This is what I did before I have this problem with my 1X.
1. Unlocked using htcdev.com
2. Installed CWM from here.
3. SuperWipe.
4. I went back to Hboot after SuperWipe instead of flashing rom.
5. I went back to recovery but my phone will shut down right after HTC logo and reboot by itself and it will just stuck there.
Could anyone help me please? What did I do wrong?
ST4LK3R89 said:
What did I do wrong?
Click to expand...
Click to collapse
You didn't flash another ROM after the Super Wipe that's what!!
You'll need to flash your RUU to go back to stock and start again
Ok I will help you out but you need to be more careful.
Also I would recommend against using superwipe right now.
That's my personal opinion....
get into fastboot
Connect USB
from your pc in fastboot directory type:
fastboot erase cache
fastboot reboot bootloader
now get into recovery and flash the Rom..
thank you.
I was scared and did factory reset from hboot. flashed CWM again and I can go into recovery mode now but obviously there's no rom to flash in my phone now.
downloaded Asia WWE RUU. it can't find my phone after the part when I turned on the phone to connect to pc because it's stuck in htc logo?
I'm in trouble now.
1. Boot into HBOOT, then select FASTBOOT from the menu.
2. Use the fastboot commands to flash the stock recovery (get it from the CWM thread)
3. Use the fastboot commands to relock the bootloader
4. Flash the RUU for your phone
Should get you back to stock
1) Flash stock recovery:
Grab it from here: http://forum.xda-developers.com/showthread.php?t=1579797
Then Boot in bootloader >> Fastboot and issue the following command (assuming that the offical recovery is named recovery.img): fastboot flash recovery recovery.img
2) Relock Bootloader:
Boot in bootloader >> Fastboot and issue the following command: fastboot oem lock
3) Find and run/flash the RUU for your device, find it here: http://forum.xda-developers.com/showthread.php?t=1543604
Courtesy of DaDoctor
Mod or Die
Mod or Die
THANK YOU!!!!
YES!!!! ITS OKIE NOW!!!! Sorry for being such a nubcake. I never encounter a problem like this. THANK YOU!
Related
Well i wanted to flash the Amon_RA 2.0.1 and that went wrong. After that i can't go in recovery and I can't flash a now one.
If some one can help me.
Thank you
How did you try to flash it? and Why can't you flash a new one? some info please!!
But when changing recovery on desire, there are 2 possibilities:
1. if your phone is s-on, you should use unrevoked like when you installed clockwork mod at first.
2. if your phone is s-off, you should use fastboot commands(boot into fastboot and run "fastboot flash recovery recovery.img" recovery.img being the img file containing the recovery)
I did it with unrevoked.
I have S-off but i can't make the flash work with the fastboot.
ok nvm. it works again but i can't make fastboot to work
any how thank you!
Hi all,
I'm looking at flashing ARHD. I've read through the instructions at least 20 times but I'm unsure of just a few things and want to be 100% before trying this as there are a heaps of people who seem to have bricked by not following instructions properly.
As I understand, the process is as follows.......
1. Download super wipe zip and place it on SD card.
2. Download rom and place on SD card.
3. Download firmware package and un-rar.
4. Download 'Official Clockworkmod Touch Recovery 5.8.3.1'
5. Disable antivirus protection on PC.
6. Ensure ADB drivers are installed correctly on PC.
7. Unlock Bootloader via HTC-dev
8. Boot phone in to bootloader and enter Fastboot Mode
9. Install "recovery-clockwork-touch-5.8.3.1-endeavoru.img" via fastboot
command in ADB console.
10. Boot in to the newly installed recovery and perform a nandroid backup.
11. Reboot phone into bootloader and enter Fastboot mode.
12. Run "install-boot-windows.bat' as administrator to install the new firmware
13. Reboot and enter recovery mode.
14. Using the newly installed recovery, flash the
"Android_Revolution_HD_Super_Wipe_One_X.zip" on the SD card.
15. While still in recovery, flash the Android Revolutipn ROM zip.
16. Reboot and enjoy.
Have I missed anything there and is this in the correct order?
At what point does the PJ46IMG.zip need to be installed? The instructions for this are unclear.
Also, in the event something goes wrong and the phone doesn't boot (but i can get into recovery mode), can I just flash the backup file? Or does the fact that I've overwritten the boot.img via Fastboot mean that I can't restore the backup without flashing a stock boot.img via fastboot first?
Thanks and sorry to be a n00b. I'm just finding the order a little mismatched moving between various threads and want to be 100% sure.
Cheers.
You'll be fine. Both Firmware 1.26 and 1.28 is OK with arhd.
On going back to your nandroided stock rom, flash your stock boot.img then restore stock nandroid.
Sent either from my Arc or One X using xda premium
Remember to flash boot.img before the rom
I got my One X yesterday, did all you did BUT, after step 11. nandroid backup, I did these: Nandroid -> Super wipe -> Flash boot.img -> Flash ARHD 3.1.0 and everything works fine
Nubzori said:
Remember to flash boot.img before the rom
I got my One X yesterday, did all you did BUT, after step 11. nandroid backup, I did these: Nandroid -> Super wipe -> Flash boot.img -> Flash ARHD 3.1.0 and everything works fine
Click to expand...
Click to collapse
Did you flash the PJ46IMG.zip firmware file?
Rycon33 said:
You'll be fine. Both Firmware 1.26 and 1.28 is OK with arhd.
Click to expand...
Click to collapse
Does that mean I don't need to flash PJ46IMG.zip?
Sentinel196 said:
Does that mean I don't need to flash PJ46IMG.zip?
Click to expand...
Click to collapse
No need for firmware files
Hi, tried to install a 4.4 ROM but it failed and then went downhill. Does anyone have the latest image file for the bootloader? Now I am soft bricked trying to go back to stock but all I can find are the old bootloaders and they do not work with the kitkat image file from google. Thanks for the help!
http://forum.xda-developers.com/showthread.php?t=2383146
See post#2
I flashed it from recovery.
hyperxguy said:
http://forum.xda-developers.com/showthread.php?t=2383146
See post#2
I flashed it from recovery.
Click to expand...
Click to collapse
Hi, thanks for that but I already have it. The thing is it's a .zip i need the .img and inside that zip there are multiple files i don't exactly know which one is the bootloader.
Thanks!
th3xeroeagle said:
Hi, tried to install a 4.4 ROM but it failed and then went downhill. Does anyone have the latest image file for the bootloader? Now I am soft bricked trying to go back to stock but all I can find are the old bootloaders and they do not work with the kitkat image file from google. Thanks for the help!
Click to expand...
Click to collapse
You can find many of the kernels/recoveries/bootloaders in the download section of this thread:
http://forum.xda-developers.com/showthread.php?t=2534698
The problem is it might not get you to where you want to be.
What exactly are you calling a "brick"?
If you have a bootloader issue, you won't even see the Google during boot. It is rare to be bricked in that way.
You are probably stuck on the X or bouncing balls animation.
You can get out of that by going to recovery and performing wipe data factory reset.
If you are stuck at "Google", then you need to reflash the factory image (you can choose the nowipe option and possibly keep your user data)
sfhub said:
You can find many of the kernels/recoveries/bootloaders in the download section of this thread:
http://forum.xda-developers.com/showthread.php?t=2534698
The problem is it might not get you to where you want to be.
What exactly are you calling a "brick"?
If you have a bootloader issue, you won't even see the Google during boot. It is rare to be bricked in that way.
You are probably stuck on the X or bouncing balls animation.
You can get out of that by going to recovery and performing wipe data factory reset.
If you are stuck at "Google", then you need to reflash the factory image (you can choose the nowipe option and possibly keep your user data)
Click to expand...
Click to collapse
hey, thanks for the reply. I'm trying to get my tablet to kitkat with the stock image from google. but I hear that with kitkat there is a new bootloader so I want to update that through fastboot (my device is recognized so I call it a soft boot) but the problem is when I erase the boot and reflash the boot.img and try to flash the new .img it doesn't load up. im using these commands
Code:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot flash boot
fastboot flash recovery
fastboot flash system
fastboot reboot-bootloader
my current bootloader version says FLO 4.01 not sure how to update it.
th3xeroeagle said:
hey, thanks for the reply. I'm trying to get my tablet to kitkat with the stock image from google. but I hear that with kitkat there is a new bootloader so I want to update that through fastboot (my device is recognized so I call it a soft boot) but the problem is when I erase the boot and reflash the boot.img and try to flash the new .img it doesn't load up. im using these commands
Code:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot flash boot
fastboot flash recovery
fastboot flash system
fastboot reboot-bootloader
my current bootloader version says FLO 4.01 not sure how to update it.
Click to expand...
Click to collapse
4.01 is the bootloader that came with kitkat.
you can't just say
fastboot flash boot
you need to say
fastboot flash boot boot.img
and have the boot.img in place.
I suggest you just follow the instructions in this post:
http://forum.xda-developers.com/showthread.php?p=47640458#post47640458
Use the nowipe option and you should be able to keep your user data unless you erased or messed it up earlier.
sfhub said:
4.01 is the bootloader that came with kitkat.
you can't just say
fastboot flash boot
you need to say
fastboot flash boot boot.img
and have the boot.img in place.
I suggest you just follow the instructions in this post:
http://forum.xda-developers.com/showthread.php?p=47640458#post47640458
Use the nowipe option and you should be able to keep your user data unless you erased or messed it up earlier.
Click to expand...
Click to collapse
AH! It was in the general section, I looked everywhere in the development sections. Thank you very much!
I have successfully unlocked the bootloader. I flashed the cwm recovery by fastboot with the proper command and the command executed fine. I also erased the cache with fastboot. But when I select recovery from the hboot menu it gets stuck on to screen with the HTC logo with following text in red "this build is for development purposes only do not distribute outside of htc without written permission". I cannot access the cwm menu.
I tried the twrp recovery too but no avail. The same screen comes up.
I searched a bit and found that some have faced the same issue with HTC ONE X and had their problem solved by flashing an interim unofficial cwm built for their device. But I can't find any such interim cwm recovery for HTC ONE V.
Please help.
What command u used to flash??
rohov said:
What command u used to flash??
Click to expand...
Click to collapse
fastboot flash recovery nameoftherecovery.img
In my case it was fastboot flash recovery recovery.img
Nothing wrong on my side. This is not my first time.
And the commands executed without any error.
I even relocked the bootloader and unlocked it again. But, still the problem persists.
anice06 said:
fastboot flash recovery nameoftherecovery.img
In my case it was fastboot flash recovery recovery.img
Nothing wrong on my side. This is not my first time.
And the commands executed without any error.
I even relocked the bootloader and unlocked it again. But, still the problem persists.
Click to expand...
Click to collapse
If you take a ruu and remove the Rom.zip and from that take the recovery.img and flash that, does the phone boot into the stock recovery?
Sent from my HTC Desire S using Tapatalk
Hi guys i flashed the 3.5.3 CM today but i decided to go back with 3.26 again, so i followed a guide that tells me to install stock recovery over twrp before i install the rom but after i fastboot flash the recovery i cannot go into the recovery anymore.
i tried to flashed the modified twrp and then boot to recovery but still wont open it.
the phone works and can go into fastboot still but it just wont access recovery
anyway to fix it? sorry if this has been discussed before. im on a mac for more info
TIA
1+3
Is your OS booting?
yea
Got the same problem here. Can boot into system and fastboot but if boot to recovery i get the oneplus logo and the bootloaderscreen and then i get a black screen where i should get my recovery. And if wanna Force shutdown my oneplus it freezes somehow. I tried everything to fix this with no result. Stock recovery doesnt work too.
Hi I just had the same problem, I have sent it back to Oneplus for repair. According to the ticket, I had a faulty motherboard, which has been replaced. If you can, do it. I only had to wait for a week before it was sent back.
Had the same problem last night. Following method nr 2 in thos thread solved it.
http://forum.xda-developers.com/showthread.php?t=3405700
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
using fastboot to wipe the recovery partition then fastboot flashing modified twrp twice worked for me, i think the oneplus recovery image thats doing the rounds doesn't want to play nice lol
If youre phone boots in to system, download Flashify from play, flash recovery.img (you need to extract .img file). Go to recovery to check if it works. If not try other recovery.
after flashing the community build i cant boot my device in fastboot mode, it wont start the recovery or boot the system sucessfully.
danxtian said:
Hi guys i flashed the 3.5.3 CM today but i decided to go back with 3.26 again, so i followed a guide that tells me to install stock recovery over twrp before i install the rom but after i fastboot flash the recovery i cannot go into the recovery anymore.
i tried to flashed the modified twrp and then boot to recovery but still wont open it.
the phone works and can go into fastboot still but it just wont access recovery
anyway to fix it? sorry if this has been discussed before. im on a mac for more info
TIA
Click to expand...
Click to collapse
If your device is unlocked, flash the recovery.img from fastboot.
You can download TWRP for oneplus 3 from their site.
Rename the downloaded recovery to recovery.img.
And open fastboot in the path of the recovery image.
Use the command:
Code:
fastboot flash recovery recovery.img
Hopefully this helps
g3ck08 said:
If your device is unlocked, flash the recovery.img from fastboot.
You can download TWRP for oneplus 3 from their site.
Rename the downloaded recovery to recovery.img.
And open fastboot in the path of the recovery image.
Use the command:
Code:
fastboot flash recovery recovery.img
Hopefully this helps
Click to expand...
Click to collapse
managed to fix it the other day, by flashing the modded twrp.. somehow that one worked after that i flashed the 3.26 plus the 3.26 modem ones because if i didnt, my touch screen wont work...
For me, I flashed the twrp from fastboot.
But still the 1+ logo shows when I try to boot in to recovery for 5 sec and shuts down with 2 dots of lights in the navigation button area
The normal boot is working fine. Did flash the recovery using apps like TWRP Manager, Flashify etc. It will show successfulll. But when I try to boot in to recovery, same result.
Please help