Hi everybody
I'm a noob and I am French (no luck ^^'). I apologize for my bad English (thank you google Traduct...)
I may have bricked my acer iconia a100 ; I wanted to flash it to ICS but I did something wrong.
The result is that I only have access to the green acer logo and I am unable to do a hard reboot (reset button AND usual technique doesn't work)...
The fastboot works (USB dowload protocol) but does not allow me to access the flash memory (windows does not detect it).
I think I have tried everything...
Is there a solution? Will I be forced to call the Acer's customer service?
Thanks
What did you do wrong? What were you doing to get you into your current situation?
I was too fast : I rooted with fastboot ICS (runit-win) by following the instructions BUT my version was still at 3.2
Clearly, the tablet stuck in the middle of the installation process (or I have not been patient enough) and so I had to restart.
Since then, I have no access at all to any function of the tablet, I can not make a hard reboot, restore, or even install a rom ...
pLaTiNiO said:
Clearly, the tablet stuck in the middle of the installation process (or I have not been patient enough) and so I had to restart.
Since then, I have no access at all to any function of the tablet, I can not make a hard reboot, restore, or even install a rom ...
Click to expand...
Click to collapse
Are you able to boot into the stock recovery? Try placing the update.zip on the sd card, then booting into it.
I tried, of course.
//BOOT with SD card
-here is what appears :
Code:
Erasing Cache before SD update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting kernel recovery image
-> no matter if an sd card is insered or not, no matter what rom I try...
Same problem for the hard reboot :
//HARD REBOOT
-This text scrolls very quickly and I can neither confirm nor make selection anything :
Code:
erasing userdata
erasing cache
+reboot (acer logo only (freeze?))
Only fastboot seems to react a minimum :
//FASTBOOT
Code:
Bootloader v0.03.06-ICS: Starting Fastboot USB dowload protocol
+ fastboot's windows drivers installation on link (beep usb) but not detected
From there, I think it is no longer possible to attempt anything else ...
Did you place the file on the external sd (you can't try any rom, it has to be the official one)?
Yes.
"update.zip" of the original (and official) firmware. Just in case, I've added an "recovery.img" file (plus lot of several different files. You never know.. ).
All this files are in the external SD card.
If I remember correctly, another update (ICS) was still in the flash memory (with many other unnecessary files..). I no longer have access and I'm not even sure they are still existing ^^'
I have not found any similar topic on the forums, I hope that a solution exists...
your booloader is unlock or not ?
im french too
Bootloader unlock, yes... I guess...
It works fine at first but since the crash, I'm note sure anymore.
I think my error was just wanting to install "ICS-rooting" (runit-win) before flashing the ICS rom...
If I could just acces to the internal flash memory, it would be great ^^'
pLaTiNiO said:
//BOOT with SD card
-here is what appears :
Code:
Erasing Cache before SD update...
SD update cmd: recovery
--update_package=SDCARD:update.zip
Booting kernel recovery image
-> no matter if an sd card is insered or not, no matter what rom I try...
Click to expand...
Click to collapse
The text appears quickly and then freeze, It's impossible to select an action or anything
hello my friends feel the same try reinstalling ics cwm and root on and tablet caught I can not do and when I try to install update.zip from fastboot flash tells me: sending flash (6144kb)
OKAY 1.891s
writing 'flash' ...
FAILED (remote: (00030003))
total time finished 2.063s
then at the table says in red: failed to process command flash: error (0x30003)
please help it is weekend and I have no leisure.
conseguido bien bien bien
pLaTiNiO said:
The text appears quickly and then freeze, It's impossible to select an action or anything
Click to expand...
Click to collapse
Essai avec une autre micro sd , et recopie le fichier update.zip .
Sinon tente de flasher ton A100 via l'image EUU :
http://vache-android.com/v1/download.php?fileID=117
----------
Try with another SD, and copy the update.zip file.
Otherwise try with the system image EUU
J'ai testé une autre micro SD, j'ai même reformaté en FAT32 pour être vraiment sur, j'ai essayé plusieurs firmware en les renommant à chaque fois "update.zip" : Rien n'y fait, ça ne fonctionne dans aucune situation.
J'en suis aujourd'hui à EUUs qui, lui, semble détecter mon A100 (via des drivers "picasso", je ne sais pas si c'est normal). Malheureusement, je n'arrive pas à trouver le numéro d'IUD alors que j'ai correctement suivi les tutoriaux (CPUID.txt ; 0x0411fc09010cXXXXX ; etc etc).
Si quelqu'un a une technique pour trouver son cpuid SANS utiliser l'interface de la tablette, je suis preneur...
----------------
I tested another micro SD, I even reformatted to FAT32 to be really sure, I tried lot of firmwares, renaming every time the files : "update.zip" ; Nothing works, it does not work in any situation.
I am now on EUUs. It seems to detect my A100 (via drivers "picasso", I do not know if this is normal). Unfortunately, I can't find the correct IUD number ; I correctly followed the tutorials (CPUID.txt; 0x0411fc09010cXXXXX, etc. etc.) but everything is impossible due to the failure of my tablet...
If someone has a technique to find his cpuid WITHOUT using the interface of the tablet, I'm interested ...
pLaTiNiO said:
J'ai testé une autre micro SD, j'ai même reformaté en FAT32 pour être vraiment sur, j'ai essayé plusieurs firmware en les renommant à chaque fois "update.zip" : Rien n'y fait, ça ne fonctionne dans aucune situation.
J'en suis aujourd'hui à EUUs qui, lui, semble détecter mon A100 (via des drivers "picasso", je ne sais pas si c'est normal). Malheureusement, je n'arrive pas à trouver le numéro d'IUD alors que j'ai correctement suivi les tutoriaux (CPUID.txt ; 0x0411fc09010cXXXXX ; etc etc).
Si quelqu'un a une technique pour trouver son cpuid SANS utiliser l'interface de la tablette, je suis preneur...
----------------
I tested another micro SD, I even reformatted to FAT32 to be really sure, I tried lot of firmwares, renaming every time the files : "update.zip" ; Nothing works, it does not work in any situation.
I am now on EUUs. It seems to detect my A100 (via drivers "picasso", I do not know if this is normal). Unfortunately, I can't find the correct IUD number ; I correctly followed the tutorials (CPUID.txt; 0x0411fc09010cXXXXX, etc. etc.) but everything is impossible due to the failure of my tablet...
If someone has a technique to find his cpuid WITHOUT using the interface of the tablet, I'm interested ...
Click to expand...
Click to collapse
ta tablette est elle reconnu en mode adb interface ?
Si c'est le cas, regarde dans les gestionnaire de périphériques, sur adb interface , dans le menu détail, l'onglet ''parent'' tu dois avoir un ligne du genre :
USB\VID_0502&PID_3325\37c74d043bfd155
ton uid est : 37c74d043bfd155 donc ton cpuid : 0x037c74d043bfd155
une fois redémarré en mode apx rentre uniquement ton uid cette fois-ci.
si tu as deja ton cpuid , eneleve juste le 0x pour avoir ton uid
-------------------------------------------------------
your tablet it is recognized in adb mode interface ?
If this is the case, look in device manager, on adb interface, in great detail, '' parent'' tab you have a line for example : USB\VID_0502&PID_3325\37c74d043bfd155
your uid is : 37c74d043bfd155
so your cpuid : 0x037c74d043bfd155
If you have your cpuid , remove 0x for have your uid
Je peux me connecter en USB via 2 types de drivers :
- ACER Fastboot interface (bootloader ICS) mais qui dans mon cas semble défaillant.
- Acer Picasso USB Boot-recovery driver (EUUs mode) qui lui crée vraiment une liaison entre le PC et la tablette.
Malheureusement, aucune trace de ADB (avec le logiciel USBDeview ou avec le gestionnaire de périphériques Windows)...
J'ai essayé à peut près toutes les combinaisons d'UID possibles par rapport aux ID ayant un rapport avec Acer sur ma machine...
------------------------------
I'm able to connect the tablet via USB with two methods :
- ACER fastboot interface (ICS bootloader) but, in my case, appears to fail.
- Picasso Acer USB Boot-recovery driver (EUUs mode) which seems to creates succefully a connection between the PC and the tablet.
Unfortunately, no trace of ADB (with software USBDeview or peripherals manager of Windows) ...
I tried all possibles combinations of UID compared to IDs relevant to "Acer" on my machine ...
it sounds like you tried to unlock the bootloader while on honeycomb bootloaders. is that what you initially did? sounds like it flashed the bootloaders but im pretty sure u need to be on ics bootloaders first.
also download acer a100 drivers. make sure your pc drivers are correct. if u get fastboot workjng your golden
Sent from my SGH-I897 using xda premium
hi, (sorry for my bad english, i am speak spanish)
can you entry in fastboot? (unlock)
...
in fastboot mode (unlock)
http://forum.xda-developers.com/showthread.php?t=1601663
-copy the file in sdk/platform-tools
-conect the device
- fastboot flash recovery recovery.img
- reboot with lock rotation ON (down) and Power ON + Vol up (recovery mode)
- wipes and flash a rom
...
if you cant entry in fastboot mode (unlock)
you only can put a rom (update.zip) in external sdcard and pray xD
i recomended leak 1.0.12 or flexreaper rom mod (civato)
if you cant with this roms you can prove with this: http://code.google.com/p/acer-a100/downloads/list
in the webpage you can see 2 or 3 roms (HC 3.2)
and system/recovery/flexrom/boot
you can use only update.zip file, change the name ^^
(sorry for my BAD english ejejej)
good lucky
you can wait to oficial ICS and use the warranty... you say: after upgrading my tablet not start :B (?)
Backups...
If you can get to Fastboot and "PUSH" files to your A100 then try to use a backup img...
I have uploaded full BACKUP images for the A100 in case something like this occurs... Check this thread out for the img backups:
http://forum.xda-developers.com/showthread.php?t=1600009
Hope they help, I would imagine if you can push the STOCK partition back into mmcblk0p1 your Acer would then go back to normal, if at worst, it will be able to recognize the UPDATE.ZIP...
Cross your fingers man... jejeje
One other thing... MAKE SURE, MAKE DAMN SURE you have the updated drivers from ACER... you will not find them through the A100 as ICS has yet to be released so you will HAVE to select the A200 and the file you download will be called: USB_ACER_1.0_A32HA40I_A.ZIP I would upload for you but cant do it from work... However, you can find them here: http://us.acer.com/ac/en/US/content/drivers
Related
hi, my p3300 is dead, only just tricolor boot loader
if i flash with original french wm5, flash ok but no boot, only bootloader
pda dead???
salut, j'ai enlevé ma batterie pour changer de carte sim, j'ai remis la batterie et le pda voulais plus demarrer, me suis dis c'est rien on fais hard reset et ca devrais aller, mais non, quedalle, il entre juste en mode bootloader tricolor, j'ai remarqué qu'il etait repassé en ipl et spl 1.12
j'ai flasher la rom wm5 fr d'origine ms rien n'y fait il veux rie savoir, juste le bootloader
que faire?
pda mort???
je desespere un peu là.
[email protected] si quelqu'un a la soluce qu'il me le dise au plus vite, aidez moi please
Did u try a new Flashing?
May be u can try to flash a new ROM.
Regards
same problem, not possibl to flash with another image, only french wm5, another image say error message " wrong size etc..."
i retry supercid for flash another image but same problem "wrong image file etc..."
pda no start, just boot loader only
when flash succifull, pda don't restart, i put small reset, and "boum" renew bootloader.
impossible to start, only bootloader
Bonjour
Je suis sous ubuntu et j'ai gagné une tablette archos G9 250go turbo.
Et comme il n'y a pas la possibilité de mettre de SDCARD je voulais savoir si il y avait un moyen autre que de démonter l'apparteil pour faire reconnaitre sous ubuntu l'appareil en disque dur externe afin qu'avec gparted de faire des partitions.
Dans un but d'organisation de la tablette et aussi pour mieux gérer la possibilité de faire tourner ubuntu sur la même tablette.
mahel34 said:
Bonjour
Je suis sous ubuntu et j'ai gagné une tablette archos G9 250go turbo.
Et comme il n'y a pas la possibilité de mettre de SDCARD je voulais savoir si il y avait un moyen autre que de démonter l'apparteil pour faire reconnaitre sous ubuntu l'appareil en disque dur externe afin qu'avec gparted de faire des partitions.
Dans un but d'organisation de la tablette et aussi pour mieux gérer la possibilité de faire tourner ubuntu sur la même tablette.
Click to expand...
Click to collapse
HI !
Next time try to write in English ...or your Thread will be delete !!!
Ok !!
I try !
I am under ubuntu and I gained a tablet archos G9 250go turbo.
And as there is no possibility of putting of SDCARD I wanted to know if there was a means other than to defuse the apparteil to make reconnaitre under ubuntu the device in external hard disk so that with gparted to make partitions.
In a purpose of organization of the tablet and also to manage better the possibility of making turn ubuntu on the same tablet.
mahel34 said:
I am under ubuntu and I gained a tablet archos G9 250go turbo.
And as there is no possibility of putting of SDCARD I wanted to know if there was a means other than to defuse the apparteil to make reconnaitre under ubuntu the device in external hard disk so that with gparted to make partitions.
Click to expand...
Click to collapse
Sorry but this is impossible. System is designed to use MTP or PTP (not usb mass storage) for transferring files
Ok !!!
Thank you gen_scheisskopf
It's impossible to make partition ..... it's stupid..... !!
I opened my your tablet for demonter the hard disk to connect it on another machine.
I was so able to make two partitions of 32go one fat32 and one ext4.
But by going back up the hard disk on the tablet ICS do not find the partitions.
How is that ICS recognizes the partitions?
All partition mounts are hardcoded in kernel init (init.rc file and possibly in /system/etc/init/[device name].rc), this is standard in Android (since *always*)
But what is the use for fat32 partition? System does not support Mass Storage mode
The fat 32 is for test.
But i don't find the "kernel init (init.rc file and possibly in /system/etc/init/[device name].rc)"
pffff
mahel34 said:
But i don't find the "kernel init (init.rc file and possibly in /system/etc/init/[device name].rc)"
pffff
Click to expand...
Click to collapse
It's in system image
a)if you use default firmware- there is no way to change anything
b)if you use custom firmware- init.rc is in the root of filesystem
OK i understand !! i use a default firmware !!
I go to read the custom firmware !! mdr !!! i want my partitions !! mdr mdr !!
is there a way to upgrade our phone from gb to jb without using a pc (odin),
many tried to use the software update but they failed,
any link for that?
boolat said:
comprendre l'anglais .... justement c'est sa la problème !!
nous devons passer par google translate ou logiciel de traduction ...
je préfère écrire en français et avoir la réponse en français !
pourquoi ne pas avoir la section en français pour se genre de forum ?
je ne voie pas ou est le problème ?
Merci
Understand English .... Precisely the problem is his!
We must go through google translate or translation software ...
I prefer to write in french and have the answer in french!
Why not have a section for french kind of forum?
I may not see or is the problem?
Thank you
Click to expand...
Click to collapse
No. Only with Kies or Odin.
Изпратено от моят GT-I8160.
hackuletz16 said:
is there a way to upgrade our phone from gb to jb without using a pc (odin),
many tried to use the software update but they failed,
any link for that?
Click to expand...
Click to collapse
So why is Odin failing you?
They main problems are:
Not running Odin in Administrator Mode - right-click on the program and select 'Run As A Administrator'.
The phone not connecting or going into Download Mode - From Off and disconnected, Hold down the power, home and volume down buttons at the same time. A warning screen will flash up warning you about the dangers of custom operating systems then press the volume up button to continue. You'll get a picture of an Android on screen and 'Downloading... Do not turn off target !!' on screen. Plug your Ace 2 into your PC with the USB lead.
hi
sorry for my bad english i don't speak english very well (i'am a french man)
laster tonight, i want to update my lenovo vibe p1 in android 6.0 official by lenovo with your guide tuto in your forum
but when i start the flash "download" i have a message "sahara fail" i click in "exit"
5 minute ago i conected my smartphone in my computeur with the official cable (i always use the micro usb cable with my phone) and when i to go to "peripherique gestional" (sorry for my bad english) i see that sorry i hawe a error when i posted a link .jpg my phone when it conected in my pc see "unknow usb"
i want to help please because my phone dont power on ??? my phone is definity bricked ??? because my phone is only one week and i buy in aliexpress
playgeek said:
hi
sorry for my bad english i don't speak english very well (i'am a french man)
laster tonight, i want to update my lenovo vibe p1 in android 6.0 official by lenovo with your guide tuto in your forum
but when i start the flash "download" i have a message "sahara fail" i click in "exit"
5 minute ago i conected my smartphone in my computeur with the official cable (i always use the micro usb cable with my phone) and when i to go to "peripherique gestional" (sorry for my bad english) i see that sorry i hawe a error when i posted a link .jpg my phone when it conected in my pc see "unknow usb"
i want to help please because my phone dont power on ??? my phone is definity bricked ??? because my phone is only one week and i buy in aliexpress
Click to expand...
Click to collapse
Hi.
Try this:
1. Go to device manager and see there, how your phone is recognized.
2. Uninstall and reinstall the drivers.
3. Re try the flashing procedure.
4. Tell us here what happened.
5. Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
stympy said:
Hi.
Try this:
1. Go to device manager and see there, how your phone is recognized.
2. Uninstall and reinstall the drivers.
3. Re try the flashing procedure.
4. Tell us here what happened.
5. Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Click to expand...
Click to collapse
ok i try it and i posted here in 10 minute
hello i uninstall and reinstall the driver and qfil and Hello I just uninstall and reinstall the driver and nothing happens when I go in the device manager nothing happens while before i was showing peripherique iconnu and yet I took the drivers of the other topic I use google translation http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
playgeek said:
hello i uninstall and reinstall the driver and qfil and Hello I just uninstall and reinstall the driver and nothing happens when I go in the device manager nothing happens while before i was showing peripherique iconnu and yet I took the drivers of the other topic I use google translation http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
Click to expand...
Click to collapse
Hi.
Did you repeated the procedure?
When you looked in device manager, did you pluged the phone with the Volume + pressed?
What did you PC say?
hello
oui j'ai bien déinstaller et réinstaller mes drivers, j'ai bien conecter mon téléphone au pc en appoyant sur volume + avant de le brancher, oui j'ai bien utiliser le cable usb officiel du téléphone (j'ai essayer avec un autre et ca ne marche pas)
je veux bien mettre une capture d'ecran de l'erreur que j'ai mais a chaque fois que j'essaye d'en mettre un j'ai un message du forum comme quoi c'est interdit de mettre un lien
en gros le message après d'avoir brancher mon téléphone a mon pc et que je vais dans le gesitonaire de peripherique c'est "peripherique usb inconnu (echec de demandeur de descripteur de péripherique) etat : Erreur de pilote"
je fais quoi ? cr j'arrive plus a faire reconnaitre le téléphone via qfil ???
désole mais j'utilise google traduction j'suis francais
Yes i have to uninstall and reinstall my drivers, i have to connect my phone to the pc by using volume + before connecting it, yes I use the official USB cable of the phone (I try with another And it does not work)
I want to put a screenshot of the error I have but every time I try to put one I have a message from the forum that it is forbidden to put a link
Basically the message after having plugged my phone to my pc and i go into the peripheral gesitonaire it's "unknown usb device (peripheral descriptor request failed) state: driver error"
what do I do ? Cr i can not get to recognize the phone via qfil ???
Sorry but I use google translation j'suis francais
playgeek said:
hello
oui j'ai bien déinstaller et réinstaller mes drivers, j'ai bien conecter mon téléphone au pc en appoyant sur volume + avant de le brancher, oui j'ai bien utiliser le cable usb officiel du téléphone (j'ai essayer avec un autre et ca ne marche pas)
je veux bien mettre une capture d'ecran de l'erreur que j'ai mais a chaque fois que j'essaye d'en mettre un j'ai un message du forum comme quoi c'est interdit de mettre un lien
en gros le message après d'avoir brancher mon téléphone a mon pc et que je vais dans le gesitonaire de peripherique c'est "peripherique usb inconnu (echec de demandeur de descripteur de péripherique) etat : Erreur de pilote"
je fais quoi ? cr j'arrive plus a faire reconnaitre le téléphone via qfil ???
désole mais j'utilise google traduction j'suis francais
Yes i have to uninstall and reinstall my drivers, i have to connect my phone to the pc by using volume + before connecting it, yes I use the official USB cable of the phone (I try with another And it does not work)
I want to put a screenshot of the error I have but every time I try to put one I have a message from the forum that it is forbidden to put a link
Basically the message after having plugged my phone to my pc and i go into the peripheral gesitonaire it's "unknown usb device (peripheral descriptor request failed) state: driver error"
what do I do ? Cr i can not get to recognize the phone via qfil ???
Sorry but I use google translation j'suis francais
Click to expand...
Click to collapse
I just instaled the drivers on my " WARR LAPTOP"
I will atach 3 pictures and tell me if my pictures are the same on your PC.
I reinstall qfil but I have a question after unpacking the file qualcool driver 2.1 ... I find myself with two .cab file that 7-zip offers to unpack and I do not know what to do with it? And in the other folder I have two files qualcool_usb_driver and lenovo usb driver I install the driver lenovo usb driver but when I go into the other folder ave 4 under file checked free testcertificate and tools I do not know what in Do so even when doing right click> install with administrator rights nothing happens thank you in advance ???
And I'm sorry I still can not get a screenshot when I know how to do with noelskack I have a message telling me that I can not post link because I have less than 10 post Normal ca?
_______________________________________________
j'ai reinstaller qfil mais j'ai une question après d'avoir décompresser le dossier qualcool driver 2.1... je me retrouve avec deux fichier .cab que 7-zip me propose de décompresser et je ne sais pas quoi en faire ? et dans l'autre dossier j'ai deux dossier qualcool_usb_driver et lenovo usb driver j'ai installer le driver lenovo usb driver mais quand je me rend dans l'autre dossier ave 4 sous dossier checked free testcertificate et tools je ne sais pas quoi en faire car même en faisant clique droit > installer avec les droits administrateur il ne se passe rien merci d'avance ???
et désole je n'arrive toujours pas a poster de capture d'ecran alors que je sais comment faire avec noelskack j'ai un message me disant comme quoi je ne peux pas poster de lien car j'ai moins de 10 post c'est normal ca ?
playgeek said:
I reinstall qfil but I have a question after unpacking the file qualcool driver 2.1 ... I find myself with two .cab file that 7-zip offers to unpack and I do not know what to do with it? And in the other folder I have two files qualcool_usb_driver and lenovo usb driver I install the driver lenovo usb driver but when I go into the other folder ave 4 under file checked free testcertificate and tools I do not know what in Do so even when doing right click> install with administrator rights nothing happens thank you in advance ???
And I'm sorry I still can not get a screenshot when I know how to do with noelskack I have a message telling me that I can not post link because I have less than 10 post Normal ca?
_______________________________________________
j'ai reinstaller qfil mais j'ai une question apr�s d'avoir d�compresser le dossier qualcool driver 2.1... je me retrouve avec deux fichier .cab que 7-zip me propose de d�compresser et je ne sais pas quoi en faire ? et dans l'autre dossier j'ai deux dossier qualcool_usb_driver et lenovo usb driver j'ai installer le driver lenovo usb driver mais quand je me rend dans l'autre dossier ave 4 sous dossier checked free testcertificate et tools je ne sais pas quoi en faire car m�me en faisant clique droit > installer avec les droits administrateur il ne se passe rien merci d'avance ???
et d�sole je n'arrive toujours pas a poster de capture d'ecran alors que je sais comment faire avec noelskack j'ai un message me disant comme quoi je ne peux pas poster de lien car j'ai moins de 10 post c'est normal ca ?
Click to expand...
Click to collapse
I want to do one thing before do something:
1. disconect the phone from PC
2. press power button for 20 secconds and tell me what is going on!
3. The phone should start.
stympy said:
I want to do one thing before do something:
1. disconect the phone from PC
2. press power button for 20 secconds and tell me what is going on!
3. The phone should start.
Click to expand...
Click to collapse
hello my phone don't want to power on
playgeek said:
hello my phone don't want to power on
Click to expand...
Click to collapse
press volume up and until connect with the cable to pc
Don't use the USB cable you got with the phone it is garbage I had no end of problems with it and ended up using an old USB cable I had for a Huawei that worked a treat ,the driver I used is the Qualcomm_USB_Drivers.zip .
Hello i try what you told me and since the last time i had posted here i had more touch on my phone i try to connect it to my pc by pressing volume + and with a Other usb cable than the one provided with the phone but I do not know what happens but nothing happens when I plug it on my pc whereas it is more than two weeks that I no longer touch
And also I wanted to reinstall the qualcomm_usb_drivers.zip but when I unpack the zip I come across a .exe lenovo machin stuff but I fall into a folder with subfolder I do how already to install it on my pc?
Please thanks in advance
playgeek said:
Hello i try what you told me and since the last time i had posted here i had more touch on my phone i try to connect it to my pc by pressing volume + and with a Other usb cable than the one provided with the phone but I do not know what happens but nothing happens when I plug it on my pc whereas it is more than two weeks that I no longer touch
And also I wanted to reinstall the qualcomm_usb_drivers.zip but when I unpack the zip I come across a .exe lenovo machin stuff but I fall into a folder with subfolder I do how already to install it on my pc?
Please thanks in advance
Click to expand...
Click to collapse
Qualcomm_USBDriver_2.1.0.5.zip or Qualcomm_USB_Drivers.zip
Download the second one I couldn't find an exe in the first,the file is LenovoUsbDriver_autorun_1.0.16.exe
Could revive hard-bricked Redmin Note 8T through EDL mode. However, IMEI's proved nulled. In an attempt to flash a 'repaired' qcn file (qcn file with replaced own IMEI), the phone ended up in situation that asked for a new attempt to re-install stock-ROM through EDL again. Succeeded in doing so, however... this time the phone ended up with a locked bootloader. Consequences: without valid IMEI's, a sim-card is not recognized, therefore am unable to activate a mobile network. And switching off WiFi with an activated mobile network is an essential pre-condition for the normal Xiaomi unlock-procedure, using the MiFlash Unlock tool. And with a locked bootloader, I can't root the phone, can't try anything elso like repairing IMEI's...
Does anyone see a way out? Especially, how to unlock bootloader?
Reflashing to stock meant also relocking the bootloader. Your attempt to restore the qcn obviously failed. To get out of this, you have to (successfully) fix the qcn file. Unless then, any thoughts of unlocking are wasted time...
L'outil miflash unlock fonctionne avec fastboot en câble USB et un compte créé sur MI pour le déverrouiller. J ai le même problème que toi en flashant une rom j' ai tout perdu. Maintenant j arrive facilement a flash mon redmi note 8t Willow tous fonctionne le Root rom Android 13 wifi et sensor ok, mais j ai plus de IMEI. Si tu trouve un qcn qui fonctionne contact moi on essaiera de s aider avec Google traduction
I'm awaiting the unlock-waiting period of 168 hours, to unlock my wife's Redmi Note 8T. Will then try to back-up the qcn file of her phone, and then to find with HxD her IMEI's. Then I hope to replace those (known to me) IMEI's with my RN8T's original IMEI's. Then save that file. But even then... how to replace the present faulty qcn-file with the 'repaired' file on a not-rooted phone? And I'm unable to root the phone because of the locked bootloader, at least I don't know a way tot do so...
Attention quand tu va déverrouiller le redmi de ta femme ça va le formater sauvegarde bien tous (photo musique ....) Le tiens tu peux le déverrouiller avec miflash unlock en démarrant en fastboot (bouton power et volume -) au pire il y a la commande ( fastboot oem unlock ) si mes souvenir son bon, y a des tuto sur le forum pour ça.
[email protected] said:
Attention quand tu va déverrouiller le redmi de ta femme ça va le formater sauvegarde bien tous (photo musique ....) Le tiens tu peux le déverrouiller avec miflash unlock en démarrant en fastboot (bouton power et volume -) au pire il y a la commande ( fastboot oem unlock ) si mes souvenir son bon, y a des tuto sur le forum pour ça.
Click to expand...
Click to collapse
Worked! It was all less complicated than I thought, probably because I had gone through the unlocking process earlier on. This time it sufficed to activate the developer options, enable OEM Unlocking and USB debugging, enable file transfer and put the phone into Fastboot mode. Then to start MiFlash-Unlock and log-in with my MiAccount username and password. No need to switch off WiFi and to have enabled mobile data. Thanks a lot for the tip. Now, I can at least proceed with rooting the phone!
gjongbloed said:
Worked! It was all less complicated than I thought, probably because I had gone through the unlocking process earlier on. This time it sufficed to activate the developer options, enable OEM Unlocking and USB debugging, enable file transfer and put the phone into Fastboot mode. Then to start MiFlash-Unlock and log-in with my MiAccount username and password. No need to switch off WiFi and to have enabled mobile data. Thanks a lot for the tip. Now, I can at least proceed with rooting the phone!
Click to expand...
Click to collapse
cool glad you made it. did you find a correct qcn for the redmi note 8t and where to modify the imei in this file, it is in hexadecimal if I remember correctly?
[email protected] said:
cool glad you made it. did you find a correct qcn for the redmi note 8t and where to modify the imei in this file, it is in hexadecimal if I remember correctly?
Click to expand...
Click to collapse
Yes, with QFIL I made a backup of the qcn file of my wife's RN8T . With HxD I could locate both (her) IMEI's and replace those with my IMEI's. Then saved the file and restored it with QFIL in my RN8T. All seemed successful until the end: Error in setting phone mode to MODE_RESET_T. Well, I could restart the phone and *#06# showed the correct (my) IMEI's. But I still couldn't use the phone, couldn't activate the SIM card, and, moreover, WiFi hardly worked! In other words, no improvement. Still plodding on...
gjongbloed said:
Yes, with QFIL I made a backup of the qcn file of my wife's RN8T . With HxD I could locate both (her) IMEI's and replace those with my IMEI's. Then saved the file and restored it with QFIL in my RN8T. All seemed successful until the end: Error in setting phone mode to MODE_RESET_T. Well, I could restart the phone and *#06# showed the correct (my) IMEI's. But I still couldn't use the phone, couldn't activate the SIM card, and, moreover, WiFi hardly worked! In other words, no improvement. Still plodding on...
Click to expand...
Click to collapse
EDIT MODERATION
As a member, @[email protected] , you know that you must use the English language in your posts, as per forum rule #4, because you must have read the rules before posting.
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Click to expand...
Click to collapse
As a "unique" courtesy, I have translated your post.
Please be respectful and observe XDA rule #4 for all future posts.
Next time your post will be deleted!
Regards - Sib64 - Moderator
You changed the persistent.img me it posed me problems, I reflasher one of the first rom miui in Android 9 but with a format ZIP (with the twrp orangefox.) on my Willow after the persistent.img and my sensor gyroscope and wifi worked well (unlike before) after I also modified a qcn with my IMEI.
But now all is functional I have the IMEI's displayed but I have a serial number that is wrong so even with a sim I can't call no radio. I put my sim in my willoW and it recognizes it well and asks me for the pin code .but I can't call. I'm looking at the vendor now I'm not sure what to do.
I think we are not going to get away with this lol
Click to expand...
Click to collapse
Tu a changer le persist.img moi il me posait des problemes , j'ai reflasher une des première rom miui en Android 9 mais avec un format ZIP ( avec le twrp orangefox.)sur mon Willow après le persist.img et mes capteur gyroscope et wifi marchait bien (contrairement à avant) après j'ai aussi modifié un qcn avec mes IMEI.
mais maintenant tous est fonctionnel j'ai bien les IMEI qui s'affiche mais j'ai un numéro de série qui est faut donc même avec une sim je ne peux pas appeler pas de radio. J'ai mis ma sim dans mon willoW et il l'a reconnaît bien et me demande le code pin .Mais Je ne peux pas appeler. Je me penche sur le vendor maintenant je suis plus trop quoi faire.
Je pense que l'on ne va pas s'en sortir comme ça lol
Well, after many tries, I finally have been able to correct the IMEI's. They now read as they should read. Not with a backup qcn file of my wife's Redmi Note 8T, subsequently changing the IMEI's into the IMEI's of my Redmi Note 8T, and then restoring it. That still resulted in zeroed IMEI's, and, after restart of the phone, in a bootloop. Happily, I could get out of that by restoring a backup of the /efs and /persist partitions.
But with Qualcomm_Smartphone_Write_IMEI.zip and with the phone connected to the pc via a diagnostic COM-port, I managed - again after a number of fruitless tries (no connection) - to change the nulled IMEI's into the correct IMEI's. So far, so good, but a (working) sim-card is still not recognized, I still can't use the phone-app, I still can't use a mobile network... I'm searching for a solution of this problem, but sofar haven't been able to find anything..............