or .62 firmware?
Edit: I got the clean firmware from here...
http://forum.xda-developers.com/showthread.php?t=1589399
I'm sorry that I asked before looking myself...
The next question (and I've already looked), flashtools asks for a kernel.SIN file.... I've only seen kernel.IMG files
How do I flash the kernel with flashtools?
2nd Edit: NVM, I'm so stupid XD I got the answer to that, too....
BTW, excuse my broken English... this is not my native language....
And again, thank you for your help!