Tegrak works on ICS now - Samsung Epic 4G Touch

I just wanted to let everyone know that tegrak has been updated and works with ICS on our phones now. I am currently running Codename with -75 undervolt.
It will work on stock ICS kernel.

shiftr182 said:
I just wanted to let everyone know that tegrak has been updated and works with ICS on our phones now. I am currently running Codename with -75 undervolt.
It will work on stock ICS kernel.
Click to expand...
Click to collapse
Yup!
I posted this in the AOKP thread actually. I saw it fly past my twitter that it was updated for GalaxySII but figured it was for the international versions, or for that matter just non-sprint. But I updated it and it does indeed allow overclocking.

Yeah, pretty freaking sweet....cant wait to see how much more I can get out of the battery now.

I'll be even more excited when we have the source for the kernel. I would like to see some more governors available, such as Smartass. The three we have available, User Space, On Demand and Performance aren't really spectacular, though they do the job.

Really hell yeah i sent an email to dev about supporting ics on next update
Sent from my SPH-D710 using Tapatalk

Thanks for the heads up! Now off to overclock!

Woo hop....1.42 freezes...running at 1.3 with no problems
Sent from my SPH-D710 using xda premium

1.6ghz @1475mv like a boss
Sent from a phone with kNOw CiQ k0nane...

shiftr182 said:
I just wanted to let everyone know that tegrak has been updated and works with ICS on our phones now. I am currently running Codename with -75 undervolt.
It will work on stock ICS kernel.
Click to expand...
Click to collapse
Did you set everything to -75?
Sent from my ICS'ed out SPH-D710

neudof said:
Did you set everything to -75?
Sent from my ICS'ed out SPH-D710
Click to expand...
Click to collapse
I subtracted 75mv from all of the voltages. So it is undervolted by 75mv. Definitely seeing longer battery life than yesterday, but the rom was also flashed yesterday, so it might just be settling in.

I have had numerous kernel panic lockups and spontaneous reboots trying to use tegrak at speeds and voltages that were perfectly stable on 2.3. I even tried to go a little higher on voltages. Still reboots. Think it just isn't ready for primetime yet.
Sent from my SPH-D710 using xda premium

Ive contacted the dev about several things Ive seen. Like when you clear dalvik cache it will hang on boot, need to pull battery. I hope Im not the only one that happens to.
Sent from a phone with kNOw CiQ k0nane...

I had is set to restore on boot, but when the phone would boot, it would lock up. I can restore after boot just fine, just not with boot.

Was running at 1400 @ 1275 mv on GB for months with no issue...For some reason the builds (calk fc15 at least) gives me no errors but it kicks it down to 800 max after awhile...I'm just using it for undervolting the cpu and gpu for now...

atlantadude1972 said:
Was running at 1400 @ 1275 mv on GB for months with no issue...For some reason the builds (calk fc15 at least) gives me no errors but it kicks it down to 800 max after awhile...I'm just using it for undervolting the cpu and gpu for now...
Click to expand...
Click to collapse
Calkulins roms have the battery saver script in them that controls the CPU clock. Even if you over clock on Calkulins, it will go back to whatever his script says unless his script allows the app that your using to overclock.

His script disables if it sees any other app that controls cpu.
Dicho por el E4GT de latinmaxima

I would see absolutely no need to overclock this phone, but I can definitely get behind undervolting at stock speed. Neato.

just installed and oc'd to 1.3ghz, and undervolted by -75 for each frequency. Also, somewhat weird is that no benchmark shows a second core. Does AOKP not use both cores?
transmitted via a galaxy in quadrant 2, with some ice cream.

Is anyone else having issues with calks ics rom 1.2 which is fc18 bases. I can't underclock to 800 it sticks at 1000
Sent from my SPH-D710 using xda premium

I just had another Tegrak update show up. It seems geared specifically towards the SGS2's or is this the same one and it somehow missed me?
Sent from my SPH-D710 using xda premium

Related

[Q] Overclock g2 1.9mhz

How do you get kernal to overclock g2 to 1.9mhz
Sent from my T-Mobile G2 using XDA App
I thought at those it blows up!!!
Sent from my LG-P999 using XDA Premium App
You need flippys g2 fast kernel, http://forum.xda-developers.com/showthread.php?t=839687
Why do you want to OC to 1.9?
Sent from an ice cream sandwich
For me the 1.9 ghz kernel is a bit unstable for every day use . But oc at 1.5cm kernel works much better and 100% sable and battery friendly if you use profile in setcpu.
stian230 said:
For me the 1.9 ghz kernel is a bit unstable for every day use . But oc at 1.5cm kernel works much better and 100% sable and battery friendly if you use profile in setcpu.
Click to expand...
Click to collapse
Unfortunately, that varies by phone. Mine becomes unstable and 1.5GHZ
liltay53 said:
How do you get kernal to overclock g2 to 1.9mhz
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I have to say. If you gotta ask dont do it! Make sure you setup good profiles for heat or you run a serious risk of frying your phone! Good luck some people got lucky and have no problems running 1.9. My phone has no problem with that speed until for some reason i have yet to discover somthing makes it heat up at random times. After that happened a few times i decided 1.5 is plenty.
Sent from my HTC Vision using XDA Premium App
I thinks it's underclocked @ 1.9Mhz
Root the phone
Install ROM Manager from the Android Market
In ROM Manager, flash Clockworkmod Recovery
Also in ROM Manager, backup ROM ("nandroid" backup)
Download the kernel and put it on the SD card.
Flash kernel from Recovery
Get SetCPU or CPU Tuner to set the CPU clock
As already mentioned, if you want to OC that high, SetCPU profiles with temp failsafes, etc. are a must. You might want to start with lower CPU clock speeds.
If you need more guides on how to get this done:
http://forum.xda-developers.com/showthread.php?t=916431
The Wiki guide is considered the safest way to root:
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
kernel manager has it.
Yeah, it does. Unfortunately for me, it's stable for less than five blazingly-fast minutes Guess I'll stay at 1.5!
I think for a phone that was clocked at 800, 1.9 is far too risky. I have no factual basis to say that, just seems like common sense.
Sent from my HTC Vision using XDA Premium App
^I agree^ That doesn't seem logical....
I can't see OC our phones to 1.9 being good on any level. Seems like were trying to push the hardware a bit too far.
Is that how people are able to get Quadrant scores in the 2000+? I can't seem to get that high at all. I have been using pershoot's kernel with CM7...but now on nightly #91- using stock kernel now. I have been cautious on trying out this one...
liltay53 said:
How do you get kernal to overclock g2 to 1.9mhz
Click to expand...
Click to collapse
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
dhkr234 said:
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
Click to expand...
Click to collapse
I really think they meant GHz...at least I hope so...
dhkr234 said:
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
Click to expand...
Click to collapse
Lol, i think he meant GHz, typo =P..
As for quadrant, my DZ easily hits an average of 2100+ when OCed to 1.3GHz using Virtuous G-Lite 1.0.2. I really don't trust those benchmarks though, as long as the battery lasts and the UI is smooth, I can't really complain.
Sent from my T-Mobile G2 using XDA App
Well...ok, I was just trying to make sure I wasn't missing a step. I am happy with my phone's performance, so I will not be concerned about that anymore.
Tommebaas said:
I thinks it's underclocked @ 1.9Mhz
Click to expand...
Click to collapse
Bravo! I can't believe nobody else caught that.
1.9Ghz will sometimes cause my phone to either overheat or crash. I have it set to 1.516Ghz on Pershoot's kernel.
Sent from a Western Union telegram.

[Q] what ROM has the best benchmarkz

Hi everyone just ported over from the evo 3d. I would of thought the e4gt would have a lot of fast roms with my eco on antutu I bench just alil over 7000+. I thought the e4gt would get over 8000 if not close to 9000. but I can for some reason the best ROM I can find is just alike 7600+ and that's with it clock at 1.6. Can someone point me in the right direction? OP yea one last thing how come every ics ROM I tried has some serious low benchmarks I thought ics was going to be God compared to GB?
Cause ICS are leaks right now and overclocking is not able to be done yet. Remember benchmarks dont mean squat.
Sent from my SPH-D710 using xda premium
musclehead84 said:
Cause ICS are leaks right now and overclocking is not able to be done yet. Remember benchmarks dont mean squat.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I know to some people they don't mean anything but to me I due see and feel a better system and benchmarks just confirm it for me all the ics looks cool but is just a Lil to laggy for my
jay2nice000 said:
I know to some people they don't mean anything but to me I due see and feel a better system and benchmarks just confirm it for me all the ics looks cool but is just a Lil to laggy for my
Click to expand...
Click to collapse
My benchmarks were all over too.. on GB, blazer 4.1 with gunslinger oc'd to 1.6g got close to 7300 in antutu, but gets 6600 in quadrant. On ICS, CM9a2 had a quadrant score of 5850 and antutu was about 6300.. (can't OC yet on ICS)
sj
Sent from my SPH-D710 sgs2e4gt on AoKPb31 FD02 AOS 4.0.4 using [email protected] 2 Beta 5
Clark el29 at 1.6
musclehead84 said:
Cause ICS are leaks right now and overclocking is not able to be done yet. Remember benchmarks dont mean squat.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
ICS kernels are now overclockable with Tegrak, sir =]
Sent from my SPH-D710 using Tapatalk
*Luke* said:
ICS kernels are now overclockable with Tegrak, sir =]
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I tried with tegrak can only go up to 1.45 and can't handle it. It can only handle 1.4 I guess I'm gonna play with voltage after my phone cools down
jay2nice000 said:
I tried with tegrak can only go up to 1.45 and can't handle it. It can only handle 1.4 I guess I'm gonna play with voltage after my phone cools down
Click to expand...
Click to collapse
Using the optimization settings you should be able to get a little higher. Getting the voltage right is going to be the trick for sure.
Sent from my SPH-D710 using Tapatalk
*Luke* said:
Using the optimization settings you should be able to get a little higher. Getting the voltage right is going to be the trick for sure.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
thanks for the advice but i over did it i kinda fried my gpu its ok tho i was still under 30 days at best buy. i learned my leason i will no longer overclock pass the kernel lol
fried the gpu, wow. Because Ive had mine maxed at 400mhz and voltage all the way up for hours of benchmark tests. Must of been a bad unit, or Im super lucky.
Sent from my SPH-D710 using xda premium
How you have such high bench Marks ? I'm using cm9 alpha 2 also as a daily driver and once i ran a bench Mark my scores were in the 3000
Epic touch phone of xXHELLBoy91Xx
I have pulled down quadrant scores of 4100 easy running blazer 3.8 rom with stock EK02 kernel some reason my phone really like that one. I have since upgraded to 4.1 and EL29 still able to hit between 3600 to 4000. I have manage a 5550 with gunslinger at 1.6 but it was a clean install NOTHING but setcpu was added and quadrant. to be honest after all that bench marking didnt see a bit of feel diffrence only thing I noticed was how bad it hurt my batt life. I have been playing with supercharged v6 script on stock el29 blazer 4.1 for the past few days seems like it did smooth out a few things and didnt kill my battery maybe you could try that see what happens.
BTW wasnt desperado the kernel used with blazer rom that got like a 6000 not 100% on that but I think it was
pclev99 said:
I have pulled down quadrant scores of 4100 easy running blazer 3.8 rom with stock EK02 kernel some reason my phone really like that one. I have since upgraded to 4.1 and EL29 still able to hit between 3600 to 4000. I have manage a 5550 with gunslinger at 1.6 but it was a clean install NOTHING but setcpu was added and quadrant. to be honest after all that bench marking didnt see a bit of feel diffrence only thing I noticed was how bad it hurt my batt life. I have been playing with supercharged v6 script on stock el29 blazer 4.1 for the past few days seems like it did smooth out a few things and didnt kill my battery maybe you could try that see what happens.
BTW wasnt desperado the kernel used with blazer rom that got like a 6000 not 100% on that but I think it was
Click to expand...
Click to collapse
im not to sure but calkulin rom is better. for some odd reason i couldnt Oc blazers rom but i ran it stock vs calk el29 stock and calk won. though there was another rom that was ics and did beat calks rom but thats when my gpu friend and im gonna try to find it again. it did beat claks stock Non Oc by like 400 points. i know if i could find it again and try messing around with the Oc i could get real close to 8000 benchmark we will see what happens
az18zz said:
How you have such high bench Marks ? I'm using cm9 alpha 2 also as a daily driver and once i ran a bench Mark my scores were in the 3000
Epic touch phone of xXHELLBoy91Xx
Click to expand...
Click to collapse
In my eyes i think GB is faster than ics i used Calkulin's E4GT v3.0 EL29 Oc to 1.6gz. i have tested over the top roms and nothing comes close i have even Oc to 2.00 with other roms and still doesnt beat this rom. though other rom due look better.
TeamERA said:
fried the gpu, wow. Because Ive had mine maxed at 400mhz and voltage all the way up for hours of benchmark tests. Must of been a bad unit, or Im super lucky.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
i think your lucky because everytime i pushed 400 i would only get 10 seconds at best before either it froze or turn my screen green would have to wait till it cooled off to trying messing with it again but thats what i got insurance for

Best kernel for aokp?

Who knows a good kernel that works well with aokp milestone 6 rom I want to do some over clocking and under clicking to save battery as well any suggestions?
Sent from my SPH-D710
Newest update for AOKP allows over/under clocking as well as new governors.
Sent from my SPH-D710 using xda app-developers app
Are you sure I just flashed it and it reboot every time I try to underclock it
Sent from my SPH-D710
Jacob910 said:
Are you sure I just flashed it and it reboot every time I try to underclock it
Sent from my SPH-D710
Click to expand...
Click to collapse
Lowest you can go is 1000 mhz on the cpu, other wise it will crash. That is a limitation of ICS and our phone.
Jacob910 said:
Who knows a good kernel that works well with aokp milestone 6 rom I want to do some over clocking and under clicking to save battery as well any suggestions?
Sent from my SPH-D710
Click to expand...
Click to collapse
I am running milestone 6 and using chris41g's twrp rc1-b3 and everything seems to be working although I haven't tested 4g. Currently trying pegasusq gov and sio scheduler. Can't comment about battery life yet but I've read people have been getting good results with the combo.
Really well that kind of sucks o well thanks
Sent from my SPH-D710
What's the lowest you have had the CPU go? 1000 right?
Sent from my SPH-D710

Best route for overclocking with CM10?

This is my first rooted device and I'd like to set the CPU frequency higher. I've read that 1600 is moderately safe and 1800 is feasible. After installing setcpu I've realized that CM10's kernel does not allow overclocking. What is the best action to take? Am I out of luck if I want to stick with CM10? Or is there another kernel I can use compatible with CM10? Thanks for reading.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Try kt kernel in original development, I've used it with great success. Has oc up to 1.89. Also allows you to under volt to save some battery. In conjunction with ktoonz kernel get voltage control from the market to adjust cpu clock and voltages.
Sent from my SGH-I747M using Tapatalk 2
I use Leankernel to go up to 1.9Ghz :good:
Rocket Nine said:
This is my first rooted device and I'd like to set the CPU frequency higher. I've read that 1600 is moderately safe and 1800 is feasible. After installing setcpu I've realized that CM10's kernel does not allow overclocking. What is the best action to take? Am I out of luck if I want to stick with CM10? Or is there another kernel I can use compatible with CM10? Thanks for reading.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Mine has been getting pretty damn hot just at stock clock speeds...you sure you want to do that? CM10 is so fast already!
fortesquieu said:
I use Leankernel to go up to 1.9Ghz :good:
Click to expand...
Click to collapse
Thanks for the suggestion. I used Leankernel all day without a single issue that isn't specific to CM10 right now.
P.S. I also upgraded the modem to I747UCLH1 from this thread. To anyone interested, test your data speed on all three modems to find the best one to keep. My rates doubled with this new modem.
Kt new kernel up. 2.1ghz ktweeker app. Running Sammy version and it's blazin fast.
Sent from my SAMSUNG-SGH-I747 using xda premium
ovwerclock
Hey this might be a bit late on this thread, but Siyah has just released an updated, which works with cm10 and allows for overclocking up to 1600, and undervolting to save on that ole battery... currently for the galaxy s3
Obligatory reminder:
Not all phones are the same. Some tolerate overclock/undervolt better than others. What you WANT your phone to do may not actually be what it WILL do. Start slow, only change one step at a time. I would recommend finding the perfect oc point for your phone, then slowly, slowly working the undervolt into it.

Cyanogenmod 7 and 10 overclocking questions

hi i'm looking to overclock my sprint epic 4g cpu up to 1.8ghz and also the gpu to 300mahz and 72hz refresh rate
on either cyanogenmod 7 or 10
what kernel and ROM and CPU/GPU overclocking apps should I use with voltage control and what (safe) voltages should I try for the cpu and gpu ARM and Internal voltages (what build number do I need for cm 7 or 10 (either stable or nightly)
also I noticed that the slide out keyboard shift and function keys don't work on cyanogenmod 10 stable build not sure about a nightly build
I'd like to fix the keyboard too
i'd like to be able to turn the boot logo on and off and possibly change it to a different one and also add a boot up sound to the logo
should I use the franko or samurai or maybe a different kernel ?
what modem should I use for max speed (EL30 FC09 FC19 or Nexus LF2 K2 ?) and compatible rom
I know how to install everything just need advice
If all of the above isn't possible at least I'd like to get the CPU to the highest possible speed past 1.2 ghz if possible most of all and not have random reboots or lockups or sleep of death and woking keyboard and least amount of bugs in the rom
Thank you so much in advance for any advice
Do your shift and Fn keys work if you hold them down when using them? Kind of like the way you would use them on a PC keyboard?
Sent from my SPH-D700 using Tapatalk 2
Last thing I know of that had what you're looking for is CM9 with Samurai Kernel. The processor clocks to 1.5 Ghz and I believe the gpu is overclocked to 400Mhz. Idk what the refresh rate for the screen is, but that combo would probably be the closest to what you're looking for
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
Last thing I know of that had what you're looking for is CM9 with Samurai Kernel. The processor clocks to 1.5 Ghz and I believe the gpu is overclocked to 400Mhz. Idk what the refresh rate for the screen is, but that combo would probably be the closest to what you're looking for
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
I used it before, it really messed up my phone.
glad to hear/see any follow ups.
using CM10.1 overclocked.
jeffreyjicha said:
Last thing I know of that had what you're looking for is CM9 with Samurai Kernel. The processor clocks to 1.5 Ghz and I believe the gpu is overclocked to 400Mhz. Idk what the refresh rate for the screen is, but that combo would probably be the closest to what you're looking for
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
^^^^this... there is no franco kernel here, that's for the epic touch... nobody has been able to overclock this phone past 1.6 Ghz... samurai had 1.6 at one point, but it was removed because there were stability issues with most phones trying to overclock that high... samurai has always been my favorite kernel from tw gb roms all the way to cm9... sadly development stopped when earthbound upgraded and there is no samurai kernel for cm10 or 10.1... everybodies phone is different and handles overclocking differently... best bet is to just keep trying combinations until you find your perfect match...
SubCool said:
Bump
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
I don think you can get what you're looking for . the answers provided should be enough to tell you that this phone can't be oc'ed that much
Sent from my LG-MS770 using xda app-developers app
lmsomb said:
I don think you can get what you're looking for . the answers provided should be enough to tell you that this phone can't be oc'ed that much
Sent from my LG-MS770 using xda app-developers app
Click to expand...
Click to collapse
Um- the responses tell me its capable..
HOw do you individually OC the GPU?
SubCool said:
Um- the responses tell me its capable..
HOw do you individually OC the GPU?
Click to expand...
Click to collapse
Not possible on cm10... with cm7 you'll have to dig around and search for samurai kernel...
flastnoles11 said:
Not possible on cm10... with cm7 you'll have to dig around and search for samurai kernel...
Click to expand...
Click to collapse
I have a link to the CM9 kernel that goes to 1.5Ghz.
flastnoles11 said:
Not possible on cm10... with cm7 you'll have to dig around and search for samurai kernel...
Click to expand...
Click to collapse
I have used it on CM9, and got it to 1.4 comfortably, but the kernel itself was quarky as hell. The battery died when unclocked and- just all in all at bad kernel.
im curious on what he did to make it do that though. Was it an app he combined into the kernel? Did he expand something?
Technically- OC"ing is just like any normal OC. INcrease the multiplier or frequency and then manipulate the voltage to handle the work. But- THe couple app i foudn that do that- like uh... setcpu, targek or something all arent supported by our rom/kernel/ something. Its rather frustrating.
With the Packman ROM im using, he combined the Performance control into the rom, and you can actually change the voltages- but.. i cant make it go faster.
TO go on with that- i still cant find a way to OC the GPU. i see people saying they got it up to 400mhz. or something. But- HOW!? an app? Kernel again!? heck, i dont even know what the stock settins are. :/
GPU overclocking is achieved in the kernel.
Friendly Neighborhood Moderator
SubCool said:
I have used it on CM9, and got it to 1.4 comfortably, but the kernel itself was quarky as hell. The battery died when unclocked and- just all in all at bad kernel.
im curious on what he did to make it do that though. Was it an app he combined into the kernel? Did he expand something?
Technically- OC"ing is just like any normal OC. INcrease the multiplier or frequency and then manipulate the voltage to handle the work. But- THe couple app i foudn that do that- like uh... setcpu, targek or something all arent supported by our rom/kernel/ something. Its rather frustrating.
With the Packman ROM im using, he combined the Performance control into the rom, and you can actually change the voltages- but.. i cant make it go faster.
TO go on with that- i still cant find a way to OC the GPU. i see people saying they got it up to 400mhz. or something. But- HOW!? an app? Kernel again!? heck, i dont even know what the stock settins are. :/
Click to expand...
Click to collapse
1. He did it by being a kernel master... 2. they aren't supported because of the kernel you're using. 3. And again, the kernel you're using. The only way to overclock the gpu is with the samurai kernel.
4. And most importantly, for everything you want out of a kernel, it's about time to learn Linux and build your own kernel...
flastnoles11 said:
3. And again, the kernel you're using. The only way to overclock the gpu is with the samurai kernel.
Click to expand...
Click to collapse
Aww man I miss Samurai's 400MHz GPU OC... But the Voodoo defaults there is VERY terrible... Just why isn't there a kernel with ONLY GPU OC (i.e. no CPU OC up to like 1.4GHz (I think games depend more badly on GPU) and no Voodoo and such)...
Sent from HTC Incredible S @ PACman v21
If you build it, they will flash it!
Yes, for those looking for an easy way out, it's not going to happen. Learn to make a kernel then learn how to manipulate the settings. If it was easy then everyone would be doing it. No one has any other spoon fed answers.
I think not having an easy way out may be the definition of xda-developers. Forget where I read it but it's about the journey rather than the destination, which I know doesn't hold true for every one but I know it does for me.

Categories

Resources