Video Review: Trident Aegis for Samsung Galaxy Nexus - Samsung Galaxy Nexus

Hey guys,
Got my hands on the new Aegis series case from Trident, this is a 2 piece hybrid style case that offers great protection. The silicone inner layer features reinforced corners for added drop protection and the plastic spine acts as a mold to keep the case rigid and strong. While it may be a bit bulky, this case offers great protection without becoming an overly large size.
Check out the full review below for more info:

Very good review.

Thanks for the review!

Thanks guys!
Sent from my Galaxy Nexus using XDA

I just got this case too and love the blue. I also have the otterbox vase and I pi k the Trident case over it luv it.
Sent from my Galaxy Nexus using Tapatalk

good review mate!!

Thanks again - to those who wanted me to review the Kraken AMS, I may still get the case but I'm more concerned with getting a Galaxy Note and the AMS for that device.

Yeah another review of the AMS Kraken case would be awesome. Im more interested in the accessories though. I would love to know a bit more about the car dock attachment. That was my biggest complaint (Other than the 3 pin connection) with the Samsung dock. There was NO room for a case or extra bulk. I want something that will protect my phone REALLY well but still be able to use maps without balancing it on my leg while driving. The Kraken and car dock accessory sounds perfect. Im just a little skeptical about dropping 65 buck on it all.

The case looks great, I'm a little wary of the silicone though.... looks like its extremely covered especially at the bottom, how does it go into pockets? Especially in denim, where my pockets are filled with lint.
The good thing about the otterbox, although the silicone does pick up a pretty significant amount of lint, there is just so little silicone that all you need to do is wipe your finger across the top and its gone.

al2x said:
The case looks great, I'm a little wary of the silicone though.... looks like its extremely covered especially at the bottom, how does it go into pockets? Especially in denim, where my pockets are filled with lint.
The good thing about the otterbox, although the silicone does pick up a pretty significant amount of lint, there is just so little silicone that all you need to do is wipe your finger across the top and its gone.
Click to expand...
Click to collapse
Goes in fine but you feel it pushing away when you remove it from pockets, nothing serious though. You're right regarding the otterbox though, I love how the silicone is covered up by the plastic.

I've got the case, I really don't like it. The hard plastic goes around 3 sides and feels good. However the bottom side, its just silicon and it flaps about a bit, comes away from the phone whenever I try to hold it or take it out of my pocket.
I'll be looking for a different case.
Previously I had an Otter case for my Galaxy S, and it was really excellent.

t0me said:
I've got the case, I really don't like it. The hard plastic goes around 3 sides and feels good. However the bottom side, its just silicon and it flaps about a bit, comes away from the phone whenever I try to hold it or take it out of my pocket.
I'll be looking for a different case.
Previously I had an Otter case for my Galaxy S, and it was really excellent.
Click to expand...
Click to collapse
This was actually one of the things keeping me from buying this case. Thank god I didn't. I kept the pop case I originally bought and haven't looked back.
Sent from my Galaxy Nexus using Tapatalk 2

t0me said:
I've got the case, I really don't like it. The hard plastic goes around 3 sides and feels good. However the bottom side, its just silicon and it flaps about a bit, comes away from the phone whenever I try to hold it or take it out of my pocket.
I'll be looking for a different case.
Previously I had an Otter case for my Galaxy S, and it was really excellent.
Click to expand...
Click to collapse
This. I completely agree. I've been using the green aegis for about 2 months. I HATE the bottom not being covered by the shell. The silicon gets caught on things. The port cover is terrible too. It will not stay in place anymore and just kinda hangs and flops there.
I love Trident cases but I can't recommend this particular case. I'm thinking of trying the Casemate Pop or Otterbox Commuter.

Reminds me of the, well, it would sound strange if I mentioned that.
Sent from my Galaxy Nexus using xda premium

Related

My Case Collection

So I'm that type of person who has a case for every day of the week. Lol
I have here in order from left to right on the picture
Case logic pouch (For Android/Windows Phones is what it said on the packaging)
Otterbox Defender
Otterbox Commuter
Generic Black TPU Case from ebay
Generic blue hard snap on case.
The leather pouch is awesome! It fits the phone naked or with any of my cases with the exception of the otterbox defender. I had a Seidio spring loaded holster for use with the Captivate+Innocase and it had a very snug fit for the Atrix+any of the other cases aside from the Defender.
The defender is actually really nice on this phone! I had it on the Captivate and it was wayyy to bulky and it made it extremely frustrating whenever you tried to touch the capacitive buttons on the bottom. With the Atrix, it doesn't add too much bulk and I can feel safe whenever I have it on my phone. I usually use this one when I know I'm going somewhere where they'll be potential damage to my phone like the beach.
The commuter is my personal favorite case! It looks real nice with the fancy design on the back. It doesn't add too much bulk, but does add a good ammount of protection. I find it strange that all the Captivate otterbox cases make the phone twice as big, but that's not the same case for the Atrix. It's even stranger that a naked Atrix is bulkier than a naked Captivate.
The generic black TPU is also pretty nice. It doesn't add much bulk at all, but TPU usually offers good protection. Mine specifically has that stupid common Argyle pattern, but it's in the inside so it's not shown on the back of my phone! The only problem I have with this case is the fact that it attracts fingerprints like no tomorrow.
The generic blue snap on case was an impulse buy when I got my phone. I just wanted to make sure it was protected out of the box. I don't really like this case too much as I'm not a big fan of hard cases to begin with.
I'm still waiting on the Candyshell, and other cases to come out. I'll update asap!
If anyone has any detailed questions about any of the cases, let me know!!!
F_L_Abs said:
So I'm that type of person who has a case for every day of the week. Lol
I have here in order from left to right on the picture
Case logic pouch (For Android/Windows Phones is what it said on the packaging)
Otterbox Defender
Otterbox Commuter
Generic Black TPU Case from ebay
Generic blue hard snap on case.
The leather pouch is awesome! It fits the phone naked or with any of my cases with the exception of the otterbox defender. I had a Seidio spring loaded holster for use with the Captivate+Innocase and it had a very snug fit for the Atrix+any of the other cases aside from the Defender.
The defender is actually really nice on this phone! I had it on the Captivate and it was wayyy to bulky and it made it extremely frustrating whenever you tried to touch the capacitive buttons on the bottom. With the Atrix, it doesn't add too much bulk and I can feel safe whenever I have it on my phone. I usually use this one when I know I'm going somewhere where they'll be potential damage to my phone like the beach.
The commuter is my personal favorite case! It looks real nice with the fancy design on the back. It doesn't add too much bulk, but does add a good ammount of protection. I find it strange that all the Captivate otterbox cases make the phone twice as big, but that's not the same case for the Atrix. It's even stranger that a naked Atrix is bulkier than a naked Captivate.
The generic black TPU is also pretty nice. It doesn't add much bulk at all, but TPU usually offers good protection. Mine specifically has that stupid common Argyle pattern, but it's in the inside so it's not shown on the back of my phone! The only problem I have with this case is the fact that it attracts fingerprints like no tomorrow.
The generic blue snap on case was an impulse buy when I got my phone. I just wanted to make sure it was protected out of the box. I don't really like this case too much as I'm not a big fan of hard cases to begin with.
I'm still waiting on the Candyshell, and other cases to come out. I'll update asap!
If anyone has any detailed questions about any of the cases, let me know!!!
Click to expand...
Click to collapse
I dont feel like a loner anymore lol! I've always been obsessed with cases. I have the OBD, OBC, Feather, Bodyglove and the Candyshell. Caint wait for Sedio to release a Active X or Rugged. I'm also hoping for some case-mates soon? Request? http://support.case-mate.com/index.php?pg=request
I'm waiting on the seidio active x with holster! I loved the seidio holster I had for my captivate! It works pretty well still with certain atrix cases, but I ended up giving it away. Lol
Not the biggest case mate fan but ill submit a request and well see ;Db
Sent from my MB860 using XDA Premium App
You are not alone I couldn't decide btwn the defender or commuter so I got both to test out in person. I ended up liking.g the commuter mainly BC I had trouble plugging in some headphone jack devices because the defender is slightly bulkier
Sent from my MB860 using XDA App
I just ordered the black tpu with the argyle pattern on the inside off Amazon. I have a question for you, the buttons for volume look molded in, how hard is it to push the buttons with the case on?
How much bulk does the commuter add? I'm thinking of picking it up but I don't want it to be fat
Sent from my MB860 using XDA App
I didn't find it harder to press at all with the tpu case. Then again that might just be me not paying full attention to it. I'm not very picky... lol
The commuter does add a bit of bulk, but I don't think its bad at all especially for the ammount of protection it adds. I do also really dig the design on the back! I heard that it won't fit with any docks though to give you an idea. I was able to dock my phone with the TPU case though.
Sent from my Desire HD using XDA Premium App
bigc_13 said:
How much bulk does the commuter add? I'm thinking of picking it up but I don't want it to be fat
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
That was my biggest concern because I didnt really want a case but didn't want a broken phone. So I got the commuter and love that it doesn't make it that much bigger but makes it feel a ton safer.
Sent from my MB860 using XDA App
I just got the TPU case... dropped it from my lap getting out of the car in a parking garage.. unscathed. great case.. doesnt look as fancy as others but it does the job and its a pretty good price.
yeah, i bought a few of those snap on hard cases just for the sake of protection, however, they are a ***** to get off! And i use my vehicle dock often, so thats a no go. I bought a clear skin (like a zaag), and havent looked back since. It actually makes the back of the phone shinny and the CF weave pattern really POP...looks more like real CF
After checked a cpl of cases for my new Atrix, I found one in HK and its dirt cheap too ($6!!). Dual material PC + TPU with transparent back, flame, scratch resistant, very light and thin, washable too. The fact I disliked about otterbox and similar heavy armed cases (aside of being very bulky) is a lack of heat dissipation.
My suggestion goes for Momax iCasePro:
http://www.momax.net/en/Product_Show.aspx?ID=1415&T=1
Top notch.
F_L_Abs said:
So I'm that type of person who has a case for every day of the week. Lol
I have here in order from left to right on the picture
Case logic pouch (For Android/Windows Phones is what it said on the packaging)
Otterbox Defender
Otterbox Commuter
Generic Black TPU Case from ebay
Generic blue hard snap on case.
The leather pouch is awesome! It fits the phone naked or with any of my cases with the exception of the otterbox defender. I had a Seidio spring loaded holster for use with the Captivate+Innocase and it had a very snug fit for the Atrix+any of the other cases aside from the Defender.
The defender is actually really nice on this phone! I had it on the Captivate and it was wayyy to bulky and it made it extremely frustrating whenever you tried to touch the capacitive buttons on the bottom. With the Atrix, it doesn't add too much bulk and I can feel safe whenever I have it on my phone. I usually use this one when I know I'm going somewhere where they'll be potential damage to my phone like the beach.
The commuter is my personal favorite case! It looks real nice with the fancy design on the back. It doesn't add too much bulk, but does add a good ammount of protection. I find it strange that all the Captivate otterbox cases make the phone twice as big, but that's not the same case for the Atrix. It's even stranger that a naked Atrix is bulkier than a naked Captivate.
The generic black TPU is also pretty nice. It doesn't add much bulk at all, but TPU usually offers good protection. Mine specifically has that stupid common Argyle pattern, but it's in the inside so it's not shown on the back of my phone! The only problem I have with this case is the fact that it attracts fingerprints like no tomorrow.
The generic blue snap on case was an impulse buy when I got my phone. I just wanted to make sure it was protected out of the box. I don't really like this case too much as I'm not a big fan of hard cases to begin with.
I'm still waiting on the Candyshell, and other cases to come out. I'll update asap!
If anyone has any detailed questions about any of the cases, let me know!!!
Click to expand...
Click to collapse
Do they have those leather cases but sideways????? I'm looking for one that will fit those tpu cases as well.
Yes they do! I bought it at a local supermarket kinda store, but I did see it at Wally World too.
The description specifically sais "for Windows and Android Phones"
Sent from my MB860 using XDA Premium App
Helpful post, I got the commuter, it's pretty good
never really saw the need for a case it makes a good phone look ugly and doesnt really protect i prefer invisible shields
Until it slips out of your hands and hits the ground and ends up looking worse than with a case..... I like the look of the commuter otter box case
Sent from my MB860 using XDA Premium App
Question for anyone that does not mind answering. I currently have the otterbox defender which I have to say I enjoy having it while I am out running around etc. Like that feeling of safety with the "hefty" case since I have large hands does not bother me to much. BUT, I was thinking of getting another case to use just around the house and thinking about the feather case or something small and minimal. I tend to set my phone face down most of the time. Any suggestions? also to expound upon that if anyone else has tried or done this before if I did that i would look into getting a adhesive screen protector. If I did that would it work with the otterbox defender and its built in screen protector would I maybe have to cut that out? Which I am not totally opposed to just seems almost like a waste. I know gorilla glass is tough stuff I am just the meticulous kind of person that if i saw the scratch on my screen I would not be able to let it go and it would drive me crazy.
Ryan,
I would suggest either the otterbox commuter (still kinda bulky, but not as bad as the defender), or the body glove mirage (nice and thin).
As far as the screen protector, I've used the matte/anti glare from att with the defender. I do kinda notice its not as responsive when I'm typing and etc, but thar might just be a mental thing.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Otterbox vs CaseMate vs Incipio for the GN

Best? Worst?
Pros and Cons?
Obivously it's a little early to have a ton of info on each (at least in the states) but I'm sure this thread will prove useful as more people at theirs.
I didnt make it out of the parking lot with the Otterbox. It's a great case and I feel like I could throw my phone off a building without any damage. However I didnt notice how much girth it added to the phone until I tried to put it in my pocket.. things a tank. Easily doubles the width, so keep that in mind if its important to you.
I have the casemate toughcase. Originally i liked it but now not so much. The silicone was a dust and pocket lint magnet and it started peeling up corners of my zagg screen protector. It just didnt fit right but i have the gsm gnex which is a tad thinner. I tested the otterbox in a vzw store tonight and i hated it. Everytime i touched the screen the protector made little tap like noises because it wasnt touching the screen. Again....i think its because the otterbox is made for the LTE nexus. I have the diztronic tpu case in matte black and also the smoke color and ive been happy with them so far. They also do not add any bulk. I have to wonder why anyone would want to get a thin and light phone only to add a bulky looking case?
I have the casemate tough case, I don't mind the dust trapping cuz it really doesn't do anything. I have the gsm version, the top and bottom part is a tinyyyy bit loose, but also doesn't bug me. The thickness is perfect and i think its as much protection as i need so... I hope that helps :0
I have case mate tough and pop case, and I highly recommend the pop case, the design, protection, feel, it sums up as the best case for me...I use otterbox for most of my devices, and the case mate pop case does not lack any of the protection compare to otterbox
takgeun68 said:
I have case mate tough and pop case, and I highly recommend the pop case, the design, protection, feel, it sums up as the best case for me...I use otterbox for most of my devices, and the case mate pop case does not lack any of the protection compare to otterbox
Click to expand...
Click to collapse
I just ordered a case mate pop. How does it seal around the front face (glass)?
Also, does the part that seals to the glass attack lint?
What about a screen protector? What is best one that doesn't make the screen feel or look weird?
Sent from my Galaxy Nexus using XDA App
takgeun68 said:
I have case mate tough and pop case, and I highly recommend the pop case, the design, protection, feel, it sums up as the best case for me...I use otterbox for most of my devices, and the case mate pop case does not lack any of the protection compare to otterbox
Click to expand...
Click to collapse
I've had the Pop for other phones. It's a nice case, my only complaint about that series is the side rubbers. They tend to wear off as time goes on and starts becoming loose.
Provides excellent protection though.
I don't have the phone yet (ordered online) but I bought the incipio case for it earlier today. Anyone else tried it on their LTE GNex? Thoughts? I didn't see a Otterbox case for it at the Verizon store.
I got the incipio case with mine when I picked it up earlier. So far, I like it, its real tight fitting and doesn't add a whole lot of thickness. Only downside is the silicone around the edges is a lint magnet while in the pocket
Sent from my Galaxy Nexus using XDA App
I have the incipio case and really like it. Fits snugly around my GSM Nexus and isn't too big. I had the Case Mate tough case with my S II and just found it too big
Sent from my Galaxy Nexus
Sedio has some really nice cases. I have had one for nearly 2 years now for my original Droid. It has protected it well although it did crack eventually after many drops.
I also bought the sedio car mount/charger and really liked that as well.
Sedio is a bit pricey... 2 years ago the car charger mount was at least $50 and the case was $20-$25. It was a very thin form fitting case that is plastic but has a almost rubbery feel to it. Very tough and it barley added any thickness to my Droid which was amazing. Guess that is why it was so pricey.
I got the shell holster charger combo when I ordered my GN yesterday... waiting for it to arrive... as patiently as I can!
I tried the Otterbox in the VZW store on my GNex -- certainly looked industrial and protective, but it made the phone huge. The Incipio seemed like a good compromise - the rubber inner part goes on easily, and the plastic snap-over layer keeps it nice and snug to the phone. The egde protrudes just enough so that you can place the phone glass down without the glass touching a table - perfect.
No screen protector yet - and I may not. It may not be Gorilla Glass, but it's been shown to be "fortified", and I won't put it in my pocket with keys or change... The Incipio seems like a good choice so far...
Anyone have a link for the black Case-Mate Pop case? I can only seem to find the white one.
EDIT: Nevermind, I'm an idiot
jonazen said:
I tried the Otterbox in the VZW store on my GNex -- certainly looked industrial and protective, but it made the phone huge. The Incipio seemed like a good compromise - the rubber inner part goes on easily, and the plastic snap-over layer keeps it nice and snug to the phone. The egde protrudes just enough so that you can place the phone glass down without the glass touching a table - perfect.
No screen protector yet - and I may not. It may not be Gorilla Glass, but it's been shown to be "fortified", and I won't put it in my pocket with keys or change... The Incipio seems like a good choice so far...
Click to expand...
Click to collapse
The Defender (The more expensive, bigger one) or the Commuter?
So I've already ordered the Case Mate Tough, because I didn't know there was a Pop for the Nexus yet.
They don't show it listed on the actual Case Mate site Nexus page.
What are the differences between the Tough and the Pop?
solid009 said:
I got the incipio case with mine when I picked it up earlier. So far, I like it, its real tight fitting and doesn't add a whole lot of thickness. Only downside is the silicone around the edges is a lint magnet while in the pocket
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
I have the Otterbox Commuter for my Razr and it looks like the silicone shares the same properties of picking up everything in my pocket. lol
I really like the Case-Mate Tough Case which I had with my HTC Sensation and it didn't pick up as much lint as the Otterbox commute or now possibly the Incipio.
I can't wait for my phone to arrive so I can finally try for myself.
Thanks!
carnagey said:
Sedio has some really nice cases. I have had one for nearly 2 years now for my original Droid. It has protected it well although it did crack eventually after many drops.
I also bought the sedio car mount/charger and really liked that as well.
Sedio is a bit pricey... 2 years ago the car charger mount was at least $50 and the case was $20-$25. It was a very thin form fitting case that is plastic but has a almost rubbery feel to it. Very tough and it barley added any thickness to my Droid which was amazing. Guess that is why it was so pricey.
I got the shell holster charger combo when I ordered my GN yesterday... waiting for it to arrive... as patiently as I can!
Click to expand...
Click to collapse
If you google Seidio, Case-mate, and Otterbox... you will find lots and lots of people complaining about their Seidio cases. I have owned a few and will not buy from them again.
---------- Post added at 07:22 PM ---------- Previous post was at 07:22 PM ----------
Celeras said:
I didnt make it out of the parking lot with the Otterbox. It's a great case and I feel like I could throw my phone off a building without any damage. However I didnt notice how much girth it added to the phone until I tried to put it in my pocket.. things a tank. Easily doubles the width, so keep that in mind if its important to you.
Click to expand...
Click to collapse
Commuter or Defender?
the question is which of these fit the GSM Version well.
Diztronic only $10 from eBay. Perfect fit and no bulkiness added.
I have the GSM version as well
Sent from my Galaxy Nexus using xda premium

[Review] Trident Kraken AMS on GSM Nexus

First of all, i would like to thank the people over at Trident (www.tridentcase.com) for sending this case out to me.
Packaging - The box is pretty simple. Shows the product and the different colors it comes in. Black, Red, Pink, Green, and Blue. i will be showing off the black model. Inside the box comes a screen protector kit, which includes the screen protector, microfiber cloth and a applicator/squeegee card. The case retails for $49.95.
Case - The Kraken AMS case is a heady duty 3-Layer case which features a shock absorbing silicone, a polycarbonate plastic shell, rubber dust covers over the microphone and speaker, rubber covers over ports (charger and headset), and holster. The silicone part, or Perseus can be used as a stand alone case on days that you don’t need maximum protection, but will still give u good drop and scratch protection. The two polycarbonate shells cover the silicone to make the case durable. The case has a nice lip around the screen for a lay on table design. One accessory that the case comes with is a really durable metal kickstand. They also have other Kraken accessories which make the case more usable in everyday life. such as an AMS Bike Clip, AMS Tripod Mount, AMS Headphone Organizer, AMS Seatbelt Clip, and AMS Windshield Mount.
Thoughts - My thought on the case are it is made of very high grade materials. everything fits. cutouts are precise. I’ve only had the case for a few hours and i love it. the silicone is way much better than the otterbox defender. it feels of quality and doesn't attract lint. the volume and power buttons feel better than the naked buttons to me. the kickstand is SOLID and does its job great. the holster is just as heavy duty as the case and rotates so you can wear it comfortably. i will update the in a few days to give more opinions...
Pics - I will have pics of the phone with the case tomorrow, as my nexus is my only camera at the moment.
http://imm.io/iJnX
http://imm.io/iJoQ
http://imm.io/iJpn
http://imm.io/iJpw
http://imm.io/iJpJ
http://imm.io/iJpR
http://imm.io/iJqe
http://imm.io/iJqn
Conclusion - I think the case is well worth the $50 you are paying. you are getting a heavy duty case that can be used as a lightweight case also that provides an ample amount of protection. I would definitely recommend this case to anyone who is looking for an overall great case that will add bulk to your device.
if u feel i left something out or want to ask a question. go ahead. thanks.
But will it blend? http://www.youtube.com/watch?v=lAl28d6tbko&feature=youtube_gdata_player
Seriosly though, If this fit a mugen 4000 battery id buy it. But so many premium cases none of them expandable
Sent from my Galaxy Nexus using Tapatalk
what do u mean by blend.?
rlamontjr said:
what do u mean by blend.?
Click to expand...
Click to collapse
Never seen the "Will It Blend?" videos?
http://www.youtube.com/user/Blendtec?feature=watch
Can't wait to see some pictures of the phone inside the case.
Some questions...
First, how do the two plastic pieces (the front and back) fit together?
On my otterbox defender, they just snap together with some tiny little clips and after about two drops 3 out of 4 clips are already broken so the only thing holding them together is the silicone cover that goes on the outside. I'm hoping the kraken is a lot more rugged in that aspect... The otterbox is great at protecting the phone but the case itself is already trashed after a few drops which isn't cool.
Second, how bulky is the kraken? It looks bulkier than the otterbox defender, especially on the sides since it looks like it has a ridge sticking out from either side of the screen. Does it feel good in the hand? My defender definitely makes the phone about 30% thicker which makes it less comfortable to hold but I've gotten used to it. Don't know how I'd feel about the ridges on the Kraken however.
Anyway thanks for the review.
Sent from my Galaxy Nexus using xda premium
hmmmm. might just scratch, but not blend.
the two plastic pieces fit together nice and tight. the top and bottom are snap together. but the sides are actually placed in slots, it can be slight difficult to remove if u don't have nails. but i see that as a good thing. the Kraken would take some time to show wear and tear.
it may b just a tad bit bulkier, but the grip is a for sure thing. the poly carbonate is not glossy but isn't matte. it's sort of in between but doesn't show finger prints. the sides have ridges for better grip as well. i actually thought the defender felt great in hand, maybe because i have small hands tho.
few more pics.
http://imm.io/iLsD
http://imm.io/iLsR
http://imm.io/iLsX
Has anyone tried one of these with the extended battery? Looking forward to pics of the phone in the case.
More Pics...
http://imm.io/iWzQ
http://imm.io/iWzZ
http://imm.io/iWAd
http://imm.io/iWAn
http://imm.io/iWAz
http://imm.io/iWAI
http://imm.io/iWAR
http://imm.io/iWAY
http://imm.io/iWBl
http://imm.io/iWBF
the case fits the GSM extended battery with no problems at all.
Does this case make it hard to press the volume and power buttons? And it seems to cover up the notification light at the bottom doesn't it?
the buttons are the best thing on the case IMO. and the notification light isnt covered.
rlamontjr said:
the buttons are the best thing on the case IMO. and the notification light isnt covered.
Click to expand...
Click to collapse
Thank you! I will probably be ordering the phone, this case and the 2000 mAh battery all today then
Ngo93 said:
Thank you! I will probably be ordering the phone, this case and the 2000 mAh battery all today then
Click to expand...
Click to collapse
HI, just wondering if you wound up getting the 2000mah battery afterall and if so, how well it fits.
if it fits 100 percent with extended battery im a get one to
i recently bought one it appears the notification light is 40% block.. i'm using the standard battery gsm version could that be the reason i wonder
I have the same case with the extended battery (Sprint) and everything fits perfectly. The notification light is about 50% blocked but I dont use it anyways so it did not bother me much. The notification bar is easy to pull down with no interference with the top of the case like with the otterbox. The case can take a beating I have drop tested survived a 12ft drop. Even though it adds bulk because it is hard polycarbonate on the outside it makes it really easy to get in and out of pockets even with tighter fitting jeans.
Also if you have a Costco or Sams Club near by you can pick up the case for $30 instead of $50.
Seidio convert is better.. options for all gnex models and batteries
Sent from my Full AOSP on Toro-VZW using xda app-developers app
After a couple of months, do you guys still recommend the Kraken?
saintpanache
saintpanache said:
After a couple of months, do you guys still recommend the Kraken?
saintpanache
Click to expand...
Click to collapse
I would recommend it if you are looking for a case that offers similar or even more protection than the Otterbox Defender. The case adds quite a bit of bulk to your phone though so that may turn off some people.
Throughout the work week, usually switch between the Kraken, Otterbox Commuter, and the SGP leather pouch. The Kraken will be used only if I have to go out to do field work.
The Commuter is only used if I feel like I don't want to use the SGP pouch. Otherwise I end up using the SGP pouch most of the time on the slower days of work where I'm just stuck in the office.
I'm leaning toward the Kraken because I've read a couple of story about how the Otterbox defender was scratching phones.
I have a commuter right now but I need something more rugged for work and also to protect my GNex from my crazy kids
saintpanache
If that's the case, the Kraken would be a good purchase for you. My Kraken case has held up well when I drop my phone when I'm out doing field work. Very durable and well worth it!

[POLL]Pick your Otterbox!

Pick your Otterbox!
Description:
So we all know Otterbox has decided to release their line for the Samsung Galaxy SIII.
This means adequate protection for your phone even for the most paranoid users! The
Otterbox cases have been known to be designed with the best quality in mind. Today
a poll will be started for the Otterbox cases for people to list their favorite, why it is there
favorite and concerns they may have with the case. Information for the cases will be provided
below with an image of each case!
Case #1: The Commuter!
Built with your hectic life in mind, the Commuter Series Samsung Galaxy S3 case provides protection against
oopsies and accidents without being too bulky for your pocket or purse. The Commuter Series offers two layers
of protection for your highly connected lifestyle. The durable silicone inner layer snugly cushions and absorbs
the Galaxy S3 from impact while the polycarbonate outer layer provides solid impact protection without being too
big or bulky. Silicone plugs cover the main openings of the Galaxy S3, including the volume controls, power button,
headphone jack and charging port. The Galaxy S3 Commuter Series case maintains complete functionality of the
device so you can stay connected while being protected. It’s not just a case. It’s an OtterBox.
Case #2: The Defender!
The Defender Series Samsung Galaxy S3 case offers three layers of protection so you don’t have to fear the inevitable
oopsie or accident. The two-piece polycarbonate inner layer snaps together around the device to form a secure foundation.
The inner layer includes a built-in screen protector that prevents scratches while interior memory foam pads cradle the
device to provide added shock absorption. The outer layer is made up of rugged silicone that wraps around the inner
layer to absorb impact. The Defender Series comes with a ratcheting belt holster that can also double as a viewing stand.
Case #3: The Defender with Camo!
Sport your favorite camo pattern for your Samsung Galaxy S3 with our Defender Series Realtree case. With three layers of
rugged protection, you don’t have to worry about dropping it. The two-piece polycarbonate inner layer snaps around the device
to form a secure foundation. The inner layer includes a built-in screen protector that prevents scratches while memory foam
pads cradle the device to provide added shock absorption. The outer silicone layer wraps around the inner layer to complete
the case and also absorb impact. The Defender Series comes with a ratcheting belt-clip holster that can also double as a viewing stand.
GO AHEAD AND VOTE NOW! CLICK ON THE IMAGE FOR THE LINK TO THE OTTERBOX WEBSITE!!!​
Otterbox in white / grey.
no go
1SiK1500 said:
Otterbox in white / grey.
Click to expand...
Click to collapse
Bought the Commuter, returning it tomorrow, the side buttons are a nightmare to push! Put my phone back into the Speck candyapple case and the buttons are smooth as silk. This a deal breaker for me.
CC
i hope the # 2 case is a little better because i have the #2 case in the mail i hope i dont have to return it
I have the Commuter. As cc999 said, the side lock button is a nightmare to press. You have to press it hard. No exaggeration. Thankfully the screen can be unlocked using the hardware home button. The volume buttons are hard but their not that bad. Funny thing is I had the Commuter on my Galaxy S2 and it was an amazing case. Used to drop the phone on purpose because I could, lol.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I had the Commuter and swapped it for a Trident Aegis. I got used to the Aegis with my Epic Touch, being able to actually feel the power button press.
Otterbox cases are really ugly, and they look big and bulky.
cc999 said:
Bought the Commuter, returning it tomorrow, the side buttons are a nightmare to push! Put my phone back into the Speck candyapple case and the buttons are smooth as silk. This a deal breaker for me.
CC
Click to expand...
Click to collapse
+1 (or is that -1?) from another dissatisfied Commuter. Incipio saved the day for me.
Sunsparc said:
I had the Commuter and swapped it for a Trident Aegis. I got used to the Aegis with my Epic Touch, being able to actually feel the power button press.
Click to expand...
Click to collapse
Yeah,... that Aegis on the Epic Touch is a nice match, I have to agree. The Aegis was the first and only case I put on the S2. After my struggles with Otterbox and the flappy-n-loose fit on the Evo 3D and the original Evo, I decided to do Trident. Not a big fan of the Aegis styling tho,... kinda reminds me of all the glass figures at my elderly aunts house if you know what I mean. Those uneven sides and not one corner looking like no other styling was a bit too much for me. I also noticed from the pics, that Aegis is now doing the same thing that I thought was not very smart on the part of Otterbox. They've decided to do away with outer shell support for the silicon inner layer on the top and bottom of the phone. I can almost predict that the silicon top-n-bottom will stretch and loose their fit after a few weeks,... just like it did with the Otterbox. I think Otterbox learned from that and on their S3 Commuter, designed the outer shell to give symmetrical support for the silicon inner layer on all four sides. What scares me now is all the not so good reports about how they thought out protection for the power button and volume rockers. If things are as bad as I'm reading, the Commuter that's on its way here will be returned. I have the Defender on S3 #1 now and it's a solid 'Go'. Hoping to dress S3 #2 in the Commuter.
---------- Post added at 08:20 PM ---------- Previous post was at 07:52 PM ----------
SamsungVibrant said:
Otterbox cases are really ugly, and they look big and bulky.
Click to expand...
Click to collapse
Yeah, they are a little industrial looking. But that's a good look for me. They're not as bulky as they look once you get it on. Internet pics don't help either with that feeling,... nor does seeing the Defenders on all our friends iPhones and older phones. I've seen a couple Defenders on evo 3D's and man were they were massive. But looking at the Defender on a S3's is so different. Now if you wanna really see bulk, check out the Kraken or anything from Ballistic!
cc999 said:
Bought the Commuter, returning it tomorrow, the side buttons are a nightmare to push! Put my phone back into the Speck candyapple case and the buttons are smooth as silk. This a deal breaker for me.
CC
Click to expand...
Click to collapse
This is why I will never get another Otterbox
JLine05 said:
This is why I will never get another Otterbox
Click to expand...
Click to collapse
I have the commuter but I'm looking for something else because of the buttons, so stiff. I mostly keep my phone in my pocket at work so I need something slim but durable. Any recos?
I would go with a bulkier case. The phone has to look like a brick.
I got the Commuter (black) because I don't have any use for a holster Loving it. Only sticking point is I have to press the power/volume buttons pretty hard since it's basically a rubber knob overlay on top of the actual keys.
GenericAsianGuy said:
I got the Commuter (black) because I don't have any use for a holster Loving it. Only sticking point is I have to press the power/volume buttons pretty hard since it's basically a rubber knob overlay on top of the actual keys.
Click to expand...
Click to collapse
I ordered the defender (glacier white) from J&R for$24.99, hasn't shipped yet.
Lmao,..the buttons were a little stiff at first, but there not hard at all after having it for a while,..my 4 year old doesn't even have any problems turning my phone on that's for sure,..im sure I'll get another case when more are available, but for now,I like the commuter
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
louiscyphere13 said:
Lmao,..the buttons were a little stiff at first, but there not hard at all after having it for a while,..my 4 year old doesn't even have any problems turning my phone on that's for sure,..im sure I'll get another case when more are available, but for now,I like the commuter
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
LOL! I sorta agree with Louis. I just got my commuter from J&R and like the reports say, the buttons are kinda stiff. But after holding it in my hands, I'm thinking they'll loosen up a little over time too. Let's just say I hope they will! But the case itself is a definite Go!
Sent from my SPH-L710 using xda premium
Just got my free Two Otterbox Defender cases from AT&T today. Case is awesome! Fits perfect and buttons are easy to press. No complaints here.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Commuter with the Seidio Active holster. Nice solid combo so far.
Had the defender for about a week now. Fits great and buttons are easy to press.
wildgamer100 said:
Had the defender for about a week now. Fits great and buttons are easy to press.
Click to expand...
Click to collapse
Just got mine today at AT&T, it was for 50 bucks but the guy gave me a 25 percent discount,, and yes buttons are really easy to press, I'm happy with mine as well
Sent from my SGH-T999 using xda app-developers app

Which case for SG2 i9100 + protection

Hello, guys
I'm looking for a good case for my GS2 i9100...
It has to be: dual layer protection...
I found those two: Otterbox commuter series, and Mate-case tough.
Which one is the best? Or, are there other good cases on the market?
And if you got one, what are your experiences?
I have the Trident Aegis case and I really recommend it. I looked at the Otterbox Commuter but the back was slicker than what I wanted because I tend to have things fall out of my pockets and I didn't want my phone to be one of them. The Trident Aegis has a silicone underlayer that reveals itself at the bulked up corners and bevel, and has headphone and charging jack cover flaps to keep dust out. It's top layer is hard plastic but it has almost a soft, smooth texture to it that doesn't slide around as much. I've dropped this phone at least 10 times already and it's completely unscathed. Definitely check it out.
stastos said:
I have the Trident Aegis case and I really recommend it. I looked at the Otterbox Commuter but the back was slicker than what I wanted because I tend to have things fall out of my pockets and I didn't want my phone to be one of them. The Trident Aegis has a silicone underlayer that reveals itself at the bulked up corners and bevel, and has headphone and charging jack cover flaps to keep dust out. It's top layer is hard plastic but it has almost a soft, smooth texture to it that doesn't slide around as much. I've dropped this phone at least 10 times already and it's completely unscathed. Definitely check it out.
Click to expand...
Click to collapse
Thnx, I will check those out
stastos said:
I have the Trident Aegis case and I really recommend it. I looked at the Otterbox Commuter but the back was slicker than what I wanted because I tend to have things fall out of my pockets and I didn't want my phone to be one of them. The Trident Aegis has a silicone underlayer that reveals itself at the bulked up corners and bevel, and has headphone and charging jack cover flaps to keep dust out. It's top layer is hard plastic but it has almost a soft, smooth texture to it that doesn't slide around as much. I've dropped this phone at least 10 times already and it's completely unscathed. Definitely check it out.
Click to expand...
Click to collapse
I looked at it, it seems give good protection to your phone, fit nicely, but it looks a little too bulky for me..
In my opinion Trident has the most protective cases while otter box may be more practical if you don't need the extra level of safety
Sent from my GT-I9100 using xda premium
freshlycutlawn said:
In my opinion Trident has the most protective cases while otter box may be more practical if you don't need the extra level of safety
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thank you,
I was looking for a cover where my phone was protected, the cover had to be good protection, but also a little stylish, not to bulky.
I also think trident and ballistic has the best protection, but I dont like the look so much...
So I made my decision and ordered a mate-case tough...
But I also need a good screen protection (but not too expensive), because I put my phone always in my pocket, sometimes with keys...
I always had a flipcover, that gives also protection for my screen... But I bought also the Exomount 2: universal car mount, which is an awesome mount, I'm very happy with that...
However with a mount, you can't use a flipcover, because you have to flip the cover to the back... So It wont fit nicely... (I hope you understand what i'm trying to say).
So I had to make a decision... A flipcover so I would protect my screen of scratches of my keys (but difficult to use in the car mount) OR a dual layer protected cover without a flipcover + screen protector... (and easy to use in the car mount)
So I want to use the cover anytime and everywhere... (I'm not planning for changing covers for each event), so it had to be a little stylish and not too bulky...
I hope that I made the right decision...

Categories

Resources