hy guys,
This is my first post...
My GIO is stable until 806 mhz, if i increase i have freeze and blocks and i must reboot manually... i try all governors and I/O
i have tried the best roms on xda, (actually i use the cm 7 by squad)
and some kernel by phiez, by squadzone..ecc
i know people that OC our GIO to 900 mhz stable, how is it possible? each gio is different?
you have any advice for me?
many thanks
Does it freeze at 844mhz, for example???
Wait.... you're using squadzone rom and phiexz kernel? Phiexz kernel is only for stock rom....
Each processor is different...
Sent from my GT-S5660 using Tapatalk
Every phone differs, so the one can go higher fhen others.. Just need a bit of luck .
And, phiex kernel doesnt work with cyanogen/ext4
Sent from my GT-S5660 using xda premium
i meant say that i tried
7.1 rc3 by phiez
7.2 phiez
7.2 squad
cyano 9 ics
+ other rom...
always the same problem with OC, stable to 806, at 825 the apps restart and some freeze, at 844 i can't slide the menù that the phone freeze...
i'm the usual unlucky with the phone..
can i try some tweaks? or test something?
thanks
albe.minimal said:
i meant say that i tried
7.1 rc3 by phiez
7.2 phiez
7.2 squad
cyano 9 ics
+ other rom...
always the same problem with OC, stable to 806, at 825 the apps restart and some freeze, at 844 i can't slide the menù that the phone freeze...
i'm the usual unlucky with the phone..
can i try some tweaks? or test something?
thanks
Click to expand...
Click to collapse
The only thing you can do is buy a new gio, as you cant modify your arm v6 qualcom cpu to make it more stable , as it is made for 787mhz.
You can tweak etc with scripts, will improve performance, but not your max cpu frequency. Not that that cares, if performance increases
Sent from my GT-S5660 using xda premium
I can get it to 883 without immediately rebooting but my phone jams a lot and i have to do a battery pull. Or is this because I use CM9
LoL, I think I am lucky because my Gio can do 940 MHz and its fully stable, next freq, it reboots.
Sent from my GT-S5660 using xda premium
My phone reboot in 844 mhz its not work higher
Sent from my GT-S5660 using xda premium
Mine lasts whole day on 921 and is perfectly smooth and snappy. On stock.
883mhz is stable for me
Verstuurd van mijn GT-S5660 met Tapatalk
My gio is stable 940Mhz
I think finland gios are best
902 here
Sent from my GT-S5660 using xda premium
902 but very happy with 800, will overclock if i get new phone.
Sent from my GT-S5660
My GIO also runs at 940 most of my apps, but I like it all-round stable, so it has to be 920
You guys are sooo lucky. 900+ MHz?! thats crazy. Mine is perfect stable at 844, but one higher at 864, my phone is so unstable, i cant even get into CPU tuner, without my phone rebooting again haha.
Related
havent tried Ocing in my arc,im curious is it really a big difference
from 1ghz Ocing to 1.4 or higher?and the only way to O/C is to unlocked bootloader and use different kernel?is there a stable and safe frequency?tested in a daily usage..
Well, I'm currently running at 806Mhz, I was previously at 1.2Ghz and to be honest, I don't see any difference.
Sent from my LT15i using XDA App
You may try to flash the DoomKernel on your device. It will give you rootaccess, the possibility to over and underclock. But first you need to unlock your bootloader.
I overclocked my Arc to 1,9ghz Max running for days without any problems. I dont recommend much higher or it will run stuck and you may damage your device.
Only overclock your device when you have a good feeling about it
so does that mean i can't over clock to let's say 1.4 GHz and let it be like that for daily use ? either with DoomLord ROM or CM7 ROM..
mr.alawi said:
so does that mean i can't over clock to let's say 1.4 GHz and let it be like that for daily use ? either with DoomLord ROM or CM7 ROM..
Click to expand...
Click to collapse
You can overclock, but ARE YOU REALLY need 1,8Ghz??? All day.
Stock you had 1Ghz and its already fast.
When you doing some grazy OC lets say 1.9ghz your device may be unstable after that.
Most people using 1,2 or 1,4ghz because its stable and not draining battery a lot.
I use 800-900mhz and very happy.
Whay we always talking overclocking, but not "downclocking"
Edit: doomlord kernel max is 2.0Ghz but dont forget about stock is 1ghz....so 2 times faster BUT not all devices are stable with this insane speed.
CM7 and FXP kernel max 1,6Ghz and its rock solid stable all day and night.
Cheers
Taavi
Sent from my MT15i using Tapatalk
sunbriel said:
Well, I'm currently running at 806Mhz, I was previously at 1.2Ghz and to be honest, I don't see any difference.
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
Agree.
Sent from my MT15i using Tapatalk
From what I've experienced,
If u set the OC in min 1GHz and max 1.8GHz like what I've done, you will notice that ur phone is going smoother.
Well, this is my opinion..
Sent from my LT15i using xda premium
chitose_ndy said:
From what I've experienced,
If u set the OC in min 1GHz and max 1.8GHz like what I've done, you will notice that ur phone is going smoother.
Well, this is my opinion..
Sent from my LT15i using xda premium
Click to expand...
Click to collapse
Minimum 1Ghz....wtf? its draining your battery with light speeds.
I think 245Mhz is good
Cheers
Taavi
Sent from my MT15i using Tapatalk
taaviu said:
Minimum 1Ghz....wtf? its draining your battery with light speeds.
I think 245Mhz is good
Cheers
Taavi
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Yes it drains battery
I mean just to test is there any difference between OC or not.
I'm using min 245GHz and max 1.8GHz
Cheers
Sent from my LT15i using xda premium
from my experience the browser(opera mobile) is smoother.
Sent from my iPhone using Tapatalk
@tyrand3
how much Ghz have you been using?
you using it daily?is it really a big difference?
I overclocked mine to 1.4GHz and use it as daily setup, works smoother and faster.
Min/max 122/1401MHz
Sent from my iPad 2 using Tapatalk
I have cm9 android 4.0.3 and I do an antutu benchmark . I got 1973 point ,but I saw a Romanian boy(like me) with android 4.0.3 and he got 3957 . How it can be possible?
Overclocking, less apps in baclhround, different benchmark app etc..
Sent from my GT-S5660 using xda premium
CM9 was very slow on my gio, switched to CM7 and it almost doubled CPU performance. Anyway I have runned the AnTuTu Benchmark (2.7.3, default test) and I got 2330. Overclocked my gio tho, now I do wonder why he has such a high score.
These are just numbers guys, practicle it could be different
Sent from my GT-S5660 using xda premium
I dont think it's true all the time...for me it isn't.
CM7 would give me about 2150, and CM9 gives be about 2050. A bit les, not to bad. Only overclocked to 825 for stability reasons now, CM7 was done at 844
Hey guys i know this that some guys have reached clock value of 1350 mhzz..
but yesterday i was going through some forum there it was said that defy is capable of reaching 1.9ghz..
and can we damage defy by overclocking to 1350 mhz for a short time..
do post you most stable config reached..
Wow, 1.9Ghz? Maybe if the Defy was kept in liquid nitrogen .
Trimis de pe Defy CM9
vap_66 said:
Wow, 1.9Ghz? Maybe if the Defy was kept in liquid nitrogen .
Trimis de pe Defy CM9
Click to expand...
Click to collapse
it was not overclocked till 1.9..
it is capable of overclocking upto that much..
Sainyam said:
it was not overclocked till 1.9..
it is capable of overclocking upto that much..
Click to expand...
Click to collapse
It can be declared capable only if it reached that value previously, otherwise those are only empty words.
Trimis de pe Defy CM9
may be ..
i am guessing it was declared based on processor power..
though havent seen it my self..
omap3 can handle that much? lol!
Sent from my MB526 using xda premium
I'm actually running my defy at 1.3 GHz with no problems nor any noticeable increase in temperature! @vsel = 64
Sent from my MB525 using xda premium
I've overclocked my defy + to 1.4Ghz @ 70Vsel stable. If I try to OC it further the phone actually starts lagging more and the lagging decreases as voltage is increased
super noob bros said:
I've overclocked my defy + to 1.4Ghz @ 70Vsel stable. If I try to OC it further the phone actually starts lagging more and the lagging decreases as voltage is increased
Click to expand...
Click to collapse
can u post screenshot?
Sent from my MB526 using xda premium
It depends of your rom i think
If its help you click on thanks
sorry bad english
1,3ghz iss possible, but your cpu life gets shorter, because your cpu is too hot whith such a hidg clock!
Sorry for my bad English
Sent from my MB525 CM9 IceCreamSandwich
Now i'm using :
30/400
43/700
54/1100
It's very stable for me
Sent from my MB525 using Tapatalk
These work just fine for me. Very reasonable values considering CPU lifespan and battery drain.
20/300
31/600
44/900
58/1200
If defy can be over clocked to 1.3ghz can't defy + be over clocked above 1.5GHz ?
suhasgudmi said:
If defy can be over clocked to 1.3ghz can't defy + be over clocked above 1.5GHz ?
Click to expand...
Click to collapse
Face palm.
Sent from my MB526 using xda app-developers app
noob Q
how do you overclock on CM10?
I flashed Jellytime rom yesterday, today I found out that I can't overclock at JellyTime rom. Everytime I try to overclock, my phone reboots. What do you think is the cause of this problem?!
How much are you overclocking? Some phones (even if it is the same model) just can't handle it.
First try with small increments, 1.2, then 1.3 and so forth to see what your phone can handle. Run with each increment for a while, couple hours or so. Do not click set on boot in case the selected frequency causes issues.
Remember, Jellytime is quite beta.
Sent from a dream.
1.2ghz. Thats my frequency in every rom I flash. Thanks! I'll do what you said. Hope it works
Sent from my Desire HD using xda premium
denwathappened said:
1.2ghz. Thats my frequency in every rom I flash. Thanks! I'll do what you said. Hope it works
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
You should be able to o/c JT to 1.2 Ghz. I noticed on my phone, that on JT I can't o/c more than 1.2Ghz, but when I flash KangBang kernel 1.9, I am able to o/c up to 1.5Gzh (didn't try more)....
How can I flash kernel? Can you send me a linknpl
Sent at RWY 06, MNL Int'l Airport
I made 1.5Ghz OC on Jelly time and everything was working.
So the question is , what the title is.
I have now cm10 and i did an antutu benchmark , and my score was 3100, but I saw , there are a lot of scores with around 3500..
Can you suggest me a good rom for gaming?
Sent from my MB526 using xda app-developers app
Cm7
Hi,
this rom is very fast nice, tweaked and look very good.
http://forum.xda-developers.com/showthread.php?t=1510063
And this here is new and have to much option to customize.
I test the 11. Edition and no bugs for me.
http://forum.xda-developers.com/showthread.php?t=2101999
any other suggestions?
Sent from my MB526 using xda app-developers app
I'm now using XPERIA D 3.4 i scored, 1364 at antutu, but i'm with overclock at 1.2ghz
cm9 with overclock 1.2 ghz: 3259
And my rom withuot overclock: 3058 here is the link:http://www.htcmania.com/showthread.php?t=540140
Alan Miranda said:
I'm now using XPERIA D 3.4 i scored, 1364 at antutu, but i'm with overclock at 1.2ghz
Click to expand...
Click to collapse
I forgot the link for the ROM, it work for both MB525 and MB526 here is the link:http://forum.xda-developers.com/showthread.php?t=2133698
i got 3449 on Antutu with latest quarx cm10 build and overclock to 1350 mhz
OP there is no best ROM for anything...just test for yourself. Thanks