(I am 14 years old so I hope you understand that I could be missing something quite obvious)
Ok, So last night I was looking for a good rom and stumbled upon Synergy, for those of you who don't know the rom is pretty old and the download links aren't working anymore thanks to SOPA (I think it was SOPA). Well, back on topic, I found these links:
I loved this ROM! I had the zips of Synergy RLS1 and Godmode on my laptop. Direct download links below.
Synergy RLS-1 Supersonic
RLS-1 + Godmode Supersonic
Carousel+Widgets
Click to expand...
Click to collapse
Posted by a member named alxrock. I assumed these were legitimate mirrors, even though they had no MD5 Checksum since the next post, by jamieg71 stated:
You freaking rock!
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
So after downloading the Non-godmode ROM, I flashed it normally using Amon Ra, and installed no custom kernels, and becuase I have learned the consequences of not wiping I used both Calkulin's and Virus' superwipes. I read that it can take up to half an hour for the rom to settle and set up the SD card from the splash, so I left it plugged in while I was sleeping, this morning after about 10 hours it was still stuck on the splash.
I did several battery pulls before posting this thread and flashed back to stock via bootloader just to make sure my phone wasn't a brick.
Can someone point me in the proper direction?
Thanks!,
Wulfre
I really sorry for bumping but I want to flash this rom so badly and I cant get into the actual device, just up to the splash.
Has anyone had this problem before or has fixed it before?
What H boot?, and did u partition ur SD card ahead of time?
Sent from my Synergized Aggressive Lionfish Evo using the XDA app
Revolutionary S-OFF
HBoot-6.16.1002
I'm not sure how to partition the SD card so that may be the problem.
First back up your sdcard on your computer. Partitioning will erase your entire sdcard. You stated you were using amon ra. Go into recovery and you will see an option to partition your sd card from there. Then replace the files you backed up from your computer to your sdcard. Reflash synergy.
Sent from my PC36100 using Tapatalk
Ill tell you what happens in a few minutes, thanks for the help!
EDIT: Is there a specific size I need to partition? I have 16GB
I wouldn't go bigger than 1gb
Sent from my PC36100 using Tapatalk
I put 512mb, is that too much?
No that's good.
Sent from my PC36100 using Tapatalk
Alright, It's flashing now, I really hope this works
Super Happy Fun Time
It worked!
I wish I could give you 100 thanks!
No problem. Enjoy!
Sent from my PC36100 using Tapatalk
Related
i was doing fine for about a month now( i'm new) and recently i just flashed from cm6 to bakedsnack1.0 the past week my phone was showing the low storage on device and was running really slow. response times were about 4 seconds per digit dialed for a telephone number.
so i tried to reflash that rom. unfortunately it got stuck in a bootloop. so i proceeded in reflahsing kernals, wimax and radio. now it will get out of bootloop however it does the "welcome to bakedsnack" goes to setup then freezes for 10 seconds then does the htc evo4g white screen, "welcome to bakedsnack" and this process repeats over and over.
can someone help me either fix this with custom roms and keeping full root. or cans omeone teach me how to make this phone 100% brand new. as if i just opened it out of the box from sprint. thatw ay i can proceed to start all over.
P.S. i have no knowledge of adb.
bump. pleasE?
Do you have a nand backup
Sent from my PC36100 using XDA App
Did you wipe between flashes?
Maybe that will help.
jtc442 said:
Do you have a nand backup
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
well i did do a nand backup once before. however i tried to nand restore and it said wasnt anythign available or something along that line.
fua1 said:
Did you wipe between flashes?
Maybe that will help.
Click to expand...
Click to collapse
yes i did. wiped everything. however when i try to wipe dalvik. it just goes back to the menue. kinda like i never pressed anything.
get another rom!!!
jonathaflores said:
get another rom!!!
Click to expand...
Click to collapse
i tried going back to cm6 and it was on the blue x lookin screen for 45 minutes.
Dalvik does that to me too on clockwork but I've never had issues. Try to put a stock rooted Rom on the SD card and do it again.
Sent from my PC36100 using XDA App
Also, you can just put your card into your computer and put the Rom on it that way if you need to.
Sent from my PC36100 using XDA App
jtc442 said:
Also, you can just put your card into your computer and put the Rom on it that way if you need to.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
heres what im doing. going into recovery. mounting usb storage.
downloading rom. wipe everything. flash rom, reboot. nothing works.
just wiped everything, tried to flashi netarchy kernal(latest one), worked. flashed wimax(latest one) worked, flashed radio(newest one) came up an error. says the file is (bad)
bump please i need a solution
still no help. any suggestions?
haven't had a phone in 2 days almost please i need some help!??
b_allert said:
bump please i need a solution
Click to expand...
Click to collapse
If you are stuck in a bootloop, use the Clear Storage option in the bootloader menu, then in Recovery, clear the caches and flash your rom.
Try flashing RA recovery and are you nand unlocked?
Swyped from my HTC EVO- virus 1.4 b | RA recovery
ATownI20 said:
Try flashing RA recovery and are you nand unlocked?
Swyped from my HTC EVO- virus 1.4 b | RA recovery
Click to expand...
Click to collapse
i dont know how to flash ra- i am nand unlocked
Amon RA recovery
I was having some problems flashing roms at one time as well. Turned out to be a corrupted sd card that wouldn't mount. Try to take out the sd card and place it in a card reader. Save the files on there to you desktop and reformat the card. Place it back in the phone and reboot. This may work for you. And the Amon RA recovery and directions are in the Development section of the EVO forum. Most of the time it's on the first page. Good luck.
I just rooted my Incredible. I got the Incredible as a replacement for my Eris. When I was rooted with the Eris, I had Amon-Ra recovery, and now with the Incredible I have Clockwork, which I am unfamiliar with.
When I got the Incredible, I didn't format the SD card (like a dummy) and the Incredible partitioned it.
I put my ROM .zip file on the Incredible partition. Went into recovery, did a back up, did a data and cache wipe, and when I went to flash the ROM, Clockwork was reading the Eris partition, and of course, the ROM was not on there, so I did a restore and here I am.
Can I just put the ROM on the Eris partition and flash from there? Will it install and boot properly? Or should I just pull all the data and reformat the SD card?
If you are using the SD from the Eris, there's your answer...
On the other hand, did the DInc not come w/ it's own SD, and have you tried that one?
If you don't have the Eris anymore, why would you still need that "partition"? Just format the whole card to FAT32 with no partitions. If that doesn't fix the problem then the card may be buggy.
Thanks, but it was neither... DUH! When i mounted the phone, it was reading 2 drives which I thought was 2 separate partitions until I realized that one was SD and one was internal storage.
I am all good on that now, but now I am having issues with flashing ROMs because I have an SLCD incredible, and I can't find a kernel that I know for sure has the drivers I need for SLCD... but taht is a different topic!
Thanks again.
escalavee said:
I am all good on that now, but now I am having issues with flashing ROMs because I have an SLCD incredible, and I can't find a kernel that I know for sure has the drivers I need for SLCD... but taht is a different topic!
Thanks again.
Click to expand...
Click to collapse
i heard lou's #6 works. just save that kernel on your sd card for when ya need it.
PhillyCheez said:
i heard lou's #6 works. just save that kernel on your sd card for when ya need it.
Click to expand...
Click to collapse
Awesome! Thanks. i will try that. i have been searching for 2 days, and I have not come across one single reported case of this happening.
escalavee said:
Awesome! Thanks. i will try that. i have been searching for 2 days, and I have not come across one single reported case of this happening.
Click to expand...
Click to collapse
Tell me how it goes. I've been helping my friend who has an slcd. The first rom I put him on is skyraider 3.5 and it works perfectly without changing the kernel.
Sent from my ADR6300
PhillyCheez said:
Tell me how it goes. I've been helping my friend who has an slcd. The first rom I put him on is skyraider 3.5 and it works perfectly without changing the kernel.
Sent from my ADR6300
Click to expand...
Click to collapse
have you ever heard of anyone having this problem? I have been researching this for 2 days, and I have not read of one single person that experienced this!
escalavee said:
have you ever heard of anyone having this problem? I have been researching this for 2 days, and I have not read of one single person that experienced this!
Click to expand...
Click to collapse
Yes which is why I know Lou's #6 should work. I also think koush's #2 works with slcd.
I believe certain ROMs come with a kernel that supports slcd. CMs ROMs should work.
Sent from my ADR6300
I am all good. Running CM6.1 themed.
Hey guys,
Okay so here's the schtick:
I've got Incredibly Re-Engineered Z 1.01 installed (http://forum.xda-developers.com/showthread.php?t=983182, "The Blue One"). I like it about 80% of the way, but it's giving me issues, so I planned on going back to either regular -Re-Engineered 2.3.2 (http://forum.xda-developers.com/showthread.php?t=893233, "The Green One")or SkyRaider 3.5. The issue is that neither of them will install with Clockwork Mod 3.0.0.8. Perusing the forums told me to downgrade to 2.5.1.2. Fine. Looked around, downloaded the zip file, and tried to install it via HBOOT 0.92. I downloaded it three times and made sure the SD card was formatted as FAT32, just as the instructions said. I renamed it per the instructions as well, and each time, HBOOT tells me "no image or wrong image". I'm making the assumption that attempting to clockwork mod from within clockwork mod would be a generally bad idea.
I've got everything backed up on my MicroSD card, so while I have no problem blowing away my internal storage to all hell and doom, I'd rather not do the same to my SD card (although I do have it backed up as well, so if shove comes to thrust I CAN do that). In fact, I am having the perpetual "preparing phone storage" issue as well, so blowing everything to all hell and doom is probably a good idea for me anyway.
Regardless, I need to downgrade clockwork mod until the next release of re-engineered. I already did a search for the procedures, but right now the score is HBOOT: 1, Voyager529: 0.
Joey
Do you have the zip on the root of your SD card? It can't be in any folders or hboot won't see it.
Sent from my Incredible using XDA App
newtoroot said:
Do you have the zip on the root of your SD card? It can't be in any folders or hboot won't see it.
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
It is on the root of the SD card. HBOOT sees it, but insists that it's a 'bad image or no image'.
Joey
I have one that I use if you want to try it.... your file might be corrupt
Sent from my Incredible using XDA App
newtoroot said:
I have one that I use if you want to try it.... your file might be corrupt
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
I'll def take a crack at it. I'ma download one more time and triple check the MD5.
Joey
voyager529 said:
I'll def take a crack at it. I'ma download one more time and triple check the MD5.
Joey
Click to expand...
Click to collapse
http://db.tt/66Q3ior
Here you go I know it work because its the one I use..... be sure you name it exactly .... PB31IMG.zip and put it on the root of the SD card and not in the root folder
Sent from my Incredible using XDA App
Let me know how it goes
Sent from my Incredible using XDA App
Or you could use the Amend2Edify script to make CWM2 things compatible with CWM3.
Sent from my Droid Incredible running Myn's Warm TwoPointTwo RLS5.3.
newtoroot said:
http://db.tt/66Q3ior
Here you go I know it work because its the one I use..... be sure you name it exactly .... PB31IMG.zip and put it on the root of the SD card and not in the root folder
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
Beautiful! That's it!
Apparently the multiple other files I got were, in fact, not the right files. thanks dude!
...now I just gotta restore all the stuff from my hard disk (I did a full reformat of the SD card just to be sure).
Joey
voyager529 said:
Beautiful! That's it!
Apparently the multiple other files I got were, in fact, not the right files. thanks dude!
...now I just gotta restore all the stuff from my hard disk (I did a full reformat of the SD card just to be sure).
Joey
Click to expand...
Click to collapse
Anytime bro I don't take donations but I like the thanks button lol!
Sent from my Incredible using XDA App
Hello,
I am having some serious issues with my Evo. For several weeks now my Gmail accounts have not been syncing at all, incredibly frustrating, to say the least. I was hoping that the Gingerbread update would take care of this, so I followed all the instructions I could find, downloaded the de-odexed zip update, booted into recovery, wiped davlik, then installed that zip, and it seems to have updated (I'm running 2.3.3 now, that's the updated version, right?). However, not only has that not solved my syncing issue, but now when I went into Titanium Backup, it said that it could not establish root access! Also, when I go into ROM Manager and try to "Manage and Restore Backups," nothing comes up, when I know there are 3 backups on there (I was trying to delete one of them to free up space on my SD card).
Maybe related are the terrible space issues I've been having. It's also for some time now been telling me that I'm running low on space, but I have moved virtually all of the big programs to the SD card and deleted things I do not use, so I really don't understand how it's having such space issues.
Anyway, I really need some help here. I guess the number one most important thing I need to figure out is why I am no longer rooted. Can I just reroot like I did in the first place? But I'm also very bothered by this syncing problem, and the space issue is not far behind.
Any help would be greatly, greatly appreciated. Thanks in advance!
Do you have the superuser app and what version is your hboot?
Sent from my PC36100 using XDA Premium App
Oh and do you have a recovery on that still works like among RA or clockwordmod (amon RA is way better tho)
Sent from my PC36100 using XDA Premium App
I do have SuperUser, but have used it very little - what can I do with it/what will it tell me?? Not sure what HBoot version I have - where do I find that?
I don't have Amon RA, I do have ClockWorkMod, although I'm a little confused - what is ROM Manager? I'm not sure if ClockWorkMod still works - how can I tell?
Sorry, I'm obviously fairly a novice at this. Thanks much for your quick reply, and thanks in advance for your help.
Superuser is the app that gives you root permission
and rom manager is an app for beginners that will allow people to download roms and making backups doesnt do nothing
OK im going to help you now but your going to have to flash a new rom and everything ok tell me when your ready
Ah, OK. Fantastic, thanks so much!!! I am ready anytime...
download that rename PC36IMG and put on root of sd card now go into bootloader go into fastboot and it should stay start update press volume up for yes ok then reboot
EDIT: hers a good link
http://api.viglink.com/api/click?fo...ersonic-v2.3 - xda-developers&txt=PC36IMG.zip
Oh shoot, I just realized that, since I'm at work, I'm not going to be able to put anything on the SD card until I get home later tonight. Maybe you can just spell out the instructions and I'll give it whirl tonight?
Also, I just clicked on that link though, and got this message - "Parameter 'out' is required."
Thanks so much again!
yeah sure k and yeah link is bad
download that rename PC36IMG and put on root of sd card now go into bootloader go into fastboot and it should stay start update press volume up for yes ok then reboot
EDIT: hers a good link
http://api.viglink.com/api/click?fo...ersonic-v2.3 - xda-developers&txt=PC36IMG.zip
now you should have amon ra as your recovery boot into recovery now make sure you downloaded a rom or you can use that stock rooted gingerbread and put it on root of sd now go into recovery on evo and click wipe cache then go into install zip from sd card choose the zip (rom) and it should install then reboot
and try titanium backup and gmail again if tb should work if gmail doesnt work view this thread on gmail http://forum.xda-developers.com/showthread.php?t=703912
im currently running Decks rom with savaged-zen kernel sbc and everything is working perfectly heres a link to decks rom http://forum.xda-developers.com/showthread.php?t=1078558
Keep in mind you can flash any roms u want these are my choices
these are really stable ones
Here are some good Roms
Myns warm 2.2
http://forum.xda-developers.com/showthread.php?t=793471
End of Days
http://forum.xda-developers.com/showthread.php?t=1065414
Decks Rom
http://forum.xda-developers.com/showthread.php?t=1078558
Konis elite series 3
http://forum.xda-developers.com/showthread.php?t=941055
If he has ROM manager he should just try to change recoverys with that if not I'll post some links where you can get the recovery and some nice gb ROMs.
Recovery.
http://forum.xda-developers.com/showthread.php?t=705026
radios ,wimax,pri etc..
http://forum.xda-developers.com/showthread.php?t=715485
Mikg ROM.
http://forum.xda-developers.com/showthread.php?t=1038967
Kings ROM this is what I'm on its amazing.
http://forum.xda-developers.com/showthread.php?t=1120734
These all have instructions on how to flash them .
Hope I helped you somewhat.
Sent from my PC36100 using XDA App
yeah but he doesnt have root he has superuser but he doesnt have superuser permissions thats wht he said so he cant use like tb or rommanager and yeah mikgs rom is good but im giving him COMPLETELY stable roms with good battery life
jadden said:
yeah but he doesnt have root he has superuser but he doesnt have superuser permissions thats wht he said so he cant use like tb or rommanager and yeah mikgs rom is good but im giving him COMPLETELY stable roms with good battery life
Click to expand...
Click to collapse
Sorry didn't see that and I was posting all those links before I saw all yours didn't mean anything by it it just took that long and I just saw by the time I was done you had posted everything and yes decks is bad ass I also use that I have it backed up as well.
Sent from my PC36100 using XDA App
So did he get it to work he hasn't posted?
Sent from my PC36100 using XDA App
Thanks much to both of you. Yeah, all I really want is the updated stock rom rooted, I'll be happy with that. I'll try out what you suggested later and let you know what happens.
In the meantime, anyone have thoughts on my storage issues? It fluctuates like crazy, goes from 50 MB+ free, down to like 4. Driving me absolutely crazy!
I just got my og Evo 4g (on the 3d now) back on for my wife since she dropped hers and is in 2 pieces lol. I havent been on the 4g forum in a long long time and need some help from you guys.
I have found out the im on android 2.2 with baseband version 2.15.00.11.19
Was running Eternal Prophecy v6.1 and on 2.6.32.27 netarchy kernel. I know im pretty far behind and want to know how i would go about getting the phone up to date and run a rom that is pretty stable since its for my wife. She has been bashing me ever since ive found out about rooting and flashing roms, so i want to hook her up with a stable rom with all bloatware removed, and show her that "aftermarket" roms are way better than the one that came with the phone. Any recommendations would be helpful.
Oooohhhhh....1 thing, i dont have the SD card anymore and most likely will be putting her SD card in, would that be ok?
Yes that should be okay. Might need to partition the card via recovery. Roms I have been using cm7 for aosp and mikG for sense. They are both good. Kernels that are out for gingerbread are anthrax, lionfish, and a couple of others. If you want to go straight stock give tommytomatoes classic rom a go. He has tweaked that rom pretty good. Hope this helps.
Sent from my PC36100 using xda premium
marcusva79 said:
Yes that should be okay. Might need to partition the card via recovery. Roms I have been using cm7 for aosp and mikG for sense. They are both good. Kernels that are out for gingerbread are anthrax, lionfish, and a couple of others. If you want to go straight stock give tommytomatoes classic rom a go. He has tweaked that rom pretty good. Hope this helps.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Thanks for the reply....I'm still kinda noob on partitioning lol, what do you mean exactly by partitioning via recovery? Is that the whole ext4 thing?
If you are running the latest version of Clockwork mod recovery, you have the option to partition the SD card directly from the recovery. Hope that help man.
cev2387 said:
If you are running the latest version of Clockwork mod recovery, you have the option to partition the SD card directly from the recovery. Hope that help man.
Click to expand...
Click to collapse
What do I do after I partition the SD card?
Partition your card 32/1024, once you do that your SD card should be complete. Partitioning your card will delete everything in your card so be cautious and backup your memory onto a computer
Sent from my PC36100 using xda premium
Steven 1 said:
Partition your card 32/1024, once you do that your SD card should be complete. Partitioning your card will delete everything in your card so be cautious and backup your memory onto a computer
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
What's partitioning actually do? If I back up my wifes SD card then partition the SD card....do i. just copy the backed up data to the card?