Related
So I just got my Seidio Innocase Surface combo (50 bucks from the Seidio site). I have owned Seidio cases or holsters for just about every smartphone I have owned. I normally wait for them to show up at other outlets because they are usually cheaper, but this time I couldn't wait.
Starting with the case. For me it is a mixed bag. My last Seidio case was for my iPhone 3GS, and I loved it. I am not so sure about this case. The two halves fit the phone well, and the cut outs are seem accurate, but the connection seems a bit flimsy. I had to make several attempts to get all the "connections" to click together. This design for connecting the two halves together doesn't feel as secure as my iPhone case. This case connects front to back. The iPhone design joined a top to a bottom. The iPhone was inserted into the top and was very secure. The MT4G case just does not inspire confidence in me.
Barring the two halves separting the case feels great. It is nice and tight on the phone. Update: No, it is not tight! More info in another post below. The Innocase Surface has a rubberized finish which gives it a good no-slip grip. The case doesn't add any real bulk to the phone. It still slips into the pocket with no problems. I ordered the sapphire blue which is really dark. In medium to low light it almost looks black. I really like that.
The holster is just as awesome as any Seidio holster I have owned. It feels solid, and I love that it is felt lined, and the phone faces in. No issues there except one, and that goes back to the case. When the phone comes out of the case the clip rubs across the case where the two halves join together, and I have to pull on the phone in such a way that I wonder if I will end up pulling off the case. It hasn't happened and it might not. Again, going back to my recent iPhone case, there was no danger of the case separating when being pulled out of the holster because the force is mostly front to back (remember the phone face inward).
Bottom line: mixed feelings. Holster: awesome. Case: jury is still out. I will trial this and see how it goes. I am already eyeballing some TPU cases. I am not sure if they will work with the holster, but they are cheap.
I am not advising against buy this combo, but I would wait for these Seidio cases to show up at other locations and save a few bucks.
Hope this helps.
Ivan
Ps: I also purchased the Seidio 1600 mAh battery. I will post a review of that after I have charged it properly and used it a bit.
Well I never used it before but like you also order the combo as I am not buying BodyGlove Clear shell any more. But far as the Innocell 1600mAh goes I want you to completely discharge it and then recharge it then discharge it do this 3 times and fully charge it.
Then check and post the full mAh, V_MBat voltage for stock and then Innocell so we can see the difference. Also do a though test and tell us the usage difference between stock and Innocell in detail with total uptime. I can't say I have ever heard of Innocell but ill wait for Mugen power to release MT4G stock size battery.
HyperNode said:
But far as the Innocell 1600mAh goes I want you to completely discharge it and then recharge it then discharge it do this 3 times and fully charge it.
Click to expand...
Click to collapse
Not to hijack my own thread, but my understanding of Li-Ion batteries is that they do not need to be discharged/charged. I can't post links yet, but there is great website called "batteryuniversity" with loads of good battery info on it.
I see you have a Seidio case, what do you think of it so far?
Well I am aware of that as many is also that claiming fully discharging LiIo will damage the memory cell and shortens the life. But it always worked better for us and this is not just me it been tested by so many folks. For optical performance in my own test I found after 2-3 discharge completely and fully charging it over the course of 1week I saw the difference in same battery compared to when I got it.
I have been cycling most of my Li ion batts over the years and I have noticed a better performance out of them. I never did it 3 times.
Out of the box I kill the phone. The go to full charge. Kill it again and charge fully. After that I play normally.
Sent from my rooted iced glacier rom mt4g via XDA app
So I am recanting my statement that the case is tight on the phone. That is only a "half" truth. Actually, the back half of the case is okay, but the front half of the case is not tight...at all. When I hold it I can actually hear the front part of the case moving against the phone (as well as see it). This is the exact opposite of my Seidio slide on iPhone 3GS case which perfect. Very disappointed in this case.
Just got the Seidio case today
It seems to fit very tightly be much sturdier than the in-store case. Love the combo of a strong, hard case and a little bit of soft grip. I have no idea if it'll take a 'punch' like a gel case, but it seems resistant.
Wish there were more options between this $30 case and the .99 ones on amazon. This may be the best case available for the mt4g right now, but I don't know if it's worth $30.
Only real complaint is that it smells weird--can only hope that fades with time.
Does anyone know where i can find an extended battery cover similar to the one by seidio for my evo? I have an extended battery from amazon with the big cover and honestly i dont like it... seems like it isnt made for my evo. I just feel like the angle that it pops out of the back makes it look and feel awkward, and i especially hate the 4 bumps on the corners above the battery. Sometimes i have to push on the corners of the cover because i dont want dust geting in, and i feel like the added space other than the battery area is really unnecessary. So if it's possible, i would really love an extended battery back like the seidio one, preferably in a different cover(that would be fresh ), if anyone can help me find one!
Because the extended batteries all seem to have such different battery door covers, it's hard to say. I have been checking (and hoping) for seidio to make colored covers for the Evo for myself. The closest thing I found was on eBay. So try there for cases if you haven't already!
Good luck.
edited....i think I misunderstood your first post. If you are looking for the battery cover door though, ebay will probably still be your best bet.
Teresa
_____________________
Evo 4g / unrevoked 3.32
ClockworkMod
CM 7.0 final
Tiamat 3.3.7, non SBC kernel
Rover blue theme
_____________________
Sent from my PC36100 using XDA Premium App
brennod10 said:
Does anyone know where i can find an extended battery cover similar to the one by seidio for my evo? I have an extended battery from amazon with the big cover and honestly i dont like it... seems like it isnt made for my evo. I just feel like the angle that it pops out of the back makes it look and feel awkward, and i especially hate the 4 bumps on the corners above the battery. Sometimes i have to push on the corners of the cover because i dont want dust geting in, and i feel like the added space other than the battery area is really unnecessary. So if it's possible, i would really love an extended battery back like the seidio one, preferably in a different cover(that would be fresh ), if anyone can help me find one!
Click to expand...
Click to collapse
I have an extra seidio one i can sell you, its marked up slightly though, and one prong is missing i believe, connects fine and is not loose at all
how much you selling it for
If I was you I would take his offer if its within reason. I actually bought my seido from the factory store online and broke a prong off mine accidentally and looked everywhere for just the door alone. Now this could have very easily changed but as of before xmas? Seido themselves did not sell the door alone much less best buy or amazon etc. You can find a replacement flat standard door pretty easy, but one for the extended seido? I had tough time. I actually got them to send me one no charge, but I had just spent like 200 bucks with them so.....gl
The Sedio cover won't fit the Amazon battery.
Yes it will and make me an offer on the door its an official seidio
dkd711 said:
The Sedio cover won't fit the Amazon battery.
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
Gorilla gadgets has extened battery covers. I got my battery from them.
Finally out more options soon to come to the website, but im definitely interested but i just want the case.
Black:
http://www.tridenteer.com/products/...G-Extended%2dlife-battery-Bundle-(Black).html
Ice:
http://www.tridenteer.com/products/...-4G-Extended%2dlife-battery-Bundle-(Ice).html
anyone thinking of purchasing other than myself. im waiting to see if i can just get the case.
khalidabuu said:
anyone thinking of purchasing other than myself. im waiting to see if i can just get the case.
Click to expand...
Click to collapse
prolly not, either way its prolly gonna cost the same like the extended rugged case by seidio but this looks nice, a fat battery dont pop out like the one from seidio
Kraken lol Prefer that over this new one there coming out with it loooks so fugly great idea tho.
Anyone found a holster that works with the Kraken?
I just ordered this from amazon, it's about $13 cheaper.
That looks like an AWESOME case! I have the cyclops which looks almost exactly the same and LOVE it!
sanjsrik said:
I just ordered this from amazon, it's about $13 cheaper.
Click to expand...
Click to collapse
Me too. I wonder how the battery is going to be, probably just like a china one.
you said u found it on amazon cuz im looking and i definitely dont see one. im also waiting on a review first im curious if it will still have the problem witht the silicone slides coming off
EBAY has them now.
http://cgi.ebay.com/Trident-Electra...629414?pt=PDA_Accessories&hash=item3a65f48f26
khalidabuu said:
Finally out more options soon to come to the website, but im definitely interested but i just want the case.
Black:
http://www.tridenteer.com/products/...G-Extended%2dlife-battery-Bundle-(Black).html
Ice:
http://www.tridenteer.com/products/...-4G-Extended%2dlife-battery-Bundle-(Ice).html
Click to expand...
Click to collapse
What a shame that its coming out now, about 2 weeks until the EVO is dead (to me anyways). As someone who sells cases, I have no idea what takes these companies ::cough:: otterbox ::cough:: so long to bring these products to market. Dummy phones are available months prior to release in most cases. Extended battery cases I can understand taking longer but almost a year? No. I would of bought one of these 6 months ago. If I order now it probably won't be here until I get the Evo 3D anyways.
edit: holy crap. think they are charging enough for this? considering the only part I need is the rear section (I have the front piece and silicone from my cyclops and a battery) no way would I spend that on this.
OneStepAhead said:
What a shame that its coming out now, about 2 weeks until the EVO is dead (to me anyways). As someone who sells cases, I have no idea what takes these companies ::cough:: otterbox ::cough:: so long to bring these products to market. Dummy phones are available months prior to release in most cases. Extended battery cases I can understand taking longer but almost a year? No. I would of bought one of these 6 months ago. If I order now it probably won't be here until I get the Evo 3D anyways.
edit: holy crap. think they are charging enough for this? considering the only part I need is the rear section (I have the front piece and silicone from my cyclops and a battery) no way would I spend that on this.
Click to expand...
Click to collapse
Yea +1 on the timing point. they are actually suppose to create an option to buy just the backing for those that purchased a cyclops. But question how is the silicon on the cyclops is it always coming off like some people say ?
Hello
I just get an extended battery for my iphone from the web.
http://www.papadigitals.com/dsl-series_htc-battery-charger.html
There is some case and standard battery for HTC
I agree the timing stinks but I think this one is a better option than the powerskin. You can actually see the kickstand with this one.
ElAguila said:
I agree the timing stinks but I think this one is a better option than the powerskin. You can actually see the kickstand with this one.
Click to expand...
Click to collapse
Amen to this comment.
As an owner of the powerskin (VERY FLAWED DESIGN, read my review on this site) and this Trident case, the Trident so far is the winner.
I received the Trident (although to the wrong address than indicated) yesterday. I was luckily home to collect it. I put the cover/battery combination on the Evo and charged it up. I'm not sure how many recharge cycles it's meant to go through before it stays charged, but so far, after one night on the wall charger, it kept a charge for one subway trip from home to work (about 35 minutes) at about 90%. So, pretty much discharged 10% in 35 minutes. I think this may be due to the newness of the battery, however, I would have expected better from the size of the battery (purported) by the company.
I'll post a more thorough review after about a week of use.
sanjsrik said:
Amen to this comment.
As an owner of the powerskin (VERY FLAWED DESIGN, read my review on this site) and this Trident case, the Trident so far is the winner.
I received the Trident (although to the wrong address than indicated) yesterday. I was luckily home to collect it. I put the cover/battery combination on the Evo and charged it up. I'm not sure how many recharge cycles it's meant to go through before it stays charged, but so far, after one night on the wall charger, it kept a charge for one subway trip from home to work (about 35 minutes) at about 90%. So, pretty much discharged 10% in 35 minutes. I think this may be due to the newness of the battery, however, I would have expected better from the size of the battery (purported) by the company.
I'll post a more thorough review after about a week of use.
Click to expand...
Click to collapse
okay ill be looking forward to that review seriously how is the in hand feel and do u think the case can accomodate the seidio extended battery ?
khalidabuu said:
okay ill be looking forward to that review seriously how is the in hand feel and do u think the case can accomodate the seidio extended battery ?
Click to expand...
Click to collapse
I can't comment on the seidio thing, stopped buying their defective products years ago. I'd check the dimensions of this case against the dimensions of the seidio extended battery.
the case itself is a two-part clip on:
Back part is see through (got the icy version), clips on to the front part which has a screen protector already as part of the front.
The entire thing is wrapped in a separate rubber covering that you put on after snapping the case together. The thing itself feels very nice. I don't know about the battery life, will figure it out after a few days or week's use.
The bottom part has a flip-open cover for the battery cable and other inputs.
all the buttons are accessible because adding the plastic snap on makes everything a bit recessed, these guys thought of that as well. It is a nice touch.
All-in-all, the case is very strong. I'm not at all worried about the device dinging up.
If possible could anybody that gets one of these let us know if it will fit in any of the hip holsters? I have a holster that got with my innocase extended combo and I have another holster that came with one of the ebay cheapo specials.
sanjsrik said:
I can't comment on the seidio thing, stopped buying their defective products years ago. I'd check the dimensions of this case against the dimensions of the seidio extended battery.
the case itself is a two-part clip on:
Back part is see through (got the icy version), clips on to the front part which has a screen protector already as part of the front.
The entire thing is wrapped in a separate rubber covering that you put on after snapping the case together. The thing itself feels very nice. I don't know about the battery life, will figure it out after a few days or week's use.
The bottom part has a flip-open cover for the battery cable and other inputs.
all the buttons are accessible because adding the plastic snap on makes everything a bit recessed, these guys thought of that as well. It is a nice touch.
All-in-all, the case is very strong. I'm not at all worried about the device dinging up.
Click to expand...
Click to collapse
okay that does sound goood i shall check it up against the specs. one more question i keep hearing ppl with the cyclops saying the the rubber ring that protects the sides of the cases comes off and on when pulling out of your pocket true or false ? and how much bulk does this case actually add from the pictures it looks kind of sliming. But, i personally cant trust pictures after the deception of the powerskin.
Once again, I think this case is a thinker version of the Cyclops which I have. Great case and VERY secure but not too pocket friendly. The stickiness of the silicone bumper makes it annoying to slide in and out of tight places. But in all honestly, this case is pretty freaking sweet. The upgraded screen protector is much nicer and I believe all the cases come with an extended audio jack since it is now recessed because of the case. If I were in the market I would definitely buy the Electra!
I have this one and the original. The rubber thing has never came off, in fact it is hard to take it off. The case is wonderful and only a tad bigger than its original. The battery is good as its been up over 60 hours and awake for 12 hours with no mods.
Just got an extended battery for my Captivate, does anyone have suggestions for a phone case?
I've used one of the silicone cases all along, but now it doesn't fit.
Thanks!
Cut up the silicone case. Make it fit.
Just got back from a cell store, I may have to hack up the gel case. Its gonna be hard to find something else.
Sent from my GT-I9000 using XDA Premium App
to be honest with you i got the otterbox defender series comes with a screen protector and holster im the type of person who rarely drops there phone but that didnt stop my friend from dropping it down the 15 set of stairs man nothing was wrong no scratches but picturing it doing that without the otterbox case is like watching a non stop disney marathon for 12 hours (which is bad btw considering you hate disney)
xxfaskxx said:
to be honest with you i got the otterbox defender series comes with a screen protector and holster im the type of person who rarely drops there phone but that didnt stop my friend from dropping it down the 15 set of stairs man nothing was wrong no scratches but picturing it doing that without the otterbox case is like watching a non stop disney marathon for 12 hours (which is bad btw considering you hate disney)
Click to expand...
Click to collapse
LOL Fask!!!
Seriously tho, the phone w/extended batt fits in the otterbox without cutting up the back part of the case??? Got any pics???
I haven't found anything that is custom fit yet, I ordered a 2 piece snap together case that I'll have to do surgery on.... but at least it will have some protection.
FridayJ said:
Just got an extended battery for my Captivate, does anyone have suggestions for a phone case?
I've used one of the silicone cases all along, but now it doesn't fit.
Thanks!
Click to expand...
Click to collapse
please give me a feedback, are you happy with the extended battery, how many hours plus? what brand is it?
thanks
The otterbox is fitted to the regular case size. There is no option for the bigger battery.. sorry
Sent from my Captivate running on Cognition 4.0 from somewhere in the great state of Texas.
razvanadrian said:
please give me a feedback, are you happy with the extended battery, how many hours plus? what brand is it?
thanks
Click to expand...
Click to collapse
So far, the battery is awesome! I get approx 2 days of usage... I say approx because I haven't let it totally drain yet, I guess I still obsess some about running out of juice when at work! LOL!
Anyway, you can see the battery here:
http://www.amazon.com/Samsung-Capti..._1_1?s=wireless&ie=UTF8&qid=1310997543&sr=1-1
Modfying the case would be an option. Like this Otterbox Case Mod
minduka said:
Modfying the case would be an option. Like this Otterbox Case Mod
Click to expand...
Click to collapse
I have an extended battery on the way, and have been trying to decide on what to do about the case. I have the Otterbox Commuter and really like it. I had been debating on this same mod, but if I do it, I will probably try to not cut the silicone inner lining. I think I will be able to only cut the outer shell and the inner lining would still provide some protection. My fear is that dropping the phone on the battery with no protection at all would kill it.
I just got a silicone case and cut the back so the battery can stick out lol.
Sent from my SGH-I897 using XDA App
The otterbox can be modified plus may give you a better look ehh versus hindering its defense against Dust and dropping it I would consider the silicon case with the back cut off but personally me I got the otterbox and got cm7.and tweaked it my battery last 29 hours plus I have a year warranty case backing it up
Sent from my SGH-I897 using xda premium
There is now a case available for the captivate with extended battery. Search for "Custom TPU protective case for Samsung Captivate" on ebay. It does not fit the seido 3000mah battery since it has the stupidly oversized battery door (and is stupidly expensive anyway), but fits the common size extended battery door which is included for all the other extended batteries from 2100 -3500mah I have seen. It is a slightly harder material than the body glove case so not rubbery (a plus for me since I don't like the soft rubber on some Otterboxes).
On another note, if you don't like the oversize extended battery, there is now a stock size 1800mah battery for the captivate. Search ebay for "anker captivate battery." I use roms with good battery life (dlev 4.2 and Svii are the best I have found), plus tune my phone to remove unnecessary processes, so 1800mah is plenty to get me through a day of heavy normal use. But with a big extended battery I can make it through a day of heavy abnormal use, using GPS as much as I want, tethering through most of the day, and playing intense games or watching videos for hours.
More extended battery notes.
If you want to get your phone as close to stock size with a large extended battery, the solution also comes from ebay. Search for "mesh captivate case." It is a rubber coated plastic very light shell for the captivate. And it comes in colors if you want to jazz up your phone. Long shipping time from china, but only $3 with free shipping. It is the best case I have found for mods since it is semi-rigid so holds its shape and easy to cut with a dremel cutting wheel. It can be cut to accommodate the door of an extended battery, but an even better solution is to use it without a battery door at all. This will get you as close to stock size as possible with a large extended battery.
Cut a square in the shell to fit the battery itself without the battery door. You don't really need the battery door since once you slide the slider up, it holds the battery in without it. You have the shiny battery protruding through the case only a couple of mm and only in the 2x2" section instead of the much larger section you have to cut out if it had a door. You can paint over the battery with black paint so it is not noticeable, and when you hold it in your hand no one can even see it's a frankenphone.
An unmodified mesh case is also useful for me to not have to use the metal battery door with a stock size battery. You can put a small piece of sticky velcro (or whatever) on the battery as a spacer and put the mesh case on the phone without a battery door. With the 1800 stock size anker battery and the mesh case, it is lighter and thinner than any stock phone with a case plus has 20% or more battery life, better GPS, and better ventilation.
I don't like to use the stock captivate metal door since it degrades the GPS on my phone. When the metal door is installed, I cannot use the GPS on my phone while it is charging since it is so inaccurate. When using the mesh case or the extended battery with plastic door, the GPS works much better and works fine while charging.
The downside to using the mesh case without a battery cover is that the internals are more exposed to dirt, dust, and water. Since I don't use my phone in dirty or wet environments or drop it much, this is not a concern to me but could be for some people.
phoneturf said:
There is now a case available for the captivate with extended battery. Search for "Custom TPU protective case for Samsung Captivate" on ebay. It does not fit the seido 3000mah battery since it has the stupidly oversized battery door (and is stupidly expensive anyway), but fits the common size extended battery door which is included for all the other extended batteries from 2100 -3500mah I have seen. It is a slightly harder material than the body glove case so not rubbery (a plus for me since I don't like the soft rubber on some Otterboxes).
On another note, if you don't like the oversize extended battery, there is now a stock size 1800mah battery for the captivate. Search ebay for "anker captivate battery." I use roms with good battery life (dlev 4.2 and Svii are the best I have found), plus tune my phone to remove unnecessary processes, so 1800mah is plenty to get me through a day of heavy normal use. But with a big extended battery I can make it through a day of heavy abnormal use, using GPS as much as I want, tethering through most of the day, and playing intense games or watching videos for hours.
Click to expand...
Click to collapse
Thanks for the info mate. I just ordered the case
There is a seller on eBay (moretalktime) who sells custom TPU cases for a lot of phones including the captivate with the extended battery.
FridayJ said:
Just got an extended battery for my Captivate, does anyone have suggestions for a phone case?
I've used one of the silicone cases all along, but now it doesn't fit.
Thanks!
Click to expand...
Click to collapse
there is a seller on ebay who makes cases for the extended batteries. His id is (moretalktime)
Will this fit the samsung extend battery?
http://www.case-mate.com//Samsung-G...ate-Samsung-Galaxy-S-II-Pop-Cases-w-Stand.asp
It's such a tight fit that the phone is prone to pop out of it and if you drop it face down then it might not offer any protection. My case still stuck out over the glass a little bit but if it had been dropped it probably would have just fallen out of the case and the glass would still hit concrete - also what little was left sticking out would have made the smallest pebble hit the screen as well. I got the case you have free with the phone but couldn't keep using it because of those two things;
- That it didn't offer appropriate drop protection (which was awesome with that particular case prior.
- That it might just come out of the case too easily even if it did offer appropriate protection.
I went to a guy that had a pretty sizable mobile phone accessory stand in a shopping mall and he had a case for the normal gs2 battery that happens to fit the extendable battery. I'd go and ask people until you find someone that states having one that works and then trying it on. The first one I tried fit, but it was clear and I wanted black. He had the same one in black but when I tried it on at the shop it didn't line up properly like the clear one regardless of being the same case in a different colour; so that's my advise, is to find someone that will let you try a case at the shop, but be up front that you have the extendable battery. If they don't know what you're talking about when you tell them that, and that your phone is bigger as a result, then go elsewhere until you find something appropriate from someone who knows what they're getting into when they try it on your phone before buying.
it will fit if u dont use the back cover that is supplied with the 2000 mah battery
and it fits very thight so u dont have alot of trouble with dust comming into the battery compartment
its just a bit wierd if u show people that u dont have a back cover but iam using the case now for i think 4 months with the 2000 mah battery and having no troubles with it only thing that i dont like is that the case makes the phone fat but thats not because of the battery cos with the normal battery it feels the same
I'm using this case without any issues. Fits good.
Sent from my GT-I9100 using Tapatalk 2
jankees said:
it will fit if u dont use the back cover that is supplied with the 2000 mah battery
Click to expand...
Click to collapse
I agree with that. It protects as goods as the default cover. :good:
Could anyone find another cases for SGS2 with 2000mah battery that will fit?
And colud you post some pictures of it...
Has anyone tried using the CaseMate tough case with this battery?
monstratman said:
Has anyone tried using the CaseMate tough case with this battery?
Click to expand...
Click to collapse
there are multiple discussions going on, and this is what i know so far:
It fits very tightly in some situations.
It fits if you remove the back cover of your phone (so your battery is against the case)
Im getting the battery for my birthday soon so i hope it will fit my casemate tough case as i like it alot
some info:
http://forum.xda-developers.com/showthread.php?t=1274045&page=37