Related
Well I just flashed my first ROM and thought I followed everything to the letter. I ran HardSPL, it completed, and I verified that it was done in the bootloader screen. Then I downloaded Energy 23544 with MaxManila Mar 09. Sync'ed with WMDC, Ran Custom RUU, It says it flashed ok. Now it just sits at the "Toch Pro2" startup screen. Can anyone tell me what I missed and if there is anyway to fix it?
Thanks
Steve
stisinai said:
Well I just flashed my first ROM and thought I followed everything to the letter. I ran HardSPL, it completed, and I verified that it was done in the bootloader screen. Then I downloaded Energy 23544 with MaxManila Mar 09. Sync'ed with WMDC, Ran Custom RUU, It says it flashed ok. Now it just sits at the "Toch Pro2" startup screen. Can anyone tell me what I missed and if there is anyway to fix it?
Thanks
Steve
Click to expand...
Click to collapse
Need more info like who is your carrier...the problem you are describing sounds like you flashed a gsm rom (t-mobile and at&t) to a cdma phone (sprint and verizon). If that is the case you need to flash back to stock rom then grab the energy rom from here for the CDMA phone
http://forum.ppcgeeks.com/showthread.php?t=86489
hopefully you did not brick your phone...good luck
Seems like you've done everything right. Just note that first time flashes usually take a while to load on the first boot before customization procedures.
If the phone doesn't budge, try a hard reset. To Hard reset your phone, Turn it completely off (remove and reinsert battery if needed), then hold down the Send and End and the power button. It should load the SPL and then ask you if you want to Hard Reset, press the Volume Up key to accept.
If the Hard Reset doesn't work, download a stock ROM, and flash that via the bootloader. If the stock ROM works, try to flash the Energy ROM again.
To enter the bootloader, Hold down the Volume Down key while turning on your phone. or hold it down and while pressing the reset button.
Hopefully you can get this sorted.
eichenberg said:
Need more info like who is your carrier...the problem you are describing sounds like you flashed a gsm rom (t-mobile and at&t) to a cdma phone (sprint and verizon). If that is the case you need to flash back to stock rom then grab the energy rom from here for the CDMA phone
http://forum.ppcgeeks.com/showthread.php?t=86489
hopefully you did not brick your phone...good luck
Click to expand...
Click to collapse
That could be the case, but he sucessfully flashed a HardSPL, so he could just enter the bootloader and flash his stock ROM to continue operation of the phone.
When he responds about who his carrier is and which TP2 he has, we'll go from there.
I am on US Cellular and I did use the GSM ROM for some stupid reason. I can load the bootloader screen and am downloading the correct ROM now. I assume I then follow the load from microSD card procedures?
Thanks guys
You are lifesavers if I can get past this
stisinai said:
I am on US Cellular and I did use the GSM ROM for some stupid reason. I can load the bootloader screen and am downloading the correct ROM now. I assume I then follow the load from microSD card procedures?
Thanks guys
You are lifesavers if I can get past this
Click to expand...
Click to collapse
Yes, with HardSPL you can flash the nbh file from the microSD card, but I recommend you flash using your PC via USB. It would save you the hassle of trying to find and extract the NBH.
Well it wouldn't update via the PC because it wouldn't connect. I did find and rename the nbh file and put it on another sd card. It is updating now with the stock ROM. Then its back to the drawing board if this works.
Thank - I'll update and give other noob idiots my story when all is good. (still having fingers crossed)
stisinai said:
Well it wouldn't update via the PC because it wouldn't connect. I did find and rename the nbh file and put it on another sd card. It is updating now with the stock ROM. Then its back to the drawing board if this works.
Thank - I'll update and give other noob idiots my story when all is good. (still having fingers crossed)
Click to expand...
Click to collapse
Hmm... HardSPL usually enters USB mode when the bootloader is run and a USB cord is connected, but I'm glad you got your phone flashing either way. Good luck.
My problem was definitely the wrong ROM version.
For anyone else as dumb as me, this is what my problem was...
Everything seemed to flash ok originally (the program said it was successful). Then it restarted and the phone would not go past the "Touch Pro2) screen. There was nothing else on the screen.
and here is what I did to fix it...
Got another SD card and formated to fat32.
Extracted the proper original ROM.exe file using winrar.
Placed the .ngh file in the root of the card with the name rhodimg.nbh
Insert the sd card in the phone and restart into the bootloader screen
When it asked if I wanted to load the ROM, I of course did what it said
When it finished I removed the sd card and pressed the reset button
It took a while but everything loaded ok.
Then I started over with the ROM I wanted (this time using the correct CDMA version). Again everything seemed to go ok. This time when it rebooted, on the "touch pro2" boot screen there was additional text at the bottom indicating the cooked ROM I installed.
Thank you to everyone who helped me understand what I did wrong and I hope noone else is as dumb as me, but if you are there is hope.
Thanks
Steve
stisinai said:
My problem was definitely the wrong ROM version.
For anyone else as dumb as me, this is what my problem was...
Everything seemed to flash ok originally (the program said it was successful). Then it restarted and the phone would not go past the "Touch Pro2) screen. There was nothing else on the screen.
and here is what I did to fix it...
Got another SD card and formated to fat32.
Extracted the proper original ROM.exe file using winrar.
Placed the .ngh file in the root of the card with the name rhodimg.nbh
Insert the sd card in the phone and restart into the bootloader screen
When it asked if I wanted to load the ROM, I of course did what it said
When it finished I removed the sd card and pressed the reset button
It took a while but everything loaded ok.
Then I started over with the ROM I wanted (this time using the correct CDMA version). Again everything seemed to go ok. This time when it rebooted, on the "touch pro2" boot screen there was additional text at the bottom indicating the cooked ROM I installed.
Thank you to everyone who helped me understand what I did wrong and I hope noone else is as dumb as me, but if you are there is hope.
Thanks
Steve
Click to expand...
Click to collapse
No biggie, you're very welcome. We all are noobs at some point of our existance and we all make mistakes. I'm just glad you were able to learn from yours and recover, in addition to pointing out to others what went wrong. Have fun with your new ROM.
~Joseph
stisinai said:
My problem was definitely the wrong ROM version.
For anyone else as dumb as me, this is what my problem was...
Everything seemed to flash ok originally (the program said it was successful). Then it restarted and the phone would not go past the "Touch Pro2) screen. There was nothing else on the screen.
and here is what I did to fix it...
Got another SD card and formated to fat32.
Extracted the proper original ROM.exe file using winrar.
Placed the .ngh file in the root of the card with the name rhodimg.nbh
Insert the sd card in the phone and restart into the bootloader screen
When it asked if I wanted to load the ROM, I of course did what it said
When it finished I removed the sd card and pressed the reset button
It took a while but everything loaded ok.
Then I started over with the ROM I wanted (this time using the correct CDMA version). Again everything seemed to go ok. This time when it rebooted, on the "touch pro2" boot screen there was additional text at the bottom indicating the cooked ROM I installed.
Thank you to everyone who helped me understand what I did wrong and I hope noone else is as dumb as me, but if you are there is hope.
Thanks
Steve
Click to expand...
Click to collapse
Glad you got your TP2 back, it's not a nice paperweight
Badwolve1 said:
it's not a nice paperweight
Click to expand...
Click to collapse
Actually as paperweight's go, it's a damn sexy one
But I would prefer a working phone any day
I do have to say that I am drooling at the possibilities of this phone. Just have to take things a little slower.
I did the same thing basically. I tried a gsm rom on my us cellular phone. didnt know that they conflict at that point.
what rom do i need to flash to get my phone back?
Here is a good place to start...
http://forum.ppcgeeks.com/forumdisplay.php?f=98
I am very happy with the Energy Rom's, but that is a whole different discussion.
Or you can go back to the stock ROM which you can get at ppcgeeks also.
joseph881 said:
Seems like you've done everything right. Just note that first time flashes usually take a while to load on the first boot before customization procedures.
If the phone doesn't budge, try a hard reset. To Hard reset your phone, Turn it completely off (remove and reinsert battery if needed), then hold down the Send and End and the power button. It should load the SPL and then ask you if you want to Hard Reset, press the Volume Up key to accept.
If the Hard Reset doesn't work, download a stock ROM, and flash that via the bootloader. If the stock ROM works, try to flash the Energy ROM again.
To enter the bootloader, Hold down the Volume Down key while turning on your phone. or hold it down and while pressing the reset button.
Hopefully you can get this sorted.
Click to expand...
Click to collapse
O Bless you Joesph881.I had same problem.Flashed stock Rom in bootloader.My life is back to normal.Again,thanks.
stisinai said:
Well I just flashed my first ROM and thought I followed everything to the letter. I ran HardSPL, it completed, and I verified that it was done in the bootloader screen. Then I downloaded Energy 23544 with MaxManila Mar 09. Sync'ed with WMDC, Ran Custom RUU, It says it flashed ok. Now it just sits at the "Toch Pro2" startup screen. Can anyone tell me what I missed and if there is anyway to fix it?
Thanks
Steve
Click to expand...
Click to collapse
hit the red reset button on the right. mine did that also, and that is what I did, and it came back up without a problem.
STOCK ROM
FYI, the stock ROM, original ship ROM can be found here at the htc mobile phone product support page. It comes as an *.exe and you double click once in the bootloader screen and it works
I had a problem where I flashed with a new rom, and it went to the white screen. I had to flash with the original ROM and it came back to life! yay.
I've bricked my desire, after I installed uvoc 2.6.32 for Sense Roms everything was ok. THEN I want to instal some mod that changes the battery indicator to some circle with % show inside. My desire started to loop after "quietly brilliant" In attack
of panic I've formatted system and boot. now I can onl get in recovery mode. My m8 is going to give it to my operator's for warranty sayin something like "I don't know what happened i get it off the charger and it was like this"
Or maybe any chance to repair at home ?
Sorry for my bad english.
Do you have a custom recovery installed? If so just install another rom!
If not just run an RUU and return it to stock and start again.
I don't think you need to return it to HTC until you have tried a few things.
I am pretty sure this could be fixed yourself!!
Sent from my Amiga 500 using Workbench
Hmm okay I will try something in the evening, when I get back from work.
Now more questions
1. is it possible to get to sd card from windows when in recovery or I have to buy a card reader.
2. RUU ?? sorry I'm android noob
dziku1 said:
Hmm okay I will try something in the evening, when I get back from work.
Now more questions
1. is it possible to get to sd card from windows when in recovery or I have to buy a card reader.
2. RUU ?? sorry I'm android noob
Click to expand...
Click to collapse
1. Do you have a custom recovery installed (Amon-Ra or Clockworkmod)? If so, it is possible to access the SD card over USB from Windows. The option will be "Mount USB Storage" or something similar. If you have a custom recovery I think you *should* just be able to flash a rom from there!
2. An RUU is a software update from HTC (found here: http://forum.xda-developers.com/showthread.php?t=695667). Where did you get your Desire? Was it unbranded or did you get it from a network (O2, Vodafone etc)? Also what HBOOT do you have? To find this, power off your device, press (and hold) BACK and press power. It should say HBOOT at the top and have a number beside.
Also, I don't suppose you have an old Nandroid backup or anything?
Stu
same thing happenend to me once, first off all, dont panic
what the guy above me says, do that, plug it in via usb and you'll be able to mount it, then just throw a new rom on there: MIUI, LEEDROID, OPENDESIRE.
whatever you want.
install that zip via the recovery menu and lead a long and happy life
StuMcBill said:
1. Do you have a custom recovery installed (Amon-Ra or Clockworkmod)? If so, it is possible to access the SD card over USB from Windows. The option will be "Mount USB Storage" or something similar. If you have a custom recovery I think you *should* just be able to flash a rom from there!
2. An RUU is a software update from HTC . Where did you get your Desire? Was it unbranded or did you get it from a network (O2, Vodafone etc)? Also what HBOOT do you have? To find this, power off your device, press (and hold) BACK and press power. It should say HBOOT at the top and have a number beside.
Also, I don't suppose you have an old Nandroid backup or anything?
Stu
Click to expand...
Click to collapse
The phone was bought from a network "play" (poland) it was sim free from stock and no sighn of any branding on it.
I will be able to check the hboot version today evening.
I have an "Mount USB Storage" option in recovery. clockworld.zip is on sd too.
I will try to get to sd and install a stock rom (i tried to reinstal the kernal ive dowloaded from xda) but nothhing happens.
It doesnt even try to boot when I press the power key (without the volume down arrow) it acts like I would use the power + v. down)
before I use format boot and format system it was looped as I said before.
First, download this RUU file:
http://shipped-roms.com/download.ph...00.32U_5.09.05.30_2_release_142828_signed.exe
Then, turn your phone on whilst holding the back button and you should get into FASTBOOT. Connect your phone to your PC and then run that RUU. If it works it will reset the phone back to stock
dziku1 said:
The phone was bought from a network "play" (poland) it was sim free from stock and no sighn of any branding on it.
I will be able to check the hboot version today evening.
I have an "Mount USB Storage" option in recovery. clockworld.zip is on sd too.
I will try to get to sd and install a stock rom (i tried to reinstal the kernal ive dowloaded from xda) but nothhing happens.
It doesnt even try to boot when I press the power key (without the volume down arrow) it acts like I would use the power + v. down)
before I use format boot and format system it was looped as I said before.
Click to expand...
Click to collapse
If you can get into Clockwork mod then you can put any ROM you like (Defrost, Cyanogen, MIUI etc) on the SD card and flash that and you should have a fully working device.
Or you can do what Eddy posted above and get back to complete stock (like it was when you bought it)!
stu
I will try that, currently if i choose "fastboot" when turn it on, it just blinks and get me to the same place I was a second before.
Stay tuned for more question in about 4,5h form now :]
It will look the same BUT it'll say FASTBOOT instead of HBOOT at the top...
It boot up ! Thank you all for your help and patience. It was a good lesson for me.
Now I will try to be more mature and careful user.
Thank you again.
dziku1 said:
It boot up ! Thank you all for your help and patience. It was a good lesson for me.
Now I will try to be more mature and careful user.
Thank you again.
Click to expand...
Click to collapse
No probs. Glad you managed to get it fixed without sending it back to HTC!
Well I have had my question answered by a friend but the answer was not the best of news.
Evidently my rom is corrupted which makes me feel like a jack a** for not rooting sooner since from my reading of the forums you can 'flash or re-flash' the different rom builds and recover your phone. So my conundrum exist in the fact that i never did root since i love sense so much and i was told that s-off negated it period, my phone being bricked or soft bricked since i can get into the boot loader is there a way to root and flash a custom rom so that i can get the phone to work.
And also im running the official upgrade for froyo
espresso pvt ship s-on\hboot- 1.02.0000
microp-0620
touch panel-synt0102
radio-7.15.35.16
nOV 26 2010,20:43:01
any help would be appreciated since i have some thing that i want to get off the phone that i deem relevant in my life as well as the desire not to buy a new phone quite yet since im not eligible for an upgrade
What exactly is wrong with your phone? How did your friend know it was "corrupted?"
Have you tried this, as copied from another non-rooted person:
1. pull battery
2. replace battery and turn on power WHILE HOLDING volume down. This will access "Hboot"
3. use the volume down button to hover over option 3 Clear storage
4. select using the power button
5. hit yes using volume up
I don't know anything about the official update, but can't you update your phone again with that same procedure?
Oh, read up on your problem. You dropped it in water. Is that obvious? Can you check and see if they'll send you a replacement. That doesn't actually sound like your rom is corrupted, it sounds like your hardware is fried.
..........
jacewt said:
What exactly is wrong with your phone? How did your friend know it was "corrupted?"
Have you tried this, as copied from another non-rooted person:
1. pull battery
2. replace battery and turn on power WHILE HOLDING volume down. This will access "Hboot"
3. use the volume down button to hover over option 3 Clear storage
4. select using the power button
5. hit yes using volume up
I don't know anything about the official update, but can't you update your phone again with that same procedure?
Oh, read up on your problem. You dropped it in water. Is that obvious? Can you check and see if they'll send you a replacement. That doesn't actually sound like your rom is corrupted, it sounds like your hardware is fried.
Click to expand...
Click to collapse
So this is my dilemma i have a slide that was dropped in water, it started to work for a moment then it stopped it's stuck on the splash screen and wont go beyond that. It will go into bootloader but wont boot in recovery mode. It does read the usb in recovery mode although i cant access the files (it just shows the hr glass and i mean for hrs.. I would try to root from this point point but i got the official froyo update so i cant go s-off and i dont have a gold card or the facilities to make one. Help please i dunno what to do from this point!!!........
that was my original question. I didn't get a reply so i got a hold of my friend who lives in alaska, who also works for an it company he says that it sounds like the rom is corrupted since u can access some of the primary functions ie. bootloader, it does read from the sd card, it does go into fastboot (sort of).
I bought the phone off of craigslist so no insurance there either, so rocjk in a hard place yes. Ive tried clear storage as well no luck there, as for re-updating i would have to be able to access the sd from the usb, and although it does read it every time i've tried to access it won't let me from the desktop.
So i come again to those with more knowledge than my self in hopes of garnering the requisite knowledge. How would/could you tell if the hardware's fried or not?
I don't know about your phone but on my Evo 4G I can load a fresh copy of the official 2.2 rom without going into recovery.
I just downloaded the RUU for my phone and renamed it to PC36IMG.zip and it automatically loads on the hboot menu from my SD card. It had to be on the root of your SD card to be seen.
I get the feeling that you may have a different issue if you dropped it in water.
Sent from my PC36100 using XDA Premium App
would i need to create a gold card for that to work? or could i just use a sd card reader download and hboot it from that point?
I've never heard of a gold card but just did a search and found info on it. Yay more stuff to research!
I'm not sure if you need one. Someone else will have to answer that. I didn't need one. But then I used unrevoked to get root, now I'm not even running that stock rom.
Sent from my PC36100 using XDA Premium App
Alright. For starters, xda has been VERY VERY helpful to me over the past few months and I thank everyone who has ever contributed to a question or a discussion I have read. That being said, this is my first post. I watched the newb video, read many forums (both xda and others), google searched, read some more threads, kept reading threads, tried some methods described in some threads, bookmarked some interesting threads for if my phone ever works again, and read some more threads.
I am not saying the answer is not already out there, I am saying I have reached my resourcefulness cap.
Anyway, to the root of the problem: I'm not entirely new to rooting, and am comfortable using recovery and hboot to flash roms. I also had a nandroid backup! for SOME SILLY reason, while in my clockworkmod recovery this morning (maybe slightly due to being half asleep which is why I now recommend being fully awake before entering hboot or recovery or rom manager....etc) I formatted the system on my phone. I THINK.
My phone will now load up to display the bootloader, and go into recovery mode, and flash roms, but when I flash a rom, nothing changes. If I boot my phone up, it will show a notification bar at the top like usual, a stock wallpaper, and that is IT! it will show a message notification and missed call icon since I have them, but the touch screen will not work. The rosie buttons at the bottom do not show up (i.e. phone button or all aps button) no apps appear, no clocks except for in the notification bar... hardkeys have no effect (home button search button menu or back) and volume keys will not work. The lock button will only lock and unlock the screen, not power off or reboot or anything. If plugged in at this point, it is charger only.
So, I can take the micro sd card out and put files on it from my PC via a microsd-usb converter thing...
I have tried putting new roms on the sd and flashing them from recovery, no effect. Tried the RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe program, it always says that my phone has below 30% battery and will not continue (this is not the case as I have two batteries both have been fully charged because the phone will still charge them...)
And I have tried putting PC36IMG.zip files on my sd card to no avail.
I am thinking that the system was wiped because it seems like there is no boot image on the phones internal memory itself. I am currently looking for a way to place a boot image on the sd card to possibly flash it or some sort of update.zip so that my bootloader will ask me to update upon reading it.
Sorry for the long post, and ask any questions I will answer as best I can.
I am posting preemptively to the boot image adventure so that if it does not work, maybe I can have some help finding a solution by then.
I was going to take my evo to the sprint store since it is under warranty but if they go into recovery they will see clockworkmod recovery.
Thanks to all for any form of guidance!
I did just notice in my Bootloader menu (HBOOT-2.10.0001) that it says Supersonice evt2-3 **** S-ON
I don't know how because I thought it was a requirement that it says S-OFF to be rooted and flash roms, but I have definitely flashed roms before and gained su access to applications and such. BUT since it says S-ON would it then be covered by the warranty if it is not rooted?
Thanks again.
I you want to flash a boot image, you can take the boot.img from an RUU for the firmware you are, place it in your adb tools folder, then flash it using the commands:
fastboot flash boot boot.img
fastboot reboot
I'm not sure how to identify what firmware I am. Unless your talking about the Hboot version? and also, I can't place anything in any folder except onto my sd card. I have no access other than that to the phone. On the sd card there are no files except for what I put on there.
...aaand not to mention I don't know what adb is exactly...
Does your phone still go to clockwork when you go to recovery?
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Timeconsumer10 said:
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Click to expand...
Click to collapse
Welcome, but yes, you do need to have had usb debugging enabled, so we'll see how that goes.
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Timeconsumer10 said:
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Click to expand...
Click to collapse
Lol, it'd take you 200,000 days since you can only thank 5 times a day Though glad you're rooted now.
shortydoggg said:
Does your phone still go to clockwork when you go to recovery?
Click to expand...
Click to collapse
Yes it still goes to clockwork because its rooted.. now my screen legitimately does not work in certain areas of the screen (not responding to touch) so I'm going to try and get it stock stock stock unrooted and go for warranty replacement. Any ideas please let me know. Currently trying RUU Supersonic...
So, I got an ERROR [110] message from the RUU package its a file open error... :/ now i dont know what is up. Says I need a complete RUU package. Looking for another one or another option now.
If i boot phone normally now it just goes to a black screen with "htc" in the middle and "!" in a triangle in all four corners. Can't do anything from that screen.
If I boot into bootloader once where it says SHIP S-OFF at the top and instead of recovery and all those options it just says RUU but you cant do anything there... :/ I now, however cannot even get to the bootloader screen.
Could they tell it is rooted?
Maybe I could say I finally decided to do sprints OTA update that I've been denying for a while and this is the result.
Anyone agree disagree?
COCLUSION!
So. Since it has just the HTC logo and four error icons one in each corner... I took it into a sprint repair store. It would not boot into bootloader as a hard reset, so the guys at the store were stumped. They had actually never seen this before =). They asked me if I rooted it and all so I just played dumb. I told em I didn't know what that really was. They kinna explained it and I told em I didn't even have a computer (not a lie actually I sold mine and now use my dads or gfs lol). The logo on the screen was an oooold htc logo from like hero or so. So they just put it in the system as a wont even turn on type of thing and gave me a new phone since I was under warranty =) gonna see if I can live without root juuust for a little bit because work and school are gonna keep me busy for a while. I am certain to return though!
Can't wait to see what the devs can do by then!
Thanks to all for the help!
Earlier today, I ran the updated 15/10/11 version of the ace hack kit. Like it was suggested, I read through the manual then I re-read it and re-read it again. As suggested, I disabled / uninstalled all security software on my pc and the other superfluous services. Ran the executable drivers file then I set the phone to charge only and usb debugging was ticked.
I then ran the hack-ace.cmd file as administrator and let the program do it's thing.
It appeared to have completed without any glitches in the suggested 6 minutes.
However, on the phone, all was not well. Since running this, the screen remains blank. When I power on, I get the HTC logo and then it disappears / disintegrates into a blank screen and nothing happens.
The only reason I ran this was to get rid of the irritating apps that I never use but have to Kill every day.
Can anyone help to overcome this problem? This was a replacement handset that I had to fight with my insurance company to get only for this to happen.
I am literaly at my wits end.
Thanks
anomander0108 said:
Earlier today, I ran the updated 15/10/11 version of the ace hack kit. Like it was suggested, I read through the manual then I re-read it and re-read it again. As suggested, I disabled / uninstalled all security software on my pc and the other superfluous services. Ran the executable drivers file then I set the phone to charge only and usb debugging was ticked.
I then ran the hack-ace.cmd file as administrator and let the program do it's thing.
It appeared to have completed without any glitches in the suggested 6 minutes.
However, on the phone, all was not well. Since running this, the screen remains blank. When I power on, I get the HTC logo and then it disappears / disintegrates into a blank screen and nothing happens.
The only reason I ran this was to get rid of the irritating apps that I never use but have to Kill every day.
Can anyone help to overcome this problem? This was a replacement handset that I had to fight with my insurance company to get only for this to happen.
I am literaly at my wits end.
Thanks
Click to expand...
Click to collapse
i think you need to install custom rom and flash it in recovery follow the steps in instruction in ace hack kit because it happen to me also when I ran the ace hack kit..
avnr said:
i think you need to install custom rom and flash it in recovery follow the steps in instruction in ace hack kit because it happen to me also when I ran the ace hack kit..
Click to expand...
Click to collapse
Yes this is the best thing to do. Something must have corrupted your stock ROM. If AAHK completed properly, then you should have ClockworkMod recovery installed.
The first thing I did was install 4EXT recovery but thats not necessary, that was just a personal choice.
So these are the steps you should take:
1: Download a new ROM and put it on your SD card in a convenient place (I recommend the RCMIX32 Runny 3.1 ROM)
2: Remove the battery and reinsert the battery
3: Hold down the volume down button and then hold down the power button. You will get to a white screen with some green robots on the bottom. This is the bootloader screen. You will have to wait a bit for it to finish scanning the SD card. It will tell you when it is finished
4: Use the volume buttons to select recovery and press the power button to select it
5: After a few seconds the recovery environment will appear
6: Go to the wipe menu. Wipe data, cache and dalvik cache (and system if you have the option. I havent used Clockworkmod in a while so I cant really remember what options you have there)
7: Go a few menu's back and select Install zip from SD card
8: Select the zip file
9: Press yes on the confirmation screen
10: When it is finished, click reboot now. It might be on the menu back
This will install a new ROM and it should work properly. If you have any problems along the way just say and we will help to the best of our ability
Thanks for the responses.
I don't think ClockworkMod is installed as there are no options available when I select recovery. It just reboots the device back to the HTC splash screen which as mentioned then fades / deteriorates to a black screen. I had tried the Android HD Revolution rom but no difference.
One thing I did yesterday in my panic was to select 'Factory reset'. Will this have usb debugging setting?
Finally, when I connect to a pc, it doesn't see it. Is this because it's still set on charge only mode?
I'm probably my own worst enemy
If you finally press "Factory reset" you will reset USB debugging, then you can't root your phone using this tools kit. Try to reinstall the stock rom.
If you didn't root your DHD. Phone may still under warranty.
Hi Guys
I've managed to get this back up and running again.
After a lot of playing about with various file downloads last night, I finally managed to get my pc to see the phone. After that, I just downloaded a stock rom and installed it.
After this fright, I am reluctantly going to stick with this and not bother with rooting / custom roms.
Anyway, many thanks for all your responses, I really appreciate the time you took to helpo me out.
This forum absolutely rocks.
Hi,
I've just downloaded, I read the 'effen' manual and then ran ace-hack, it seems to have worked except I can't see clockwork mod recovery?
I can see superuser and ROMmanager, is it still ok to try and download and flash a custom ROM?
---------- Post added at 09:46 PM ---------- Previous post was at 09:03 PM ----------
Well to confirm my noob status I have now found that clockwork mod recovery is indeed installed (I assume you're not meant to be able to see it as an app as it sits at a lower level).
I downloaded the CM7 ROM, so have booted up into recovery mode, have wiped/formatted as instructed but when I choose the zip file from SD card it appears to start then aborts installation...help!!!!
Hi juicyp
juicyp said:
Hi,
I've just downloaded, I read the 'effen' manual and then ran ace-hack, it seems to have worked except I can't see clockwork mod recovery?
I can see superuser and ROMmanager, is it still ok to try and download and flash a custom ROM?
---------- Post added at 09:46 PM ---------- Previous post was at 09:03 PM ----------
Well to confirm my noob status I have now found that clockwork mod recovery is indeed installed (I assume you're not meant to be able to see it as an app as it sits at a lower level).
I downloaded the CM7 ROM, so have booted up into recovery mode, have wiped/formatted as instructed but when I choose the zip file from SD card it appears to start then aborts installation...help!!!!
Click to expand...
Click to collapse
Did you check the MD5 Checksum of the .zip before you copied it to your SD Card? as it might is some way have got corrupted.
Here is a link to what I always use before I copy anything to my SD Card or install on my OS System:- MD5 Check 2.1.
Take Care
TheQuest
Thanks!
I'm all sorted (I think, fingers crossed).
It was principally because of the mac unzipping (Safari preferences not checked), this was the original and prime fault.
That caused me to doubt my partitions on the SD card (google is sometimes your enemy) which I altered.
So what then happened was CM7 installed but upon reboot looped continuously on the android skateboarding screen.
I finally resorted to formatting the SD Card, reapplying the CM7 zip and the google zips and so far it looks good.
Of course I (me and me alone) has stuffed up all the user data I had on the SD card. I might try to recover some photos but stuff like contacts I can regenerate no major loss there.
Thanks for replying!!
CM7 - the experience thus far
Well its 72 hours since I took the plunge!
Initially it looked odd and felt flakey, the Market refused to download 80% of the apps I tried. I resolved this (not sure if it was the right way) by going into recovery and clearing the cache 2-3 times and eventually downloaded all of my old apps.
Some apps cause frequent force-closes, I assume because they've not been updated for Gingerbread? Thats a very minor irritant, I can easily live without these apps anyway.
Battery life hasn't noticeably altered yet but I suppose I have been constantly been tinkering, playing with settings, trying wifi (seems a little less sensitive to signals) and gauging how the radio is working - I seem to get HSPDA a lot less and resort to 3G more than I previously did?
So, done it, like it despite some minor reservations - now what, is there anything else I can do to improve the experience?
I must add one thing this has shown me - I really really know very little about what goes on under the hood. Despite 20+ years experience in CIS this is a very different world and all credit to those who have developed CM7!!
Please help if you can.. please
Hello!!
I am desperately seeking some guidance. Please.
So, I used to have a HTC Inspire 4G and in June I rooted it successfully.. then installed Cyanogenmod 7 etc.. everything worked great. I unfortunately lost the phone and because of insurance got a new one.
When I rooted the first time I used the old school method that was in the XDA forum.. ADB..etc.. but today... with the new replacement..
I downloaded Advance ace hack kit 29102011 (ahhk 29102011.zip) which after reading all the stuff I thought would be just a quicker way to get rooted. I used the same PC that I used before.
This time, unfortunately I am getting a black screen, right after the HTC splash screen shows up.. it fades to black.
I can get to the "Hboot" screen but removing the battery, then restarting by holding the power and the down vol button.
Tried Factory reset.. still fades to back
Tried Recovery .. still fades to back
The device will not be recognized on my laptop when connected to USB..
Am I stuck? Do I have any options?
I should have done what I did before.. but am at a loss right now.. will you please help me.
Please.
Thanks a million in advance for your responses.
Please help.
ravennyc said:
Hello!!
I am desperately seeking some guidance. Please.
So, I used to have a HTC Inspire 4G and in June I rooted it successfully.. then installed Cyanogenmod 7 etc.. everything worked great. I unfortunately lost the phone and because of insurance got a new one.
When I rooted the first time I used the old school method that was in the XDA forum.. ADB..etc.. but today... with the new replacement..
I downloaded Advance ace hack kit 29102011 (ahhk 29102011.zip) which after reading all the stuff I thought would be just a quicker way to get rooted. I used the same PC that I used before.
This time, unfortunately I am getting a black screen, right after the HTC splash screen shows up.. it fades to black.
I can get to the "Hboot" screen but removing the battery, then restarting by holding the power and the down vol button.
Tried Factory reset.. still fades to back
Tried Recovery .. still fades to back
The device will not be recognized on my laptop when connected to USB..
Am I stuck? Do I have any options?
I should have done what I did before.. but am at a loss right now.. will you please help me.
Please.
Thanks a million in advance for your responses.
Please help.
Click to expand...
Click to collapse
Try to run the latest RUU.
Similar Issue
Hi all,
Similar issue as the thread, during AAHK had a "file not found" issue and now, only get HTC screen fading to black. Getting into HBOOT works fine.
I do have S-OFF but;
Have tried recovery, nothing.
Any RUU nothing
ADB shows device is offline
running any other option in AAHK device offline
Any help would be greatly appreciated.
Cheers!