I am using GSM GN with 4.0.2 stock rom but modified the battery icon, radio is XXLA2 and bootloader is PRIMELA03 and already relocked bootloader
I know the OTA update now is only for completely stock 4.0.2 and I cannot find any custom "Stock rooted deodexed IMM76D" rom for GSM GN
Is there any method to update the rom to stock 4.0.4 without wiping my data??
hello, i have a related question but i didnt want to make another thread to avoid the spam and all the forum trolls.
my question is, i got the 4.0.4 android update (OTA) i did not update yet because i dont have stock, i have Android revolution ROM.
what will happen if i update ? will my device get unrooted ?
will my data be wiped ?
thanks a lot.
punalex said:
I am using GSM GN with 4.0.2 stock rom but modified the battery icon, radio is XXLA2 and bootloader is PRIMELA03 and already relocked bootloader
I know the OTA update now is only for completely stock 4.0.2 and I cannot find any custom "Stock rooted deodexed IMM76D" rom for GSM GN
Is there any method to update the rom to stock 4.0.4 without wiping my data??
Click to expand...
Click to collapse
best is to wipe all , like uprade to win7 from vista compared to clean installation
beirouty said:
hello, i have a related question but i didnt want to make another thread to avoid the spam and all the forum trolls.
my question is, i got the 4.0.4 android update (OTA) i did not update yet because i dont have stock, i have Android revolution ROM.
what will happen if i update ? will my device get unrooted ?
will my data be wiped ?
thanks a lot.
Click to expand...
Click to collapse
dude, as stated also in other threads, you will never be able to install OTA update due to custom recovery
seeya mates
I know the best is to wipe, but it need to backup the whole sdcard folder which is about 10GB data to my computer and then restore and need to reconfig the phone setting after wipe which really take a long long long time!!!!
So I want to find out the method of bypassing the complete 4.0.2 limitation or wait for someone to make a custom rom like "stock 4.0.4 rooted deodexed"
this kind of rom is available everytime a stock rom come out but not in this time!!?
with root explorer, or better with adb under cwm recovery if u have it, u can restore the files modified by the battery mod, and restore that files with the original 4.0.2 ones
in this way, u can apply the 4.0.4 ota when u get the notification
However, my rom is already deodexed!! Anyone have 4.0.2 rom(stock odexed but no need to wipe), radio and bootloader link (CWM zip), so I can flash this three in recovery and then the OTA update
Related
hi i just upgrading my phone from 4.0.2 to 4.0.4 imm76i (gsm/hspa+ without google wallet),
i am going to root the phone by cwm recovery, then i have some questions:
when i was on 4.0.2, i rooted the box by cwm, and when i want to do update by OTA, i have to refresh back to the original recovery in the factory 4.0.2 image to apply the package, and that's what i have done...
so here is the question: if i root it by cwm again, and then flash the new recovery.img from factory 4.0.4 image download from "https://developers.google.com/android/nexus/images#yakjuimm76i"
to the phone, will it keep the ability to OTA to next android version? in another way, is there any difference between OTA & factory image OR, is there a identification to know that whether this device flashed a factory image or ota from a previous version?
ok, then if do not mv/rm /system/recovery-from-boot.p after flash cwm(for root), will it restore the stock recovery and keep the ability to do OTA?
erics_lu said:
hi i just upgrading my phone from 4.0.2 to 4.0.4 imm76i (gsm/hspa+ without google wallet),
i am going to root the phone by cwm recovery, then i have some questions:
when i was on 4.0.2, i rooted the box by cwm, and when i want to do update by OTA, i have to refresh back to the original recovery in the factory 4.0.2 image to apply the package, and that's what i have done...
so here is the question: if i root it by cwm again, and then flash the new recovery.img from factory 4.0.4 image download from "https://developers.google.com/android/nexus/images#yakjuimm76i"
to the phone, will it keep the ability to OTA to next android version? in another way, is there any difference between OTA & factory image OR, is there a identification to know that whether this device flashed a factory image or ota from a previous version?
Click to expand...
Click to collapse
The ota is usually just the parts of the rom that have been updated, those image files are the whole rom, if u root u will be able to get the ota but it won't install even with factory recovery,I haven't done it since my N1 but if I remember right u can delete super user from system app folder and delete,--- com.noshufou.android.su and reboot and root should be gone then ota will work and after u update u just root agn .... but your way u did it is always an option ....
biggofer said:
The ota is usually just the parts of the rom that have been updated, those image files are the whole rom, if u root u will be able to get the ota but it won't install even with factory recovery,I haven't done it since my N1 but if I remember right u can delete super user from system app folder and delete,--- com.noshufou.android.su and reboot and root should be gone then ota will work and after u update u just root agn .... but your way u did it is always an option ....
Click to expand...
Click to collapse
thank u for response, i tried to update to 4.0.4 from rooted 4.0.2, and everything is ok.. according to your condition, i think there may be some difference between nexus S and galaxy nexus, so root is not the question(though i met some problem while rooting 4.0.4 caused by the version of su.zip is out of date ).
now i am on 4.0.4 and rooted by cwm, and i didn't delete /system/recovery-from-boot.p, i hope that i will not have to re-flash stock recovery when the next OTA come
When you say that is rooted through CWM, means what exactly? You only used the CWM to root the device? But how?
yep cause i wanna use stock rom on my GN so far, so i use cwm only for root(by flashing a su.zip), and after googled a lot, i think it has went back to stock recovery now, no longer worry about OTA, thank you
erics_lu said:
hi i just upgrading my phone from 4.0.2 to 4.0.4 imm76i (gsm/hspa+ without google wallet),
i am going to root the phone by cwm recovery, then i have some questions:
when i was on 4.0.2, i rooted the box by cwm, and when i want to do update by OTA, i have to refresh back to the original recovery in the factory 4.0.2 image to apply the package, and that's what i have done...
so here is the question: if i root it by cwm again, and then flash the new recovery.img from factory 4.0.4 image download from "https://developers.google.com/android/nexus/images#yakjuimm76i"
to the phone, will it keep the ability to OTA to next android version? in another way, is there any difference between OTA & factory image OR, is there a identification to know that whether this device flashed a factory image or ota from a previous version?
Click to expand...
Click to collapse
No difference. If you did not delete the two files (/system/etc/install-recovery.sh and /system/recovery-from-boot.p) then your device will automatically flash the correct stock recovery on every re-boot.
EDIT: Actually there is one difference: the OTA places those two files on your system, while a full stock ROM does not.
erics_lu said:
ok, then if do not mv/rm /system/recovery-from-boot.p after flash cwm(for root), will it restore the stock recovery and keep the ability to do OTA?
Click to expand...
Click to collapse
Yes.
biggofer said:
[snip]
if u root u will be able to get the ota but it won't install even with factory recovery
Click to expand...
Click to collapse
This is wrong. Rooting has no impact whatsoever on being able to install an OTA update.
efrant said:
No difference. If you did not delete the two files (/system/etc/install-recovery.sh and /system/recovery-from-boot.p) then your device will automatically flash the correct stock recovery on every re-boot.
Yes.
This is wrong. Rooting has no impact whatsoever on being able to install an OTA update.
Click to expand...
Click to collapse
thank you so much, explained so detailed
I currently have a Telus GSM GNex 4.0.4 flashed to the yakju builds so I can receive the OTA updates directly from Google. If I install the stock Jelly Bean 4.1 ROM, will I be able to receive subsequent OTA updates from Google?
Thanks.
pupsin said:
I currently have a Telus GSM GNex 4.0.4 flashed to the yakju builds so I can receive the OTA updates directly from Google. If I install the stock Jelly Bean 4.1 ROM, will I be able to receive subsequent OTA updates from Google?
Thanks.
Click to expand...
Click to collapse
yes
AFAIK, for flashing 4.1, u need CWM. if u have CWM, u cant get OTA.
spearhead121 said:
AFAIK, for flashing 4.1, u need CWM. if u have CWM, u cant get OTA.
Click to expand...
Click to collapse
We need to be a bit clearer than that in order to not cause confusion:
1) CWM is needed to flash JRN84D in current form, but that doesn't mean that CWM needs to be installed on your device. Booting CWM is fine.
2) All stock ROMs (including JRN84D) which have been updated from a previous build via an OTA update have two files in /system which re-flash the stock recovery on EVERY reboot. So, even if you did have CWM flashed, it would be gone unless you modified the ROM.
3) Even if you do keep CWM, you will still receive the notification that there is an OTA update, and you can install it -- it just won't install automatically. You need to manually download it, re-boot into CWM and flash it. But it will work fine.
I have unlocked, rooted, and installed Clockwork Recovery on my Galaxy Nexus (GSM, Wind Canada), and now I want to flash 4.0.4 yakju.
My current bootloader is PRIMEKK15 and my current radio baseband is UGLA4
Is flashing 4.0.4 yakju as simple as downloading the image found on google's site (yakju-imm76i-factory-8001e72f.tgz), putting it on the phone, going to Clockwork Mod, navigating to "install zip from SDcard", then choosing yakju-imm76i-factory-8001e72f.tgz, or do I have to open the tgz, then open the tar inside, and then extract this zip and install that in CWM http://i.imgur.com/wXC64.png
Since it's not a custom ROM like AOKP or CM, do I have to wipe data/factory reset in clockwork? Do I have to flash gapps?
Do I have to flash the new bootloader and radio baseband found in 4.0.4 separately?
Also, some people report reception problems with the baseband included in 4.0.4. If I want to go back to UGLA4, is that possible? I would be using the CWM "radio.img" for UGLA4 found here http://forum.xda-developers.com/showpost.php?p=23149491&postcount=139
I think that's all the questions I have, lol.
Well first off, if you're going to do it I'd just recommend you wait for the 4.1.1 image for the GSM GNex to drop. If you're really ansy, then you could flash 4.0.4 and you'll still get the OTA, but just something to think about.
Now to the question, no, you don't flash it like a ROM in CWM recovery. If you wish to completely move to yakju (or takju) to get on the Google update line (not sure why else you'd do it), you need to flash the images via fastboot. All parts of the images. It's important to have the proper bootloader and radio if you intend to receive and automatically install OTA updates. If you don't, you won't be able to install it as it checks for the radio and bootloader as part of the install process.
Follow this guide from Efrant, it's gold: http://forum.xda-developers.com/showthread.php?t=1626895
Don't use a toolkit!
Also, some people report reception problems with the baseband included in 4.0.4. If I want to go back to UGLA4, is that possible? I would be using the CWM "radio.img" for UGLA4 found here http://forum.xda-developers.com/show...&postcount=139
Click to expand...
Click to collapse
I haven't heard about any issues with the latest 4.0.4 radio outside of isolated problems. You can change the radio if you want (via fastboot, rly quick), but as I said, it'll stop you from auto-installing OTAs (which is why you went to yakju, isn't it?). You'll also get a new radio with 4.1.1.
Hmm, I might not even bother, seeing as to get the updates I'd lose CWM and root. Perhaps I will just wait for 4.1 like you said and install that.
By the way, since I am on 4.0.2 but I have CWM, does that mean even if my yakjuux build got 4.0.4 OTA, I wouldn't get notified (because of the custom recovery)??
EDIT: Say Google puts up a 4.1 image next week, I would just need to download it and follow the same steps that are outlined in that post (flashing all the different images in fastboot)?
Matt08642 said:
Hmm, I might not even bother, seeing as to get the updates I'd lose CWM and root. Perhaps I will just wait for 4.1 like you said and install that.
Click to expand...
Click to collapse
You can flash CWM and root it again after going to yakju, but you'll have to update manually (no auto-installing OTA) after that. You have to pull the image and flash it, and use an app like "OTA root keeper" to hold onto root.
By the way, since I am on 4.0.2 but I have CWM, does that mean even if my yakjuux build got 4.0.4 OTA, I wouldn't get notified (because of the custom recovery)??
Click to expand...
Click to collapse
You'll be notified, but the update won't install. It requires stock recovery to auto-install.
Cool. In that case, I will just wait for JB, then once I flash that image myself, I will reflash CWM and root my phone again.
Thanks for the help, and thanks for the link to that thread!
Matt08642 said:
Cool. In that case, I will just wait for JB, then once I flash that image myself, I will reflash CWM and root my phone again.
Thanks for the help, and thanks for the link to that thread!
Click to expand...
Click to collapse
No problem.
Sent from my Galaxy Nexus using xda premium
I am currently on ICS 4.0.4 stock AT&T, rooted, CWM installed.
Will the update to JB unroot the phone?
What about the apps I have installed and personal data?
Will it replace CWM back with stock recovery mode?
Please explain if you know how it's gonna work
ighost77 said:
I am currently on ICS 4.0.4 stock AT&T, rooted, CWM installed.
Will the update to JB unroot the phone?
What about the apps I have installed and personal data?
Will it replace CWM back with stock recovery mode?
Please explain if you know how it's gonna work
Click to expand...
Click to collapse
Well, you won't be able to install it over the air since those updates require the stock recovery to be in place. To maintain root you'd have to wait until somebody posts a rooted version of the room and flash it via Odin.
I'm assuming you can keep your personal data as is, since when I flashed via Odin from Stock to Rooted it remained.
If I root my S3 will I still be able to get the OTA updates? I rooted my Atrix and after that I couldn't get the OTA updates. Also what is the best ROM?
anaylor01 said:
If I root my S3 will I still be able to get the OTA updates? I rooted my Atrix and after that I couldn't get the OTA updates. Also what is the best ROM?
Click to expand...
Click to collapse
If you don't need a specific feature from the stock firmware (gestures, wifi calling, etc), just get CM or AOKP and save yourself a headache.
Best? As far as stock? I've read LI6 is decent.
Well with my Atrix when Android 3.0 came out I wasn't able to update it because I was rooted. So my question is when Jelly Bean comes out will I be able to update it to Jelly bean if I am rooted or have a custom rom installed?
anaylor01 said:
Well with my Atrix when Android 3.0 came out I wasn't able to update it because I was rooted. So my question is when Jelly Bean comes out will I be able to update it to Jelly bean if I am rooted or have a custom rom installed?
Click to expand...
Click to collapse
3.0 wasn't even for phones. If you install custom recovery you will not be able to receive an OTA until you flash the stock recovery. Just use a jellybean ROM.
Sent from my SGH-T999
joshnichols189 said:
If you install custom recovery you will not be able to receive an OTA until you flash the stock recovery.
Click to expand...
Click to collapse
How can this be true? This is what I did.
Restored a UVALEM nandroid (via CWM). It was the original firmware on the phone when I bought it (no custom install, but I rooted with the Sprint method a couple weeks prior), I just happened to keep this backup.
Reset factory defaults.
Nandroid again for clean UVALEM backup.
Use Software > About phone > Software update to get the UVALH2 update. It was ~90mb.
Phone rebooted after it was done.
Dropped into CWM to make another backup (CWM still here, was never removed).
Downloaded LI6 JB OTA from SamMobile. Installed that from CWM.
I have LI6, never removed CWM. And it is still there. Root should be, although I did not test to confirm.
If you can't receive OTAs with custom recovery/root, how did this work? Is it a feature that was not active in the UVALH2 build? What about the LI6 build I flashed from CWM?
Aerowinder said:
How can this be true? This is what I did.
Restored a UVALEM nandroid (via CWM). It was the original firmware on the phone when I bought it (no custom install, but I rooted with the Sprint method a couple weeks prior), I just happened to keep this backup.
Reset factory defaults.
Nandroid again for clean UVALEM backup.
Use Software > About phone > Software update to get the UVALH2 update. It was ~90mb.
Phone rebooted after it was done.
Dropped into CWM to make another backup (CWM still here, was never removed).
Downloaded LI6 JB OTA from SamMobile. Installed that from CWM.
I have LI6, never removed CWM. And it is still there. Root should be, although I did not test to confirm.
If you can't receive OTAs with custom recovery/root, how did this work? Is it a feature that was not active in the UVALH2 build? What about the LI6 build I flashed from CWM?
Click to expand...
Click to collapse
I don't know, clockworkmod is supposed to block the installation of OTA updates.
Sent from my SGH-T999
Hmm, I'm using 6.0.1.2, and it does ask me if I want to disable /system/etc/install-recovery.sh, when I try to exit.