So the users that are going to use this device in the USA on AT&T or T-Mobile, where are you purchasing your device from in the states?
Also does anyone know if I were to use it on AT&T will I have to change the cellular settings or will the device pick up default settings on first boot. I remember there were different APN settings for AT&T and an unlocked device to give it access to faster DL speeds. Does anyone know?
Thanks in advance.
I also would like to know if the international version of One X is HSPA+ 42 mbps capable with T-mobile US?
Sent from my Sensation 4G using Tapatalk 2 Beta-5
No, it's not compatible with T-Mobile US 4G unless you're lucky enough to live in one of the few places where they're using 1900MHz. It'll work with AT&T data roaming at 4G, and it'll work as 2G on T-Mob's own network.
HTC ONE X specs from phone arena:
GSM 850, 900, 1800, 1900 MHz
UMTS 850, 900, 1900, 2100 MHz
Data HSDPA+ (4G) 21.1 Mbit/s, HSUPA 5.76 Mbit/s, UMTS, EDGE, GPRS
UMTS on AT&T works at 850 and 1900 MHz so should be fine, I am not sure about t-mobile. it might work at 1700-2100 so could be kind of a problem...
regarding my personal experience, I have a european desire hd (on at&t), and in the bay area (SF) it gets no more than EDGE connection (I saw 3G icon couple of times ). However Desire HD doesn't work at 850 and 1900 MHz, whereas One X does so... should be fine on at&t.
Jam182 said:
HTC ONE X specs from phone arena:
GSM 850, 900, 1800, 1900 MHz
UMTS 850, 900, 1900, 2100 MHz
Data HSDPA+ (4G) 21.1 Mbit/s, HSUPA 5.76 Mbit/s, UMTS, EDGE, GPRS
UMTS on AT&T works at 850 and 1900 MHz so should be fine, I am not sure about t-mobile. it might work at 1700-2100 so could be kind of a problem...
Click to expand...
Click to collapse
Yep, as I said, there is no 4G on T-Mobile unless you roam to AT&T, or you're in one of a very small number of places in California where they've started using 1900MHz for T-Mob.
Related
Hi, according to what i've read the radio should be choosen to the country and the carrier you're working with, I live in colombia and my carrier is movistar, but im not getting 3g speeds, i just bought a t-mobile g2, i've seen that carriers in colombia are working on UMTS 850 and UMTS 1900, so can anyone help me on choosing the correct radio to my phone?
THANKS!!!!
The 3G bands on the G2 are 1700/2100 and 2100 MHz, so you are never going to get 3G speeds on it, if your network is using 850 and 1900 MHz. This is set in hardware, and can't be changed by flashing radios. So you are stuck on EDGE. You bought the wrong model of the Vision if you want 3G on your network. The only version with compatibility with 850 and 1900 MHz 3G bands is the Bell Canada version of the Desire Z.
I have a bell GS3 that is unlocked can I use a t mobile sim card in it and get the 3g data or is AT& T the only one that works?
The Bell site says the GS3 supports the following:
HSPA/UMTS compatibility
UMTS 850/1900/2100 MHz
GPRS/EDGE compatibility
850/900/1800/1900MHz
and according to wikipedia T mobile USA has these:
850 MHz/1900 MHz GSM/GPRS/EDGE/UMTS/HSPA
1900 MHz GSM/GPRS/EDGE 2G .
1700 MHz UMTS/HSPA/HSPA+ 3G/4G
1900 MHz UMTS/HSPA/HSPA+ 3G/4G
1700 MHz LTE
So I am fairly certain that as long as the area I am in is serviced by that 1900 MHz UMTS/HSPA I should be fine right? Obviously no LTE speeds buts thats ok I dont even use it as home since it is such a battery pig.
anyone have some input it would be greatly appreciated?
I have a att gs3 which I unlocked and now using on T-Mobile, it works good but a lot of times it switches to edge when there is 4g available. I believe there is a way to fix it by flashing t mobile radio but I dont want to brick my phone so I havent tried.
I was wondering if I purchase an unlocked HTC one, will it work with Verizon?
You have to see the frequencies of the carrier
But, probably, yes!
in a word, no.
It has no CDMA radio, which is required for voice. Not to mention VZW hasn't ever let you bring a device to their network from the outside.
gunnyman said:
in a word, no.
It has no CDMA radio, which is required for voice. Not to mention VZW hasn't ever let you bring a device to their network from the outside.
Click to expand...
Click to collapse
My friend said me that verizon use GSM radio...
I'm confused
Guich said:
You have to see the frequencies of the carrier
But, probably, yes!
Click to expand...
Click to collapse
gunnyman said:
in a word, no.
It has no CDMA radio, which is required for voice. Not to mention VZW hasn't ever let you bring a device to their network from the outside.
Click to expand...
Click to collapse
Okay, I checked and the Frequencies are the same but HTC One unlocked says nothing about CDMA. Thanks for the help
Guich said:
My friend said me that verizon use GSM radio...
I'm confused
Click to expand...
Click to collapse
VZW uses two different technologies.
the voice is carried on CDMA as is their 3G EVDO data.
LTE is used, but not the same bands as AT&T or T-Mobile.
The only major carriers in the US on GSM are T-Mobile and AT&T (and their mvno's)
Hi, it looks like I'm reviving this thread...
I've done a bit of homework and on htc.com the One specs are as follows:
2G/2.5G - GSM/GPRS/EDGE:
850/900/1800/1900 MHz
3G - UMTS/ HSPA:
Europe/ Middle East/ Africa: 900/1900/2100 MHz with HSPA+ up to 42 Mbps
Asia: 850/900/1900/2100 MHz with HSPA+ up to 42 Mbps
Canada/ Latin America: 850/1900/2100 MHz up to HSPA+ 42 Mbps
T-Mobile (US): 850/ AWS/1900/2100 MHz with HSPA+ up to 42 Mbps
AT&T: 850/1900/2100 MHz with HSPA+ up to 21 Mbps
Sprint: 1900/2100 MHz with HSPA+ up to 14.4 Mbps
3G - CDMA:
800/1900 MHz for Sprint
4G - LTE:
Europe/ Middle East/ Africa: 800/1800/2600 MHz
Asia: 1800/2600 MHz
T-Mobile (US)/ AT&T/ Canada/ Latin America: 700 MHz and AWS band
Sprint: 1900 MHz
On the Samsung Galaxy S4 for Verizon:
LTE, CDMA/1xEVDO Rev. A (800/1900 MHz)
Global Network: EDGE/GSM (850/900/1800/1900), HSPA/UMTS(850/900/1900/2100)
It looks to me like the phone supports all ranges and has both styles/types of radios. Has anyone been able to get an unlocked One working with Verizon? Does anyone know how to do it? If I buy an unlocked One, would it come packed with all the network support as listed above or do they manufacture them with only a specific radio/frequency range in mind?
d-pabs said:
Hi, it looks like I'm reviving this thread...
I've done a bit of homework and on htc.com the One specs are as follows:
2G/2.5G - GSM/GPRS/EDGE:
850/900/1800/1900 MHz
3G - UMTS/ HSPA:
Europe/ Middle East/ Africa: 900/1900/2100 MHz with HSPA+ up to 42 Mbps
Asia: 850/900/1900/2100 MHz with HSPA+ up to 42 Mbps
Canada/ Latin America: 850/1900/2100 MHz up to HSPA+ 42 Mbps
T-Mobile (US): 850/ AWS/1900/2100 MHz with HSPA+ up to 42 Mbps
AT&T: 850/1900/2100 MHz with HSPA+ up to 21 Mbps
Sprint: 1900/2100 MHz with HSPA+ up to 14.4 Mbps
3G - CDMA:
800/1900 MHz for Sprint
4G - LTE:
Europe/ Middle East/ Africa: 800/1800/2600 MHz
Asia: 1800/2600 MHz
T-Mobile (US)/ AT&T/ Canada/ Latin America: 700 MHz and AWS band
Sprint: 1900 MHz
On the Samsung Galaxy S4 for Verizon:
LTE, CDMA/1xEVDO Rev. A (800/1900 MHz)
Global Network: EDGE/GSM (850/900/1800/1900), HSPA/UMTS(850/900/1900/2100)
It looks to me like the phone supports all ranges and has both styles/types of radios. Has anyone been able to get an unlocked One working with Verizon? Does anyone know how to do it? If I buy an unlocked One, would it come packed with all the network support as listed above or do they manufacture them with only a specific radio/frequency range in mind?
Click to expand...
Click to collapse
Nope
No
Stop nope, just no.
Verizon and Sprint use CDMA as their base on their Network. The only HTC One with CDMA is the Sprint version. But you can't use the Sprint version on Verizon.
That's why when the Sprint version was released developers had to tweak their roms and recoveries since the outside was the same but the insides no.
Yes LTE is gsm based and requires a GSM radio. And yes when the Verizon HTC one is released it can be used on TMo and AT&T. Since it has both CDMA & GSM radios.
But NO NO NO you CAN NOT use a AT&T, T-Mobile, Dev Edition,Sprint, or Iternational HTC One on Verizon.
Sent from my HTC One using xda premium
which is required for voice.
Until Voice over LTE is fully implemented voice is still falling back into CDMA.
Sent from my HTC One using xda premium
Thanks for your help! I realized I was misunderstanding the way those specs were written, thinking a single phone carried all those ranges and could work equally across the board.
I'm leaning towards getting an unlocked phone for T-Mobile. Any suggestions on where to get it from? If I get it from T-Mobile then it will likely have bloat on it which I don't care for. I could get it from Google Play or HTC's shopamerica...Is there an "easy" way to determine whether or not a phone will fully function on a particular network? Clearly my line of thinking on just making sure the frequency ranges match up is rather off!
Depends what freq your carrier uses for 3G etc. Only the international and dev edition are bloat free. But your at xda there are threads all over the place to help you debloat.
Again T-Mobile is the only one with 1700 3G band.
The dev doesn't have 1700, but has other extra bands. And the international lacks LTE.
Only Verizon will sell their version of the ONE. All the others are all over the internet.
Sent from my HTC One using xda premium
Tachi91 said:
Again T-Mobile is the only one with 1700 3G band.
The dev doesn't have 1700, but has other extra bands. And the international lacks LTE.
Only Verizon will sell their version of the ONE. All the others are all over the internet.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
So if I travel internationally and want to have the use of LTE, it sounds like I would need to get the unlocked "international" One? If the so-called "developer" version of the One doesn't have the 1700 band, will one of the other bands take over/compensate? In other words, will the developer phone still be fully functional? I also assume that by "developer" phone you're referring to both the unlocked 32 and 64Gb phones sold at shopamerica.com?
Lastly, here's what I'm doing: I want to buy a phone that I can use in the US and if I travel to Canada, I want to make sure it is compatible with their networks too so all I would need to do is pick up a new sim card and be off to the races. If I'm understanding everything, then the phone on shopamerica should be sufficient.
Any thoughts? Thanks again for the help! I've never dealt with network matching and unlocked phones. Can you tell?!
Stick with the developer edition since it offers more 3G bands ... LTE outside the US it would depend if whatever carrier you use on that country uses any any of the LTE bands it supports.
A lot of the major carriers around the world use similar 3G bands most will work on this phone. Again it all depends on which carried you use.
Sent from my HTC One using xda premium
On band 2 or 4 hspa?
PunishedSnake said:
On band 2 or 4 hspa?
Click to expand...
Click to collapse
Here is 1 way https://play.google.com/store/apps/details?id=net.simplyadvanced.ltediscovery
There are ways by dialing some codes but don't know them.
G4 here but that doesn't show band 2 or 4hspa
PunishedSnake said:
G4 here but that doesn't show band 2 or 4hspa
Click to expand...
Click to collapse
I'm on T-mobile. Here it clearly shows Band 4 whenever I have LTE connection.
Edit: Also on HSPA
GUGUITOMTG4 said:
I'm on T-mobile. Here it clearly shows Band 4 whenever I have LTE connection.
Click to expand...
Click to collapse
I'm asking about hspa
PunishedSnake said:
I'm asking about hspa
Click to expand...
Click to collapse
If you use T-mobile Hspa/hspa+ (4G) and LTE run on band 4 now days.
So, whenever you are on either HSPA or LTE, you be using band 4 as of now.
Here's the T-Mobile bands:
LTE Frequencies:
1700 MHz & 2100 MHz AWS band 4
1900 MHz MetroPCS band 2 (in refarmed areas)
Lower 700 MHz band 12 (in development) / in service in selected areas
3G/4G Frequencies (WCDMA):
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
2G Frequencies (GSM/GPRS/EDGE):
1900 MHz PCS band 2
Should have been clearer
I know all that but I don't know if my phone is on 1900 or aws hspa
PunishedSnake said:
Should have been clearer
I know all that but I don't know if my phone is on 1900 or aws hspa
Click to expand...
Click to collapse
You should be able to tell by looking the the signal bars. if you have 3g/4g or LTE, you're on 1700/2100 (b4) I gave all info. T-mobile no longer uses their old 1900Mhz. (MetroPCS) does or did.. Maybe if you set your phone to "GSM Only" on the network setting it may use their old 1900.
Approximately 90% of our network traffic is on our 3G and 4G bands (1700 MHz and 2100 MHz), which is leaving our 2G bands (850 MHz and 1900 MHz) underused. To help make best use of our 2G bands, we will be re-farming the excess 1900 MHz spectrum from EDGE technology to HSPA+. This will not eliminate 2G 1900 coverage in an area, but will free up some of that spectrum for 4G services. This reallocation will result in increased 4G capacity, smoother connections, and fewer dropped calls.
Click to expand...
Click to collapse
Man, you didn't even get ONE thanks for any of those replies? That will change now even though I have a Verizon LG-G4 and this thread doesn't matter to me
Lol why thank when not answering the question
Question was
How do I find out which hspa band my phone is one?
And yes T-Mobile uses hspa 1900 now. Actually runs both 1700 and 1900 similtaneously in most of CA
Before with the gs6 I'd merely set 1900hspa to see if its here lol
I currently have a Verizon HTC 10 but am wanting to make the switch to T-Mobile. Anyone know if I would be able to use my phone on T-Mobile's network? I tried Google but mostly everything was about using an Unlocked HTC 10 on Verizon.
If the Verizon HTC 10 is unlocked, then in "most" places it will work including cellular data. Continue reading...
Below is the network info for HTC 10 from Verizon and specs do show that 3g/4g(UMTS) should work find as long as you are in 1900 band area. It is because the phone is missing 1700 that T-Mobile is using. As for LTE signal, you are covered I have made bands in "bold" and they represent T-Mobile compatible bands that Verizon model has.
CDMA: 800, 1900 MHz, GSM: 850, 900, 1800, 1900 MHz , UMTS: 850, 900, 1900, 2100 MHz, LTE: Band 2, 3, 4, 5, 7, 13, 20, 28
https://www.verizonwireless.com/smartphones/htc-10/