Develop Bugs

[CWM-Touch] Bootmenu for Defyxt-535

Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk

test it and reply the queries

Srika said:
test it and reply the queries
Click to expand...
Click to collapse
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Actually i have to try it on friends mobile., will reply aftr that !!!!.,

srijithn said:
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Click to expand...
Click to collapse
i have asked the mod to delete the thread as we have new cwm

Srika said:
Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk
Click to expand...
Click to collapse
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...

Hiro27 said:
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...
Click to expand...
Click to collapse
did you connect your phone to PC r not

Srika said:
did you connect your phone to PC r not
Click to expand...
Click to collapse
of course i did... i'm using stock Asia GB 2.3.7

Hiro27 said:
of course i did... i'm using stock Asia GB 2.3.7
Click to expand...
Click to collapse
hi but onething Touch CWM will not work with GB it only works with ICS

some issue
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?

k1000dubw said:
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?
Click to expand...
Click to collapse
when you connecting phone in camera mode just wait for some time till the phone drivers load then install the cwm try once

Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?

Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?

ferayn said:
Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?
Click to expand...
Click to collapse
r u in stock ics? r what?

Hiro27 said:
Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?
Click to expand...
Click to collapse
m8 b chances r there

I've tried to install 3 times, and all failed. twice bootloop, once succeeded but can't enter recovery and suddenly blackscreen in normal boot.

Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up

Why should it removed immediately? The one can't enter recovery mode and blackscreen in system boot, i thought it because the init.d support from Pimp my ROM (this time i use the beta release and i'm not sure with its init.d add options)

Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
I have noticed that the notifylight doesn't blink when received a new sms.
Sorry I'm not allowed to reply in your rom thread in dev board now.

ferayn said:
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up
Click to expand...
Click to collapse
If u r using my custom rom then the leds will light in d middle of boot animation

i like your rom
i like your rom and i'm waiting for your next rom~

[GUIDE][DS][For unlocking bootloader,rooting,CWM flashing And moving game to sd card]

Hey guys this is just a guide on how to Root,Unlock BL,Install Cwm Recovery and move game data to sd card on Xperia M Dual....this worked for me...I'am not Responsible for any Damage caused...
[/SIZE]
To enable Usb Debugging just go to
About phone>then click on build number 7 times and developer setting will be enabled
Firstly you unlock your BootLoader from this......
http://forum.xda-developers.com/showthread.php?t=2484622
I'am giving in short to unlock your BL easily..
Steps:
1. First, you should confirm that it is possible to unlock the boot loader of your device by checking the service menu. In your device, open the dialler and enter *#*#7378423#*#* to access the service menu.
2. In your device, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
3. open this website http://unlockbootloader.sonymobile.com/unlock/step1 and click yes till it shows to give ur details of name,imei,email address
4. now give the details and give imei which is only the first 14digits leave the last digit...give the valid email since u will get your code in mail...
5. now download the attachment C200X.rar then extract it to C:\Flashtool\devices\
Eg:it should be C:\Flashtool\devices\C200x
6.in flashtool click blu icon...
switch off ur phone...and connect usb wire to pc and with holding volume down connect the usb to phone...now u will see a green led blink on ur phone...
after sometime flashtool will show another window to unplug..now u should unplug ur phone from pc...and again hold volume up and connect to pc..this time the blue led will blink on ur phone.
8. now it will ask the code...copy the code in ur mail and paste ...
9. thats it ur phone gets unlocked and it will automatically reboot...reboot will take time..
Link to flash tool
http://www.flashtool.net/download.php
Link to C200X
https://www.dropbox.com/s/pwq2mccmnflczqo/C200X.rar
After Unlocking BL you have to flash Dhaval's Cwm
JUST FLASH VIA FASTBOOT IN FLASHTOOL
To boot in CWM recovery mode just switch off your mobile.....then start your mobile when the sony screen appears and the led turns pink push volume up buttons and the led will turn blue then you are in recovery mode..
Here is the link for Kernel+Cwm for C2004 or C2005
http://d-h.st/HB8
For rooting just flash the zip in CWM recovery and reboot your mobile and you are rooted..
Please Download the latest version...
Link:
download.chainfire.eu/supersu
Source:
http://forum.xda-developers.com/showthread.php?t=1538053
To move game data to your sd card just follow the steps given.....
There are two methods to move game data to sdcard..
First Method...
1.Download FolderMount from google play.
https://play.google.com/store/apps/details?id=com.devasque.fmount
and follow the steps given in the video........
https://www.youtube.com/watch?v=Oj35r8cDW2k
NOTE:That free version of Folder mount can only move 3 games.
Second Method....
1.Download gltosd from Google Play
https://play.google.com/store/apps/details?id=com.slf.ListglApp
just follow the steps in the video given below....
http://www.youtube.com/watch?v=0EDc-uhnI1U
CREDITS:
Engineer_dhaval: for Kernel + CWM Recovery(Thanks).
Ansebovi: for his guide to Unlock Bootloader(Thanks).
NUT:For his guide to move games data to sdcard(Thanks).
Unknown:for the video(Thanks).
Chainfire:For the Rooting Zip(Thanks).
Me:Guide to root the device.
Unknown: who made me know how to move game data to sd card(Thanks).
DON'T SAY THANKS HIT IT.

good job on creating guide for others

Thanks i will make the changes
Sent from my C2004 using Tapatalk 2

Done Bro..check...
I will Upload a Video Soon..
Thanks for your suggestion...
Sent from my C2004 using Tapatalk 2

Bootloader unlock : Yes
My xp M model is 1904 Before following the steps it showed Bootloader unlock : yes and after following the steps successfully it shows the same only thing happened is my phone got hard reset, have i unloacked my bootloader

If your phone gets hard reset you have unlocked your bootloader successfully...
Sent from my C1905 using Tapatalk 4

[GUIDE] Huawei Ascend Y300 IMEI Hack & Firmware update

WARNING: I WILL NOT BE RESPONSIBLE OF ANY FAULT THAT MAY OCCUR TO YOUR DEVICE. YOU`RE DOING THIS AT YOUR OWN RISK.
Okay so after you`ve accepted taking the risk, let`s start...​
So,i was spending alot of time trying to make The "OEMINFO-Hack-Tool-v1" to work, I discovered a Simple And way safer procedure...
MAKE SURE YOUR DEVICE IS ROOTED!( Or it won`t work )​
1. Download The App ( 5iromtoolbox ) in the attachment & install it in your rooted device...
NOTE: I recommend The "Kingo App" for rooting, its way quick and simple...
2. Click on IMEI backup...
3. After Its completion, connect your phone in MTP ( Media Transfer ) mode, browse to SDCARD
4. Copy the whole folder somewhere in your PC ( Backups are Always Important )...
5. Now, browse to SDCARD/5irom/imeibackup/ and click copy on the file "5.img"
6. Back to SDCARD ( root ), Create a folder named "OEMINFO-BACKUP" & paste "5.img" file in there...
7. Open Up "OEMINFO-Hack-Tool" folder & run "2-oeminfo-hack-windows"...( This time it should Be successful, if u had troubles...)
NOTE: If it says "ADB/Shell denied superuser access", Change your superuser App to SuperSU...
8. After completion, Copy the "Dload" folder of your firmware to the SDCARD & and Turn off your device...
9. Hold "Volume up + Volume Down", then hold the power button ( The Firmware Update process Will start )...
10. After Completion the device will Boot up, But!, Unrooted... ( If your dial *#06# you`ll notice a Blank IMEI )
11. To fix that, Root the Device ( Kingo App recommended) & install the "5iromtoolbox" app again...
12. Go to your "file manager" app and Copy the "5irom" folder to the "internal storage"...
13. Launch "5iromtoolbox" and restore your IMEI...
14. After Completion, RESTART! the device, ( It will do a Hard Reset )
15. After Reboot, Dial *#06#, this time the IMEI would be back to Original....
AND THATS ALMOST IT!
HIT THANKS IF THIS HELPED YOU.​

hello
after using your method i get stuck on blue screen and the phone wont boot into recovery or fastboot, so i tried flashing the original rom trough download mode but it gets stuck on around 50%, any ideas on how to fix it? i could really use some help here, my phones like this for about a month and i googled everything, nothing seems to work so far

androidnoob2212 said:
after using your method i get stuck on blue screen and the phone wont boot into recovery or fastboot, so i tried flashing the original rom trough download mode but it gets stuck on around 50%, any ideas on how to fix it? i could really use some help here, my phones like this for about a month and i googled everything, nothing seems to work so far
Click to expand...
Click to collapse
did you follow the procedures well?
was your phone rooted?
is it a Y300?
where were you in the steps until the error occured?
try to find ways to unbrick your device, because thats seems to be whats going on...
ps: I don`t really use the device no more, so it be pretty hard to help you with that.

ill probably send it to service but thanks
fastboot doesnt work, twrp is gone, only accesible mode is download mode
my phone is a rooted huawei y300(EU) with twrp recovery and a oficial rom, it failed after the step where i have to reboot, i can read the imei using dc unlock and its not 0 or my original imei, and i think that might be the issue, idk where i messed up, tried using dsf cdma tool but dont really know how to use it and the tutorials out there on the web dont work for me, anyways thanks for the reply
ps. i got a new one to but its a waste to just let it collect dust

[HELP] Updating to 4.3

Guys I've been trying to update my c1904 to 15.4.a.1.9 but the Sony pc companion is always stuck at "Downloading". Now i think my only hope will be to flash the ftf directly. But am really scared to do it and don't understand the procedure clearly. I have read different threads but still not clear. Can anybody please tell me if flashtool is safe, give me a link of flashtool and latest 4.3 firmware and Point to some guide which is easily understable.
Also one important doubt is it necessary to Uninstaller pc companion when using flashtool
Many thanks in advance

Hello my dear friend , it's may be you have done some changes to your (e.g unlocking your boot-loader) phone. So , PC Companion doesn't work for you .
And Flashtool is totally safe.So here are the steps -
1. Download .FTF file to your PC
2. reboot your phone into flash mode ( while plugging cable from your PC , hold down volume down button )
3. then in flashtool click on flash ( Lightning symbol) button
4. select flashmod
5. and then select your ftf in directory
6. just hit the flash button
7. enjoy with the new update
Caution :- You'll lose your data,apps or whatever that's in internal storage. So better backup first
.FTF --- http://forum.xda-developers.com/showthread.php?t=2524800
Please hit THANKS if it helps you

XDAOwner!! said:
Hello my dear friend , it's may be you have done some changes to your (e.g unlocking your boot-loader) phone. So , PC Companion doesn't work for you .
And Flashtool is totally safe.So here are the steps -
1. Download .FTF file to your PC
2. reboot your phone into flash mode ( while plugging cable from your PC , hold down volume down button )
3. then in flashtool click on flash ( Lightning symbol) button
4. select flashmod
5. and then select your ftf in directory
6. just hit the flash button
7. enjoy with the new update
Caution :- You'll lose your data,apps or whatever that's in internal storage. So better backup first
.FTF --- http://forum.xda-developers.com/showthread.php?t=2524800
Please hit THANKS if it helps you
Click to expand...
Click to collapse
thanks dude helped me alot

XDAOwner!! said:
Hello my dear friend , it's may be you have done some changes to your (e.g unlocking your boot-loader) phone. So , PC Companion doesn't work for you .
And Flashtool is totally safe.So here are the steps -
1. Download .FTF file to your PC
2. reboot your phone into flash mode ( while plugging cable from your PC , hold down volume down button )
3. then in flashtool click on flash ( Lightning symbol) button
4. select flashmod
5. and then select your ftf in directory
6. just hit the flash button
7. enjoy with the new update
Caution :- You'll lose your data,apps or whatever that's in internal storage. So better backup first
.FTF --- http://forum.xda-developers.com/showthread.php?t=2524800
Please hit THANKS if it helps you
Click to expand...
Click to collapse
Really thanks bro, much appreciated
Everything worked fine as it should and now am sporting cm which i must add is at least 100x better than Sony stock
Perfectly satisfied
Thanks to devs and people like you who are willing to help
And last but not the least may God bless you and your family [emoji1]

Us 20161107 rom

https://mega.nz/#!ysUGgKBL!2i6zO1PdP-wdG_cCY58HOat7tVIzMxr-NZ1Z1tlvT8U
You lose Baseband, so I need help!
EDIT: Format All + Download will get right Baseband.
Now I learnt that the blue trash can icon is linked with the agold.x.x. in the systemui.apk, can someone more knowledgable then me create a patch or something to remove it? Thx.
Tutorial!
Resources:
Maui META
SP Flash Tool
ROM
TWRP
Step 1
Load ROM into SP Flash Tool
Unpack the Package FIles ZIP
Select the lk.bin for the 2 lk files
Select logo.bin for logo.bin
Select TWRP for Recovery
Select Format All + Download
Connect Phone: I did by pressing Vol Up and connecting Type C
Wait till download finishes
Unplug phone
Launch Maui META
Press Reconnect button
Plug Phone in (I did by pressing Vol Up and connecting Type C)
Wait till IMEI interface pops up
Select Change NV Database File
Choose the MDDB_InfoCustomAppSrcP_MT6755_S00_MOLY_LR11_W1539_MD_MP_V9_P15.EDB FIle
Type Imei
Select Download.
Press Disconnect on 1st Interface.
Unplug phone.
Flash Same ROM
Boot.
Power Off
Boot into Recovery (Vol Up + Power)
Do what ever you want.
I do recommend my process, if you want to save time and your sanity.
@skeleton1911 or @Deepflex?

Hello
Screenshot?

Deepflex said:
Hello
Screenshot?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B5ZXRIpl-Z6vbU1wcXcwRXVUVlk/view?usp=drivesdk

Ninja X said:
https://mega.nz/#!ysUGgKBL!2i6zO1PdP-wdG_cCY58HOat7tVIzMxr-NZ1Z1tlvT8U
You lose Baseband, so I need help!
EDIT: Format All + Download will get right Baseband.
Now I learnt that the blue trash can icon is linked with the agold.x.x. in the systemui.apk, can someone more knowledgable then me create a patch or something to remove it? Thx.
Tutorial!
Resources:
Maui META
SP Flash Tool
ROM
TWRP
Step 1
Load ROM into SP Flash Tool
Unpack the Package FIles ZIP
Select the lk.bin for the 2 lk files
Select logo.bin for logo.bin
Select TWRP for Recovery
Select Format All + Download
Connect Phone: I did by pressing Vol Up and connecting Type C
Wait till download finishes
Unplug phone
Launch Maui META
Press Reconnect button
Plug Phone in (I did by pressing Vol Up and connecting Type C)
Wait till IMEI interface pops up
Select Change NV Database File
Choose the MDDB_InfoCustomAppSrcP_MT6755_S00_MOLY_LR11_W1539_MD_MP_V9_P15.EDB FIle
Type Imei
Select Download.
Press Disconnect on 1st Interface.
Unplug phone.
Flash Same ROM
Boot.
Power Off
Boot into Recovery (Vol Up + Power)
Do what ever you want.
I do recommend my process, if you want to save time and your sanity.
@skeleton1911 or @Deepflex?
Click to expand...
Click to collapse
i could try to find what controlls the trash can and make a patch, ill see if i find anything, ill report back results tomorrow

Ruben Craveiro said:
i could try to find what controlls the trash can and make a patch, ill see if i find anything, ill report back results tomorrow
Click to expand...
Click to collapse
Thanks. Sound excellent. From what I learnt, the agold blah blah controls the recent and the trash can. I can resize the trash files to 1px by 1px, but the height of the overlay remains. Anyway, I'm a noob so i have no idea, let me know when you've got something. Thanks.

Ruben Craveiro said:
i could try to find what controlls the trash can and make a patch, ill see if i find anything, ill report back results tomorrow
Click to expand...
Click to collapse
How's it going?

Ninja X said:
How's it going?
Click to expand...
Click to collapse
i kinda forgot about it, and now im on lineageos 14.1 and i have no intentions of going back, so i wont make any patch, sry

Ruben Craveiro said:
i kinda forgot about it, and now im on lineageos 14.1 and i have no intentions of going back, so i wont make any patch, sry
Click to expand...
Click to collapse
:crying: Ok