[Q] Help, micro sdhc not working!! - Galaxy Y GT-S5360 General

Help, please, after flashing the merruk kernel 1.0, my sdhc is not working....

which rom ur using?

im using the stock rom, 2.3.6...

remove your sd and try it again.

sunilvyas said:
remove your sd and try it again.
Click to expand...
Click to collapse
Yeah, i try it, i formated the sd to NTFS, FAT32 and exFAT, but ain't not working.

Are you certain that the sd card is working? Have you tried to read it your PC using a card reader? Could you try another card in your phone?
Sent from my GT-S5360 using XDA

Dude, some kernel version have issues, its still under development..flash back to stock kernel via Odin

Flash it to stock kernel again ... And wait for a stable custom kernel to be released ...
Sent from my GT-S5360 using XDA

New kernal released
Sgt.Peppers. said:
Help, please, after flashing the merruk kernel 1.0, my sdhc is not working....
Click to expand...
Click to collapse
TRY THIS http://forum.xda-developers.com/showthread.php?t=1550065 PLEASE DOWNLOAD boot_0.7.50_RC_20.tar PLEASE DONT DOWNLOAD boot_0.8.00_RC_10.tar

Sgt.Peppers. said:
Yeah, i try it, i formated the sd to NTFS, FAT32 and exFAT, but ain't not working.
Click to expand...
Click to collapse
Dude.that is not a proper way to format our sd card
Im using minitool partition application.U need to install that with your pc.Use google search for that app.
>Use card reader if u choose minitool partition method
>1st partition format must be fat32 (so tht your pc and phone can read it)
>2nd format ext3 (this is for a2sd and link2sd)
>3rd format will be linux swap. (currently a2sd swap function still unavailable.It dependent with kernel support)
Here is video link from youtube for your guidance.FYI im using terma and buzz kernel

Hey, thanks a lot. The problem is on the kernel, i flashed the rom again and flash the kernel 0.7.50 rc20 and no problem.
Thanks for everyone

Related

[Q] SD partitioning!?

Hi,
I have been googling an searching in this forum all seem to get is ooold posts...
My issue is partitioning my SD since the internal memory disappears like yesterday. From what I have found the proper way to do this is to connect the SD to external device ---> boot linux and do it in gparted (Ubuntu 11.04 liveCD).
Yeah, that work like a charm... NOT... well actually it partitions the fat32 and ext4 partition... not problem but when I try to mount the ext4 partitions it doesnt work! I presume it suppose to work...
The other thing I tried was to partition with clockwork recovery, that to worked fine but no partition.
- Hope I understand this correct but if one would partition in clockwork recovery I would be able to see this partition in gparted when done, right?
- And when I start to partition the SD I should have one fat32 partition consumes the whole SD or should I leave the size of ext4 unpartitioned?
Can someone pretty please guide me thrue this please... and before you say it Yes I have found previous guides about this but not work for me...
What is the latest Clockwork recovery and Amon RA recovery?
- Which one work best with partitioning?
Oh, I should perhaps mentions what phone and ROM....
Phone: HTC Desire
SD: Sandisk 32GB class 6
ROM: GingerBurst (seems good) or if somebody have any other suggestion... like sence and weather widget....
CRzz said:
What is the latest Clockwork recovery and Amon RA recovery?
- Which one work best with partitioning?
Click to expand...
Click to collapse
Check out the recovery in my signature.
Hi,
I also had loads of probelms with this...
If you want to partition you SD card via recovery i strongly recommend AmonRA.
If partitioning via gparted didn't work for your sdcard (which is odd...) i recommend using a simple Windows app called MiniTool Partititoning Wizard (it's free)...so just dl that app,enable usb debbuging on your Desire,plug in the phone,run the app, and follow this simple video tut> http://www.youtube.com/watch?v=aCV7Eu1pjWQ
k3lcior said:
Check out the recovery in my signature.
Click to expand...
Click to collapse
Wow... I did.... flashed that recovery...at the moment I am flashing ROM.
Will let u know if it works, noticed that the recovery always say that my sd-ext partition is unformated everytime when I start it... thats odd.
I will let u know if it works.
BIG thank you this far!
Oh, I must forgotten to post what happened...
I was not able to flash new Rom with my 32gb SD but when I tried my 4gb SD card it worked fine. I would guess that there is something wrong with my SD card. I shall buy a new one and se what happens...
Sent from my HTC Desire using XDA App
CRzz said:
Oh, I must forgotten to post what happened...
I was not able to flash new Rom with my 32gb SD but when I tried my 4gb SD card it worked fine. I would guess that there is something wrong with my SD card. I shall buy a new one and se what happens...
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Before doing that make sure that both your partitions are primary and you have unchecked the "Take ownership of filesystem" option in Disk Utility from Ubuntu.
paul.c said:
Before doing that make sure that both your partitions are primary and you have unchecked the "Take ownership of filesystem" option in Disk Utility from Ubuntu.
Click to expand...
Click to collapse
Thats something new... I didn't see anything about that in the guides. Can that option give me my issues if enabled?
Which if the two default partitioning tools are you referring to in Ubuntu?
Sent from my HTC Desire using XDA App
CRzz said:
Thats something new... I didn't see anything about that in the guides. Can that option give me my issues if enabled?
Which if the two default partitioning tools are you referring to in Ubuntu?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I only know gparted (gnome partiton editor).
MatDrOiD said:
I only know gparted (gnome partiton editor).
Click to expand...
Click to collapse
Muuu... No change there....

[Q] Enable Link2SD or A2SD?

Anyone know how to enable and install Link2SD or DT's A2SD on a stock rom? I know Darkshado's method, when you need to flash simpligio without the modem. But is there a way without flashing another rom? I'm also aware of enabling of enabling A2SD for the Galaxy Ace but if I try this on my Gio, will it be safe??? Please help. Thanks for your time!
Hi,
I'm using stock froyo 2.2.1 (S5660DXKC3), rooted and using link2sd.
It very easy to install the link2sd. i suggest using class 10 microsd. Here is the step:
1. Using a PC/laptop, create 2 partition in microsd, 1st is fat32, 2nd is ext2. Set both are primary partition. i use the partition wizard home edition (is free)
2. Set the 2nd partition size not more than 1 Gb, i heard that it will cause an error if more than 1 Gb. Mine are set to 0.8 Gb.
3. Root your phone, i'm using super one click
4. Install link2sd from market
5. Insert your microsd to your phone
6. Start link2sd, it will ask for the 2nd partition. pick the ext2
7. Reboot/restart your phone
If you want to use A2sd on stock rom, use must use modified boot.img. A2sd can't work on standard boot.img (CMIIW)
And use custom kernel
Sent from my GT-S5660 using xda premium
Peteragent5 said:
Anyone know how to enable and install Link2SD or DT's A2SD on a stock rom? I know Darkshado's method, when you need to flash simpligio without the modem. But is there a way without flashing another rom? I'm also aware of enabling of enabling A2SD for the Galaxy Ace but if I try this on my Gio, will it be safe??? Please help. Thanks for your time!
Click to expand...
Click to collapse
To enable link2SD or a2SD on 2.2 it is very easy.but on gingerbread,you need to flash a custom kernel(such as phiexz's kernel),because of the kernel doesn't support init.d script.
失败的中国人正在尝试提高!
Yes thank you all for your reply! But after one year with no reply I figured this out on my own! lol Thanks anyway guys!!
Peteragent5 said:
Yes thank you all for your reply! But after one year with no reply I figured this out on my own! lol Thanks anyway guys!!
Click to expand...
Click to collapse
Can you please outline this process. Thanks.
FusiveR said:
Can you please outline this process. Thanks.
Click to expand...
Click to collapse
Yes helllp! I used the cwm recovery to make a 1gb ext partition. But i have no option sd: ext3>ext4... I 'successfully' installled a2sd regardless... But a2sdgui doesnt recognize it and i cant use a2sd commands in terminal! I have a 32gb class 4 transcend card... Where am i going wrong?
FusiveR said:
Can you please outline this process. Thanks.
Click to expand...
Click to collapse
db416 said:
Yes helllp! I used the cwm recovery to make a 1gb ext partition. But i have no option sd: ext3>ext4... I 'successfully' installled a2sd regardless... But a2sdgui doesnt recognize it and i cant use a2sd commands in terminal! I have a 32gb class 4 transcend card... Where am i going wrong?
Click to expand...
Click to collapse
Use a SD card reader!! Not from your phone!! Also you need custom kernel.
Ok first partition your SD card. Use the program call MiniTool Partition Wizard. This is on your PC. There are guides all over the web for this but I'll sum it up for youse. Make a SD-EXT with the options > Primary > Ext4 > 4Kb Cluster size
Download Darktremor's A2SD and put in the root of your SDcard. Once done plug SD back to phone. Make sure phone is off. Enter recovery and find the a2sd zip and flash. Reboot the phone and it will bootloop for maybe 2 times. Then it should have installed a2sd correctly!!
Hope this helps
merci! I DO indeed have a custom kernel (ArpegGioMod ftw) but I bit the bullet and installed Link2SD, and it seems to be performing okay.. slightly sluggish fps with Mupen64, but nothing a little OC can't fix. lol
Just for your information, you don't need to have a custom kernel for Link2SD.
I'm using it with 2 primary fat partitions on (rooted) stock 2.3.4.
And It's working like a charm.
Has anyone noticed that on a reboot link2sd starts to relink apps and sometimes some apps are removed from the phone. I have always experienced this and I have reinstalled link2sd many times, but the problem still persists.

[Q]link2sd

hello THERE
i just want to ask what the best ext2 or ext 4 for link2sd??
I use ext2. Don't really know the difference between the two. o-o
slicktrick22 said:
hello THERE
i just want to ask what the best ext2 or ext 4 for link2sd??
Click to expand...
Click to collapse
the best would be ext4, as it is the most recent and allows faster data transfers but the downside of it is that some roms may not support it meanwhile ext2 is more of the universal type; widely used format.
ps: you can play safe by choosing ext3 instead
i just read other forums thats ext 4 is much better...but i dont remeber the forum link....
EXT2 is old
EXT4 may not work on some ROMs but blazing speed
EXT3 safe and fast.
PS. Don't risk repartitioning your SD with EXT4 just because it is the fastest. Choose to EXT3.
Sent from my GT-S5360 using xda premium
like it
hehe . ..
ext3 will be sufficient for now.
ext4 requires kernel support... still then if you want that try merruk's kernel, it supports ext4
Millan.SIS said:
ext3 will be sufficient for now.
ext4 requires kernel support... still then if you want that try merruk's kernel, it supports ext4
Click to expand...
Click to collapse
Tried merruk's kernel before, didn't work for me. Any idea how to make it work? I already have 1 custom bin count, don't wanna add another 1 for nothing.
Sent from my GT-S5360 using xda premium
CarlDeanCatabay said:
Tried merruk's kernel before, didn't work for me. Any idea how to make it work? I already have 1 custom bin count, don't wanna add another 1 for nothing.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
backup ur data
Use cwm » advanced» partition sdcard....
Make one ext3 partition less than 512mb & the rest fat32
Ext3 will be used as the extended internal memory for linking apps
fat32 will be mounted as your sdcard
Now reboot
Open link2sd, it will ask you for mount script » select ext3
Select settings » auto link...
now all set
Written this in brief..
For kernel flash use mai77 method
No bin count as it'll flash using cwm
Millan.SIS said:
backup ur data
Use cwm » advanced» partition sdcard....
Make one ext3 partition less than 512mb & the rest fat32
Ext3 will be used as the extended internal memory for linking apps
fat32 will be mounted as your sdcard
Now reboot
Open link2sd, it will ask you for mount script » select ext3
Select settings » auto link...
now all set
Written this in brief..
Click to expand...
Click to collapse
Partitioning my SD Card via CWM doesn't work for me. I use Mini Partition Magic. Still not working.
Sent from my GT-S5360 using xda premium
what is bin count???
what will happen if bin get high like 5, 6, 7?
CarlDeanCatabay said:
Partitioning my SD Card via CWM doesn't work for me. I use Mini Partition Magic. Still not working.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
What do you mean by "doesnt work"? Are you not getting the option to mount the 2nd partition in Link2SD?
mrdoods said:
what is bin count???
what will happen if bin get high like 5, 6, 7?
Click to expand...
Click to collapse
It is an indication that you flashed a firmware which is non-stock .. in some samsung service centres warranty will not be considered if you have bin count..In only few countries though as no one cares to check them and they either dont have the knowledge to check them..all they know is "KIES" xD
I have a bin counter of 62 ..nothing happens..Just flash them freely
hitme987 said:
What do you mean by "doesnt work"? Are you not getting the option to mount the 2nd partition in Link2SD?
Click to expand...
Click to collapse
can i aks? i made a ext2... then when i try to move my apps using link2sd its not working then i use a2sd it its "not enough space" i check to mini tool its empty and i try BTE ($ su a2sd cachesdreset) its said no ext mounted.. i try to reformat but its still the same.. now using internal memory..
hitme987 said:
It is an indication that you flashed a firmware which is non-stock .. in some samsung service centres warranty will not be considered if you have bin count..In only few countries though as no one cares to check them and they either dont have the knowledge to check them..all they know is "KIES" xD
I have a bin counter of 62 ..nothing happens..Just flash them freely
Click to expand...
Click to collapse
+1 thanks...
mrdoods said:
can i aks? i made a ext2... then when i try to move my apps using link2sd its not working then i use a2sd it its "not enough space" i check to mini tool its empty and i try BTE ($ su a2sd cachesdreset) its said no ext mounted.. i try to reformat but its still the same.. now using internal memory..
+1 thanks...
Click to expand...
Click to collapse
Hmm...which ROM are you using?
You must use a custom ROM having a2sd darktremor enabled to enable a2sd..
Im not sure about L2SD..But I can guide you...Did you get a "Mount 2nd Partition" message when you first run L2SD? Otherwise Click Left touch button-> Click More -> Click the "Recreate mount Scripts" On Link2SD and restart your device..
Go to any installed user application and on bottom it shows " Create Link" ..Press that and if it continues to show linking options then you have L2SD perfectly working..
hitme987 said:
Hmm...which ROM are you using?
You must use a custom ROM having a2sd darktremor enabled to enable a2sd..
Im not sure about L2SD..But I can guide you...Did you get a "Mount 2nd Partition" message when you first run L2SD? Otherwise Click Left touch button-> Click More -> Click the "Recreate mount Scripts" On Link2SD and restart your device..
Go to any installed user application and on bottom it shows " Create Link" ..Press that and if it continues to show linking options then you have L2SD perfectly working..
Click to expand...
Click to collapse
I use creed and chobits... now i use repencis that have tutorial of BTE...
i try later to flash creed and use your guide L2SD..
mrdoods said:
I use creed and chobits... now i use repencis that have tutorial of BTE...
i try later to flash creed and use your guide L2SD..
Click to expand...
Click to collapse
For this to work you need to have a secondary partition of ext3/ext2 ..ext3 is preferred..Use CWM to repartition the SD card..
Creed and repencis supports both a2SD and L2SD ..chobits supports L2SD..
You can try this guide by CarlDeanCatabay which describes the L2SD process:
http://forum.xda-developers.com/showthread.php?t=1614700
I prefer L2SD over A2SD as L2SD has more advanced options..
Got it working with chobitsdigitalis v1.6 ROM + stock kernel. SD Card partitioned Ext3, dunno why it doesn't work with merruk's kernel.
Sent from my GT-S5360 using xda premium
CarlDeanCatabay said:
Got it working with chobitsdigitalis v1.6 ROM + stock kernel. SD Card partitioned Ext3, dunno why it doesn't work with merruk's kernel.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
merruk kernel supports only ext4 and it has some bugs..he is uploading a new version so expect a new one soon!
how about other kernel... or only stock kernel work on chobits for l2sd

Can't Format to Ext4

i try to partition my sdcard to ext4
with amonra recovery i try to partition to ext2 - ext3 and then ext3 - ext4
when formating to ext3 i can mount the sdcard , but when i formating to ext4, sdcard wont mounting.
and i can't make a2sd programs works well.. as well in Titanium Backup ext partition not show.
can all u help me?
#sory my bad english
EDIT: i'm using sandisk ultra 8gb class 10 sdcard
seethegoeh said:
i try to partition my sdcard to ext4
with amonra recovery i try to partition to ext2 - ext3 and then ext3 - ext4
when formating to ext3 i can mount the sdcard , but when i formating to ext4, sdcard wont mounting.
and i can't make a2sd programs works well.. as well in Titanium Backup ext partition not show.
can all u help me?
#sory my bad english
Click to expand...
Click to collapse
Go to 'mount' in Recovery, mount /sdcard, and try again.
MBQsniper said:
Go to 'mount' in Recovery, mount /sdcard, and try again.
Click to expand...
Click to collapse
already tried but still can't mount..
is evo can read ext4 partition? or only ext3?
which one is better, ext3 or ext4?
are u using ext4 partition? how do you do it?
Are you on a kernel that supports ext4?
ca1ne said:
Are you on a kernel that supports ext4?
Click to expand...
Click to collapse
i dunno about that..
but i'm using EnergyRom with ChopSuey kernel..
so not every kernel can supports ext4?
which kernels should I use for my supersonic to supports ext4?
I know the Mason kernel supports ext. 4. Read the OP for the ROM you're using and make sure ext. 4 is supported.
Sent using my HTC EVO 4G and a magic wand
seethegoeh said:
i dunno about that..
but i'm using EnergyRom with ChopSuey kernel..
so not every kernel can supports ext4?
which kernels should I use for my supersonic to supports ext4?
Click to expand...
Click to collapse
If its a sense rom only underworld kernel and classic kernel support ext 4 and if its aosp rom mostly every kernel supports it.
Sent from my PC36100 using xda app-developers app
Scratch what I said above. I forgot Energy is a Sense ROM, so you'll need a Sense ROM that supports ext. 4, assuming it's supported by the ROM.
Sent using my HTC EVO 4G and a magic wand
FinZ28 said:
Scratch what I said above. I forgot Energy is a Sense ROM, so you'll need a Sense ROM that supports ext. 4, assuming it's supported by the ROM.
Sent using my HTC EVO 4G and a magic wand
Click to expand...
Click to collapse
All roms with a2sd support it and that's most roms all you need is kernel support
Sent from my PC36100 using xda app-developers app
evo4gnoob said:
All roms with a2sd support it and that's most roms all you need is kernel support
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
ok il'll try to try another kernels..
but the problems is, the sdcard won't mount in recovery menu when format to ext4..
if i format to ext2 or ext3, recovery can mount sdcard..
so.. what is the problems? recovery or kernels? who that make the sdcard can't mount...
seethegoeh said:
ok il'll try to try another kernels..
but the problems is, the sdcard won't mount in recovery menu when format to ext4..
if i format to ext2 or ext3, recovery can mount sdcard..
so.. what is the problems? recovery or kernels? who that make the sdcard can't mount...
Click to expand...
Click to collapse
1. Maybe your card doesn't support ext3 or
2. Format the whole card after you back up everything on it. Then do the partion and then move everything back to the SD card
3. Update ext1 to ext2
4. Wipe using superwipe or whatever method you use, flash the rom, same session flash your kernal underworld number 8 for your sense rom, then same session flash your apps2sd script I use cronmod INT2EXT4+ it moves your partion to your internal memory and I have 900mb on my internal memory 300 apps installed and 400mb of internal memory left and because its internal my phone is fast as hell with no lag.. then reboot and take a look around to see if the script stuck.. if so then get rid of armon installer use smelkous recovery you can go back into it and update your partion without having to format your SD card again.. so then you would update to ext3 but you may have to uninstall your app2sd script and then reflash it once you get your ext4 up and running.. I will link cronmod so you can read the op he also has a app2sd script as well
Sent from my PC36100 using Tapatalk 2
---------- Post added at 08:20 AM ---------- Previous post was at 08:20 AM ----------
http://forum.xda-developers.com/showthread.php?t=1716124
Sent from my PC36100 using Tapatalk 2
monty_python said:
1. Maybe your card doesn't support ext3 or
2. Format the whole card after you back up everything on it. Then do the partion and then move everything back to the SD card
3. Update ext1 to ext2
4. Wipe using superwipe or whatever method you use, flash the rom, same session flash your kernal underworld number 8 for your sense rom, then same session flash your apps2sd script I use cronmod INT2EXT4+ it moves your partion to your internal memory and I have 900mb on my internal memory 300 apps installed and 400mb of internal memory left and because its internal my phone is fast as hell with no lag.. then reboot and take a look around to see if the script stuck.. if so then get rid of armon installer use smelkous recovery you can go back into it and update your partion without having to format your SD card again.. so then you would update to ext3 but you may have to uninstall your app2sd script and then reflash it once you get your ext4 up and running.. I will link cronmod so you can read the op he also has a app2sd script as well
Sent from my PC36100 using Tapatalk 2
---------- Post added at 08:20 AM ---------- Previous post was at 08:20 AM ----------
http://forum.xda-developers.com/showthread.php?t=1716124
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
Nice..I will test it..
Big thanks..
Edit: how do I know that my sdcard was formated to ext2/ext3 or ext4?
Sent from my PC36100 using xda premium
seethegoeh said:
Nice..I will test it..
Big thanks..
Edit: how do I know that my sdcard was formated to ext2/ext3 or ext4?
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Just look for smelkous 4.2 I believe it is, I think its pretty str8 forward as far as ext upgrades if its capable of being upgraded to ext3 or ext4, but not all SD cards can be updraded to ext 3 or 4
Sent from my PC36100 using Tapatalk 2
monty_python said:
Just look for smelkous 4.2 I believe it is, I think its pretty str8 forward as far as ext upgrades if its capable of being upgraded to ext3 or ext4, but not all SD cards can be updraded to ext 3 or 4
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
I mean, how to detect that my sdcard in ext4 partition position? Any apps to detect that?
Sent from my PC36100 using xda premium
Use terminal emulator
Type su, hit enter
Then, a2sd check.
Should tell you your ext
An enviousOG

[Q] SD EXT partition.. Link2SD or App2Ext.. problems with mounting.

I rooted my desire 816 [still running the stock rom] and I wanted to try link2sd so I partitioned my SD card and created an ext4 primary partition.. opened link2sd app,installed mount scripts and restarted the phone but the ext partition is still unmounted.. tried ext2 but ended up with the same result!
searched a lot but found so many confusing topics that got me more confused!
what should I do to get the ext partition to be mounted on boot?!
also is app2ext better than link2sd? if so, then how to install it too?
thank you guys in advance..
mohammed fayed said:
I rooted my desire 816 [still running the stock rom] and I wanted to try link2sd so I partitioned my SD card and created an ext4 primary partition.. opened link2sd app,installed mount scripts and restarted the phone but the ext partition is still unmounted.. tried ext2 but ended up with the same result!
searched a lot but found so many confusing topics that got me more confused!
what should I do to get the ext partition to be mounted on boot?!
also is app2ext better than link2sd? if so, then how to install it too?
thank you guys in advance..
Click to expand...
Click to collapse
Check this video.
http://youtu.be/vhUBLhdgSPU
The video maker Potent Technologies has a .zip file available from kinghunki that automatically adds the wp_mod.ko file and the permissions on boot with one flashable zip via custom recovery.
Link in the description of the video.
Sent from my 710C using XDA Free mobile app
jaysoblitzed said:
Check this video.
http://youtu.be/vhUBLhdgSPU
The video maker Potent Technologies has a .zip file available from kinghunki that automatically adds the wp_mod.ko file and the permissions on boot with one flashable zip via custom recovery.
Link in the description of the video.
Sent from my 710C using XDA Free mobile app
Click to expand...
Click to collapse
Thanks! but I think the zip file is for enabling SD card write permissions only..
my problem is that the EXT partition I created doesn't mount on boot and I don't know how to enable that since I'm on stock rom not a custom one..
I am having the same problem. I even flashed that zip but It didn't help.
I had read somewhere that the Exp partition size should be 20% of the microSD card size at most. is it relevant here?
I've also made a Linux swap. the order of my partitions is :
1. fat 32 :15 GB primary, Active
2. Ext4 :now 5 GB primary (It would fail mount with Ext3)
3. Linux Swap : 1.5 GB
seekfind said:
I am having the same problem. I even flashed that zip but It didn't help.
I had read somewhere that the Exp partition size should be 20% of the microSD card size at most. is it relevant here?
I've also made a Linux swap. the order of my partitions is :
1. fat 32 :15 GB primary, Active
2. Ext4 : 12.5 GB primary (It would fail mount with Ext3)
3. Linux Swap : 1.5 GB
Click to expand...
Click to collapse
that zip is for re-enabling writing permissions on SD card which is disabled in KitKat by default.
------
you don't need that much for the ext partition.. it should be no more than 20% of the SD card size.
I guess you made the ext this size because of games, right? you should use foldermount instead.. It's AWESOME!!
------
I have a stock rom and I don't intend to flash any custom rom but a stable lollipop rom.
------
I have no problems with partitioning my SD card at all, my problem is how to add "Init.d" support in my stock rom to be able to mount my ext partition at boot.
I guess this is gonna fix it for us
http://forum.xda-developers.com/desire-816/development/mod-enable-init-d-stock-kernel-vm-t2987126
yup, Just installed "Superuser_Busybox_Init.d_Wp_Mod_STABLE-v4.0.0.zip" from above thread and Link2SD problem is fixed. now the mount sticks
seekfind said:
I guess this is gonna fix it for us
http://forum.xda-developers.com/desire-816/development/mod-enable-init-d-stock-kernel-vm-t2987126
Click to expand...
Click to collapse
That's great! thank you )
seekfind said:
yup, Just installed "Superuser_Busybox_Init.d_Wp_Mod_STABLE-v4.0.0.zip" from above thread and Link2SD problem is fixed. now the mount sticks
Click to expand...
Click to collapse
glad that your problem is fixed now
but what did you mean by "The mount sticks" ?
mohammed fayed said:
glad that your problem is fixed now
but what did you mean by "The mount sticks" ?
Click to expand...
Click to collapse
Meaning after he restarts the device the SD doesn't need to be remounted with a command in order for link2sd to work.
Sent from my 710C using XDA Free mobile app
jaysoblitzed said:
Meaning after he restarts the device the SD doesn't need to be remounted with a command in order for link2sd to work.
Sent from my 710C using XDA Free mobile app
Click to expand...
Click to collapse
Thank you!
ive mad ext3 partition on my sd card but link2sd stil doesnt Mount it.I have htc desire 816 dual sim with lolip stock rom
but it is not working for me, init.d application says my phones kernel is not supported,
i am trying this on HTC Desire 816 5.0.2 ( Kernel 3.4.0 )
Please help
mohammed fayed said:
glad that your problem is fixed now
but what did you mean by "The mount sticks" ?
Click to expand...
Click to collapse
niloorane said:
but it is not working for me, init.d application says my phones kernel is not supported,
i am trying this on HTC Desire 816 5.0.2 ( Kernel 3.4.0 )
Please help
Click to expand...
Click to collapse
KitKat and Lollipop require different fixes.
For 5.0.2 go here...
http://forum.xda-developers.com/des...-disable-writeprotection-sense-stock-t3091456

Categories

Resources