Hi, im just about to flash leedroids 2.2.3 rom, which can oc to 1.8 ghz with setcpu, just wondering if there are any dangers in having it at this speed? anything to be aware of ?
It might fry your device, it might not, you never know. There's no need to run it at 1,8ghz. I'd recommend max 1,2ghz for daily use though everything runs smoot at 1ghz already.
If you overclock to 1.8Ghz you will increase the risks to fry your CPU(and hence, your device will be destroyed). Lol.
Also overclocking too high can drain your battery real fast. As per Hawks556, max 1.2Ghz would be fine.(perhaps it is almost to optimal)
I overclock mine at 1.16Ghz and it is already very smooth in LeeDrOid.
You may sometimes wish to overclock it until 1.8GHz is just to show off to your peers only. Maybe through quadrants. But later on make sure you underclock it back.
Cheers. =)
thanks for the help, lol whole thing just froze while i was reading it better underclock it lol : /
OC up to 1.5ghz should not harm your device.
Take a look at ths HTC Flyer: it has the same CPU as the DHD but it's set to 1.5ghz by default.
So there is no risk in overclocking up to 1.5ghz in my opinion.
Tapatalked with Tapatalk from my Desire HD using Tapatalk.
is it possible to overclock above 768mhz? my phone never gets warm and battery lasts 2+ days, completely stable at this speed, i want to learn how i can edit a kernel and increase the cpu voltage ever so slightly and increase max cpu clock and see whats stable, could you help me?
i think you will just start to get kernel panics if you try to go much higher .
i have another phone (lg 500) also with the same arm6 cpu that comes clocked at 600 from factory. i have the option to oc to 825 with custom kernel but it always panics at 806 and is stable at 787.
So i think if you want a faster phone go buy one
massigann said:
i have another phone (lg 500) also with the same arm6 cpu that comes clocked
Click to expand...
Click to collapse
Nope.
P500 has an ARM11 MS7227 processor
Wildfire has an ARM11 MS7225 processor.
http://xi0.info/qualcomm-chips-kernel-arm-phones_7000.html
lol the chipset for the wildfire is MSM7225 but the cpu is arm6/11? on half of the sites is arm6 the other arm11..
Hi I have mine set to 710 and any higher starts getting random reboots.
But overclocking any higher than 768, your risking a chip melt or definitely shorting its life.
Hello everyone,
I am using many different roms since i have my desire z rooted.
The only problem is:
i can overclock to about 1 ghz... everything above it results in a freeze were my screen stays awaken.
Does anybody know what i'm doing wrong?
You can try different governors, and others may have some other tips. But its also possible that 1 GHz is all your CPU can handle. Not all CPUs are created equal. Far from it, in fact. There is a reason why CPUs are rated for a certain clock speed, in our case 800 MHz. That's the speed that the manufacturer can basically guarantee stable performance. Anything higher than that, and all bets are off. The manufacturing process has a huge amount of variability to it. So to see some people getting stable performance at 1.5 GHz, while you might not get over 1 GHz with the same series of chip, is not a big shock to me.
What roms are you using?
Sent from my SGH-T989 using xda premium
I have heArd that CPUs of the same phone can perform different. Mine will run all day at 1.8ghz while others get reboots and freezing when they go over 1-1.2 GHz. It really don't make sense to me but I guess it happens. Just glad mine will take whatever the kernel frequency sets allow lol.
Sent from my HTC Vision using XDA App
selfinflicted1 said:
I have heArd that CPUs of the same phone can perform different. Mine will run all day at 1.8ghz while others get reboots and freezing when they go over 1-1.2 GHz. It really don't make sense to me but I guess it happens. Just glad mine will take whatever the kernel frequency sets allow lol.
Click to expand...
Click to collapse
The manufacturing process for any type of CPU is quite variable. They can target a range of clock speeds, but can't efficiently manufacture all the chips at the same exact performance. CPUs actually get testing after manufacturing to determine the clock speed, and are "binned" into various categories based on how they tested. If a CPU doesn't meet the test specs for a certain clock speed category, it will be dropped to the next one down. Its also based on market demand. It completely possible a high performing chip gets labelled and sold as a lower performing one, simply to meet demand.
using the andramadus rom i can get well over 1.5ghz completely stable. you should try that
I heard there was a problem with stability issues before. Has it been fixed?
Also, do any of you guys feel the need to OC in the first place?
iArtisan said:
I heard there was a problem with stability issues before. Has it been fixed?
Also, do any of you guys feel the need to OC in the first place?
Click to expand...
Click to collapse
I tried OC'ing to 1,4 for a short time, didnt get any instabilities.
Which leads me to question two. No I don't feel the need to OC this phone, it is still good enough to cope with everything i throw at it.
The worst that will happen is that it will run a little hotter than normal. I was running Trinity Kernel on RasCream ROM clocked at 1.5GHz and it was fine, nothing crashed, no reboots, all was well.
Besides; It's a Nexus, it was built for this!
This varies for everyone
Sent from my GT-I9300 using Tapatalk 2
Meh. It all varies. No 2 chipsets are the same. What may work for someone else may not work for you. Trial and error is the only surefire way to find out.
Hi,
I agree with what has been said above, all the CPU's are not equal but actually the progress made by the kernel devs allows all (or almost) phones to run at 1.3* Ghz (1.34/1.35 Ghz, it depends of the kernel) without any issues.I think it's for all, actually I don't remember a user with issues at 1.3* Ghz...
And for most phones 1.5 Ghz is fine.For some others, above 1.5 Ghz is problematic but it depends also of too many factors.
Now it's not like it when the Genx came out, where 1.3 Ghz was the limit of CPU overclock for all the phones.
And many people can run stable at 1.65 Ghz, also it depends of the kernel.
For me for example my max CPU freq usable each day, so stable is 1.72 Ghz with Glados kernel, above (like 1.8 Ghz) it runs fine for 30 mins, sometimes 1 hour, but after always freeze/reboot... maybe my CPU can't reach this CPU freq or maybe my settings are wrong (voltage) ...
I agree, an extreme overclock like 1.72 Ghz is not really necessary for all day (heat, battery life, etc...) but a little overclock like 1.5/1.53 Ghz and you a difference in certain case (openning some apps, general UI, browsing, etc...).
But if we have the ability to test and play...why not... ,in any case for me it's yes, I like overclock and test the possibilities/limits of my phone, different settings...
Everyone does as he wants and it depends on what you want (battery life,a little more power in some situation like playing or a higher bench score ).
Well considering Texas instruments recommended highest clock speed for this processor is 1.5 ghz I'd say your fine. Anything above that is dependent on how well your chip set will handle it. Besides who honestly has needed to OC for anything other than benchmarks?
Sent From My Sprint Galaxy Nexus
Can someone tell me where I can find over-clock able kernel for my international One X? And what is the biggest clock speed on ONE X?
At present faux kernel can oc depending on what variant CPU you have but max at 1.6ghz
I have a v2 and can do 1.55 quad fine
Sent from my HTC One X using xda app-developers app
Eternity Project has an OC version up to 1.7GHz single core and 1.6GHz quad core
ZeroInfinity said:
Eternity Project has an OC version up to 1.7GHz single core and 1.6GHz quad core
Click to expand...
Click to collapse
Can you post link?
stefan063 said:
Can you post link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1640532
Be careful of OC, always remember, not all chips are made equal
About last Repacked Eternity Project for ARHD 9.x.x
Hello,
I try the Last repacked eternity project kernel for ARHD 9.x.x the Kernel: 3.4 v0.38 (Overclocked) at :
http://forum.xda-developers.com/showthread.php?t=1654982
But the module file was repacked for CMW ROM.
Who find good repacked module corresponding to this kernel ?
Thank you for jour help.
Underclock
As this thread is about setting CPU speeds, can somebody help me with my problem as no one is responding?
Its about underclocking..
http://forum.xda-developers.com/showthread.php?t=1868011
Thanks in advance!
how does the OC work? i mean then running all our core it is limited to 1.2 ghz and is 1.5 on a single core.
does that men all cores run at the OC value or just the single core?
Sent from my Transformer TF101 using xda app-developers app
I suggest you flash faux's kernel.
It can oc to 1.6GHZ for most user~
and it support s2W!
I expect many users will be aware of this information, but just in case you aren't.
Anyone overclocking should be aware that this will usually lead to higher power consumption which leads to more heat produced and lower battery life.
Especially if it is necessary to overvolt to acheive higher clock frequencies with stability.
Power consumption is proportional to Voltage squared, so small increases in core coltage can result in larger increases in power consumption than mught be thought.
Needless to say this can have negative impacts on battery discharge time and overall life (due to higher temperatures).
Plus there may be some throttling back of frequency if high temperatures are reached. Also possible that frequency may be reduced to 1Ghz maximum when battery voltage is low (i.e when discharged)
Hope this is helpful (first post here)
paul_59 said:
I expect many users will be aware of this information, but just in case you aren't.
Anyone overclocking should be aware that this will usually lead to higher power consumption which leads to more heat produced and lower battery life.
Especially if it is necessary to overvolt to acheive higher clock frequencies with stability.
Power consumption is proportional to Voltage squared, so small increases in core coltage can result in larger increases in power consumption than mught be thought.
Needless to say this can have negative impacts on battery discharge time and overall life (due to higher temperatures).
Plus there may be some throttling back of frequency if high temperatures are reached. Also possible that frequency may be reduced to 1Ghz maximum when battery voltage is low (i.e when discharged)
Hope this is helpful (first post here)
Click to expand...
Click to collapse
CPU throttle starts at 85c with thermal TJ-max of 99c.
also there is many debates about this, higher speed need more power which drains battery, but that said it means work gets faster meaning it can idle faster saving power, same the other side slower speeds save power but take longer to get work done using more power.
Sent from my Transformer TF101 using xda app-developers app
stefan063 said:
Can someone tell me where I can find over-clock able kernel for my international One X? And what is the biggest clock speed on ONE X?
Click to expand...
Click to collapse
Go to Faux123 and read the opening post
http://forum.xda-developers.com/showthread.php?t=1647993
it will teach you about Tegra 3 variants.
Flash Faux123 latest kernel to know what variant you have.
You can have 1.5ghz quadcore minimum, except if you have the poor variant0 of the Tegra 3, and 1.6ghz quadcore max if you have variant 3
So the overclocking you can achieve depends on your Tegra 3 variant, whatever the kernel, don't trust the figures in kernel threads titles, they just give the max if you have variant 3. And the majority of people have variant 1 so limited to 1.5ghz quadcore and there's nothing to do about it, no future kernel can change the way your CPU was manufactured.
Just, SetCPU can display 1.6ghz or more, but if you have variant 0 or 1 it will never use it (CPUspy will say 1550 and 1600 are unused frequencies)
Variant 1 can go upt to 1550mhz but not for quadcore, so who cares....! Same for kernels claiming up to 1.7ghz, it's in single/dual core, so once more, who cares?
What is important is what max speed you can achieve in quadcore, nothing else, and the limits are clearly defined by your Tegra3 variant
"all chips are not created equal" was a silly bull**** invented more than one year ago as an easy answer to noobs claiming they couldn't overclock their dual core at their max. Now, on the One-X and because of Nvidia unstable quality"all chips are not created equal" is sadly the truth.
PS: wrong=> to say that overclocking means more voltage, undervolting a custom kernel a little can surprisingly reduce heat when you push your CPU to its max,I can have both 1500mhz quadcore and less voltage than stock, as well as less heat (I was surprised, really, on the Sensation I had always found undervolting kinda useless)
PPS: true=> thermal throttle will always come pretty soon and reduce your max speed......
i900frenchaddict said:
Go to Faux123 and read the opening post
http://forum.xda-developers.com/showthread.php?t=1647993
it will teach you about Tegra 3 variants.
Flash Faux123 latest kernel to know what variant you have.
You can have 1.5ghz quadcore minimum, except if you have the poor variant0 of the Tegra 3, and 1.6ghz quadcore max if you have variant 3
So the overclocking you can achieve depends on your Tegra 3 variant, whatever the kernel, don't trust the figures in kernel threads titles, they just give the max if you have variant 3. And the majority of people have variant 1 so limited to 1.5ghz quadcore and there's nothing to do about it, no future kernel can change the way your CPU was manufactured.
Just, SetCPU can display 1.6ghz or more, but if you have variant 0 or 1 it will never use it (CPUspy will say 1550 and 1600 are unused frequencies)
Variant 1 can go upt to 1550mhz but not for quadcore, so who cares....! Same for kernels claiming up to 1.7ghz, it's in single/dual core, so once more, who cares?
What is important is what max speed you can achieve in quadcore, nothing else, and the limits are clearly defined by your Tegra3 variant
"all chips are not created equal" was a silly bull**** invented more than one year ago as an easy answer to noobs claiming they couldn't overclock their dual core at their max. Now, on the One-X and because of Nvidia unstable quality"all chips are not created equal" is sadly the truth.
PS: wrong=> to say that overclocking means more voltage, undervolting a custom kernel a little can surprisingly reduce heat when you push your CPU to its max,I can have both 1500mhz quadcore and less voltage than stock, as well as less heat (I was surprised, really, on the Sensation I had always found undervolting kinda useless)
PPS: true=> thermal throttle will always come pretty soon and reduce your max speed......
Click to expand...
Click to collapse
Nice words and I just won't to add variant 1 can now go to 1.55ghz with faux 07vf I'm currently usein with the lowest most stable undervolt values and less heat than stock kernel and gameplay is amazing also on arhd 9.4
Sent from my HTC One X using xda premium
treebill said:
CPU throttle starts at 85c with thermal TJ-max of 99c.
also there is many debates about this, higher speed need more power which drains battery, but that said it means work gets faster meaning it can idle faster saving power, same the other side slower speeds save power but take longer to get work done using more power.
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Your argument makes sense, but unless the governor is very efficient at controlling the CPU speed very quickly, in most cases your argument doesn’t hold true. For example when playing a game or running a CPU intensive application (where overclocking has any use) the processor works at full speed for the duration of the application.
EDIT: Frankly I don’t see any point in overclocking a phone like One X. I don’t play many games, but the few games I have played ran very smoothly. And if people are overclocking because of the (barely noticeable) laggy UI then overclocking is not a real fix anyway. Installing a custom ROM (perhaps JB), a different launcher, tweaking background apps/services are some of the more sensible and effective things to do instead.
No disrespect to the devs who are working on overclocking, but IMO HTC and nVidia must have spent a considerable amount of time and effort designing the CPU and deciding the optimal operational parameters to maximize performance while minimizing battery drain. Therefore anything out of those parameters (in theory at least) should impact either stability, or battery life. Perhaps the values HTC has decided are not the maximum possible values , because I assume they would have designed the phone to handle few exceptional conditions (i.e: extremely hot weathers). But I think over clocking would probably cause more problems in the long run than whatever the little gains you experience in short term. Just my 2c.
joewong1991 said:
Nice words and I just won't to add variant 1 can now go to 1.55ghz with faux 07vf I'm currently usein with the lowest most stable undervolt values and less heat than stock kernel and gameplay is amazing also on arhd 9.4
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Late reply, I hope you'll read it anyway
I tried faux 007b5, so overclock free too, I had 1.55ghz indeed, but never for quadcore, just for single or dual. Sadly I wasn't able to reach 1.5ghz quadcore but 1.4
With 007u, I have 1.5ghz quadcore, but 1.55 is an unused frequency
Can you check, with tegrastats, if you reach 1.55ghz quadcore or only for 1,2 (or3??) cores?
i900frenchaddict said:
Late reply, I hope you'll read it anyway
I tried faux 007b5, so overclock free too, I had 1.55ghz indeed, but never for quadcore, just for single or dual. Sadly I wasn't able to reach 1.5ghz quadcore but 1.4
With 007u, I have 1.5ghz quadcore, but 1.55 is an unused frequency
Can you check, with tegrastats, if you reach 1.55ghz quadcore or only for 1,2 (or3??) cores?
Click to expand...
Click to collapse
I tried tegrastats and I got 1.55 4 cores for about 20 sec and then 2 shut of and then ran 2 at 1150 playin dead trigger and on cod zombies 2 cores at 1350 witch I find strange faux 0105b
Sent from my HTC One X using xda premium