Related
hi i have used evo3 on my htc desire to root and then used alpharev and boht said succussfull. Now phone starts and only shoes joker and written why so serious? doesnt go further at all. any help please
Regards
got a bootloop.. try running an RUU file (this will flash back to stack, get rid of root)
then try to root again, just a different method?
hope this helps!
how to flash with ruu if your phone is stuck not even being detected by PC. any detail please thanks regards
faisal_sherry said:
how to flash with ruu if your phone is stuck not even being detected by PC. any detail please thanks regards
Click to expand...
Click to collapse
First of all: be sure you know what you're doing. The below listed solutions might help but might also end up bricking your phone dead.
If you can enter fastboot (back while powering on the phone) and if you have a nandroid backup, you can try to flash it back using the fastboot flash command.
OR
It's possible to run the RUU update while in fastboot or hboot usb mode (back button while powering on the phone) I had the modified usb drivers installed http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install, not sure if that is needed - but the original drivers didn't work very well with my setup in general: Win7 x64 , also I uninstalled HTC Sync.
OR
If that fails, you can try to extract the rom.zip from the RUU and flash it manually (help on extracting http://lukasz.szmit.eu/2010/04/extracting-rom-files-from-htc-android.html ) JUST DON'T USE THE ROM FROM THAT TUTORIAL, THE LINK IS JUST FOR REFERENCE ON HOW TO EXTRACT THE rom.zip
The offcial RUU are in this thread, just BE SURE TO USE THE CORRECT ONE http://forum.xda-developers.com/showthread.php?t=695667
Code:
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip rom.zip
@quanchi, thanks for your help i'll try and let you know tomorrow thanks again
Regards
hi i have tried the method putting phone in fastboot mode pressing back and power phone was detected and then flashed with this rom 'RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.06.00.02_2_release_127570_signed'' and it was successufll now my phone is not turning on when i press power it vibrates but nothing on the screen but good thing is when i connect the phone with pc it still detects it its not brick yet i think any help
Regards
faisal_sherry said:
hi i have tried the method putting phone in fastboot mode pressing back and power phone was detected and then flashed with this rom 'RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.06.00.02_2_release_127570_signed'' and it was successufll now my phone is not turning on when i press power it vibrates but nothing on the screen but good thing is when i connect the phone with pc it still detects it its not brick yet i think any help
Regards
Click to expand...
Click to collapse
Is your phone SLCD? I reckon you may have flashed an incorrect RUU, in which case you'll need to get a more up-to-date one and flash it again. In case that's the most recent one for T-Mobile, you'll need to make a gold card and then flash a generic RUU. Hope that helps.
hi thanks for your reply i don't know what is slcd? and let me tell you the stat of the phone now
when i press power phone vibrates i can see button lights on the phone but nothing on the lcd screed. Phone is not going in boot mode when i press back and power nothing happens, volume up and power nothing happens. Phone is being recognized in device manager as a usb mass storage and i can see battery light on the top of the screen as well. I dont know what is the real state of my phone and what do you call it but its a t mobile UK phone that's what i know and what should i do now thanks
Regards
SLCD is a type of display present in some Desires, earliest Desires had an AMOLED display. You most probably flashed your SLCD Desire with RUU prepared for an AMOLED Desire, hence the display problems. Search the forum for "SLCD BRICK". Your phone should be able to enter fastboot/hboot, but doesn't display anything because the display handling is screwed up. Before trying to resolve your situation BE SURE TO READ ALL THE INFO ON SLCD UNBRICKING.
I have no experience with SLCD models so can't help you much on the subject, but there are numerous threads on xda detailing dealing with this particular issue.
I don't want to sound rude or holier than thou (as I had my share of bricks and semi bricks) but I did write that you should make sure you get the correct RRU...
best of luck
Sent from my HTC Desire using XDA App
hi thanks for your reply i'll try n post the result here
Regards
So here I will describe what I did to solve the exact same issue.
Remove the battery from the phone
Copy the proper RUU file to the root of my SD card naming it PB99IMG.zip
Insert battery
Power on phone holding the power and the back buttons until the fastboot menu opens
Choose recovery
Then it will go through a bunch of stuff and ask you if you want to flash the file you put on the SD card, I said yes then a few minutes later Bobs your uncle I was back to factory.
faisal_sherry said:
hi thanks for your reply i'll try n post the result here
Regards
Click to expand...
Click to collapse
Faisal, it seems apparent that your device is an SLCD Desire. When you put Alpharev on it, it did S-OFF and your boot got corrupted for some reason and looped. When you ran the RUU (which was incompatible for your SLCD, and actually meant for an AMOLED Desire), you effectively unrooted it, though not restoring it.
Check my thread for a similiar problem.
If you had made a Goldcard earlier, you're in luck. You can restore your device with a generic SLCD RUU available for your device, by either running the RUU or by flashing the rom.zip from the RUU.exe file (Tip. This file gets extracted to %TEMP% folder when you run an RUU)
Things you need to know before you try solving your problem:
Know how to use adb from the command prompt,
Search for the links to shipped-roms site containing the list of Bravo (Desire) ROMS
How to create and use a goldcard
How to navigate to the temporary folder of your Windows PC
How to turn your device on into Recovery mode and Fastboot without seeing the screen
Simple search on XDA can unravel these simple mysteries.
Now, the steps to go about solving your problem:
Find out if you have a generic unbranded HTC Desire, or a branded one. A branded Desire has a special Code which prevents you from flashing a ROM meant for any other brand and also blocks a Generic RUU. If you're from India, it is branded with HTC Asia_India. If you're unbranded, things are looking much easier for you, as generic RUUs for SLCD are easily available.
Check if you have a goldcard (A goldcard is a special microsd card you made while your device was in working condition. It will allow you to restore your device using a generic RUU or an OTA)
If you dont have a goldcard, you might try to see if Recovery can be booted up. Poweroff phone, then power it on by pressing Vol- and Poweron key, then wait 30sec and press Vol Down and Poweron button again. At this time, phone gets detected in Windows (as shown by the icon in the bottom right of taskbar and a notification sound.
Type:
Code:
adb devices
If this displays a code SH**** after "List of devices", you're in luck. You can issue an adb command and get a CID of your device, following which you can create a goldcard.
After creating a goldcard, it will allow you to run a generic SLCD RUU. Check my thread for a latest RUU.
If you dont have a goldcard, and adb doesnt show the device in Recovery mode, it means Recovery is corrupted too. In this case, Power off device. Then Poweron by pressing Back key and Power on key. Again try adb devices command. If it shows the device, follow the steps of previous step.
You can also create a goldcard by putting your microsd card into a friend's phone and following the steps needed to create a gold card
If adb doesnt show your device in either Fastboot (previous step) or in Recovery, then you're in trouble. The only way to unbrick your softbricked device is to get a Generic RUU for your device (Check shipped roms site, or search XDA), and flash it. There is also a method if you have the original OTA zip for your device. Check teppic74's posts on XDA for this method.
If you have an Indian Desire, you're done for as I found out. If you dont have a goldcard for an Indian Desire, or the OTA zip, you have no option than to return it to HTC. Dont worry about Warranty being lost if it is a new phone. HTC has to repair it according to their Warranty policy.
Goodluck. I've summarized all methods available to unbrick an SLCD. For more details on any one method, try searching with the appropriate keywords from my post. It's all on XDA.
@droidzone, hi thanks for your time and reply here. the thing is i am very very basic user. Can you please tell me do i have to install htc sync first and i dont have any gold card before rooting. after following this procedure
"switch off phone. press and hold volume down. press power. release volume down after 5 seconds. wait for 30 seconds. press volume down. press power. the phone should vibrate. wait 40 seconds. the phone should be in recovery."
pc detects the phone but when i run ruu it doesn't find the phone and i have OTA downloaded as well and i have copied to micro sd but i dont know how to use this OTA. i'm sorry for being very basic
Regards
faisal_sherry said:
@droidzone, hi thanks for your time and reply here. the thing is i am very very basic user. Can you please tell me do i have to install htc sync first and i dont have any gold card before rooting. after following this procedure
"switch off phone. press and hold volume down. press power. release volume down after 5 seconds. wait for 30 seconds. press volume down. press power. the phone should vibrate. wait 40 seconds. the phone should be in recovery."
pc detects the phone but when i run ruu it doesn't find the phone and i have OTA downloaded as well and i have copied to micro sd but i dont know how to use this OTA. i'm sorry for being very basic
Regards
Click to expand...
Click to collapse
@Faisal,
No prob. Everyone is a newbie at the beginning!
But, you need to search and find out some things on XDA, and there are a lot of newbie centric guides over here which explain procedures step by step..
You need to do these by yourself though:
1. Install Android SDK. It just involves downloading the setup file, running it, and finding out where in Windows it has been installed. In the main installation folder, there is a Folder called Tools. You need to open a command prompt in that folder and run adb.exe for most of the procedures. Follow this guide to install the SDK.
2. After you have the sdk installed, boot your phone into recovery using the procedure you quoted. As you said, the phone will be detected in Windows. At this point, run the following command from a command prompt in your tools folder.
Code:
adb devices
This will output "List of devices" followed by a code starting with SH. If it does, you're in luck. You can now create a goldcard, and proceed. Follow this guide for this.
3. If the "adb devices" does not show any devices (in recovery/Boot mode), and you dont have a goldcard, you've run out of luck, pal. Honestly, no one on any forum has solved the issue with this combo.
There would still be a solution, if you have the RUU. I dont see why your RUU does not run. Try to run it in one of the following modes.
a. Switch off phone
Switch it on by pressing Back key followed by Back+Power key, then slowly releasing Powerkey while keeping Back key. This is the bootloader mode.
b. Recovery mode. Power off, power on by Vol down + Power key, then slowly release Power key. After 30 sec, press Vol down once, then power key once. Wait 1 min and see if pc detects device. Else press power key once again.
In either of these modes, the RUU you downloaded should down. If it is the incorrect RUU for your location, it will give a customer id error. If it has an incorrect bootloader version, it will show a Bootloader version error. In either of these cases, try the newest generic SLCD RUU from shipped roms. If this still gives one of the above errors, your phone is a branded phone. In this case, you WILL NEED a gold card to work.
Note that if adb devices shows your phone, then you can create a goldcard at this point.
If adb does not show your devices, and the latest generic RUU does not run, and you cant find a correct RUU for your device, then tough luck. I am yet to find a solution to this problem. Return it to HTC.
faisal_sherry said:
@droidzone, hi thanks for your time and reply here. the thing is i am very very basic user. Can you please tell me do i have to install htc sync first and i dont have any gold card before rooting. after following this procedure
Click to expand...
Click to collapse
Yes, you need to have HTC sync installed for the drivers. But the HTC sync main program should not remain in the system tray (bottom right). If it is, close it by rightclicking and Exiting.
The problem with what devin mm said is that an SLCD desire doesnt show anything on screen if bricked. Yet, recovery may be selectable for some, without seeing anything. But if you ran the RUU, then most probably the recovery itself is corrupted and selecting a zip file on memory card wont be possible at this point.
Sorry that I wont be able to follow this thread for the next few days. I'm travelling, and since my Desire is with HTC repair centre, no Net. Hopefully, someone else on XDA can help out with any more qns..
Acer Iconia a100
i Bricked it, it sits at the acer screen. no signs of loading. It responds to all of the vol + power +
scape combinations. I get bootloader error when i try that combination, the sd update just hangs there i
grabbed flexreaver rom and renamed it update with the file type being a zip and still no cigar.
I wanted to run the fastest most bare rom as possible i think the problem was that i did NOT have the
bootloader unlocked. I tried one idea where you run somekind of batch file and on my tab itself it
stated that the bootloader was NOT unlocked. i have no idea where to go from here. When i go into usb
mode or db it does not connect with the computer i cannot see or add or remvoe file, but i can connect
with msdos to run batches.
I have spent hours looking for a solution and found help only in outdated links, foriegn languages
and a500 tutorials. I have an acer A100. Any help offered to me is much appreciated but if you are going
to help me please be thorough and leave me alot of details please, i do not have the understanding
or the command it takes to successfully unbrick my tablet. So.. Any ideas?
kungfaux17 said:
Acer Iconia a100
i Bricked it, it sits at the acer screen. no signs of loading. It responds to all of the vol + power +
scape combinations. I get bootloader error when i try that combination, the sd update just hangs there i
grabbed flexreaver rom and renamed it update with the file type being a zip and still no cigar.
I wanted to run the fastest most bare rom as possible i think the problem was that i did NOT have the
bootloader unlocked. I tried one idea where you run somekind of batch file and on my tab itself it
stated that the bootloader was NOT unlocked. i have no idea where to go from here. When i go into usb
mode or db it does not connect with the computer i cannot see or add or remvoe file, but i can connect
with msdos to run batches.
I have spent hours looking for a solution and found help only in outdated links, foriegn languages
and a500 tutorials. I have an acer A100. Any help offered to me is much appreciated but if you are going
to help me please be thorough and leave me alot of details please, i do not have the understanding
or the command it takes to successfully unbrick my tablet. So.. Any ideas?
Click to expand...
Click to collapse
I think we need a lot more information in a clear manner.
From the beginning, what did you do? Do you have ICS or HC? Rooted? Did you try to unlock the boot loader? Try to install a recovery?
What batch file did you run, what was it for?
At what point in all of those answers did it stop booting?
Have you hard reset?
You say the computer can not see it but say you can run batch files on it, which is it? Are they seeing it or just running anyways? What boot loader version does it say in the upper left corner?
All if this information provided clearly will tell us exactly where you stand and if it can be corrected.
Tapatalked from my Galaxy S II.
boot loader v0.03.06-ics:starting fastboot usb download..
I had the tablet rooted and i had not updated to the OTA update.
i have only tried the vol+power combos and i tried to rename a rom to update.zip so i could do that update reboot thing and it just hangs..i tried a pin the reset hole still nothing..
i had tried zeronulls bootloader unlock at that point was when my tablet bricked.. since then ive tried to run fastboot_recovery but it doesnt work. i can connect my device with usb and it will respond to certain batches acer a100 unbrick (a100-recovery-win/a100-push-tools) but i cannot access any of the files on the sd card through my computer.
kungfaux17 said:
boot loader v0.03.06-ics:starting fastboot usb download..
I had the tablet rooted and i had not updated to the OTA update.
i have only tried the vol+power combos and i tried to rename a rom to update.zip so i could do that update reboot thing and it just hangs..i tried a pin the reset hole still nothing..
i had tried zeronulls bootloader unlock at that point was when my tablet bricked.. since then ive tried to run fastboot_recovery but it doesnt work. i can connect my device with usb and it will respond to certain batches acer a100 unbrick (a100-recovery-win/a100-push-tools) but i cannot access any of the files on the sd card through my computer.
Click to expand...
Click to collapse
Go to where it says download protocal then in the folder with adb and fast boot from those zips you downloaded open a command prompt, CD to that folder then type
fastboot oem unlock then get ready for the volume keys.
You missed the unlock that's probably why it got jammed up.
So....find the folder you unzipped the boot loader unlock stuff to, copy it to c:\unlock
Open a command prompt, type
cd c:\unlock
Then type
fastboot oem unlock
Place one hand on the tab so you have a finger on each volume button
Hit enter
On the tab press volume up then volume down (furthest from lock switch then closest to lock switch) as soon as the unlock screen comes up.
Gotta be quick if you miss it try again.
Tapatalked from my Galaxy S II.
ha! youre amazing!.. i got it.. ok, now then it still hangs at the acer screen but now it says bootloader version 0.03.06-ics (unlock mode)
what do i do next?
kungfaux17 said:
ha! youre amazing!.. i got it.. ok, now then it still hangs at the acer screen but now it says bootloader version 0.03.06-ics (unlock mode)
what do i do next?
Click to expand...
Click to collapse
Maybe hard reset or just install a custom recovery and then install a custom rom or something lol limitless possibilities now.
Tapatalked from my Galaxy S II.
Acer A100 BRICK NEED ADVICE
marvz_tech said:
Acer A100 BRICK NEED ADVICE
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=27938361
Brick thread, good place to browse.
Tapatalked from my HTC DNA - ReVolt
Hi everybody.
first of all Ty all for checking out my post.
I have HTC ONE X Terga 3 (cid_K18) for the last 2 days i tried to find an answer to my problem without ant success to found right Q&A that fits to my problem i decided to open this help post.
3 days ago i rooted my HTC one x with hasoon2000 guide everything was good and i was happy and the day after i was driving to my work place using WAZE and also my phone were connected to car charger and suddenly my phone just crashed and wont turn one since.
few notes:
- no led at all
- i was and popup on my phone that saying something about "mksh" and i clicked allow
-tried to leave it one night with out charging
-tried to charge the phone with other charger
-tried power button for 10sec
-tried power button + vol down
nothing helped
hope u guys will can help me to find out this problem
When you said you tried power and vol down did u keep them pressed ? it should reset and take you to bootloader menu.
Maybe try different charger/usb cable?
NO TITLE
yeah i did what u said and just nothing
and no power led to any led at all
anyone? im really hopless
Hmm if you can't turn it on in any way there is not much we can do.
You can try this
Connect the phone to the pc and open a command window in the fasrboot folder and type
Adb reboot bootloader
And check if its recognized anywhere on the pc ?
wirth my the right cmd path for this pls
hmm you used the toolkit.....well drivers are installed then, check inside the folder of hassoons toolkit (or do a search in that folder) for the fastboot.exe file. hold shift down and click the right mouse button. select open command window here and type :
adb reboot bootloader
maybe it reacts
deivce not found...
i installed the drivres
but stil error
deivce not found...
Then there is not much i can do
dammit ok ty anyway
anyone else?
Hi, I know there are a lot of other similar threads but none of them have solved my problem.
I ingeniously decided to try upgrading an old Desire HD to Jelly Bean to use while I'm waiting for a new phone that I actually want to be released. I followed the instructions here: http://forum.xda-developers.com/showthread.php?t=2221039 successfully until this part:
7.If this is all fine boot into bootloader again.
From bootloader go to fastboot.
Go back to the cmd window on your PC from earlier, type in:
•Fastboot oem lock
Then type:
•fastboot oem rebootRUU
•fastboot flash zip firmware.zip
•fastboot reboot-bootloader
unlock the bootloader again using the Unlock_code.bin you got from HTC:
•fastboot flash unlocktoken Unlock_code.bin
Click to expand...
Click to collapse
After I ran "fastboot flash unlocktoken Unlock_code.bin" my phone restarted and now it's stuck on the htc logo. I'm unable to get into the the bootloader by holding volume down while powering the device (though I was having this problem before starting the root process, instead I was using "adb reboot-bootloader" to get into it). I've also tried to leave the battery out for a while. It's not being detected by HTCSync or "adb devices" either.
Anyone have any solutions to this problem? I'm a complete Android noob so please keep it simple (though I have experience with UNIX and the command-line).
konungr said:
Hi, I know there are a lot of other similar threads but none of them have solved my problem.
I ingeniously decided to try upgrading an old Desire HD to Jelly Bean to use while I'm waiting for a new phone that I actually want to be released. I followed the instructions here: http://forum.xda-developers.com/showthread.php?t=2221039 successfully until this part:
After I ran "fastboot flash unlocktoken Unlock_code.bin" my phone restarted and now it's stuck on the htc logo. I'm unable to get into the the bootloader by holding volume down while powering the device (though I was having this problem before starting the root process, instead I was using "adb reboot-bootloader" to get into it). I've also tried to leave the battery out for a while. It's not being detected by HTCSync or "adb devices" either.
Anyone have any solutions to this problem? I'm a complete Android noob so please keep it simple (though I have experience with UNIX and the command-line).
Click to expand...
Click to collapse
stuck in the same place... before unlocking bootloader pc would recognise the phone. now it doesn't... i think were stuck unless a developer helps us
Hmm, remove and reinsert the battery, and plug it into a computer, don't power the phone on, wait and see if the computer detects it, if it does, try "adb devices" to see if it shows up.
Sent from my Desire HD using Tapatalk 4 Beta
humzaahmed155 said:
Hmm, remove and reinsert the battery, and plug it into a computer, don't power the phone on, wait and see if the computer detects it, if it does, try "adb devices" to see if it shows up.
Sent from my Desire HD using Tapatalk 4 Beta
Click to expand...
Click to collapse
Windows detects an "Android Phone" in Devices but "adb devices" is still empty.
konungr said:
Hi, I know there are a lot of other similar threads but none of them have solved my problem.
I ingeniously decided to try upgrading an old Desire HD to Jelly Bean to use while I'm waiting for a new phone that I actually want to be released. I followed the instructions here: http://forum.xda-developers.com/showthread.php?t=2221039 successfully until this part:
After I ran "fastboot flash unlocktoken Unlock_code.bin" my phone restarted and now it's stuck on the htc logo. I'm unable to get into the the bootloader by holding volume down while powering the device (though I was having this problem before starting the root process, instead I was using "adb reboot-bootloader" to get into it). I've also tried to leave the battery out for a while. It's not being detected by HTCSync or "adb devices" either.
Anyone have any solutions to this problem? I'm a complete Android noob so please keep it simple (though I have experience with UNIX and the command-line).
Click to expand...
Click to collapse
i had the same problem but fixed now. The way i did this was to actually take out the hardware for the volume rocker and check if the contacts are all in place. i then booted into bootloader by connecting my phone to a power source (computer or ac) and pressed the volume down button so that it registered. For some reason it seems to register you clicking the button better when its out of the key. Sorry if you don't understand this, I really don't know how to explain the rocker and the keys separately 0_o
Some times guys the firmware.zip file once flash does get stuck on the HTC White screen during the exploit just run ADB and continue with the unlocking of your radio. Its safe.
IBeKay said:
i had the same problem but fixed now. The way i did this was to actually take out the hardware for the volume rocker and check if the contacts are all in place. i then booted into bootloader by connecting my phone to a power source (computer or ac) and pressed the volume down button so that it registered. For some reason it seems to register you clicking the button better when its out of the key. Sorry if you don't understand this, I really don't know how to explain the rocker and the keys separately 0_o
Click to expand...
Click to collapse
Wooh!!! It worked !!! Thank you very much!!!
For future reference, this is how what I did to complete the root process:
1. Pull off the battery cover, take out the battery.
2. Rip off the label with IMEI and S/N and then use a toothpick or plastic tweezers to pull out the ribbon cable from the volume rocker (see video here: youtube[dotcom]/watch?v=JfatoeWbMRk&feature=player_detailpage&t=143)
3. Press the volume down button on the cable a few times to make sure it clicks then clean the inside of the volume rocker a bit, put the cable back in, and press volume down a few times to test it.
4. Put the battery back in, connect the USB to your computer, hold volume down and press the power button so that it goes into the bootloader.
5. Go into fastboot and continue the rest of the steps from the guide.
Note: if adb doesn't detect your phone then reboot it and enable USB debugging again in Settings > Applications > Development and then reboot into the bootloader.
Thanks to everyone that helped ! :good:
konungr said:
Wooh!!! It worked !!! Thank you very much!!!
For future reference, this is how what I did to complete the root process:
1. Pull off the battery cover, take out the battery.
2. Rip off the label with IMEI and S/N and then use a toothpick or plastic tweezers to pull out the ribbon cable from the volume rocker (see video here: youtube[dotcom]/watch?v=JfatoeWbMRk&feature=player_detailpage&t=143)
3. Press the volume down button on the cable a few times to make sure it clicks then clean the inside of the volume rocker a bit, put the cable back in, and press volume down a few times to test it.
4. Put the battery back in, connect the USB to your computer, hold volume down and press the power button so that it goes into the bootloader.
5. Go into fastboot and continue the rest of the steps from the guide.
Note: if adb doesn't detect your phone then reboot it and enable USB debugging again in Settings > Applications > Development and then reboot into the bootloader.
Thanks to everyone that helped ! :good:
Click to expand...
Click to collapse
glad I helped
konungr said:
Hi, I know there are a lot of other similar threads but none of them have solved my problem.
I ingeniously decided to try upgrading an old Desire HD to Jelly Bean to use while I'm waiting for a new phone that I actually want to be released. I followed the instructions here: http://forum.xda-developers.com/showthread.php?t=2221039 successfully until this part:
After I ran "fastboot flash unlocktoken Unlock_code.bin" my phone restarted and now it's stuck on the htc logo. I'm unable to get into the the bootloader by holding volume down while powering the device (though I was having this problem before starting the root process, instead I was using "adb reboot-bootloader" to get into it). I've also tried to leave the battery out for a while. It's not being detected by HTCSync or "adb devices" either.
Anyone have any solutions to this problem? I'm a complete Android noob so please keep it simple (though I have experience with UNIX and the command-line).
Click to expand...
Click to collapse
Hi
I have followed your all steps perfectly... after done i have reboot my desire hd it shows htc screen and goes to qualcom mode...plz tell what should i've to do now
Guys
I have tried all the mentioned ways in this site to flash my system but i am no where..
My issue starts with unlocking bootloader, when ever i try to unlock it using windroid or cmd commands or htc dev the phone reboots to a black screen and at the bottom says fastboot mode and just stucks there for a while till cmd says faild to get keys or something like it ..
And the phone keeps it at that screen until i power it down, i have all the drivers installed the right way and adb drivers as will and cant get the phone to unlock bootloader.
Any solutions please..
Hello moh.naser. Have you tried doing thjs from the official Htcdev site ? Because all information about doing this are listed there in 6 steps..As you mentioned you have installed all drivers with the appropriate way,but check again 1st if your device is compatible 2nd if you wrote the token right and 3rd if you pressed the yes option to unlock the bootloader..Pls let me know