Related
I'm looked everywhere but nothing. Please help if you can.
I was on BeastMOD2.5 then some things on the phone were not working (Tmobile S2) so I called in and they shipped me a replacement. I used this link (http://forum.xda-developers.com/showthread.php?t=1323878) to restore it back to stock and unroot the phone and it worked besides one problem, I still got the synergy kernel gray screen at bootup, so as of now, i'm at stock, unrooted just with that synergy kernel screen. I looked it up and found the ODIN stock way to get it back so I tried that way, but now everytime I hook the USB to my computer to try to ODIN it, it always says USB not recognized (I've tried searching for fixes: clean USB, reinstall drivers, reinstall Klies, other computers, other USB cord, other USB ports but nothing).
I just need to get that synergy kernel screen off from bootup, but now that I cannot hook up the phone to any computer, what should I do? Is there a wireless option I have? Is there a way to brick the phone to where it won't even boot up when tmobile gets it back that they wouldn't even know? thing is it will also charge using a computer, but the computer won't recognize it (im done the whole settings USB options as well)
Please help, thanks guys.
any ideas?
le14 said:
I'm looked everywhere but nothing. Please help if you can.
I was on BeastMOD2.5 then some things on the phone were not working (Tmobile S2) so I called in and they shipped me a replacement. I used this link (http://forum.xda-developers.com/showthread.php?t=1323878) to restore it back to stock and unroot the phone and it worked besides one problem, I still got the synergy kernel gray screen at bootup, so as of now, i'm at stock, unrooted just with that synergy kernel screen. I looked it up and found the ODIN stock way to get it back so I tried that way, but now everytime I hook the USB to my computer to try to ODIN it, it always says USB not recognized (I've tried searching for fixes: clean USB, reinstall drivers, reinstall Klies, other computers, other USB cord, other USB ports but nothing).
I just need to get that synergy kernel screen off from bootup, but now that I cannot hook up the phone to any computer, what should I do? Is there a wireless option I have? Is there a way to brick the phone to where it won't even boot up when tmobile gets it back that they wouldn't even know? thing is it will also charge using a computer, but the computer won't recognize it (im done the whole settings USB options as well)
Please help, thanks guys.
Click to expand...
Click to collapse
does it recognize it in adb if usb debugging is enabled?
Did you try pulling the battery for 30 seconds?
Sent from my SGH-T989 using XDA App
reboot the PC / laptop
unplug all other USB devices
AllGamer said:
reboot the PC / laptop
unplug all other USB devices
Click to expand...
Click to collapse
I've tried that and i've tried this on 4 PC's and my usual Mac that I use to transfer files but no luck.
I also tried the debugging mode but nothing as well. Ill try for a couple more days with random things but since the rom is stock and everything is basically like out the box status if I were to return it with the synergy kernel screen on bootup, what would tmobile say even though everything is stock even the kernel?
Hey Buddy, there had been a few of us that has had the same problem.
For some reason, after you restored your phone back to stock, you still have the Synergy Logo when turn on and you lose your USB drivers, somehow, I don't know why. I tried so many ways for my computer to locate my phone, but after so many hours of looking, I gave up. Sold my phone to my friend and got another one.
Lesson learn. Someone should look into a solution for this problem
Thanks.
Mr_creeper_98 said:
Hey Buddy, there had been a few of us that has had the same problem.
For some reason, after you restored your phone back to stock, you still have the Synergy Logo when turn on and you lose your USB drivers, somehow, I don't know why. I tried so many ways for my computer to locate my phone, but after so many hours of looking, I gave up. Sold my phone to my friend and got another one.
Lesson learn. Someone should look into a solution for this problem
Thanks.
Click to expand...
Click to collapse
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
ThC23 said:
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
Click to expand...
Click to collapse
I used the easiest unroot method ever
http://forum.xda-developers.com/showthread.php?t=1323878
ThC23 said:
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
Click to expand...
Click to collapse
+1 From the posts Ive read the people that have had this issue have used the zedomax flash. Safest bet for anyone looking to go back to stock should stick with the odin method. I think there should be a warning in the index thread next to the [HOWTO] [ROM] How to Unroot SGH-T989 Painlessly link about the usb issue and also the kernel boot image even thou if people would just read the whole thread they would see that others have already reported the kernel image issue......
Returning the phone with that would land you an out if warranty fee
Sent from my SGH-T989 using Tapatalk
Mr_creeper_98 said:
I used the easiest unroot method ever
http://forum.xda-developers.com/showthread.php?t=1323878
Click to expand...
Click to collapse
If you flash this stock kernel zip before you flash the easiest unroot method ever it will give you stock kernel and remove any custom kernel logo.
http://db.tt/mYZw1F8w
Powered by the SGSII....
yeah but is was too late to know that, so there's no way we can use the samsung recovery mode with the install from SD option?
Is your recovery stock. ? If its not you can always put it your sd card and flash it that way.
le14 said:
yeah but is was too late to know that, so there's no way we can use the samsung recovery mode with the install from SD option?
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App
BACKSTORY - Prior to the JB update, I'm not sure if it happened with ZV9 or ZV8, but I was getting the "slow charging" message when plugged into a PC (didn't matter what cable I used) AND I could no longer do any data syncs.
I'm not sure if it dirty connectors, a bad charging port, rooting, or an earlier update that caused this. As I said, it hasn't mattered what cord I used. (LGOG, LG Marquee, HTC Evo Shift, Nexus 7, generic cords from Fry's, etc)
Now I've soft bricked my phone after a stupid brain-fart, and I can't get Windows to recognize the phone is connected, thus LGNPST won't work. I've tried on 4 PCs.
Anyone run across this or have any thoughts other than sending it in for repairs? I don't have TEP.
dmcaylor said:
BACKSTORY - Prior to the JB update, I'm not sure if it happened with ZV9 or ZV8, but I was getting the "slow charging" message when plugged into a PC (didn't matter what cable I used) AND I could no longer do any data syncs.
I'm not sure if it dirty connectors, a bad charging port, rooting, or an earlier update that caused this. As I said, it hasn't mattered what cord I used. (LGOG, LG Marquee, HTC Evo Shift, Nexus 7, generic cords from Fry's, etc)
Now I've soft bricked my phone after a stupid brain-fart, and I can't get Windows to recognize the phone is connected, thus LGNPST won't work. I've tried on 4 PCs.
Anyone run across this or have any thoughts other than sending it in for repairs? I don't have TEP.
Click to expand...
Click to collapse
can you get into fastboot and-or recovery? also did you have a back up made or a rom downloaded on your phone?
javskies said:
can you get into fastboot and-or recovery? also did you have a back up made or a rom downloaded on your phone?
Click to expand...
Click to collapse
I can get into stock recovery. When I try to get into fast boot, I just get a blinking LED.
The only options for updates are from cache (empty) or from ADB (can't connect).
dmcaylor said:
I can get into stock recovery. When I try to get into fast boot, I just get a blinking LED.
The only options for updates are from cache (empty) or from ADB (can't connect).
Click to expand...
Click to collapse
have you tried factory resetting? it will wipe your data if you are ok with that and if that fails i would say your last option is a battery pull
javskies said:
have you tried factory resetting? it will wipe your data if you are ok with that and if that fails i would say your last option is a battery pull
Click to expand...
Click to collapse
No. I didn't think it would work as I changed/added files in /system which is was caused this mess. So the reset wouldn't remove them, would it?
Same with a battery pull. When it powered back on, I would be back where I am now.
/(
dmcaylor said:
No. I didn't think it would work as I changed/added files in /system which is was caused this mess. So the reset wouldn't remove them, would it?
Same with a battery pull. When it powered back on, I would be back where I am now.
Click to expand...
Click to collapse
factory reset resets your /system and /data back to stock so it should fix it
javskies said:
factory reset resets your /system and /data back to stock so it should fix it
Click to expand...
Click to collapse
Nope. Still had the security error on boot. I took it into a sprint repair center today, and they couldn't get it to connect either. They checked the charging port. The pins were intact and it was still soldered tightly to the board, so it should have connected. Even thought I don't have TEP, the phone was under a year old, so they are replacing with another unit for $50.
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
re: flashing stock rom.
empire-1 said:
Long time listener first time caller (this is my first post here) I'm going to try not to leave out any details. Bear with me.
I rooted my Tmobile Galaxy s3 for the first time and installed CM10.1. It was great for a few months, then it started getting glitchy. So I would flash the nightly release and it would be fine for a while. I decided to unroot and start fresh. It was then that I discovered the PC wouldn't recognize the device. I followed a youtube tutorial to unroot with Mobile Odin. I extracted and flashed a stock image called Tmobile_GS3_SGH-T999_4.0.4 after clearing counter with Triangle Away.
Well it seemed to go well, unrooted my device, but now the OS is incomplete. No internet app, messaging won't work at all, and it keeps crashing and freezing. The usb port is still not working so I cannot root with my computer, and the flash counter still says 1 and status says modified.
Tmobile sent me a new one on warranty, but I'm really worried they're gonna charge me 500 bucks because it's "modified". I have a few days before I have to send it back, Is there anyway that I can fix this without connecting it to my computer? Any help is GREATLY appreciated.
Thanks
Click to expand...
Click to collapse
First thing to do is to put the phone into DOWNLOAD mode to TEST it and see if ODIN will recognize it.
If Odin recognizes it then there is NO need to send it back to Samsung, all it needs is a proper Odin flash.
Just because when all those missing apps and the usb had issues it does not necessarily mean that Odin will not recognize the phone.
If your computer is not working or you don't have a windows computer find a relative or a friend who has one.
Even a laptop computer would do just fine.
Good Luck!
Tried that
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
re: try this.
empire-1 said:
Thanks for your response, I have tried connecting it to Odin in download mode and it still will not see it. I really don't know what the problem could be. the usb used to work fine and there has been no physical damage.
Click to expand...
Click to collapse
Try a different usb cable and or plug usb into different port,
if that fails, re-install the Samsung usb drivers for the phone.
Remember, if the phone goes into download mode 99.999% of the time the phone
can be flashed successfully using Odin.
The main reasons for usb issues in "download mode" are either loose connection to computer's usb ports,
usb cable intermittant or the Samsung usb drivers in the computer are corrupted in one way or another.
Thanks again
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
empire-1 said:
I guess I should have put this in my first post. I have tried 2 different cables in every port on 2 different computers. I have re installed the drivers multiple times as well. Also the new phone they sent me is recognized just fine.
Click to expand...
Click to collapse
You are in a tough spot. I don't know if you have the stock recovery or not but if not you can either download the stock rom on the phone again...you know the best way although unethical really...being that the usb port is down is to re root it and flash a rom like the gt 1300 or whatever the international version is and intentionally hard brick your phone. Hard brick meaning won't even turn on withOut jtag and that even just clears everything out and reloads software like from the factory.If the phone won't boot up then there's no way for the person to tell its been modified. Majority of the time samsung doesn't get the damaged phones its some idiot making 8 bucks an hour to refurbish phones. That's what I would suggest you do being that the counter is still saying one flash
tmobile s3 running wicked. best rom i've ever used
Pretty sure I'm on stock recovery. it does give me an option to "apply update from external storage"
Thanks for all your help, I'll try to flash the stock rooted rom through the stock recovery although i'm not optimistic.
I will check out the wicked rom you mentioned, although I am a little hesitant to root my new one after this ordeal.
but how do I re root it if I have no usb or custom recovery?
re: flashing
empire-1 said:
but how do I re root it if I have no usb or custom recovery?
Click to expand...
Click to collapse
If you can get your phone to boot normally with any stock rom rooting will not be a problem at all.
If you get the phone working and booting properly you would be very lucky but from reading
everything you have wrote so far I highly doubt that you can successfully flash any rom at all
unless you have forgotten to tell us something.
Don't worry about rooting, worry about getting the phone to boot and work properly with stock rom.
yep. running stock recovery. hopeless?
re: flashing
empire-1 said:
yep. running stock recovery. hopeless?
Click to expand...
Click to collapse
I never said a word about stock recovery, I said STOCK ROM.
Invest in a JIG, it puts your phone into download mode instantly even if you cannot
do it manually with the three buttons as long as the phone is not completely dead.
You can buy a jig for less than $4.00 shipped on eBay, it's great little tool.
All you do is remove the battery from the phone and put it back in then simply plug
the jig into the usb port then in a couple seconds it will be in download mode then you
can unplug the jig and the phone is ready to be odin flashed..
Remember what I said before, just because the usb did not work with some
rom you flashed it does not mean that it will not work for download mode.
The jig was one of the best investments I have made when I started using these samsung android phones.
Once in download mode it will allow you flash the stock or stock rooted Jellybean 4.1.1 rom.
This is my best advice.
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
re: flashing
empire-1 said:
I am not having a problem getting into download mode, I will take your advice and buy a jig though in case I ever need it. Again, thanks for all your help, I think I may have to send it back and hope for the best.
Click to expand...
Click to collapse
Before sending it back, if I were you I would find a friend or family member who has
a windows computer and just for the hell of it install the usb drivers in the computer
just to see for sure that while in download mode and connected usb cable if Odin still
is not lighting up the [COM:xx] top left rectangle on Odin screen.
I have odin flashed many phones dozens of times in the past 3 years and I have yet
to come accross one which goes into download mode but odin is not reconized
unless there is something wrong with the windows computer or usb ports and drivers.
That only happens as I said before, if there is something wrong with the drivers,
usb ports and or usb cables or some other malfunction in the windows computer.
Just think, if it works no need send the phone to samsung plus you would have learned
something too.
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
re: well that's it!
empire-1 said:
I did try my other computer with the same results, tomorrow I will try it with my girlfriends laptop, I am starting to think something happened to the usb jack. It didn't work before I unrooted it either, that's why I used Mobile Odin. I am all about learning this stuff though. I plan to root every new phone I get, this has just been a little frustrating.
Click to expand...
Click to collapse
This is the first I heard that the usb did not work before and the usb socket might be broke.!!!
In that case since you cannot use the Wifi in your phone to transfer and install apps since it cannot boot normally
(unless I am missing something again) and you cannot use usb and it would not even help to remove the external
sd and copy any apps at all since you would have no way to install the apps.
Then you are right, you have to send it back, exchange it and hopefully you can come up
with a good enough excuse why it's not working so samsung will not charge anything )which I doubt)
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
empire-1 said:
I must not have been clear, I can use the phone. it makes calls, the wifi works, i can use third party messaging and browser apps. again, there has been no physical damage. the socket worked a few weeks ago when I rooted it. I only noticed it not working when I went to unroot it.
So basically it sounds like there is no way to root or install custom recovery without usb, correct?
Click to expand...
Click to collapse
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Josh McGrath said:
I don't know of any way unfortunately
tmobile s3 running wicked. best rom i've ever used
Click to expand...
Click to collapse
Can you flash it through mobile odin? I don't know anything about the mobile version.
tmobile s3 running wicked. best rom i've ever used
Been trying to figure this out for the last few days, Google support has been too. I've tried the basics, different usb cord stock and not, factory reset going to stock, different kernels, different roms.
I can only get my nexus 7 2013 to charge when I go to bootloader, then to power off, then uplug the cord and plug back in fast. Once the device is on I get nothing when I plug the usb in, computer or AC. I used to be able to connect to PC no problem. I use the OTG cable a lot for HDDs and my camera, now nothing works. Tried USB debugging on and off and MTP.
I would just say the usb port broke somehow and go for an RMA but since it charges while it's off I feel like it's software related... If you guys have any suggestions I would really appreciate it.
morgang321 said:
Been trying to figure this out for the last few days, Google support has been too. I've tried the basics, different usb cord stock and not, factory reset going to stock, different kernels, different roms.
I can only get my nexus 7 2013 to charge when I go to bootloader, then to power off, then uplug the cord and plug back in fast. Once the device is on I get nothing when I plug the usb in, computer or AC. I used to be able to connect to PC no problem. I use the OTG cable a lot for HDDs and my camera, now nothing works. Tried USB debugging on and off and MTP.
I would just say the usb port broke somehow and go for an RMA but since it charges while it's off I feel like it's software related... If you guys have any suggestions I would really appreciate it.
Click to expand...
Click to collapse
If you've tried different kernels, roms, and I assume different a PC, USB ports, USB cable, then you've eliminated software as a possibility, as well as external hardware, I would do a backup, (unroot and flash back to stock and relock is applicable) then RMA it, you're only delaying the inevitable by waiting it could be some corruption in the emmc, or some other hardware fault that might act unreliably.
mdamaged said:
If you've tried different kernels, roms, and I assume different a PC, USB ports, USB cable, then you've eliminated software as a possibility, as well as external hardware, I would do a backup, (unroot and flash back to stock and relock is applicable) then RMA it, you're only delaying the inevitable by waiting it could be some corruption in the emmc, or some other hardware fault that might act unreliably.
Click to expand...
Click to collapse
Is there a way I can put it to full stock, bootloader and recovery through just the device. Since I can't connect to PC. The only way I came across was through the toolkits.
morgang321 said:
Is there a way I can put it to full stock, bootloader and recovery through just the device. Since I can't connect to PC. The only way I came across was through the toolkits.
Click to expand...
Click to collapse
Well, you can boot into a custom recovery I assume, so you can flash a rom from there (you can get zips from here), then you can root the device (needed for next step), that part is easy enough, the following is only theoretical, go into the OS, install that bootloader lock/unlock app, lock the bootloader, then unroot from within SuperSU (that last part I'm not sure of since you just relocked the bootloader, so not sure if it will work.) Of course even if all that did work, you will still have a custom recovery, so hopefully they won't see that, I believe there are apps which can install custom recoveries from within the OS, but I don't think they flash the stock one.
Maybe someone else more knowledgeable knows of a better/effective way and they will chime in and correct me, etc.
4963955171
mdamaged said:
Well, you can boot into a custom recovery I assume, so you can flash a rom from there (you can get zips from here), then you can root the device (needed for next step), that part is easy enough, the following is only theoretical, go into the OS, install that bootloader lock/unlock app, lock the bootloader, then unroot from within SuperSU (that last part I'm not sure of since you just relocked the bootloader, so not sure if it will work.) Of course even if all that did work, you will still have a custom recovery, so hopefully they won't see that, I believe there are apps which can install custom recoveries from within the OS, but I don't think they flash the stock one.
Maybe someone else more knowledgeable knows of a better/effective way and they will chime in and correct me, etc.
Click to expand...
Click to collapse
I do think this will work. I don't think flashing a recovery voids warranty if you aren't rooted and unlocked... Thank you for the help man. Wish it wasn't RMA but is what it is...
morgang321 said:
I do think this will work. I don't think flashing a recovery voids warranty if you aren't rooted and unlocked... Thank you for the help man. Wish it wasn't RMA but is what it is...
Click to expand...
Click to collapse
No problem, good luck, let me know what happens.
mdamaged said:
No problem, good luck, let me know what happens.
Click to expand...
Click to collapse
I just did another factory reset. This time with Elemental kernel, stock 4.4.2 from google. Probably the 4th time I've factory reset but first time with this kernel. All of a sudden I got ADB connected to PC, first time I've had any response from usb while tablet was up and running for 3 days. Might not have to RMA after all
morgang321 said:
I just did another factory reset. This time with Elemental kernel, stock 4.4.2 from google. Probably the 4th time I've factory reset but first time with this kernel. All of a sudden I got ADB connected to PC, first time I've had any response from usb while tablet was up and running for 3 days. Might not have to RMA after all
Click to expand...
Click to collapse
I hope it stays fixed, sometimes problems caused by hardware can be intermittent. Keep testing it daily.
sooo, I gues something went wrong... since the new marshmallow images was posted today, there was a thread on reddit on how I can just download the image and rename it and flash it as OTA. The phone reconginzed the image and went half way through the install and then went black. now it wont even buzz or register the charger. Does nothing when connected to the computer either so I assume there is nothing that could be done. Quite a shame, the phone worked quite nicely until is killed it . Anything I can do?
Did you install it thru TWRP?
thekingestkong said:
sooo, I gues something went wrong... since the new marshmallow images was posted today, there was a thread on reddit on how I can just download the image and rename it and flash it as OTA. The phone reconginzed the image and went half way through the install and then went black. now it wont even buzz or register the charger. Does nothing when connected to the computer either so I assume there is nothing that could be done. Quite a shame, the phone worked quite nicely until is killed it . Anything I can do?
Click to expand...
Click to collapse
There is one thing I recommend trying as there is a bug in official firmware where the phone when connected to a computer can turn off randomly and not charge or boot. What you need to do is disassemble the phone and unplug the connector at the top of the phone to disconnect the battery and then plug it in.
krazy23 said:
Did you install it thru TWRP?
Click to expand...
Click to collapse
no, the phone picked up the update from the internal storage
dc959 said:
There is one thing I recommend trying as there is a bug in official firmware where the phone when connected to a computer can turn off randomly and not charge or boot. What you need to do is disassemble the phone and unplug the connector at the top of the phone to disconnect the battery and then plug it in.
Click to expand...
Click to collapse
thanks, I'm aware of that. Some folks experiencing the same issue tried that with no success. My phone is still under warranty and the screw securing the backplate has a seal on it that I dont want to tamper with.
I guess I'll be sending the phone for to Asus for repair...
Don't lose hope.
My phone was in a similar predicament.
No response to any buttons, nothing on screen, no buzzing or LED's at all.
I was able to get it recognized in the xFSTK Downloader and showing up in windows device manager as a Moorefield device.
I tried many times to get it to put the images on the phone through the xFSTK tool and it failed many times.
I was about to give up and tried again this morning and miraculously the writing succeeded and now my phone is in a bootloop (I think the battery may have been completely drained with my attempts to save it's life.)
I have it on charge currently so hopefully when there is enough juice I should be able to flash the raw file and be back up and running.
I see, you can follow the unbricking tutorial in the general section. Works fine for me and saved me from sending it to the service center.
krazy23 said:
Did you install it thru TWRP?
Click to expand...
Click to collapse
I did! And now my phone is dead! But it buzzes when I press the power button for some seconds.. But it's always black
galagala2 said:
I did! And now my phone is dead! But it buzzes when I press the power button for some seconds.. But it's always black
Click to expand...
Click to collapse
That's what happened to my phone, you can follow this thread this worked for me. Unbricking Method
krazy23 said:
That's what happened to my phone, you can follow this thread this worked for me. Unbricking Method
Click to expand...
Click to collapse
do you lose the data this way?
thekingestkong said:
do you lose the data this way?
Click to expand...
Click to collapse
Unfortunately, yes. Because I ticked the "wipe data" checkbox in the ASUS Flash Tool. Not sure what will happen if I don't. :fingers-crossed:
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfon
I also bricked my phone and used the method to fix my phone. Make sure you have all the required drivers installed in your pc/laptop before doing this. I took help of DriverMax to solve the drivers related issues. Make sure before installing and running the XFTSK tool all the drivers and everything is installed otherwise you will see blank forms in the Tool.