Is there any mods available for wave 525 like bada 1.2 or 2.0 or something else plz i am stuk with the factory made device.
prashantvrm said:
Is there any mods available for wave 525 like bada 1.2 or 2.0 or something else plz i am stuk with the factory made device.
Click to expand...
Click to collapse
yes there is a custom firmware for wave 525.. its named as zackron firmware..
www dot mediafire dot com/file/bco9a3n2a8x1x3l/ZackronFW download it and flash it via multiloader
Sorry, I have NO device for testing...
But good start is the same we use for S8500/S8530/S8600...
http://forum.xda-developers.com/showthread.php?t=1028714
TriX and Wave_Remaker ...
for access filesystem... :
sTune and TkFileExplorer
Best Regards
Related
can we activate social hub without flashing ?? in wave 1 with bada 1.2
i mean form stune or TkFileExplorer without flashing a new softwear
plzzzzz help me
Yes you can but you have to install your region code after... that will make a reset of your phone, like if you flash a firmware.
thx for reply
could you plzzz explane in steps what i do
my cod is (XSG)
THX AGAIN
some one tell me the steps plzzzzzzzzzzzzzzzzzzzzz
dude,
1. Speak Proper english
2. Use google. It is mentioned on sites how to do it.
my brother changed my bada v1.2 into 2.0...and i didn't like the surprise...i downloaded S8500XXJL2 but i have a gt s8530...it gives me dblk write error without the fota, and dbl erase when i include the fota...someone please help me...i need to revert this today please...T_T
Dude, is it so difficult to use a S8530 ROM? S8500-S8530 do you know the difference?
I hope your phone is not bricked yet.
Try this:
http://hotfile.com/dl/118911503/3ebf648/S8530XXKC1_OXAKC1.rar.html
This is Bada 1.2 Open Europe for Wave II
Otherwise: Happy JointTestActionGrouping
Hello,
I have flashed my M210 to wave II firmware not it works untill the phone goes to stand by mode, once it is into standby mode you can't unlock or wake it up from the dark screen..
am soo screwed,
Please help.
I have flashed many firmwares, the one that comes with Anycall M210 too.. yet the same problem.
any help???
Try official firmware : http://www.hotfile.com/dl/149639410/c232cb0/M210SKRLC1_M210SSKTLC1_SKT.zip.html
I flashed this firmwhere but didn't help, the problem remain the same
What you did...please tell me step by step
Because it is official Bada 2.0 firmware for M210S,there wouldn't be a problem
Firstly, i downloaded both the firmware and the downaloder 6.67
Flashed by selected the files appropriatly
all files successfully flashed successfully except the boot files...
i have to change them with other bootfiles from wave 2 firmware and it was flashed then
but after still is the same problem
it just doean't wake up after it goes into sleep mode ....
even though i have flashed the official firmware yet no hope
anybody ?
all files successfully flashed successfully except the boot files...
i have to change them with other bootfiles from wave 2 firmware and it was flashed then
but after still is the same problem
Click to expand...
Click to collapse
M210S is different as S8530...
TDMB...
If this is no Software feature so maybe few Chips different... maybe little tiny differences in Hardware...
I think you need back BOOTFILES from M210S...
Best Regards
can anyone provide me with a proper bootfiles ?
Nimra Khan said:
can anyone provide me with a proper bootfiles ?
Click to expand...
Click to collapse
Which i gave firmware it is full firmware and bootfiles is in inside
Sometimes Bootloader change is not more easy possible... during Security...
So it could be IMPOSSIBLE with Multiloader alone to jump back to Original M210S Boot...
One Hardcore way would be repair with JTAG...
Best Regards
adfree said:
Sometimes Bootloader change is not more easy possible... during Security...
So it could be IMPOSSIBLE with Multiloader alone to jump back to Original M210S Boot...
One Hardcore way would be repair with JTAG...
Best Regards
Click to expand...
Click to collapse
Yes its not happening with multi loader, tried almost a dozelian times.
I don't know anything about JTAG
http://forum.xda-developers.com/showpost.php?p=13582911&postcount=13
RIFF Box means for instance JTAG... solder wires etc...
Sorry, no other working solution known...
Best Regards
Other direction...
I have S8530 device... to do stupid tests.
I wish I could use M210S Firmware...
Nope... not possible...
1.
Check Screenshot from ML...
Many addresses DIFFERENT... means partition table is not 1:1...
2.
I have tried several combinations with Boot change... but not possible...
dbl Error...
Best Regards
Edit.
Short tested with XPKD6 Boot...
Same result...
Soon I will try bada 1.2 Boot... maybe then more luck to change Boot to M210S...
Btw... M210S Firmware bada 1.x with Bootfiles available somewhere?
Edit 2.
Flashed XXJK2 Boot (bada 1.x)... same result...
It seems not possible with Multiloader to jump back to M210S Bootfiles... or to flash S8530 with M210S Boot...
ONLY as info yet...
Maybe this year chance to fix this...
1.
I have realized during mistake...
I have forgotten to copy dbl.mbn into folder...
That Boot Change also work only with 1 file...
boot_loader.mbn
2.
I have found way to disable RSA 1024 check of Bootloader... Maybe this makes easier to flash back M210S Boot...
But need some time for tests and more investigation...
Best Regards
I have an idea... test later...
In boot_loader.mbn of M210S Firmware is SHW-M210S instead GT-S8530 String...
Warning! Don't try it self. You could brick your handset.
Best Regards
Edit 1.
Summary...
dbl.mbn is 1:1 same file like in S8530 DBT...
Edit 2.
Progress...
Bypassed apps_compressed.bin...
My fault... it seems size check... in last 1024 Byte aka end.bin...
Now I have taken from bigger file XPKD6...
Now I need to wait for *.app and CSC finish... then I'll post result...
Edit 3.
Code:
Download Start Ch[0]
FOTA 1817.7KB OK[0.9s]
Amss 13276.7KB OK[5.2s]
Apps 27000.8KB OK[12.7s]
Rsrc1 38797.3KB OK[14.8s]
Rsrc2 2987.3KB OK[1.4s]
FFS 191692.8KB OK[340.4s]
SHPAPP 191152.1KB OK[266.4s]
CSC 58662.9KB OK[106.7s]
-deleted -
Noobish question was here
did you flashed wave 3 firm. to wave 2? are your device can boot?
Click to expand...
Click to collapse
Wave 3 aka S8600 is COMPLETE different.
S8530 and M210S are similar... minor differences in Hardware...
S8500 is in this "Family Group"...
Simple check only folder BOOTFILES...
2 files for S8500,S8530,M210S:
Code:
boot_loader.mbn
dbl.mbn
Now look into S8600 XXKJC for instance has all files...
I can see 4 files, 2 more then the other group has...
Best Regards
adfree said:
Edit 2.
Progress...
Bypassed apps_compressed.bin...
My fault... it seems size check... in last 1024 Byte aka end.bin...
Now I have taken from bigger file XPKD6...
Now I need to wait for *.app and CSC finish... then I'll post result...
Edit 3.
Code:
Download Start Ch[0]
FOTA 1817.7KB OK[0.9s]
Amss 13276.7KB OK[5.2s]
Apps 27000.8KB OK[12.7s]
Rsrc1 38797.3KB OK[14.8s]
Rsrc2 2987.3KB OK[1.4s]
FFS 191692.8KB OK[340.4s]
SHPAPP 191152.1KB OK[266.4s]
CSC 58662.9KB OK[106.7s]
Click to expand...
Click to collapse
Bypassed apps_compressed.bin...
How did you do ?
BTW phone boot now ?
Nice progress
BTW phone boot now ?
Click to expand...
Click to collapse
No.
Maybe my mistake is end.bin from XPKD6 for apps_compressed.bin...
Also I have removed some Security with TriX...
http://forum.xda-developers.com/showpost.php?p=37540321&postcount=263
S8530 seems not accept or load apps_compressed.bin from M210S ...
Tests with Debug high in RC2 file no Bluescreen...
Bootloader I have taken from XXLA1 DBT...
Maybe I should try also Boot from XPKD6...
Will make more tests next days...
Best Regards
Edit 1.
apps_compressed.bin from KRLC1 is exact:
Code:
27001856 Byte ([B]25,8 MB[/B])
XPKD6 was bigger... but maybe not good for XXLA1 Boot...
Will check now other files for best end.bin...
Edit 2.
I have forgotten KRLF1 from M210S, but same result...
---------- Post added at 05:16 AM ---------- Previous post was at 04:19 AM ----------
Little progress with XPKD6 Boot...
Now CSC is not possible in Multioloader...
But I see progress bar moving in RC2 like on S8000 Jet...
I will create CSC with Wave_Remaker... and check again RC2 with Debug Level High...
Later more.
Best Regards
Edit 3.
Compared short *.so files... seems no Radio in M210S ?
Many *.so files more or different... Maybe interesting for study...
hello,
i know that this isn't the right place for my question but i didn't find a forum dedicated to the same of my problem.
so my phone samsung wave s8500 running bada got the download mode in the boot.
when i on my phone i get just the download mode even if i did not press the combo keys power vol down camera buttons. i got always on the download mode and my phone dont want to start
i triyed to unbrik him using multiloaders v5.65 and upload all required fils succefully but always the same problem
so ??? do think that a hardware problem ??
please help me it's urgent
thanks in advance
ANY HELP???
Multiloader shows Errors?
Which Firmware you have tried?
XXLA1 for instance... bada 2...
Status before?
Working?
Or you bought in used condition... unknown status?
In other words...
More details please.
Attach Screenshot from Multiloader for instance...
Btw.
"Latest" Multiloader is 5.67
Best Regards
thanks for the best reply friend
firmware : S8500XPKG5 bada. downloaded from multiloader via download mode
status before : work normal
it was normal, i don't know what happened
when i uploaded the fota + boot files via this topic, i got an orange screen, then a green message appeared ' upload data to pc '
what can i do ?
hello echopros
if you have upload data to pc you wave is in download mode so you can upload the firmware with multiloader
( sometime when you change from bada1 to bada 2 the upload stop after the bootfile and you have this message )
1.
XPKG5 is OLDEST leaked bada 2 Firmware...
Google for XXLA1 DBT for instance...
2.
upload data to pc
Click to expand...
Click to collapse
This is NOT Download Mode... only as info...
http://forum.xda-developers.com/showthread.php?t=1176189
Download XXLA1
Then use Multiloader 5.67
ALL files including BOOTfiles...
Best Regards
---------- Post added at 04:11 PM ---------- Previous post was at 03:46 PM ----------
Here is good source for S8500 Firmware:
http://netfolder.in/folder.php?folder_id=M4w7E4h
Try S8500XXLA1_v2.0_DBT.zip
http://netload.in/datei5Usrafz3Cv.htm
Then feedback please...
Best Regards
yakapa40 said:
hello echopros
if you have upload data to pc you wave is in download mode so you can upload the firmware with multiloader
( sometime when you change from bada1 to bada 2 the upload stop after the bootfile and you have this message )
Click to expand...
Click to collapse
i know and i uploaded all needed files but no success i'll try what Adfree said and i'll told you the results
thanks all for replies
adfree said:
1.
XPKG5 is OLDEST leaked bada 2 Firmware...
Google for XXLA1 DBT for instance...
2.
This is NOT Download Mode... only as info...
http://forum.xda-developers.com/showthread.php?t=1176189
Download XXLA1
Then use Multiloader 5.67
ALL files including BOOTfiles...
Best Regards
---------- Post added at 04:11 PM ---------- Previous post was at 03:46 PM ----------
Here is good source for S8500 Firmware:
http://netfolder.in/folder.php?folder_id=M4w7E4h
Try S8500XXLA1_v2.0_DBT.zip
http://netload.in/datei5Usrafz3Cv.htm
Then feedback please...
Best Regards
Click to expand...
Click to collapse
i know that upload data to pc massage not download mode
but i told you that when i was in download mode and have uploaded just boot files + fota from the link that in the forum i got this message
when i upload all files check LSI . boot change . full download . master ROM
message appeared after download " All files complete "
the probleme
my phone didn't restart after download
and when i unplug the battery and plug it again and power the phone always the same problem i got in download mode again
Only to be sure.
Check this Picture:
http://forum.xda-developers.com/showpost.php?p=44783328&postcount=4
Its from S8530... but...
S8500 looks similar.
All files complete ? Look on right site...
Normally you have nothing to set... accept Full Download to choose all files including Boot...
If all files from XXLA1, then ONLY flash this RC2:
http://forum.xda-developers.com/showpost.php?p=44791652&postcount=9
Now maybe more infos available. Like this.
http://forum.xda-developers.com/showpost.php?p=44803131&postcount=10
See Blue Screen Picture...
Btw.
Your Windows Version is what?
Win 7 64 bit ? ?
Best Regards
I did the same job exept I choose Master download. Ok I will try againe like the picture. Thanks adfree for your help. See you
adfree said:
Only to be sure.
Check this Picture:
http://forum.xda-developers.com/showpost.php?p=44783328&postcount=4
Its from S8530... but...
S8500 looks similar.
All files complete ? Look on right site...
Normally you have nothing to set... accept Full Download to choose all files including Boot...
If all files from XXLA1, then ONLY flash this RC2:
http://forum.xda-developers.com/showpost.php?p=44791652&postcount=9
Now maybe more infos available. Like this.
http://forum.xda-developers.com/showpost.php?p=44803131&postcount=10
See Blue Screen Picture...
Btw.
Your Windows Version is what?
Win 7 64 bit ? ?
Best Regards
Click to expand...
Click to collapse
My windows is 8
Shall I do it in 7 or XP ?
I have NO Win 8 experiences...
Not tested.
Also never tested on 64 bit System...
32 bit XP 10000000 % working for me. :angel:
Before you try on other Windows...
Check RC2 file ONLY to flash.
http://forum.xda-developers.com/showpost.php?p=45210653&postcount=11
Maybe S8500 shows Bluescreen.
Maybe Memory damaged like this:
http://forum.xda-developers.com/showthread.php?t=1398528
Blue Screen can show hints like this:
Code:
Type : Unofficial Version
Number : 1243
Builder : superuser
Host : S1-AGENT08
Date : 2012/01/05
Time : 19:21:46
Size : 42730876 bytes
CheckSum : 0xf4e364eb
View :
S/W version:S8500+XX+LA1
Modem:Q6270B-KPRBL-1.5.45T
SHP:VPP R5 2.1.1
Build Host:S1-AGENT08
BuildAt:2012/01/05 19:21:46
App Debug Level : 0
Data Abort!Page Translation Fa
ult for (0x6c92d214) Read Acce
ss Detection
<Callstack information>
PC = 404327A6 _printf_str
LR = 404317F1 __printf
<Mocha Task Callstack>
__printf
_printf_char_common
_snprintf
_MemGetCurrentlyAllocatedMemLi
stEx
OemBmShutdown
__WmEventHandlerProc
__WmProcessEventInternal
WmProcessEvent
__BootTimerCallback
__WmProcessTimerEvent
__WmProcessEventInternal
WmMainLoop
MochaTask
ALL HW Information:
HW VERSION : S8500_REV07
IMEI VERSION : Not Active
Best Regards
yes you'r right MAN
the windows 8 does not work with the flash correctly
it's ok now the problem has been solved thank you very very much adfree
big thanks
so happy now
this is the best forum
i love it
hello friends
after download and all done with success some pads does not work correctly for example
clicking on call pad = going to camera
on midium pad : a message appeared ''captured'' then the screen freeze up ??
lock pad does not work anymore
Can you check label under battery...
Is this Retail device?
Or looks like this...
http://forum.xda-developers.com/showpost.php?p=43475042&postcount=11
Best Regards
adfree said:
Can you check label under battery...
Is this Retail device?
Or looks like this...
http://forum.xda-developers.com/showpost.php?p=43475042&postcount=11
Best Regards
Click to expand...
Click to collapse
the same phone and same details
i changed the rom by an other from a website http://tizenhub.com/2012/01/official-bada-2-0-firmware-s8500xxla1.html
then when all complete the keypad camera work but as volume, and the lock pad as camera ????¿¿¿¿ lol what happened to my mobile hehhe
the same phone and same details
Click to expand...
Click to collapse
You mean you have an NOT for Sale handset?
An prototype S8500 ?
Best Regards
Hi. Just experimented with a costom ROM on my wave GT-s8500, but that was to slow for me. Is it possible to go back to Bada 2.0 again? Anyone know how? And where i can get my hands on the Bada software(files)... ? Thanks!
Files Bada 2 can be found in the next section or on the website sammobile.com
Then use Multiloader 5.65 - https://yadi.sk/d/-k9MOtJIYBhbh
Hey, thanks for your reply. I can only find Bada for Wave II, not Wave I, which I need...
https://forum.xda-developers.com/showpost.php?p=63179699&postcount=40