Develop Bugs

Yellow triangle gone!

After flashing back to calks 2.8.1 from the FB09 ICS. The yellow triangle at boot up is gone!
Sent from my SPH-D710 using XDA App

vwgti18 said:
After flashing back to calks 2.8.1 from the FB09 ICS. The yellow triangle at boot up is gone!
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
this is a lazy troll post from Bear Gri11z

So if i Odin the modem then flash calks over rooted el29 it will go away.
Sent from my SPH-D710 using Tapatalk

Will of fire said:
So if i Odin the modem then flash calks over rooted el29 it will go away.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
You guys know using the autoroot one click in the development section will get rod of the triangle right? Everytime I use it to get a kernel the triangle disapears

vwgti18 said:
After flashing back to calks 2.8.1 from the FB09 ICS. The yellow triangle at boot up is gone!
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Um I never had the yellow trianlge to begin with.....
You must not know there is a root that doesnt trigger the yellow triangle.

iSaint said:
You guys know using the autoroot one click in the development section will get rod of the triangle right? Everytime I use it to get a kernel the triangle disapears
Click to expand...
Click to collapse
Will that work on fb17 that's the question. I know that i haven't had it since the e4gt first came out.
Sent from my SPH-D710 using Tapatalk

i like my yellow triangle. i want to see how high i can get the odin count before i'm done with this phone.

Idk I did everything from the phone no Odin at all.
Will of fire said:
So if i Odin the modem then flash calks over rooted el29 it will go away.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA App

my usb jig won't get rid of the yellow triangle anymore...do these things go bad after awhile?

wase4711 said:
my usb jig won't get rid of the yellow triangle anymore...do these things go bad after awhile?
Click to expand...
Click to collapse
Wont work on the newer builds

iSaint said:
Wont work on the newer builds
Click to expand...
Click to collapse
thanks man, you saved me another 2 bucks on ebay!
Any way to get rid of this, for someone with an ALL OSX house? (no Odin)
should I hand back to an older rom and try, or am I wasting my time?
It doesn't bother me that much, and who cares what my flash count is...
running cm9 A3.1, perfectly now!

wase4711 said:
thanks man, you saved me another 2 bucks on ebay!
Any way to get rid of this, for someone with an ALL OSX house? (no Odin)
should I hand back to an older rom and try, or am I wasting my time?
It doesn't bother me that much, and who cares what my flash count is...
running cm9 A3.1, perfectly now!
Click to expand...
Click to collapse
http://www.mediafire.com/file/2la93jqrcqcrt5l/E4GT_Sbl_EG31.tar
^ Flash afterwards to allow reset jigs to work - Flash through the PDA option in Odin
It requires odin
Or you could use "Mobile odin" from the market I believe

iSaint said:
http://www.mediafire.com/file/2la93jqrcqcrt5l/E4GT_Sbl_EG31.tar
^ Flash afterwards to allow reset jigs to work - Flash through the PDA option in Odin
It requires odin
Or you could use "Mobile odin" from the market I believe
Click to expand...
Click to collapse
No Odin here..all mac house...I was thinking about buying mobile odin though

wase4711 said:
No Odin here..all mac house...I was thinking about buying mobile odin though
Click to expand...
Click to collapse
Aghh
Mac users can use Heimdall
Here's the link to it
http://www.glassechidna.com.au/products/heimdall/
Can't give you solid directions though I never used it but i hear there are lots of guides on the internets

wase4711 said:
my usb jig won't get rid of the yellow triangle anymore...do these things go bad after awhile?
Click to expand...
Click to collapse
I think Calk has a zip file in his new thread pertaining to using the USB jig
Edit: My bad was on wrong page I see it was already posted

supposedly, its the "newer" roms that don't let you do this; if I flash back to something "older", like Strong Steve or something like that, I wonder if the jig would work again?

wase4711 said:
supposedly, its the "newer" roms that don't let you do this; if I flash back to something "older", like Strong Steve or something like that, I wonder if the jig would work again?
Click to expand...
Click to collapse
no no not newer roms
newer builds
ex. FB15 & 17
EL29 ...
It works with EG30 I think

iSaint said:
no no not newer roms
newer builds
ex. FB15 & 17
EL29 ...
It works with EG30 I think
Click to expand...
Click to collapse
its been so long since I did it, I forgot the last rom it worked on..
This new white e4gt is really nice looking; glad my wife took my "used" black e4gt so I could have this shiny white new one!
Oh well, its not that big of a deal, and, eventually, once all these "leaked" roms are finished, and we have a "release" version, I am sure someone will figure out a way to get rid of it again..

It isn't the newer roms, it is the newer bootloader.
If you use the fb17 odin one-click in my sig you won't have that issue.

sfhub said:
It isn't the newer roms, it is the newer bootloader.
If you use the fb17 odin one-click in my sig you won't have that issue.
Click to expand...
Click to collapse
thanks for this man, I have a perfect cm9 a3.1 setup now, so I would hate to dump that right now..
Since I am an all osx house, can i just download mobile odin pro, and load it up into that and flash it, once I decide to take this plunge, or, is it smarted to follow the osx/heimndall instructions?
I guess your answer depends on whether or not you are a osx guy, or widows guy.

Blazer 4.0

I have the newest Blazer and my jig does not take away the odin count or triangle. Any help for this. I was in the actual rom thead its 500 pages long....
Thanks

Works for me. Do you turn the phone completely off then plug it in?
Sent from my Epic™ 4G Touch

You might want to try to Odin back to a stock EL29 - sfhub is the MAN for this http://forum.xda-developers.com/showthread.php?t=1433101 you can choose to save data or do a complete wipe; probably best to just wipe the whole thing. Then put on CWM+Rogue's recovery [it is NOT the touch recovery - YOU DON'T WANT THAT!] instructions for that are also in sfhub's post - read throroughly. Then apply Phantom Hackers Blazer ROM afterwards. Been running Blazer for a while now and found it to be the best ROM for me. Good luck.

leaderbuilder said:
You might want to try to Odin back to a stock EL29 - sfhub is the MAN for this http://forum.xda-developers.com/showthread.php?t=1433101 you can choose to save data or do a complete wipe; probably best to just wipe the whole thing. Then put on CWM+Rogue's recovery [it is NOT the touch recovery - YOU DON'T WANT THAT!] instructions for that are also in sfhub's post - read throroughly. Then apply Phantom Hackers Blazer ROM afterwards. Been running Blazer for a while now and found it to be the best ROM for me. Good luck.
Click to expand...
Click to collapse
I went back to complete stock using sfhubs package then install one click put on rogues recovery. reflashed my nandroid and all is good. I must of picked something up along the many roms I flash. I did use a different method of going to stock before with no help...hmmm
Appreciate your help. Thanks

Ok new problem, where is the camera zoom? also sometimes when receiving a call you cannot answer it..I get the screen but the touch screen does not work?
Thanks

What exactly is the odin count? How is it bad? and how can I check if mine is still at 0?

Ind3lible said:
What exactly is the odin count? How is it bad? and how can I check if mine is still at 0?
Click to expand...
Click to collapse
If you do not have a yellow triangle during the start of booting on your hone then you do not have an Odin count that goes over 0. After for what it does it tells your cell provider if you have flashed a custom anything pretty much.

U have to flash the SBL for the EG30 or EG31 roms. The newer bootloaders stopped the jig from working.
Sent from my Nexus S 4G using xda premium

cidica said:
If you do not have a yellow triangle during the start of booting on your hone then you do not have an Odin count that goes over 0. After for what it does it tells your cell provider if you have flashed a custom anything pretty much.
Click to expand...
Click to collapse
Oh I see OK cool man. I have flashed roms but no triangle. Yay!

[Q] yellow triangle

it there anyway to remove the yellow download? without odin or a usb jig. so like an app that works on gingerbread(EL29)

There is a proof of concept thread in the dev section that's supposed to work. It's worked for others but it never would for me. Oh and yes you will still need things like Odin and the like. Also the only real way to do it via a App is TriangleAway and it's only for ICS based roms.
http://forum.xda-developers.com/showthread.php?t=1297999&highlight=proof+of+concept

ok i guees ill upgrade to ICS to remove it then downgrade back

jamcar said:
ok i guees ill upgrade to ICS to remove it then downgrade back
Click to expand...
Click to collapse
By the time you flash back to gb the triangle will be back so its a lost cause
Sent from my SPH-D710 using Tapatalk

Chain made an app for it. I remember seeing it on Majijjah's post?

Haha 4 post and 20 views
Sent from my SPH-D710 using Tapatalk

Triangle Away
The current FC18 ICS leak is a very good right now. I've been trying all the releases and FC18 is about complete as i can tell. I would not be afraid to recomend just flashing a FC18 rom and staying with it. That also lets you use the Triangle Away app that's in the Market. If you search around i belive the developer has it posted for free on XDA. I have used the app and it works just fine.

The best way I can figure,
First of course, make a full Backup to flash back to at the end of this so you can keep all your settings.
Follow the instructions from http://forum.xda-developers.com/showthread.php?t=1433101 this post. This will basically flash you back to stock, El29 with root.
After that, follow the instructions from http://forum.xda-developers.com/showthread.php?t=1342728 this post using the e4gtauto.exe or zip if you perfer to get a working recovery.
Then reboot into recover, restore your backup and enjoy no yellow triangle.
None of this ups flash count (I believe, don't quote me on it). All of this is assuming your planning on staying Gingerbread.
THIS ASSUMES GINGERBREAD TO GINGERBREAD EL29-EL29. THIS MIGHT WORK FOR ICS TO GINGERBREAD BUT DON'T TRY THIS FOR GINGERBREAD TO ICS, IT JUST WOULDN'T WORK AND WOULD BE STUPID.
If this works for you, make sure to thank the authors of those two treads, they did all the work, I just did the research to find their work.
I don't know if there is a quicker way (probably is somewhere) but I have used this and it has worked with no problems.

I have a USB jig. What can I do with it? How do I use out to remove triangle?

iSaint said:
By the time you flash back to gb the triangle will be back so its a lost cause
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Not true. I had the triangle use TriangleAway and used Odin to go back to a GB build I've never seen it again. I also do not push kernels via Odin however anymore for that reason alone.

what exactly does the yellow triangle do and why is it bad?

orb360 said:
what exactly does the yellow triangle do and why is it bad?
Click to expand...
Click to collapse
It tells Sprint/Samsung that you rooted your phone if its there. That and it just looks ugly.
Sent from my SPH-D710 using xda premium

orb360 said:
what exactly does the yellow triangle do and why is it bad?
Click to expand...
Click to collapse
It's annoying to look at lol but triangle away is a quick and easy fix.

jamcar said:
it there anyway to remove the yellow download? without odin or a usb jig. so like an app that works on gingerbread(EL29)
Click to expand...
Click to collapse
Here is the Triangle Away App...works just as advertised:
http://db.tt/UsVrwgbq
Sent from my SPH-D710 using Tapatalk 2 Beta-2

flash stock/remove odin count

couldnt find a thread for this question although ive seen it before so sorry for re-post?
my phones been turning off randomly and i dont know why. im running fd05w/root and thats it. i do have a battery saver but i dont think thats the issue.
i wanna take it into sprint but want to make sure iam completely "clean" with my firmware etc..
soo how how/what is latest version of stock for e4gt? and how to get rid of the odin count..mines at like 3 or 4

EL29 is the latest stock. There is the triangle away app that works on ICS. USB Jig on an old bootloader is the normal way.
But random rebooting can happen with the leaks especially roms installed without full wiping. Had one the other day but it was regular on some of the roms i didn't install the way i should have.
If you had a USB jig the easiest way to do it is use sfhubs ODIN one click go back to EK02. Use the USB jig and then OTA update to EL29 which will leave you on a stock unrooted EL29. Factory reset for good measure. http://forum.xda-developers.com/showthread.php?t=1409634
Might be the long way of doing it but it would be very proper.
You can oneclick odin to a stock rooted EL29 and i believe use the autorooter to unroot but id play with EL29 before returning your phone. If there is nothing wrong with your phone you run the risk of getting a refurb thats worse than what you have. They're all refurbs.

RainMotorsports said:
EL29 is the latest stock. There is the triangle away app that works on ICS. USB Jig on an old bootloader is the normal way.
But random rebooting can happen with the leaks especially roms installed without full wiping. Had one the other day but it was regular on some of the roms i didn't install the way i should have.
If you had a USB jig the easiest way to do it is use sfhubs ODIN one click go back to EK02. Use the USB jig and then OTA update to EL29 which will leave you on a stock unrooted EL29. Factory reset for good measure. http://forum.xda-developers.com/showthread.php?t=1409634
Might be the long way of doing it but it would be very proper.
You can oneclick odin to a stock rooted EL29 and i believe use the autorooter to unroot but id play with EL29 before returning your phone. If there is nothing wrong with your phone you run the risk of getting a refurb thats worse than what you have. They're all refurbs.
Click to expand...
Click to collapse
sounds like i should just deal with it right now.. what did you do?

dirtyglove said:
sounds like i should just deal with it right now.. what did you do?
Click to expand...
Click to collapse
I wouldn't deal with it if its bad. Id flash EL29 rooted from one click and make sure my phone was fine for a day or so and then probably flash back to FD05 see how it is. The worst reboot problems I ever had was when i upgraded from Calks 1.3 to 1.3a using ICS CWM like i shouldnt have been. A clean reflash fixed it for me but other people said they had issues. I have only noticed one reboot on FD05 so far i was in the middle of doing something. But other situations it was every hour or once a day.
If you need something to backup contacts, messages and call logs superbackup works great.

RainMotorsports said:
I wouldn't deal with it if its bad. Id flash EL29 rooted from one click and make sure my phone was fine for a day or so and then probably flash back to FD05 see how it is. The worst reboot problems I ever had was when i upgraded from Calks 1.3 to 1.3a using ICS CWM like i shouldnt have been. A clean reflash fixed it for me but other people said they had issues. I have only noticed one reboot on FD05 so far i was in the middle of doing something. But other situations it was every hour or once a day.
If you need something to backup contacts, messages and call logs superbackup works great.
Click to expand...
Click to collapse
i was on el39 3.0 form calk..should i go completely back to el29 stock?

dirtyglove said:
i was on el39 3.0 form calk..should i go completely back to el29 stock?
Click to expand...
Click to collapse
The ONLY way you should go back from ICS to GB is through ODIN. So EL29 One Click and then howver you wish to get CWM but sfhubs auto rooter will do it for you. If you prefer to go back to calk's 3.0 you can then flash it from cwm and be back where you were.
But if you flashed from Calk's 3.0 to FD05 without erasing data just so you know thats a potential problem for alot of things. Old settings aren't great. Always format all if flashing an ics rom or use the data erasing odin's if going that way.

back to gb
I have ics blend xplod mini currently flashed,so the only safe way to go back to a el 29 gb is to directly Odin back to it?
Using calk format all then flashing a gb rom is setting myself up to fail?

habitformer said:
I have ics blend xplod mini currently flashed,so the only safe way to go back to a el 29 gb is to directly Odin back to it?
Using calk format all then flashing a gb rom is setting myself up to fail?
Click to expand...
Click to collapse
Off the top of my head i cant remember if its garunteed fail but pretty sure it is.
Youve already been warned by steady to NOT flash any rom with ICS recovery repacks. Despite many of us having success others have ended up with permanent bricks. Im not at home to look for you but best i remember ics to gb is odin safe cwm fail.

Yes the safest way is to Odin one click touch back to EL29. then wipe all cashes. Don't cwm back to el29. It might work. But it might brick.

Search triangle away apk. It reset my flash count and removed yellow triangle at start up.
Sent using Tapatalk 2 Beta-5 on Nocturnal Venum rc1.1

dirtyglove said:
couldnt find a thread for this question although ive seen it before so sorry for re-post?
my phones been turning off randomly and i dont know why. im running fd05w/root and thats it. i do have a battery saver but i dont think thats the issue.
i wanna take it into sprint but want to make sure iam completely "clean" with my firmware etc..
soo how how/what is latest version of stock for e4gt? and how to get rid of the odin count..mines at like 3 or 4
Click to expand...
Click to collapse
There is a known issue with several of the FC and FD sites leaks in relation to 4G. Nobody has quite figured out the reason for it but 4G is the cause. Try running without 4G or on an older version of Android to see if the resets are software related our hardware. Maybe save yourself the trip and extra work.
Goods luck either way!

Rooted with Zedomax + Caulkins Rom. Constantly rebooting.

Reboots usually about 10+ times a day. During calls etc. Any way to remedy this?
Note: it doesn't restart from the very beginning it freezes, goes black then boots up the lock screen all media connects are restarted etc.
From the limited amount of research I've done the zedomax method for rooted is no longer used? (Currently I get the yellow exclamation point at reboot).
What do I need to do (in lame mans terms) to get my phone back to normal?
TIA!

Easiest way is to one click Odin. I'm not sure which your on. I'm assuming GB. So you can one click Odin to stock el29+ root. Or if you want one click Odin to FF18 or FH13 to upgrade to ICS. And if your on ICS you can use triangle away to get rid of yellow triangle on the splash screen.
Sent from my SPH-D710 using xda premium

If ur on the GB ROM look at the op for calks page and he has a mention and zips to flash to fix that. Scripts more or less to undervolt it
Sent from my SPH-D710 using xda app-developers app

Using ZedoMax kernel is your problem from the get go. Even Zedomax would have a good laugh at that. Its an OLD OLD kernel.
EG30 and EK02 can be rooted via usb with the zerg exploit and sfhubs auto root made that easy. Easiest way with EL29 or the newer ICS firmwares as well is just to flash a prerooted one click. But you can always odin a kernel with custom recovery and flash super user.

RainMotorsports said:
Using ZedoMax kernel is your problem from the get go. Even Zedomax would have a good laugh at that. Its an OLD OLD kernel.
EG30 and EK02 can be rooted via usb with the zerg exploit and sfhubs auto root made that easy. Easiest way with EL29 or the newer ICS firmwares as well is just to flash a prerooted one click. But you can always odin a kernel with custom recovery and flash super user.
Click to expand...
Click to collapse
Yeah, Zedomax is quite a flashback. I'm actually slightly impressed OP was even able to find the kernel in the first place...

Freeroot said:
Yeah, Zedomax is quite a flashback. I'm actually slightly impressed OP was even able to find the kernel in the first place...
Click to expand...
Click to collapse
There's been quite a few new epic users to the forums lately as their evo phones were replaced with this one for a replacement thru sprint. Quite a few old threads on rooting, kernels and themes have been resurrected in the last 30 days or so as a result.
Sent from my SPH-D710 using xda app-developers app

g_ding84 said:
Easiest way is to one click Odin. I'm not sure which your on. I'm assuming GB. So you can one click Odin to stock el29+ root. Or if you want one click Odin to FF18 or FH13 to upgrade to ICS. And if your on ICS you can use triangle away to get rid of yellow triangle on the splash screen.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yes I'm on GB EL29. Would this be the correct method detailed in this video?
http://www.youtube.com/watch?v=v7pWjmKCsoc

dante32278 said:
There's been quite a few new epic users to the forums lately as their evo phones were replaced with this one for a replacement thru sprint. Quite a few old threads on rooting, kernels and themes have been resurrected in the last 30 days or so as a result.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Yhup, you would be correct. Coming from old EVO.

simply dave said:
Yes I'm on GB EL29. Would this be the correct method detailed in this video?
http://www.youtube.com/watch?v=v7pWjmKCsoc
Click to expand...
Click to collapse
Other relevent info is I am using a Mac and can't open .exe files. Is there a work around? . . . and do I need to unroot before doing this one click odin or will this just replace my old root while preserving my info?
Thanks.

simply dave said:
Other relevent info is I am using a Mac and can't open .exe files. Is there a work around? . . . and do I need to unroot before doing this one click odin or will this just replace my old root while preserving my info?
Thanks.
Click to expand...
Click to collapse
Use Heimdall to flash tars then. Grab the one for FH13 if you want the latest official ICS or EL29 if you want the last GB out. Sfhubs one click threads have a second post with the tars as for FH13 dunno how Garwynn and rwilco have their stuff arranged.

RainMotorsports said:
Use Heimdall to flash tars then. Grab the one for FH13 if you want the latest official ICS or EL29 if you want the last GB out. Sfhubs one click threads have a second post with the tars as for FH13 dunno how Garwynn and rwilco have their stuff arranged.
Click to expand...
Click to collapse
I would like ICS. I haven't done any rooting/ flashing in a long time. Is there anyway you'd be able to explain so that an idiot like me could understand please?
(I looked at sfhubs page and got really confused)

You can check out QBking's videos on YouTube he has quite a few tutorials for the e4gt
Sent from my SPH-D710 using xda app-developers app

dmonger11b said:
You can check out QBking's videos on YouTube he has quite a few tutorials for the e4gt
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I've seen his videos. I linked to it in my previous post however he doesn't have detailed instructions for Mac users.

simply dave said:
Thanks, I've seen his videos. I linked to it in my previous post however he doesn't have detailed instructions for Mac users.
Click to expand...
Click to collapse
You have CWM recovery right?
If so copy Calks rom onto your phone, if you don't still have it there.
Download the EL29 zip file to your phone from http://rwilco12.androidfilehost.com...y Kernels/GB/Rogue Recovery/Stock Repacks/ZIP.
Instll that zip from recovery and reboot back into recovery.
Install Calks Rom again.
You should be fixed now.
If you prefer to go with FH13 (ICS):
Download the AGAT_v0.5.4.zip file to your phone from http://rwilco12.androidfilehost.com...y Kernels/ICS/Agats Source Built Recovery/ZIP
Copy this file to your phone http://d-h.st/Txi
Install the FH13 Rom from recovery.
Instll the AGAT_v0.5.4.zip while still in recovery.
You should be fixed on FH13 now.
If you want the Modem you can download the FH13 modem zip from here and flash it from recovery. http://rwilco12.androidfilehost.com/ModemSite/?dir=MODEMS/ICS/ZIP

crawrj said:
You have CWM recovery right?
If so copy Calks rom onto your phone, if you don't still have it there.
Download the EL29 zip file to your phone from http://rwilco12.androidfilehost.com...y Kernels/GB/Rogue Recovery/Stock Repacks/ZIP.
Instll that zip from recovery and reboot back into recovery.
Install Calks Rom again.
You should be fixed now.
If you prefer to go with FH13 (ICS):
Download the AGAT_v0.5.4.zip file to your phone from http://rwilco12.androidfilehost.com...y Kernels/ICS/Agats Source Built Recovery/ZIP
Copy this file to your phone http://d-h.st/Txi
Install the FH13 Rom from recovery.
Instll the AGAT_v0.5.4.zip while still in recovery.
You should be fixed on FH13 now.
If you want the Modem you can download the FH13 modem zip from here and flash it from recovery. http://rwilco12.androidfilehost.com/ModemSite/?dir=MODEMS/ICS/ZIP
Click to expand...
Click to collapse
Thanks for being my hero. Everything works (so far). And after some trial and error even the wireless tether works. Now if I could just get my iPad to link to my wifi I'd be golden...
Thanks again!

simply dave said:
Thanks for being my hero. Everything works (so far). And after some trial and error even the wireless tether works. Now if I could just get my iPad to link to my wifi I'd be golden...
Thanks again!
Click to expand...
Click to collapse
No problem. I am partial to the Sprint hotspot hack myself. In the dev section by rejulus22.
Sent from my SAMSUNG-SGH-I747 using xda premium

Bump.
Different issue:
1. I keep getting a FI27 Software Update reminder. I am able to clear it out of my notifications but 5-10 mins it's back again. It will interrupt whatever it is I am doing at the moment.
2. Is there a separate current radio I can download? My gps can never find my current location, rendering the turn by turn feature useless since I can't use it.
Any thoughts?
TIA

simply dave said:
Bump.
Different issue:
1. I keep getting a FI27 Software Update reminder. I am able to clear it out of my notifications but 5-10 mins it's back again. It will interrupt whatever it is I am doing at the moment.
2. Is there a separate current radio I can download? My gps can never find my current location, rendering the turn by turn feature useless since I can't use it.
Any thoughts?
TIA
Click to expand...
Click to collapse
The link given earlier to download the modems contains the FI27 modem. You could flash that and it may get rid of the update reminder.
http://rwilco12.androidfilehost.com/ModemSite/?dir=MODEMS/ICS/ZIP

Use titanium backup freeze system updates. Then go to recovery and wipe cache and dalvik.
sent from MY BAD A$$ ET4G

patrao_n said:
Use titanium backup freeze system updates. Then go to recovery and wipe cache and dalvik.
sent from MY BAD A$$ ET4G
Click to expand...
Click to collapse
What this guy said. Didn't think about that.